B94HHI408CCTablet

More HP resources ResourceLocation HP support • Online chat with an HP technician. • Find telephone numbers. • Locate HP service center locations. Go to http://www.hp.com/support. Product Notices, Warranty, and User Guide • Safety and regulatory information • The expressly provided HP Limited Warranty applicable to your tablet • Product documentation To access the user guides, select the HP Support Assistant app on the Start screen, select My computer, and then select User guides. Serial number, product number, model numberOn the back of the tablet Product description This product is a lightweight tablet and features a thin-panel display, processor, RAM, integrated battery pack, and an external AC adapter. The printed Quick Start guide identifies the hardware components of your tablet. The AC adapter has a rating of 100-240 V ac, 50/60 Hz, 0.3-1.0 A. You can access the latest user guide from the HP Support Assistant app. Specification The tablet operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50/60 Hz. Note: The tablet can operate on DC power using an industry-standard micro-B USB cable. The HP adapter included with your tablet is recommended for charging the tablet. Temperature Operating: Metric, 0°C to 40°C; U.S., 32°F to 104°F Relative humidity (noncondensing) Operating: 10% to 90% Regulatory information For regulatory identification purposes, your product is assigned a Regulatory Model Number (RMN), HSTNH-I408C or HSTNH-I408CC. The RMN is located on the back of the tablet, and should not be confused with the marketing name (if any, etc.) or product numbers (HP P/N, etc.). If required, regulatory markings for your country or region are located on the back of the unit, un- der the removable battery (if equipped), on the packaging, or elsewhere in this document. For more safety and regulatory information, refer to the Product Notices included with your tablet, accessible via the HP Support Assistant app. Product notices Some notices may not apply to your product. One or more integrated wireless devices are installed in this device. In some environments, the use of wireless devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. WARNING: To reduce the risk of electric shock or damage to the equipment, plug the AC adapter into an AC outlet that is easily accessible at all times. WARNING: To reduce potential safety issues, only the AC adapter provided with the product, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the product. WARNING: To reduce the possibility of heat-related injuries or of overheating the tablet, do not place the tablet directly on your lap. Do not allow a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The tablet and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950-1). WARNING: To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods. IMPORTANT: The battery(ies) in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Limited Warranty You can find the expressly provided HP Limited Warranty applicable to your product using the HP Support Assistant app. In some countries or regions, HP may provide a printed HP Limited Warranty in the box. For some countries or regions where the warranty is not provided in printed format, you may request a printed copy from http://www.hp.com/go/orderdocuments or write to: North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd. Boise, ID 83714, USA Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9 20063 Cernusco s/Naviglio (MI), Italy Asia Pacific: Hewlett-Packard, POD, P.O. Box 200 Alexandra Post Office, Singapore 911507 When you request a printed copy of your warranty, please include your product number, name, and postal address. IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to http://www.hp.com/ go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Quick Start Setting up your tablet 1 If you purchased a nano SIM card for your Internet data plan, install the SIM card in the SIM slot.* *Select models only 2 4 1 3 2 After charging the battery, press the power button to turn on the tablet. 1 2 3 4 5 3 Follow the on-screen instructions to select a language, a wireless network, and a Microsoft® account. Note: If you do not have a Microsoft account, you can create one now. Turn off the tablet On the Start screen, tap the Power icon, and then select Shut down. If your tablet becomes unresponsive, press and hold the power button until the tablet turns off. © