B94HHI407GTablet

Color Side 1: BLACK + PMS 2925 Flat size: 12.75 x 5.5 in. Fold 1: 3-panel accordion fold Color Side 2: BLACK + PMS 2925 Finished size: 4.25 x 5.5 in. 6620 Cypresswood Drive Suite 120 Spring, TX 77379 832.717.4331 Start Here Quick Start More HP resources ResourceLocation HP support • Online chat with an HP technician. • Find telephone numbers. • Locate HP service center locations. Go to http://www.hp.com/support. Product Notices, Warranty, and User Guide • Safety and regulatory information • The expressly provided HP Limited Warranty applicable to your tablet • Product documentation To access the user guides, select the HP Support Assistant app on the Start screen, select My computer, and then select User guides. Serial number, product number, model numberOn the back of the tablet Product description This product is a lightweight tablet and features a thin-panel display, processor, RAM, integrated battery pack, and an external AC adapter. The printed Quick Start guide identifi es the hardware components of your tablet. The AC adapter has a rating of 100-240 V ac, 50/60 Hz, 0.3-1.0 A. You can access the latest user guide from the HP Support Assistant app. Specifi cation The tablet operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50/60 Hz. Note: The tablet can operate on DC power using an industry-standard micro-B USB cable. The HP adapter included with your tablet is recommended for charging the tablet. Temperature Operating: Metric, 0°C to 40°C; U.S., 32°F to 104°F Relative humidity (noncondensing) Operating: 10% to 90% Regulatory information For regulatory identifi cation purposes, your product is assigned a Regulatory Model Number (RMN), HSTNH-I407G. The RMN is located on the back of the tablet, and should not be confused with the marketing name (if any, etc.) or product numbers (HP P/N, etc.). If required, regulatory markings for your country or region are located on the back of the unit, un- der the removable battery (if equipped), on the packaging, or elsewhere in this document. For more safety and regulatory information, refer to the Product Notices included with your tablet, accessible via the HP Support Assistant app. Product notices Some notices may not apply to your product. One or more integrated wireless devices are installed in this device. In some environments, the use of wireless devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Quick Start Setting up your tablet WARNING: To reduce the risk of electric shock or damage to the equipment, plug the AC adapter into an AC outlet that is easily accessible at all times. WARNING: To reduce potential safety issues, only the AC adapter provided with the product, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the product. WARNING: To reduce the possibility of heat-related injuries or of overheating the tablet, do not place the tablet directly on your lap. Do not allow a soft surface, such as pillows or rugs or clothing, to block airfl ow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The tablet and the AC adapter comply with the user-accessible surface temperature limits defi ned by the International Standard for Safety of Information Technology Equipment (IEC 60950-1). WARNING: To reduce the risk of fi re or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fi re or water. WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods. IMPORTANT: The battery(ies) in this product cannot be easily replaced by users themselves. Removing or replacing the battery could aff ect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Limited Warranty You can fi nd the expressly provided HP Limited Warranty applicable to your product using the HP Support Assistant app. In some countries or regions, HP may provide a printed HP Limited Warranty in the box. For some countries or regions where the warranty is not provided in printed format, you may request a printed copy from http://www.hp.com/go/orderdocuments or write to: North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd. Boise, ID 83714, USA Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9 20063 Cernusco s/Naviglio (MI), Italy Asia Pacifi c: Hewlett-Packard, POD, P.O. Box 200 Alexandra Post Off ice, Singapore 911507 When you request a printed copy of your warranty, please include your product number, name, and postal address. IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to http://www.hp.com/ go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.     © Copyright 2014 Hewlett-Packard Development Company, L.P. SD Logo is a trademark of its proprietor. Microsoft and Windows are U.S. registered trademark of the Microsoft group of companies. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical and editorial errors or omissions contained herein. First Edition: September 2014 1 After charging the battery, press and hold the power button for about 2 seconds until the HP logo is displayed.…

Text truncated - open the document above for the full version.

