B94-HXMS233Wireless Mouse

Certification Designating Applicant as FCC US Agent To: Federal Communications Commission Date: 2024-08-08 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: B94-HXMS233 HP Inc. (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledge the applicant’s consent and the designated agent for service of process’s obligation to accept service of process. The applicant acknowledge the applicant’s acceptance to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledge the responsibility to inform the FCC whenever the agent information changes. Designated U.S. Agent from Applicant Company Company Name: HP Inc. Contact Person: Richard Tarsio Address: 3390 East Harmony Road, Fort Collins, Colorado, 80528 United States Tel.: 970-898-8713 Email: [email protected] FCC FRN: 0025126541 Sincerely yours, Signature Printed Name: Vanessa Tsai Title: Product Compliance Engineer

Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2024-08-08 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: B94-HXMS233 [HP Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Vanessa Tsai Title: Product Compliance Engineer Address: 3390 East Harmony Road, Fort Collins, Colorado, 80528 United States Tel.: 970-898-8713 Email: [email protected]

Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2024-08-08 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: B94-HXMS233 [HP Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Vanessa Tsai Title: Product Compliance Engineer Address: 3390 East Harmony Road, Fort Collins, Colorado, 80528 United States Tel.: 970-898-8713 Email: [email protected]

HP Inc. 3390 E Harmony Rd Fort Collins, CO 80528 USA Authorization on Behalf of HP Inc. for the US Federal Communications Commission Office of Engineering and Technology and Other FCC Programs and Offices 1. I, Richard P. Tarsio, am on the Worldwide Technical Regulations staff of HP Inc. (“HP”) and Applicant/Grantee Contact of Record for HP Inc. together with its subsidiaries and affiliates worldwide (collectively, “HP”) for HP’s dealings with the United States Federal Communications Commission (“FCC”). I am duly authorized by HP to make this Authorization on HP’s behalf. 2. This Authorization will designate the person named below to act on my behalf and HP’s behalf as an authorized agent and representative, until further notice, with the additional power to designate one or more third party agents for HP with regard to particular matters and applications. All acts carried out and requests made by this named representative relating to any matter before the FCC, including requests for confidentiality, shall have the same effect as mine. Name: Vanessa Tsai Title: Product Compliance Engineer Address: HP Inc. No. 1-5, Lixing 1 st Road, East District Hsinchu City, HSZ Taiwan Telephone: +886 932285270 E-mail: [email protected] 3. Questions about the scope and effect of this Authorization should be addressed as follows: Richard P. Tarsio US/Canada Technical Regulations & Standards Engineer Worldwide Technical Regulations HP Inc. (A) 3390 East Harmony Road, MS 66 Fort Collins, CO 80528 (T) +1 970 898 8713 (E) [email protected] 4. I declare under penalty of perjury that the foregoing is true and correct, and that this Authorization was executed at Fort Collins, Colorado on the date indicated below my signature. Richard P. Tarsio US/Canada Technical Regulations & Standards Engineer HP Inc. Date: 29 June 2021

TCB Authority to Act as Agent Number: MS-0045317 Revision: 0 Effective date: Oct 8, 2021 Page 1 of 1 Authority to Act as Agent Date: 2024-05-23 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint TUV Rheinland of North American Inc., 1279 Quarry Lane, Suite A, Pleasanton, CA 94566, USA to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with ____HP Inc. / 3390 East Harmony Road, Fort Collins, Colorado, 80528 United States_________. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: __2024-05-23__ Agreement is valid for 12 months from the above date. By: __________________________ Vanessa Tsai__ _________ (Signature) (Print name) Product Compliance Engineer___ (208) 333-5722_ __ (Title) (Telephone) On behalf of: HP Inc. __ (Company Name)

TCB FCC Request for Confidentiality Letter Number: MS-0044715 Revision: 1 Effective date: Sep 12, 2022 Author: William Graff Owner: William Graff MS-0044715 Page 1 of 1 Revision 1 Date: 2024-08-08 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: B94-HXMS233 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent User’s Manual*** Short Term Permanent Part List HP Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: Vanessa Tsai / Product Compliance Engineer (Signature) (Print name/Title) Tel: (208) 333-5722 Email: [email protected]

