B94-HXWD243USB Wireless Dongle

Date: 2025-11-12 FCC ID: B94-HXWD243 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing HP Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing HP Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------- Vanessa Tsai, Product Compliance Engineer HP Inc. Tel: +886 932285270 E-mail: [email protected]

U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: HP Inc. FRN: 0025126541 Grantee Code or FCC ID: B94 Contact Name: Vanessa Tsai Street Address: 3390 East Harmony Road, City/Province/Zip: Fort Collins, Colorado United States 80528 Telephone No: +886 932285270 Email: [email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Date: 2024-10-28 Signed by (printed name): Vanessa Tsai

Date: 2025-11-12 FCC ID: B94-HXWD243 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------------------- Vanessa Tsai, Product Compliance Engineer HP Inc. Tel: +886 932285270 E-mail: [email protected]

Date: 2025-11-12 FCC ID: B94-HXWD243 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 2026/4/30 the Grant Date of Equipment Authorization) in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Vanessa Tsai, Product Compliance Engineer HP Inc. Tel: +886 932285270 E-mail: [email protected]

Date: 2025-11-12 FCC ID: B94-HXWD243 AUTHORIZATION LETTER To Whom It May Concern: HP Inc. hereby authorizes Emerald Chen / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Emerald Chen / Specialist of BV CPS Taoyuan on HP Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Vanessa Tsai, Product Compliance Engineer HP Inc. Tel: +886 932285270 E-mail: [email protected]

SAR Test Report Report Format Version 8.0.0 Page No. : 1 of 26 Report No. : SFCICG-WTW-P25010387 Issued Date : Jul. 29, 2025 SAR Test Report FCC Rule Part : CFR §2.1093 Standards : IEEE Std 1528:2013, KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 447498 D04 Interim General RF Exposure Guidance v01, KDB 447498 D02 v02r01 Report No. : SFCICG-WTW-P25010387 Applicant : HP Inc. Address : 3390 East Harmony Road, Fort Collins, Colorado United States 80528 Product : USB Wireless Dongle FCC ID : B94-HXWD243 Brand : HYPERX Model No. : HXWD243 Sample Received Date : Jan. 21, 2025 Date of Testing : Feb. 12, 2025 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan FCC Accredited No. : TW0003 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Gordon Lin / Manager This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. SAR Test Report Report Format Version 8.0.0 Page No. : 2 of 26 Report No. : SFCICG-WTW-P25010387 Issued Date : Jul. 29, 2025 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Test Reference Guidance ...................................................................................................................................................... 4 2. Summary of Maximum SAR Value ....................................................................................................................................... 5 3. Description of Equipment Under Test ................................................................................................................................. 6 4. SAR Measurement System ................................................................................................................................................... 7 4.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 7 4.2 SPEAG DASY6 System ............................................................................................................................................... 7 4.2.1 Robot ............................................................................................................................................................... 8 4.2.2 Probes ............................................................................................................................................................. 9 4.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 9 4.2.4 Phantoms ......................................................................................................................................................... 9 4.2.5 Device Holder ................................................................................................................................................ 10 4.2.6 System Validation Dipoles ............................................................................................................................. 11 4.2.7 Power Source ................................................................................................................................................ 11 4.2.8 Tissue Simulating Liquids .............................................................................................................................. 12 4.3 SAR System Verification ...............................................................................................................................…

Text truncated - open the document above for the full version.

Plots of System Verification Appendix A. Plots of System Verification The plots for system verification are shown as follows. Report No.: SFCICG-WTW-P25010387 Plots of System Verification Measurement Report S01 System Check_H2450_250212 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type D2450V2, 10.0 x 10.0 x 290.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , 2450.000 6.66 1.80 39.2 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H19T27N9 , 2025-02-12 EX3DV4 - SN7537, 2024-11-20 DAE4 Sn1431, 2024-07-16 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 48.0 x 96.0 35.0 x 35.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2025-02-12 2025-02-12 psSAR1g [W/kg] 2.59 2.55 psSAR10g [W/kg] 1.27 1.25 Power Drift [dB] -0.05 0.11 Report No.: SFCICG-WTW-P25010387 Plots of Measurement Appendix B. Plots of Measurement The SAR plots for highest measured SAR in each exposure configuration, wireless mode and frequency band combination are shown as follows. Report No.: SFCICG-WTW-P25010387 Plots of Measurement Measurement Report P01 SRD_SRD HID_Horizontal Up_5mm_CH1_Ant 0 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type P25010387, 35.0 x 20.0 x 17.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Horizontal Up, 5.00 ISM 2.4 GHz Band Bluetooth, 10032-CAA 2404.000, 1 6.66 1.77 39.2 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H19T27N9 , 2025-02-12 EX3DV4 - SN7537, 2024-11-20 DAE4 Sn1431, 2024-07-16 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 72.0 x 96.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2025-02-12 2025-02-12 psSAR1g [W/kg] 0.021 0.022 psSAR10g [W/kg] 0.011 0.011 Power Drift [dB] 0.17 -0.08 M2/M1 [%] 56.8 Dist 3dB Peak [mm] 10.8 Report No.: SFCICG-WTW-P25010387 Appendix Z. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows. Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387 Report No.: SFCICG-WTW-P25010387