1 Product Notices 2 إرات  ا 3 Pemberitahuan produk 4 Бележки за продукта 5 Obavještenja o proizvodu 6 Informace o produktu 7 Produktbemærkninger 8 Produkthinweise 9 Tootemärkused 10 Anuncios sobre productos 11 Σηειώσεις προϊόντος 12 Informations sur le produit 13 Obavijesti o proizvodima 14 Normative del prodotto 15 Өнім туралы ескертулер 16 Izstrādājuma paziņojumi 17 Įspėjimuose dėl produktų 18 Termékinformációkban 19 Productaankondigingen 20 Produktopplysninger 21 Informacje na temat produktów 22 Avisos do produto 23 Avisos sobre o produto 24 Notificări despre produs 25 Уведомления о продукте 26 Upozornenia o produkte 27 Obvestila o izdelku 28 Tuoteohjeista 29 Obaveštenja o proizvodu 30 Produktmeddelanden 31 ประกาศเกี ยวกับผลิตภัณฑ์ 32 Ürün Bildirimleri 33 Зауваження щодо виробу 34 製品 製品製品 製品 についての についてのについての についての注意事項 注意事項注意事項 注意事項 35 제품 제품제품 제품 고지사 고지사고지사 고지사 항 항항 항 36 产品通告 产品通告产品通告 产品通告 37 產品注意事項 產品注意事項產品注意事項 產品注意事項 38 'הודעות מוצר' 39 Regulatory notices 40 Federal Communications Commission notice The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. 41 Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. 42 Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. 43 Declaration of Conformity for products marked with the FCC logo (United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. For further information, contact: Manager of Corporate Product Regulations Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304 (650) 857-1501 To identify your product, refer to the part, series, or model number located on the product. 44 Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should be minimized. This device has been tested and demonstrated compliance when Bluetooth and WiFi are transmitting simultaneously. 45 Australia and New Zealand notices This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 1 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. 46 Avisos para o Brasil Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. Este equipamento atende aos limites de Taxa de Absorção Específica referente à exposição a campos elétricos, magnéticos e eletromagnéticos de radiofreqüências adotados pela ANATEL. 47 Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.. CAUTION: When usi…

Text truncated - open the document above for the full version.