Wireless Mouse 無線滑鼠/无线鼠标 Made in China/ 中國製造/中国制造 R3A304 RoHS R-R-hpi-HXMS233 HyperX Pulsefire Haste 2 S Wir eless Gaming Mouse Regulatory Model/型號/型号HXMS233 IC: 466C-HXMS233 电流: 5V 500mA Rating/額定電壓電流/额定电压 FCC ID: B94-HXMS233 XXX-XXXXXX XXXXXXXXXXXXXX HP Inc. HP REG 23010, 08028 Barcelona, Spain HP Inc UK Ltd, Regulatory Enquiries, Earley Wes t, 300 Thames Valley Park Drive, Reading, RG6 1PT CAN ICES-3(B)/NMB-3(B) [email protected] HWC-MDEV-XXX.XXX CMIIT ID: XXXXXXXXXX Wireless Mouse 無線滑鼠/无线鼠标 Made in China/ 中國製造/中国制造 R3A304 RoHS R-R-hpi-HXMS233 HyperX Pulsefire Haste 2 S Wir eless Gaming Mouse Regulatory Model/型號/型号HXMS233 IC: 466C-HXMS233 电流: 5V 500mA Rating/額定電壓電流/额定电压 FCC ID: B94-HXMS233 XXX-XXXXXX XXXXXXXXXXXXXX X HP Inc. HP REG 23010, 08028 Barcelona, Spain HP Inc UK Ltd, Regulatory Enquiries, Earley Wes t, 300 Thames Valley Park Drive, Reading, RG6 1PT CAN ICES-3(B)/NMB-3(B) [email protected] HWC-MDEV-XXX.XXX CMIIT ID: XXXXXXXXXX Assembly PN: XXXXXX-XXX M/D: YYMM XXXXXXX Spare Part No.: XXXXXX-XXX S/N:XXXXXXXXXX Wireless Mouse 無線滑鼠/无线鼠标 Made in China/ 中國製造/中国制造 R3A304 RoHS R-R-hpi-HXMS233 HyperX Pulsefire Haste 2 S Wir eless Gaming Mouse Regulatory Model/型號/型号HXMS233 IC: 466C-HXMS233 电流: 5V 500mA Rating/額定電壓電流/额定电压 FCC ID: B94-HXMS233 XXX-XXXXXX XXXXXXXXXXXXXX HP Inc. HP REG 23010, 08028 Barcelona, Spain HP Inc UK Ltd, Regulatory Enquiries, Earley Wes t, 300 Thames Valley Park Drive, Reading, RG6 1PT CAN ICES-3(B)/NMB-3(B) [email protected] HWC-MDEV-XXX.XXX CMIIT ID: XXXXXXXXXX Wireless Mouse 無線滑鼠/无线鼠标 Made in China/ 中國製造/中国制造 R3A304 RoHS R-R-hpi-HXMS233 HyperX Pulsefire Haste 2 S Wir eless Gaming Mouse Regulatory Model/型號/型号HXMS233 IC: 466C-HXMS233 电流: 5V 500mA Rating/額定電壓電流/额定电压 FCC ID: B94-HXMS233 XXX-XXXXXX XXXXXXXXXXXXXX X HP Inc. HP REG 23010, 08028 Barcelona, Spain HP Inc UK Ltd, Regulatory Enquiries, Earley Wes t, 300 Thames Valley Park Drive, Reading, RG6 1PT CAN ICES-3(B)/NMB-3(B) [email protected] HWC-MDEV-XXX.XXX CMIIT ID: XXXXXXXXXX Assembly PN: XXXXXX-XXX M/D: YYMM XXXXXXX Spare Part No.: XXXXXX-XXX S/N:XXXXXXXXXX

Prüfbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN24GABM 001 Auftrags-Nr.: Order no.: 48248913 Seite 1 von 30 Page 1 of 30 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2024-07-15 Auftraggeber: Client: HP Inc. 3390 East Harmony Road, Fort Collins, CO 80528, USA Prü fgegenstand: Test item: Wireless Mouse Bezeichnung / Typ-Nr.: Identification / Type no.: HXMS233 Auftrags-Inhalt: Order content: Test Report for FCC SAR Prü fgrundlage: Test specification: FCC 47 CFR §2.1093 IEEE Std 1528-2013 IEC/IEEE 62209-1528:2020 Published RF exposure KDB procedures Wareneingangsdatum: Date of sample receipt: 2024-07-15 Prü fmuster-Nr.: Test sample no: A003769950-033 Prü fzeitraum: Testing period: 2024-05-23 Ort der Prü fung: Place of testing: EMC/RF Taipei Testing Site Prü flaboratorium: Testing laboratory: Taipei Testing Laboratories Prü fergebnis*: Test result*: Pass ü berprü ft von: compiled by: Ginger Chiang genehmigt von: authorized by: Morrison Huang Datum: Date: 2024-08-14 Ausstellungsdatum: Issue date: 2024-08-14 Stellung / Position: Project Engineer Stellung / Position: Project Engineer Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Mail: [email protected] ∙ Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN24GABM 001 Seite 2 von 30 Page 2 of 30 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜ V Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Ü berprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜ V Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Ru…

Text truncated - open the document above for the full version.

