B94HHB19CVoice Tablet

Product Notices 2 Regulatory notices Federal Communications Commission notice The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Declaration of Conformity for products marked with the FCC logo (United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: 1.This device may not cause harmful interference. 2.This device must accept any interference received, including interference that may cause undesired operation. For further information, contact: Manager of Corporate Product Regulations Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304 (650) 857-1501 To identify your product, refer to the part, series, or model number located on the product. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. Australia and New Zealand notices This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 1 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. Avisos para o Brasil Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. Este equipamento atende aos limites de Taxa de Absorção Específica referente à exposição a campos elétricos, magnéticos e eletromagnéticos de radiofreqüências adotados pela ANATEL. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should be minimized. This device has been tested and demonstrated compliance when Bluetooth and WiFi are transmitting simultaneously. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. 3 Avis pour le Canada Ce d ispositif numérique de Classe B répond aux exigences de la réglementation du Canada relative aux équipements causant des interférences CAN ICES-3(B)/NMB-3(B). Si ce d ispositif est doté de fonctionnalités de réseau sans fil ou Bluetooth, il est conforme aux normes d’exemption de licence RSS d’Industrie Canada. Son fonctionnement est assujetti aux deux cond itions suivantes : 1) Ce d ispositif ne doit causer aucune interférence dangereuse, et 2) ce …

Text truncated - open the document above for the full version.

More HP resources ResourceContents HP support• Online chat with an HP technician. • Email support. • Find telephone numbers. • Locate HP service center locations. • Access User Guide. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Serial number, product number, model number, and IMEI number • Label under the removable battery Limited Warranty The warranty is located in the document folder of the voice tablet box. • Warranty information about this voice tablet. WARNING: To reduce the risk of electric shock or damage to the equipment, plug the AC adapter into an AC outlet that is easily accessible at all times. WARNING: To reduce potential safety issues, only the AC adapter provided with the product, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the product. WARNING: To reduce the possibility of heat-related injuries or of overheating the voice tablet, do not place the voice tablet directly on your lap. Do not allow a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The voice tablet and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). WARNING! Keep the battery away from children. WARNING! To reduce potential safety issues, only the battery provided with the voice tablet, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the voice tablet. WARNING: To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. Replace this box with PI statement as per spec. Replace this box with PI statement as per spec. Replace this box with PI statement as per spec. Replace this box with PI statement as per spec. Replace this box with PI statement as per spec. Replace this box with PI statement as per spec. 755325-001 © Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical and editorial errors or omissions contained herein. First Edition: November 2013 Specification The voice tablet operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100—240 V, 50/60 Hz, 0.3-1.0 A. Note: The voice tablet can operate on DC power using an industry-standard micro-A or micro-B USB cable. The HP adapter included with your voice tablet is recommended for charging the voice tablet. Temperature Operating: Metric, 0°C to 40°C; U.S., 32°F to 104°F Relative humidity (noncondensing) Operating: 10% to 90% Product description This product is a lightweight tablet and features a thin-panel display, processor, RAM, integrated battery pack, and an external AC adapter. The printed Quick Start guide identifies the hardware components of your tablet. The AC adapter has a rating of 100-240 V ac, 50/60 Hz, 0.3-1.0 A, To access the latest user guide, go to http://www. hp.com/support, and select your country. Select Drivers & Downloads, and then follow the on- screen instructions. Regulatory information For regulatory identification purposes, your product is assigned a Regulatory Model Number, HSTNH-B19C. The RMN is located on the regulatory label under the removable battery. This regulatory number should not be confused with the marketing name (if any, etc.) or product numbers (HP P/N, etc.). The Product Notices document provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the product. Some notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wire- less devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Regulatory markings for your country or region may be located on a label under the removable battery or may be located in the Product Notices document. WCDMA 数字移动电话机 Quick Start Note: Features may vary by model and country. Display apps, widgets, and notification Apps—Touch , and then touch the Apps tab to see a list of all apps. Widgets—Touch , and then touch the Widgets tab to see a list of all widgets. Notification—Swipe down from the top of the screen to see your notifications. Back up your data HP strongly encourages that you periodically back up your personal data and media on your voice tablet to another computer, a dedicated storage device, or to the cloud using one of several commercially available solutions. For more information, see the User Guide on the HP Web site. Change your voice tablet’s view The Auto-rotate feature allows you to change your voice tablet’s view. For landscape view, hold the voice tablet horizontally. For portrait view, hold the voice tablet vertically. NOTE: Some apps do not rotate automatically. To change the Auto-rotate setting, touch Settings, touch Display, and then touch Auto-rotate screen to lock or unlock the screen rotation. Insert a micro SD card 1 2 3 4 Setting up your voice tablet 1 If a SIM card is not preinstalled in the voice tablet, insert a SIM card (purchased separately) in the appropriate slot. 2 1 2 3 4 2G 3G/2G 3 After charging the battery, press and hold the power button for about 2 seconds until the HP logo is displayed. 4 Follow the on-screen instruct…