May 11, 2012 Regulatory WLAN Antenna Information 1/23 GANGES_Regulatory WLAN Antenna Information Platform Platform Owner Hewlett-Packard Company Brand Name Hewlett-Packard Company Model Name GANGES ODM Target Launch Date 2014/08/25 Antenna Manufacturer HONGLIN TECHNOLOGY GROUP LIMITED . Part Number ■ WLAN Main Antenna: 6036B0142901 ■ Module With WLAN Module ■ (Check Box) May 11, 2012 Regulatory WLAN Antenna Information 2/23 Antenna Sample / Antenna Data Requirements for worldwide regulatory approval Section Description of Required OEM / ODM Antenna Information US / IC EU Japan Taiwan S.Korea 1A Part Number for Antenna only RequiredRequiredRequired Required Required 1B Antenna Manufacturer Name RequiredRequiredRequired Required Required 1C Description of Antenna Type RequiredN/A N/A N/A N/A 1D Part number of Antenna Assembly / cable impedance, length & diameter. RequiredDesiredDesiredDesired Desired 1E Tx1, Tx2 & Tx3 antenna (Peak Gain W/ cable loss) * RequiredRequiredRequired Required Required 1E OR 1F, 1G, 1H 1F Tx1, Tx2 & Tx3 antenna (Peak Gain only) * RequiredRequiredRequired Required Required 1G VSWR of cable including connector RequiredRequiredRequired Required Required 1H Tx1, Tx2 & Tx3 antenna (Cable loss W/ connector) * RequiredRequiredRequired Required Required 2 Dimensioned Photographs and Drawings of Tx1, Tx2, and Tx3 (or Rx3) antennas RequiredRequiredRequired Required Required 3 Radiation patterns of antennas loaded in the host platform. RequiredDesiredRequired Required Required 4 Platform model name / number - correlated to antenna manufacturer and antenna part number RequiredRequiredDesiredRequired Desired 5 Photograph(s) or Drawings showing location of antennas in platform. (S. Korea requires photographs of antennas for approval submission). Taiwan requires pictures of each antenna type shown in the system. RequiredRequiredDesired Required (Photos) Required (Photos) 6 Mech. drawings / photos with dimensions of antenna locations and distance from end-user (For evaluation of SAR testing requirement). RequiredN/A N/A N/A N/A 7 Photograph(s) or Drawings showing the location of all antennas (WLAN, other) and distance between those transmitting antennas. Information will be used to evaluate whether co-location testing is required. RequiredN/A N/A N/A N/A 8 Local representative contact information for LMA/ PARS process. RequiredN/A N/A N/A N/A May 11, 2012 Regulatory WLAN Antenna Information 3/23 Antenna Information Section 1. Antenna Assembly Specifications 1A 1B 1C 1D 1E 1F 1G 1H Antenna Part Number Manufacture Antenna Type Cable Assembly Part Number and Information Peak Gain W/ Cable loss (dBi) Peak Gain w/o Cable Loss (dBi) VSWR Cable Loss (dBi) PIFA 2400 - 2500 MHz 2400 - 2500 MHz 2400 - 2500 MHz 2400 - 2500 MHz -3.00 dBi (peak) -2.88 dBi (peak) 2.0 max 0.12 dBi (peak) Main Antenna 50 ohm Coaxial. 5150 - 5350 MHz 5150 - 5350 MHz 5150 - 5350 MHz 5150 - 5350 MHz length: 35 mm 0.52 dBi (peak) 0.70 dBi (peak) 2.0 max 0.18 dBi (peak) Antenna P/N : 6036B0142901 diameter:1.13mm5470 - 5725 MHz 5470 - 5725 MHz 5470 - 5725 MHz 5470 - 5725 MHz Connector: I-PEX MHF-4L 0.64 dBi (peak) 0.82 dBi (peak) 2.0 max 0.18 dBi (peak) 5725 - 5850 MHz 5725 - 5850 MHz 5725 - 5850 MHz 5725 - 5850 MHz 0.05 dBi (peak) 0.25 dBi (peak) 2.0 max 0.20 dBi (peak)  Antenna Peak Gain required being test in system basis.  1E frame contend absolutely peak antenna gain include H/V May 11, 2012 Regulatory WLAN Antenna Information 4/23 Antenna Peak Gain Table: Main antenna Frequency (MHz) Horizontal Vertical (dBi) (dBi) 2400 -5.81 -3.06 2450 -4.66 -3.05 2500 -3.20 -3.00 5150 -1.18 -6.65 5250 -0.33 -5.44 5350 0.52 -4.10 5470 0.64 -2.23 5600 0.11 -2.65 5725 -0.45 -3.04 5785 -0.37 -3.73 5850 0.05 -3.56 May 11, 2012 Regulatory WLAN Antenna Information 5/23 Section 2. Dimensioned Photos or Drawings of Antennas Include a dimensioned photo and dimensioned drawing of Tx1 antenna here. Tx1 Antenna Dimensioned Drawing: Tx1 Antenna Photo: May 11, 2012 Regulatory WLAN Antenna Information 6/23 Include front view photo of all antennas here (below is an example for 2 antennas). Antenna Manufacturer: HONGLIN TECHNOLOGY GROUP LIMITED Antenna Part Number: 6036B0142901 (Tx1), (Tx2 or or Rx2) Include back view photo of all antennas here (below is an example for 2 antennas). Antenna Manufacturer: HONGLIN TECHNOLOGY GROUP LIMITED Antenna Part Number: 6036B0142901 (Tx1), (Tx2 r or Rx2) May 11, 2012 Regulatory WLAN Antenna Information 7/23 Section 3. Radiation characteristics of antennae Loaded in Host Platform 2400-2500MHz radiation characteristic Tx1 antenna: 2400 MHz Center Frequency H-Pol V-Pol Peak Gain -5.81 -3.06 May 11, 2012 Regulatory WLAN Antenna Information 8/23 Tx1 antenna: 2450 MHz 9 Center Frequency H-Pol V-Pol Peak Gain -4.66 -3.05 May 11, 2012 Regulatory WLAN Antenna Information 9/23 Tx1 antenna: 2500 MHz Center Frequency H-Pol V-Pol Peak Gain -3.20 -3.00 May 11, 2012 Regulatory WLAN Antenna Information 10/23 5150-5350MHz radiation characteristic Tx1 antenna: 5150 MHz Center Frequency H-Pol V-Pol Peak Gain -1.18 -6.65 May 11, 2012 Regulatory WLAN Antenna Information 11/23 Tx1 antenna: 5250 MHz Center Frequency H-Pol V-Pol Peak Gain -0.33 -5.44 May 11, 2012 Regulatory WLAN Antenna Information 12/23 Tx1 antenna: 5350 MHz Center Frequency H-Pol V-Pol Peak Gain 0.52 -4.10 May 11, 2012 Regulatory WLAN Antenna Information 13/23 5470-5725MHz radiation characteristic Tx1 antenna: 5470 MHz Center Frequency H-Pol V-Pol Peak Gain 0.64 -2.23 May 11, 2012 Regulatory WLAN Antenna Information 14/23 Tx1 antenna: 5600 MHz Center Frequency H-Pol V-Pol Peak Gain 0.11 -2.65 May 11, 2012 Regulatory WLAN Antenna Information 15/23 Tx1 antenna: 5725 MHz Center Frequency H-Pol V-Pol Peak Gain -0.45 -3.04 May 11, 2012 Regulatory WLAN Antenna Information 16/23 5725-5850MHz radiation characteristic Tx1 antenna: 5725 MHz Center Frequency H-Pol V-Pol Peak Gain -0.45 -3.04 May 11, 2012 Regulatory WLAN Antenna Information 17/23 Tx1 antenna: 5785 MHz Cen…

Text truncated - open the document above for the full version.

