B94-BHC624Bluetooth Headset

Authorization on Behalf of Hewlett-Packard Company For the US Federal Communications Commission Office of Engineering and Technology and Other FCC Programs and Offices 1. I, David P. Adams, am Canada/USA Technical Regulations Manager for Hewlett-Packard Company (“Hewlett-Packard”) and Applicant/Grantee Contact of Record for Hewlett-Packard together with its subsidiaries and affiliates worldwide (collectively, “HP”) for HP’s dealings with the United States Federal Communications Commission (“FCC”). I am duly authorized by HP to make this Authorization on HP’s behalf. 2. This Authorization replaces that dated September 24, 2012 for the person named below to act on my behalf and HP’s behalf as authorized agent and representative, until further notice, with the additional power to designate one or more third party agents for HP with regard to particular matters and applications. All acts carried out and requests made by this named representative relating to any matter before the FCC, including requests for confidentiality, shall have the same effect as mine. Name: Rong-Chiao Liang Title: Product Regulations Engineer Address: HP Taiwan Ltd 10-F1, No. 66 Jingmao 2 nd Rd NanGang District Taipei, Taiwan 11568 Telephone: 866 2 87228684 E-mail: [email protected] 3. Questions about the scope and effect of this Authorization should be addressed as follows: David P. Adams Canada/USA Region Technical Regulations Manager 1501 Page Mill Road, MS 1419 Palo Alto, CA 94304-1126 650 258 7586 Telephone [email protected] 4. I declare under penalty of perjury that the foregoing is true and correct, and that this Authorization was executed at Palo Alto, California, on the date indicated below my signature. ____________________________ Signature David P. Adams Canada/USA Technical Regulations Manager Hewlett-Packard Company __ April 2, 2014__________ Date

Appendix P Photo Documentation Page 1 of 2 10048234 001; 10048231 001; 10048230 001; 10048235 001 Product: Brand Name: HP H5000 BT Stereo Headset HP Type Identification: BHC624 Appendix P Photo Documentation Page 2 of 2 10048234 001; 10048231 001; 10048230 001; 10048235 001 Product: Brand Name: HP H5000 BT Stereo Headset HP Type Identification: BHC624

Appendix P Photo Documentation Page 1 of 3 10048234 001; 10048231 001; 10048230 001; 10048235 001 Product: Brand Name: HP H5000 BT Stereo Headset HP Type Identification: BHC624 Appendix P Photo Documentation Page 2 of 3 10048234 001; 10048231 001; 10048230 001; 10048235 001 Product: Brand Name: HP H5000 BT Stereo Headset HP Type Identification: BHC624 Appendix P Photo Documentation Page 3 of 3 10048234 001; 10048231 001; 10048230 001; 10048235 001 Product: Brand Name: HP H5000 BT Stereo Headset HP Type Identification: BHC624 Printed Antenna

Produkte Products Prüfbericht - Nr.: Test Report No. 10048234 001 Seite 44 von 47 Page 44 of 47 6. Safety Human exposure 6.1 Radio Frequency Exposure Compliance 6.1.1 Electromagnetic Fields RESULT: Passed Test standard : FCC KDB Publication 447498 The maximum peak output power of the transmitter is 3.1 mW. The separation between hand and antenna is more than 2mm. Hence the EUT is exclueded from SAR evaluation. Please also refer to FCC KDB publication 447498 D01 v05: Mobile Portable RF Exposure