Test Laboratory: TUV Inc. Date: 2024/8/5 System Check_HSL2450MHz DUT: D2450V2 - SN804 Communication System: CW; Frequency: 2450 MHz; Duty Cycle: 1:1 Medium: HSL2450_240805 Medium parameters used: f = 2450 MHz; σ = 1.853 S/m; ε r = 40.181; ρ = 1000 kg/m 3 Ambient Temperature：23.5 °C; Liquid Temperature：22.6 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2024/4/22 Probe: EX3DV4 - SN7400; ConvF(7.67, 7.67, 7.67) @ 2450 MHz; Calibrated: 2024/4/25 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -9.0, 31.0 Phantom: Right_Twin-SAM V4.0 (20deg probe tilt); Type: QD 000 P40 CC; Serial: TP-1467 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Pin=250mW/Area Scan (9x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 21.8 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 108.8 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 28.7 W/kg SAR(1 g) = 13.9 W/kg; SAR(10 g) = 6.47 W/kg Maximum value of SAR (measured) = 23.1 W/kg 0 dB = 23.1 W/kg = 13.64 dBW/kg Appendix A - System Verification

Test Laboratory: TUV Inc. Date: 2024/8/5 08_BLE_2Mbps_Bottom Side_0mm_Ch39 DUT: HXMS233 Communication System: Bluetooth; Frequency: 2480 MHz; Duty Cycle: 1:1.329 Medium: HSL2450_240805 Medium parameters used: f = 2480 MHz; σ = 1.877 S/m; ε r = 40.08; ρ = 1000 kg/m 3 Ambient Temperature：23.5 °C; Liquid Temperature：22.6 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2024/4/22 Probe: EX3DV4 - SN7400; ConvF(7.67, 7.67, 7.67) @ 2480 MHz; Calibrated: 2024/4/25 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -19.0, 31.0 Phantom: Right_Twin-SAM V4.0 (20deg probe tilt); Type: QD 000 P40 CC; Serial: TP-1467 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Area Scan (10x14x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0709 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.031 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.0790 W/kg SAR(1 g) = 0.045 W/kg; SAR(10 g) = 0.028 W/kg Maximum value of SAR (measured) = 0.0655 W/kg 0 dB = 0.0655 W/kg = -11.84 dBW/kg Appendix B - SAR Measurement Test Laboratory: TUV Inc. Date: 2024/8/5 16_SRD2.4GHz_Bottom Side_0mm_Freq2478 DUT: HXMS233 Communication System: SRD; Frequency: 2478 MHz; Duty Cycle: 1:1.997 Medium: HSL2450_240805 Medium parameters used: f = 2478 MHz; σ = 1.875 S/m; ε r = 40.087; ρ = 1000 kg/m 3 Ambient Temperature：23.5 °C; Liquid Temperature：22.6 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2024/4/22 Probe: EX3DV4 - SN7400; ConvF(7.67, 7.67, 7.67) @ 2478 MHz; Calibrated: 2024/4/25 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -19.0, 31.0 Phantom: Right_Twin-SAM V4.0 (20deg probe tilt); Type: QD 000 P40 CC; Serial: TP-1467 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Area Scan (10x14x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0781 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.684 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 0.127 W/kg SAR(1 g) = 0.051 W/kg; SAR(10 g) = 0.020 W/kg Maximum value of SAR (measured) = 0.0964 W/kg 0 dB = 0.0964 W/kg = -10.16 dBW/kg