Text truncated - open the document above for the full version.

Hewlett-Packard Company 1501 Page Mill Road Mail Stop 510101 Palo Alto, CA 94304 www.hp.com Walter Overcash Product Regulatory Engineer 281.514.2756 Tel [email protected] April 10, 2014 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Dear Sirs: HSTNH-B19C has a WLAN/Bluetooth combination antenna with FCC ID: B94HHB19C. This WLAN/Bluetooth co-existence mechanism is to ensure that the WLAN and Bluetooth transmitters cannot simultaneously operate. Therefore, the WLAN and Bluetooth antenna in HSTNH-B19C should not be considered to be able to transmit simultaneously. Users can use WLAN and Bluetooth simultaneously, but WLAN and Bluetooth are used by time sharing and with no overlapping transmission. If you have any comments or questions, please feel free to contact me. Sincerely, Walter Overcash

Authorizationon Behalf of Hewlett-Packard Company For the US Federal Communications Commission Office of Engineering and TechnologyandOther FCC Programs and Offices 1. I, David P. Adams, am Canada/USA Technical Regulations Manager for Hewlett- Packard Company (“Hewlett-Packard”) and Applicant/Grantee Contact of Recordfor Hewlett- Packard together with its subsidiaries and affiliates worldwide (collectively, “HP”) for HP’s dealings withthe United States Federal Communications Commission (“”FCC”). I am duly authorized by HP to make this Authorization on HP’s behalf. 2. This Authorization will designate the person named below to act on my behalf and HP’s behalf as authorized agent and representative, until further notice, with the additional power to designate one or more third partyagents for HP withregard to particular matters and applications. All acts carried out and requests made by this named representativerelating to any matter before the FCC, including requests for confidentiality,shallhave the same effect as mine. Name:Walter Overcash Title:RegulatoryEngineer Address:Hewlett-Packard Company Mailstop 050807 11445 Compaq Center Drive W Houston, TX 77070 Telephone:281-514-2756 E-mail:[email protected] 3. Questionsabout the scope and effect ofthis Authorization should be addressed as follows: David P. Adams Canada/USA Region Technical Regulations Manager 1501 Page Mill Road, MS1229 Palo Alto, CA 94304-1126 650.857.4423 Telephone 650.857.4882 Fax [email protected] 4. I declare under penalty of perjury that the foregoing is true and correct, and that this Authorization was executed atPalo Alto, California, on the date indicated below my signature. ____________________________ Signature David P. Adams Canada/USA Technical Regulations Manager Hewlett-Packard Company _March 5, 2008______________ Date

