B94-HXGC241Wireless Gaming Controller

Date: 2025-11-12 FCC ID: B94-HXGC241 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing HP Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing HP Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------------- Vanessa Tsai, Product Compliance Engineer HP Inc. Tel: +886 932285270 E-mail: [email protected]

U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company name: HP Inc. Grantee Code: B94 FRN: 0025126541 Contact Name: Richard P. Tarsio Street Address: 3390 East Harmony Road City/Province/Zip: Fort Collins Colorado 80528 United States Telephone No: +1 970 898 8713 Email: richard.tarsio @hp.com This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Vanessa Tsai Date: 2024-02-02 Signed by (printed name): ----------------------------------------------- Name: Vanessa Tsai Title: Product Compliance Engineer Tel: +886 932285270 E-mail: [email protected]

Date: 2025-11-12 FCC ID: B94-HXGC241 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------------------------- Vanessa Tsai, Product Compliance Engineer HP Inc. Tel: +886 932285270 E-mail: [email protected]

Date: 2025-11-12 FCC ID: B94-HXGC241 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 2026/4/30 the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------------------------- Vanessa Tsai, Product Compliance Engineer HP Inc. Tel: +886 932285270 E-mail: [email protected]

Date: 2025-11-12 FCC ID: B94-HXGC241 AUTHORIZATION LETTER To Whom It May Concern: HP Inc. hereby authorizes Emerald Chen / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Emerald Chen / Specialist of BV CPS Taoyuan on HP Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------------- Vanessa Tsai, Product Compliance Engineer HP Inc. Tel: +886 932285270 E-mail: [email protected]

SAR Test Report Report Format Version 8.0.0 Page No. : 1 of 25 Report No. : SFCICG-WTW-P25010386 Issued Date : Jul. 28, 2025 SAR Test Report FCC Rule Part : CFR §2.1093 Standards : IEEE STD 1528:2013, KDB 865664 D01 V01R04, KDB 865664 D02 V01R02, KDB 447498 D01 V06 Report No. : SFCICG-WTW-P25010386 Applicant : HP Inc. Address : 3390 East Harmony Road, Fort Collins, Colorado United States 80528 Product : Wireless Gaming Controller FCC ID : B94-HXGC241 Brand : HYPERX Model No. : HXGC241 Sample Received Date : Jan. 21, 2025 Date of Testing : Mar. 19, 2025 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan FCC Accredited No. : TW0003 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Lena Wang / Specialist Approved By : Gordon Lin / Manager This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. SAR Test Report Report Format Version 8.0.0 Page No. : 2 of 25 Report No. : SFCICG-WTW-P25010386 Issued Date : Jul. 28, 2025 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Test Reference Guidance ...................................................................................................................................................... 4 2. Summary of Maximum SAR Value ....................................................................................................................................... 5 3. Description of Equipment Under Test ................................................................................................................................. 6 4. SAR Measurement System ................................................................................................................................................... 7 4.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 7 4.2 SPEAG DASY6 System ............................................................................................................................................... 7 4.2.1 Robot ............................................................................................................................................................... 8 4.2.2 Probes ............................................................................................................................................................. 9 4.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 9 4.2.4 Phantoms ......................................................................................................................................................... 9 4.2.5 Device Holder ................................................................................................................................................ 10 4.2.6 System Validation Dipoles ............................................................................................................................. 11 4.2.7 Power Source ................................................................................................................................................ 11 4.2.8 Tissue Simulating Liquids .............................................................................................................................. 12 4.3 SAR System Verification ............................................................................................................................................ 14 4.4 SAR Measurement Procedure .....…

Text truncated - open the document above for the full version.