Authorization on Behalf of Hewlett-Packard Company For the US Federal Communications Commission Office of Engineering and Technology and Other FCC Programs and Offices 1. I, David P. Adams, am Canada/USA Technical Regulations Manager for Hewlett-Packard Company (“Hewlett-Packard”) and Applicant/Grantee Contact of Record for Hewlett-Packard together with its subsidiaries and affiliates worldwide (collectively, “HP”) for HP’s dealings with the United States Federal Communications Commission (“FCC”). I am duly authorized by HP to make this Authorization on HP’s behalf. 2. This Authorization will designate the person named below to act on my behalf and HP’s behalf as authorized agent and representative, until further notice, with the additional power to designate one or more third party agents for HP with regard to particular matters and applications. All acts carried out and requests made by this named representative relating to any matter before the FCC, including requests for confidentiality, shall have the same effect as mine. Name: Leszek Langiewicz Title: Regulatory Program Manager Address: Hewlett-Packard Company 16399 West Bernardo Drive San Diego, CA 92127 Telephone: +1 858 655 5783 E-mail: [email protected] 3. Questions about the scope and effect of this Authorization should be addressed as follows: David P. Adams Canada/USA Region Technical Regulations Manager Hewlett-Packard Company 1501 Page Mill Road, MS 1419 Palo Alto, CA 94304-1126 +1 650 258 7586 Telephone +1 650.362.6534 Fax [email protected] 4. I declare under penalty of perjury that the foregoing is true and correct, and that this Authorization was executed at Palo Alto, California, on the date indicated below my signature. ____________________________ Signature David P. Adams Canada/USA Technical Regulations Manager Hewlett-Packard Company ____June 24, 2013 ________________________ Date

Hewlett-Packard Company 1501 Page Mill Road, MS 1419. Palo Alto, CA 94304, USA hp.com FCCDELEGATION FOR SGS (WC) C_G Designation of Third Party Representative By Authorized Agent of Hewlett-Packard Company 1. I am an authorized agent and representative of Hewlett-Packard Company together with its subsidiaries and affiliates (collectively, “HP”), designated as such by David P. Adams as HP’s Applicant/Grantee Contact of Record for the FCC, pursuant to his Authorization as attached hereto. My name, address and contact information appear below. Any questions about the scope of this Designation of Third Party Representative should be directed to me. 2.Pursuant to this authority, I designate the third party identified below as HP’s agent for the matters and applications specified below, for the term specified below, unless earlier terminated by HP. a.Name, address and contact information: SGS Taiwan Ltd. Name: Willis Chen Title: Technical Asst. Manager 134, Wu Kung Road, Wuku Industrial Zone, TW- New Taipei City 24803 Tel: +886 2 2299 3279 Email: [email protected] b. Matters and applications covered (product and/or model identification, FCC ID): Hewlett-Packard Regulatory Model Number: FCC ID: HSTNH-I407G HSTNH-I408C HSTNH-I408CC B94HHI407G B94HHI408C B94HHI408CC c.Term of designation, unless earlier terminated by HP: 10 year(s). 1.All invoices for FCC’s services should be sent as specified in paragraph 2a, above. Licenses and test reports generated for HP should be sent as specified in paragraph 2a but copied to the undersigned. No access should be granted to any HP file or project information except as necessary in connection with the matters and applications specified in paragraph 2b. All acts carried out and requests made by the third party representative relating to any matter before the FCC, including requests for confidentiality, shall have the same effect as HP’s own. _______________________________ 9.16.2014 Signature Date Name: Leszek Langiewicz Title: Regulatory Program Manager Address: Hewlett-Packard Company 16399 West Bernardo Drive, San Diego, CA 92127 Telephone: +1 858 655 5783 E-mail: [email protected]

Equipment: Tablet Trademark(s) and Model(s):hp / HSTNH-I407G Manufacturer:INVENTEC CORPORATION FCC ID in case other parts of this equipment are subject to certification: B94HHI407G This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following test reports are subject to this declaration: Test report number:Issue date: T140821L15-D 2014/9/2 Company name: Hewlett-Packard Company Name/Title (legal representative): Leszek M. Langiewicz Address: 3000 Hanover Street, Palo Alto, California 94304, USA Phone: (858) 655-5783 Fax: E-mail: [email protected] Date: Sep. 18, 2014 Signature:

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Hewlett-Packard Company Address: 1501 Page Mill Road Palo Alto United States 94304 City: Palo Alto Country: United States To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: B94HHI407G Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04- der to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos Test Set-up Photos External Photos Justification: The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Planned Release Date STC: 180 dys (notes 2, 3, 4, 5) Date: 2014.09.18 Name and signature of applicant: Leszek M. Langiewicz Regulatory Program Manager Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

FCC ID: B94HHI407G IC: 3905A-HHI407G Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group APPENDIX 2 EXTERNAL PHOTOGRAPHS OF EUT FCC ID: B94HHI407G IC: 3905A-HHI407G Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group All View of EUT Front View of EUT FCC ID: B94HHI407G IC: 3905A-HHI407G Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Back View of EUT Side View of EUT – 1 FCC ID: B94HHI407G IC: 3905A-HHI407G Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_condition…

Text truncated - open the document above for the full version.