Hewlett-Packard Company 1501 Page Mill Road Mail Stop 510101 Palo Alto, CA 94304 www.hp.com Walter Overcash Product Regulatory Engineer 281.514.2756 Tel [email protected] April 10, 2014 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 FCC ID: B94HHB19C Dear Sirs: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47CFR§§0.457, 0.459), we request the Commission to withhold the following attachments as confidential documents from public disclosure indefinitely: • Schematic Diagram • Block Diagram • Parts List • Tune-up Procedure • Operational Description The above mentioned documents contain detailed system and equipment descriptions and thus are considered proprietary information in the operation of the equipment. The public disclosure of the above documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We request the Commission to grant short-term confidentiality on the following attachments until 180 days after the Grant Date of Equipment Authorizations: • External Photos • Internal Photos • Test Setup Photos • User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Hewlett-Packard Company 1501 Page Mill Road Mail Stop 510101 Palo Alto, CA 94304 www.hp.com April 10, 2014 Page 2 If you have any comments or questions, please feel free to contact me. Sincerely, Walter Overcash

Hewlett-Packard Company 1501 Page Mill Road Mail Stop 510101 Palo Alto, CA 94304 www.hp.com Walter Overcash Product Regulatory Engineer 281.514.2756 Tel [email protected] April 10, 2014 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Dear Sirs: We confirm that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. If you have any comments or questions, please feel free to contact me. Sincerely, Walter Overcash

Hewlett-Packard Company 1501 Page Mill Road Mail Stop 510101 Palo Alto, CA 94304 www.hp.com Walter Overcash Product Regulatory Engineer 281.514.2756 Tel [email protected] April 10, 2014 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Dear Sirs: We confirm that there is no other space for putting the label on our device, FCC ID: B94HHB19C, except for the space of the battery compartment of this device. The label will be put in the battery compartment and it is visible to the users as they purchase the product and install the battery. If you have any comments or questions, please feel free to contact me. Sincerely, Walter Overcash

Hewlett-Packard Company 1501 Page Mill Road Mail Stop 510101 Palo Alto, CA 94304 www.hp.com Walter Overcash Product Regulatory Engineer 281.514.2756 Tel [email protected] April 10, 2014 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Dear Sirs: Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan is authorized to open projects on Hewlett-Packard’s behalf for the purpose of radio assessment/certification under the following conditions: 1. This authorization is extended only to the Hewlett-Packard Regulatory Model HSTNH- B19C, FCC ID: B94HHB19C. 2. This authorization is extended only for the following certifications/testing: FCC. 3. All invoices for services rendered should be sent to Bureau Veritas Consumer Products Services (H.K.) Ltd., and not to Hewlett-Packard. Licenses and test reports generated on Hewlett-Packard’s behalf must be emailed or copied to my attention when completed. 4. No access should be granted to any existing Hewlett-Packard file or project information. 5. The certifications and test reports should note only Hewlett-Packard’s name and Regulatory Model. No other company or product identification should be noted on the certificates or test reports except as needed by the regulator. 6. The FCC certification must be applied for using the Short-Term Confidentiality program as described in FCC DA 04-1705. As defined in 47 CFR Ch. 1.2002 (b), we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). If you have any comments or questions, please feel free to contact me. Sincerely, Walter Overcash

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version 1 Reference No.: 140314N018 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version 1 Reference No.: 140314N018 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version 1 Reference No.: 140314N018 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version 1 Reference No.: 140314N018