Plots of System Verification Appendix A. Plots of System Verification The plots for system verification are shown as follows. Report No.: SFCICG-WTW-P25010386 Plots of System Verification Measurement Report S01 System Check_H2450_250319 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type D2450V2, 10.0 x 10.0 x 290.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 2450.000, 0 7.33 1.81 39.4 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 1988 H19T27N5 , 2025-Mar-19 EX3DV4 - SN7555, 2024-04-24 DAE4 Sn1698, 2024-11-20 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 48.0 x 96.0 35.0 x 35.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2025-03-19 2025-03-19 psSAR1g [W/kg] 2.52 2.44 psSAR10g [W/kg] 1.16 1.13 Power Drift [dB] -0.00 0.01 Report No.: SFCICG-WTW-P25010386 Plots of System Verification Measurement Report S02 System Check_H2450_250319 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type D2450V2, 10.0 x 10.0 x 290.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , CW, 0-- 2450.000, 0 7.33 1.81 39.4 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 1988 H19T27N5 , 2025-Mar-19 EX3DV4 - SN7555, 2024-04-24 DAE4 Sn1698, 2024-11-20 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 48.0 x 96.0 35.0 x 35.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2025-03-19 2025-03-19 psSAR1g [W/kg] 2.52 2.44 psSAR10g [W/kg] 1.16 1.13 Power Drift [dB] -0.00 0.01 Report No.: SFCICG-WTW-P25010386 Plots of Measurement Appendix B. Plots of Measurement The SAR plots for highest measured SAR in each exposure configuration, wireless mode and frequency band combination are shown as follows. Report No.: SFCICG-WTW-P25010386 Plots of Measurement Measurement Report P01 BT_LE-1M_Top Curve_0mm_CH19_Battery A_Ant 0 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type P25010386 130.0 x 80.0 x 40.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Top Curve, 0.00 ISM 2.4 GHz Band Bluetooth, 10670-AAA 2440.000, 19 7.33 1.80 39.4 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 1988 H19T27N5 , 2025-Mar-19 EX3DV4 - SN7555, 2024-04-24 DAE4 Sn1698, 2024-11-20 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 168.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2025-03-19 2025-03-19 psSAR1g [W/kg] 0.067 0.070 psSAR10g [W/kg] 0.031 0.029 Power Drift [dB] 0.03 -0.03 M2/M1 [%] 46.6 Dist 3dB Peak [mm] 6.4 Report No.: SFCICG-WTW-P25010386 Plots of Measurement Measurement Report P02 SRD_2.4G GIP(π/4-DQPSK)_Top Curve_0mm_CH19_Battery A_Ant 0 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type P25010386 130.0 x 80.0 x 40.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Top Curve, 0.00 ISM 2.4 GHz Band Bluetooth, 10035-CAA 2440.000, 19 7.33 1.80 39.4 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 1988 H19T27N5 , 2025-Mar-19 EX3DV4 - SN7555, 2024-04-24 DAE4 Sn1698, 2024-11-20 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 144.0 x 168.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2025-03-19 2025-03-19 psSAR1g [W/kg] 0.043 0.047 psSAR10g [W/kg] 0.020 0.019 Power Drift [dB] 0.18 0.03 M2/M1 [%] 45.0 Dist 3dB Peak [mm] 6.8 Report No.: SFCICG-WTW-P25010386 Appendix C. Tissue & System Verification The measuring results for tissue simulating liquid and system check are shown as below. Note: 1. For Section 4.3, the dielectric properties of the tissue simulating liquid have been measured within 24 hours before the SAR testing and within ±10 % of the target values. Liquid temperature during the SAR testing has kept within ±2 °C. 2. For Section 4.4, The SAR measurement system was validated according to procedures in FCC KDB 865664 D0. The validation status in tabulated summary is as below. 3. For Section 4.5, Comparing to the reference SAR value provided by SPEAG in dipole calibration certificate, the deviation of system check results is within its specification of 10 %. The result indicates the system check can meet the variation criterion and the plots please refer to Appendix A of this report. Report No.: SFCICG-WTW-P25010386 Plot No. Frequency (MHz) LiquidTemp. (°C) Conductivity (σ) Permittivity (εr) Targeted Conductivity (σ) Targeted Permittivity (εr) Deviation Conductivity (σ) Deviation Permittivity (εr) Sensitivity Range Probe Linearity Probe Isotropy Modulation Type Duty Factor PAR Date Frequency (MHz) Targeted 1g SAR (W/kg) Measured 1g SAR (W/kg) Normalized 1g SAR (W/kg) Deviation (%) Dipole S/N Probe S/N DAE S/N Output Power (dBm) S01 2450 21.7 1.81 39.4 1.8 39.2 0.56 0.51 Pass Pass Pass OFDM N/A Pass Mar. 19, 2025 2450 52.90 2.44 48.68 -7.97 737 7555 1698 17 S02 2450 21.7 1.81 39.4 1.8 39.2 0.56 0.51 Pass Pass Pass OFDM N/A Pass Mar. 19, 2025 2450 52.90 2.44 48.68 -7.97 737 7555 1698 17 Tissue Verification Validation for CW Validation for Modulation System Check Not…

Text truncated - open the document above for the full version.