Appendix C - Calibration Certificate

Antenna Debugging Report customer：thermodynamic Project Name：Hakushu（OnboardPCB ANT） RF Engineer：Xu Long cell-phone number：15915343126 Report Version：2024.04.24 深圳市亿铭远科技有限公司 Shenzhen Yimingyuan Technology Co., Ltd Industry leading manufacturer of one-stop communication RF antenna solutions 行业领先的一站式通信射频天线解决方案制造商 One stop communication RF antenna solution manufacturer Antenna Manufacturer Company: Heatmoving Comapny Address: NO 28 Jingyuling Rd Dongcheng Dongguan Guangdong China catalogue Introduction to Project Debugging Summary of Report Version Project development environment Main antenna evaluation Active test data Environmental treatment methods Risk warning during debugging process summary Additional explanation Join hands and create a better future together Introduction to Project Debugging Plate type complete machine Antenna Overview Main antenna Frequency band Antenna status Antenna form Design Area Match changes 2G N/A samplePIFAnothing 3G 4GN/A 5GN/A Other antennas BT/WIFI2.4G Onboard nothing GPSN/Anothing diversityN/Anothing Prototype status HaKushu Environmental treatment nothing Introduction to Project Debugging Join hands and create a better future together Summary of Report Version editiondateContent Overview Hakushu20240424Onboard antenna test report Join hands and create a better future together Project development environment Antenna Smith Circle Diagram and S11 Parameters Antenna efficiency Gain&Efficiency&PhaseCenter 增益、效率和相位中心 frequency 频率(MHz) gain 增益(dBi) efficiency 效率(dB) efficiency 效率(%) 24023.9-3.7142.52 24103.85-3.4944.75 24164.34-3.1748.19 24224.57-3.1348.68 24284.49-3.4145.56 24344.43-3.4944.82 24404.29-3.4745.03 24464.18-3.5743.94 24544.35-3.6143.59 24604.48-3.6343.39 24664.08-3.9140.6 24723.91-3.9440.33 24803.85-3.9640.17 Join hands and create a better future together Z、X、Y Physical picture Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Antenna apple diagram and directional diagram Join hands and create a better future together Please carefully confirm whether the matching circuit mentioned in the report has been modified and whether the environmental treatment has been imported, as this will directly affect the antenna performance. Additional explanation The parameters provided in this report are only the parameters provided by the customer to our company for testing the prototype, and do not represent the final mass production status of your company's final project. If your company has the latest prototype for trial production or updated status (replacement of materials, software, environmental treatment, etc.), please submit it to our company for verification as soon as possible to confirm whether the antenna performance is affected. If your company needs to send the machine for third-party retesting or customer testing, please be sure to hand it over to our company for testing and confirmation, as factors such as motherboard consistency, assembly consistency, and differences in antenna assembly may lead to deviations in antenna parameters. The End 深圳市亿铭远科技有限公司 Shenzhen Yimingyuan Technology Co., Ltd 携手共进 共创未来 JOIN HANDS TO CREATE THE FUTURE 此报告中所含的一切信息版权归我司所有，在未得到我司许可下，请勿散播给任何第三方 All information contained in this report is copyrighted by our company. Please do not distribute it to any third party without our permission

Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN24T8SP 001 Auftrags-Nr.: Order no.: 48248913 Seite 1 von 29 Page 1 of 29 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2024-07-15 Auftraggeber: Client: HP Inc. 3390 East Harmony Road, Fort Collins, CO 80528, USA Prü fgegenstand: Test item: Wireless Mouse Bezeichnung / Typ-Nr.: Identification / Type no.: HXMS233 Auftrags-Inhalt: Order content: FCC Part 15C Test report (BLE) Prü fgrundlage: Test specification: FCC 47CFR Part 15: Subpart C Section 15.247 Wareneingangsdatum: Date of sample receipt: 2024-07-15 Prü fmuster-Nr.: Test sample no: A003769950-029 A003769950-035 Prü fzeitraum: Testing period: 2024-07-26 - 2024-08-06 Ort der Prü fung: Place of testing: EMC/RF Taipei Testing Site Prü flaboratorium: Testing laboratory: Taipei Testing Laboratories Prü fergebnis*: Test result*: Pass zusammengestellt von: compiled by: Anderson Chiu genehmigt von: authorized by: Ryan Chen Datum: Date: 2024-08-13 Ausstellungsdatum: Issue date: 2024-08-13 Stellung / Position: Senior Project Manager Stellung / Position: Senior Project Manager Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Mail: [email protected] ∙ Web: www.tuv.com V101023GCNSR Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN24T8SP 001 Seite 2 von 29 Page 2 of 29 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜ V Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Ü berprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜ V Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Inform…

Text truncated - open the document above for the full version.