Produkte Products Prüfbericht - Nr.: Test Report No. 10048234 001 Seite 2 von 47 Page 2 of 47 TEST SUMMARY 5.1.1 ANTENNA REQUIREMENT RESULT: Passed 5.1.2 PEAK OUTPUT POWER RESULT: Passed 5.1.3 20DB BANDWIDTH RESULT: Passed 5.1.4 99% BANDWIDTH RESULT: Passed 5.1.5 CONDUCTED SPURIOUS EMISSIONS AND FREQUENCY BAND EDGE MEASURED IN 100KHZ BANDWIDTH RESULT: Passed 5.1.6 SPURIOUS EMISSION RESULT: Passed 5.1.7 FREQUENCY SEPARATION RESULT: Passed 5.1.8 NUMBER OF HOPPING FREQUENCY RESULT: Passed 5.1.9 TIME OF OCCUPANCY RESULT: Passed 6.1.1 ELECTROMAGNETIC FIELDS RESULT: Passed Produkte Products Prüfbericht - Nr.: Test Report No. 10048234 001 Seite 3 von 47 Page 3 of 47 Contents 1. GENERAL REMARKS ............................................................................................... 5 1.1 COMPLEMENTARY MATERIALS ................................................................................. 5 2. TEST SITES ............................................................................................................ 6 2.1 TEST FACILITIES ..................................................................................................... 6 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS ...................................................... 7 2.3 TRACEABILITY ........................................................................................................ 8 2.4 CALIBRATION ......................................................................................................... 8 2.5 MEASUREMENT UNCERTAINTY ................................................................................. 8 3. GENERAL PRODUCT INFORMATION ........................................................................... 9 3.1 PRODUCT FUNCTION AND INTENDED USE ................................................................. 9 3.2 SYSTEM DETAILS AND RATINGS ............................................................................... 9 3.3 INDEPENDENT OPERATION MODES ......................................................................... 10 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS ............................................ 11 3.5 SUBMITTED DOCUMENTS ....................................................................................... 11 4. TEST SET-UP AND OPERATION MODES ................................................................... 12 4.1 PRINCIPLE OF CONFIGURATION SELECTION ............................................................ 12 4.2 TEST OPERATION AND TEST SOFTWARE................................................................. 12 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ............................................... 12 4.4 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE .............................................. 13 4.5 TEST SETUP DIAGRAM .......................................................................................... 13 5. TEST RESULTS ..................................................................................................... 15 5.1 TRANSMITTER REQUIREMENT & TEST SUITES ......................................................... 15 5.1.1 Antenna Requirement ................................................................................................................ 15 5.1.2 Peak Output Power .................................................................................................................... 16 5.1.3 20dB Bandwidth ......................................................................................................................... 20 5.1.4 99% Bandwidth .......................................................................................................................... 24 5.1.5 Conducted spurious emissions and Frequency Band Edge measured in 100kHz Bandwidth ................................................................................................................................... 28 5.1.6 Spurious Emission ..................................................................................................................... 36 5.1.7 Frequency Separation ................................................................................................................ 37 5.1.8 Number of hopping frequency .................................................................................................... 39 5.1.9 Time of Occupancy .................................................................................................................... 41 6. SAFETY HUMAN EXPOSURE ................................................................................... 44 6.1 RADIO FREQUENCY EXPOSURE COMPLIANCE ......................................................... 44 6.1.1 Electromagnetic Fields ............................................................................................................... 44 Produkte Products Prüfbericht - Nr.: Test Report No. 10048234 001 Seite 4 von 47 Page 4 of 47 7. PHOTOGRAPHS OF THE TEST SET-UP ..................................................................... 45 8. LIST OF TABLES ................................................................................................... 47 9. LIST OF PHOTOGRAPHS......................................................................................... 47 Produkte Products Prüfbericht - Nr.: Test Report No. 10048234 001 Seite 5 von 47 Page 5 of 47 1. General Remarks 1.1 Complementary Materials All attachments are integral parts of this test report. This applies especially to the following appendix: Appendix P: Photo Documentation (File Name: 10048234APPENDIX P) Appendix D: Test Result of Radiated Emissions (File Name: 10048234APPENDIX D) Test Specifications The following standards were applied Table 1: Applied Standard and Test Levels Radio FCC CFR47 Part 15: Subpart C Section 15.247 ANSI C63.4:2009, Public Notice DA 00-705 Produkte Products Prüfbericht - Nr.: Test Report No. 10048234 001 Seite 6 von 47 Page 6 of 47 2. Test Sites 2.1 Test Facilities TUV Rhein…

Text truncated - open the document above for the full version.

Produkte Products Prüfbericht - Nr.: Test Report No. 10048234 001 Seite 45 von 47 Page 45 of 47 7. Photographs of the Test Set-Up Photograph 1: Set-up for Spurious Emissions (Front View) Photograph 2: Set-up for Spurious Emissions (Back View 1) Produkte Products Prüfbericht - Nr.: Test Report No. 10048234 001 Seite 46 von 47 Page 46 of 47 Photograph 3: Set-up for Spurious Emissions (Back View 2) Photograph 4: Set-up for Conducted testing

Produkte Products Prüfbericht - Nr.: Test Report No. 10048234 001 Seite 45 von 47 Page 45 of 47 7. Photographs of the Test Set-Up Photograph 1: Set-up for Spurious Emissions (Front View) Photograph 2: Set-up for Spurious Emissions (Back View 1) Produkte Products Prüfbericht - Nr.: Test Report No. 10048234 001 Seite 46 von 47 Page 46 of 47 Photograph 3: Set-up for Spurious Emissions (Back View 2) Photograph 4: Set-up for Conducted testing