FCC ID: B94HHB19C Mobile Phone (Back) Battery Compartment Label Location

Self Declaration - Conforming to IS 13252 (Part 1) : 2010, R-41001872 European Regulatory Address: HP, HQ-TRE, 71004 Boeblingen, Germany Type Approved No.: ESD-GEC-1402255 SCT RCPHPHS13-XXXX ANATEL: 0000-00-0000 CNC: XXXXXXXXXX CLASS B NTC ID: B38013-14 HP Slate 6 VoiceTab RMN(型号): HSTNH-B19C Input: 5.3V 2A 额定输入: 5.3V 2A WCDMA数字移动电话机 CMIIT ID: 2014CJ0454 Made in China 中国制造 FCC ID: B94HHB19C *72.57±0.10 *86.57±0.10 17.09 13.35 2.86 3.88 0.86 6.4 5 5 5 8.0 8.0 4.4 7 European: WG601HM Label Plan S/N: 6CY3470001 P/N: XXXXXXX IMEI 1: 123456789012301 IMEI 2: 123456789012302 S/N Label (40*20mm) PNOP Label (30*15mm) REPLACE WITH HP SPARE 7XXXX1-001 7XXXX2-001 Service Orderable PN FU13B0 <Whole Unit> Printing Color: according to artwork. SIRIM Label (15*10mm) for Malaysia only. China TA Label (30*12mm) for China only. Philippine: Pakistan: China: ANATAL Label (34*12mm) for Brazil only.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 6 Report Version 1 Reference No.: 140314N018 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 6 Report Version 1 Reference No.: 140314N018 BT/WIFI ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 6 Report Version 1 Reference No.: 140314N018 GSM/WCDMA ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 6 Report Version 1 Reference No.: 140314N018 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 6 Report Version 1 Reference No.: 140314N018 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 6 of 6 Report Version 1 Reference No.: 140314N018

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 56 Report Version 1 Test Report No.: RF140314N018 TEST REPORT Applicant Hewlett-Packard Company Address 1501 Page Mill Road, M/S 1419, Palo Alto, CA 94304, USA Manufacturer or Supplier Huizhou BYD Electronic Co.,Ltd Address C4 and C6 Building, BYD Industrial Park, Xiangshui River, Economic Development Zone, Daya Bay, Huizhou, Guangdong, P R China Product Voice Tablet Brand Name HP Model HSTNH-B19C Additional Model & Model Difference N/A Date of tests Mar. 14, 2014 ~ Mar. 31, 2014 the tests have been carried out according to the requirements of the following standards: FCC Part 15, Subpart C (Section 15.247) CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Glyn He Project Engineer/ EMC Department Approved by Sam Tung Manager / EMC Department Date: Apr. 01 2014 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 56 Report Version 1 Test Report No.: RF140314N018 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 5 1 SUMMARY OF TEST RESULTS...................................................................................................... 6 2 MEASUREMENT UNCERTAINTY .................................................................................................. 6 3 GENERAL INFORMATION.............................................................................................................. 7 3.1 GENERAL DESCRIPTION OF EUT........................................................................................... 7 3.2 DESCRIPTION OF TEST MODES............................................................................................. 8 3.2.1. CONFIGURATION OF SYSTEM UNDER TEST ............................................................... 9 3.2.2. TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL.................................... 9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS...........................................................11 3.4 DESCRIPTION OF SUPPORT UNITS......................................................................................11 4 TEST TYPES AND RESULTS ....................................................................................................... 12 4.1. CONDUCTED EMISSION MEASUREMENT ........................................................................... 12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................................... 12 4.1.2 TEST INSTRUMENTS..................................................................................................... 12 4.1.3 TEST PROCEDURES ..................................................................................................... 13 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 13 4.1.5 TEST SETUP ................................................................................................................... 14 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 14 4.1.7 TEST RESULTS............................................................................................................... 15 4.2. RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................. 17 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ...................... 17 4.2.2 TEST INSTRUMENTS .................................................................................................... 18 4.2.3 TEST PROCEDURES..................................................................................................... 19 4.2.4 DEVIATION FROM TEST STANDARD........................................................................... 19 4.2.5 TEST SETUP .................................................................................................................. 20 4.2.6 EUT OPERATING CONDITIONS ................................................................................... 20 4.2.7 TEST RESULTS.............................................................................................................. 21 4.3. NUMBER OF HOPPING FREQUENCY USED........................................................................ 29 4.3.1. LIMIT…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected]…

Text truncated - open the document above for the full version.