CirocommTechnologyCorp. www.cirocomm.com.tw 1 No.5,Industrial2ndRoad.,PingZhenDist.,TaoyuanCity324,Taiwan(R.O.C) ChiconyBT Antenna 【GCR 2407(Hyper X)dongle】Project Date 2024/12/02 Author Nick Environment 2 Antenna Position & Type 2 Antenna position : Antenna type : PCB antenna AntennaS11 3 2400MHz2440MHz2480MHz S11(dB) -12.71-10.09-8.27 VSWR 1.61.912.25 AntennaEfficiency Frequency(MHz)240024402480 Efficiency(%) 66.8664.5960.57 80 70 60 50 40 30 20 10 0 Efficiency (%) 5 Frequency(MHz) AntennaAverageGain Frequency(MHz)240024402480 Efficiency(dB) -1.74-1.89-2.17 0 -0.5 -1 -1.5 -2 -2.5 -3 -3.5 -4 Efficiency (dB) 6 Frequency(MHz) AntennaPeakGain Frequency(MHz)240024402480 Gain(dBi) 1.091.330.99 -1 -0.5 0 0.5 1 1.5 Gain (dBi) 7 Frequency(MHz) Antenna3DPattern X Y Z 2400MHz2440MHz2480MHz 8 Antenna2DPattern X Y Z YZ-Plane XY-Plane XZ-Plane 9 Summary 10 1.Adjust the antenna tuning based on the customer's provided prototype. 2.The antenna efficiency is approximately 60%~66%. 3.Other characteristics are as shown in the previous report for the customer's reference. 1.Antenna gain description As per the test report 2. Performance specifications As per the test report 3.Table of calibrated equipment  4.Tets data 2024/12/02 5. Names of test personnel Nick 6.Names of commercial test software being used ETS-Quest Analysis 11 12 7.Test setup photos and  8.Description of how measurements are made Place the prototype on the test platform, position the test object at the center, and align it with the horn antenna. Use the ETS-Quest Analysis software to perform the measurements, and the computer will automatically calculate the results 9.Full electrical and mechanical specifications estVolume :60 cm diameter Quiet Zone PerformanceAmplitude: taper less than 1dB, ripple maximum +/- 0.5 dB Quiet Zone PerformancePhase: taper less than 5 degrees, ripple maximum +/- 5.0 degrees Overall Dimensions (Nominal LxWxH):15 ftx 9 ftx 8 ft(4.6 m x 2.7 m x 2.4 m) Shielded Door Dimensions (Nominal):4 ftx 7 ft(1.2 m x 2.1 m) Max DUT Weight:50 kg (110 lbs.) Passive antenna measurements from 600MHz to 8500MHz 13 10. Configuration and RF Chains as applicable 

Report No.: RFCICG-WTW-P25010387 Page No. 1 / 43 Report Format Version: 7.2.0 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFCICG-WTW-P25010387 FCC ID: B94-HXWD243 Product: USB Wireless Dongle Brand: HYPERX Model No.: HXWD243 Received Date: 2025/1/21 Test Date: 2025/1/24 ~ 2025/10/1 Issued Date: 2025/11/4 Applicant: HP Inc. Address: 3390 East Harmony Road, Fort Collins, Colorado United States 80528 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 Approved by: , Date: 2025/11/4 Jeremy Lin / Project Engineer This test report consists of 43 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Vera Huang / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFCICG-WTW-P25010387 Page No. 2 / 43 Report Format Version: 7.2.0 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 7 3.3 Channel List .............................................................................................................................................................. 8 3.4 Test Mode Applicability and Tested Channel Detail .................................................................................................. 8 3.5 Duty Cycle of Test Signal.......................................................................................................................................... 9 3.6 Test Program Used and Operation Descriptions .................................................................................................... 10 3.7 Connection Diagram of EUT and Peripheral Devices ............................................................................................ 10 3.8 Configuration of Peripheral Devices and Cable Connections ................................................................................ 10 4 Test Instruments ...................................................................................................................................................... 11 4.1 RF Output Power .................................................................................................................................................... 11 4.2 Power Spectral Density .......................................................................................................................................... 11 4.3 6 dB Bandwidth ...................................................................................................................................................... 11 4.4 Con…

Text truncated - open the document above for the full version.