ChiconyBT Antenna 【GCR 2407(Hyper X)】Project Date 2024/12/09 Author Nick Cirocomm Technology Corp. www.cirocomm.com.twNo.5, Industrial 2nd Road., PingZhenDist., Taoyuan City 324, Taiwan(R.O.C) 1 DCAH0S13 Antenna Environment 2 With Magnetic Metal Part Antenna Position & Type 3 Antenna type : Chip antenna, datasheet as below Antenna position : DCAH0S13 Antenna S11 (WithMagnetic Metal Part) 4 2400MHz2440MHz2480MHz S11 (dB) -10.46-17.46-11.40 VSWR 1.851.301.73 DCAH0S13 Antenna Efficiency 5 Frequency (MHz)240024402480 Efficiency (%) 45.765045.22 0 10 20 30 40 50 60 Efficiency (%) Frequency (MHz) DCAH0S13 Antenna Average Gain 6 Frequency (MHz)240024402480 Efficiency (dB) -3.39-3.01-3.44 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 Efficiency (dB) Frequency (MHz) DCAH0S13 Antenna Peak Gain 7 Frequency (MHz)240024402480 Gain (dBi) -0.530.05-0.82 -6 -5 -4 -3 -2 -1 0 1 Gain ( dBi ) Frequency (MHz) DCAH0S13 Antenna 3D Pattern 8 2400MHz2440MHz2480MHz X Y Z DCAH0S13 Antenna 2D Pattern 9 XY-Plane XZ-Plane YZ-Plane X Y Z -Y +X +X+Y +Z +Z -Z-X +Y DCAH0S13 Matching Circuit 2.4pF 1.6nH Summary 11 1.Adjust the antenna tuning based on the customer’s provided prototype. 2.Modify the antenna matching to 2.4pF (behind the antenna) and add a series 1.6nH, and replace the cable material. The DCAH0S13 antenna efficiency is approximately 45%~50%. 3.The metal above the antenna causes partial field obstruction, resulting in lower efficiency. 4.Other characteristics are as shown in the previous report for the customer's reference. With Magnetic Metal Part 1.Name and address of the antenna manufacturer CIROCOMM TECHNOLOGY CORPORATION No. 37, GongyeS. Rd., GuantianDist., Tainan City 720006, Taiwan (R.O.C.) 2.Model number of the antenna DCAH0S13 3. Maximum gain of the antenna for the frequency band of operation  4.Antenna patterns(2D or 3D) preferred  12 5. Antenna gain description As per the test report 6. Performance specifications As per the test report 7. Table of calibrated equipment  8. Tetsdata 2024/12/09 9. Names of test personnel Nick 10. Names of commercial test software being used ETS-Quest Analysis 13 14 11.Test setup photos and  12. Description of how measurements are made Place the prototype on the test platform, position the test object at the center, and align it with the horn antenna. Use the ETS-Quest Analysis software to perform the measurements, and the computer will automatically calculate the results 13. Full electrical and mechanical specifications Test Volume :60 cm diameter Quiet Zone PerformanceAmplitude: taper less than 1dB, ripple maximum +/-0.5 dB Quiet Zone PerformancePhase: taper less than 5 degrees, ripple maximum +/-5.0 degrees Overall Dimensions (Nominal LxWxH):15 ftx 9 ftx 8 ft(4.6 m x 2.7 m x 2.4 m) Shielded Door Dimensions (Nominal):4 ftx 7 ft(1.2 m x 2.1 m) Max DUT Weight:50 kg (110 lbs.) Passive antenna measurements from 600MHz to 8500MHz 15 14. Configuration and RF Chains as applicable 

Report No.: RFCICG-WTW-P25010386 Page No. 1 / 44 Report Format Version: 7.2.0 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFCICG-WTW-P25010386 FCC ID: B94-HXGC241 Product: Wireless Gaming Controller Brand: HYPERX Model No.: HXGC241 Received Date: 2025/1/17 Test Date: 2025/1/23 ~ 2025/10/1 Issued Date: 2025/11/4 Applicant: HP Inc. Address: 3390 East Harmony Road, Fort Collins, Colorado United States 80528 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 Approved by: , Date: 2025/11/4 Jeremy Lin / Project Engineer This test report consists of 44 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Lena Wang / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFCICG-WTW-P25010386 Page No. 2 / 44 Report Format Version: 7.2.0 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 7 3.3 Channel List .............................................................................................................................................................. 8 3.4 Test Mode Applicability and Tested Channel Detail .................................................................................................. 9 3.5 Duty Cycle of Test Signal ........................................................................................................................................ 10 3.6 Test Program Used and Operation Descriptions .................................................................................................... 11 3.7 Connection Diagram of EUT and Peripheral Devices ............................................................................................ 11 3.8 Configuration of Peripheral Devices and Cable Connections ................................................................................ 11 4 Test Instruments ...................................................................................................................................................... 12 4.1 RF Output Power .................................................................................................................................................... 12 4.2 Power Spectral Density .......................................................................................................................................... 12 4.3 6 dB Bandwidth ...................................................................................................................................................... 12 4…

Text truncated - open the document above for the full version.

Report No.: RFCICG-WTW-P25010386-1 Page No. 1 / 44 Report Format Version: 7.2.0 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFCICG-WTW-P25010386-1 FCC ID: B94-HXGC241 Product: Wireless Gaming Controller Brand: HYPERX Model No.: HXGC241 Received Date: 2025/1/17 Test Date: 2025/1/23 ~ 2025/10/1 Issued Date: 2025/11/4 Applicant: HP Inc. Address: 3390 East Harmony Road, Fort Collins, Colorado United States 80528 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 Approved by: , Date: 2025/11/4 Jeremy Lin / Project Engineer This test report consists of 44 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Lena Wang / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFCICG-WTW-P25010386-1 Page No. 2 / 44 Report Format Version: 7.2.0 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 7 3.3 Channel List .............................................................................................................................................................. 8 3.4 Test Mode Applicability and Tested Channel Detail .............................................…

Text truncated - open the document above for the full version.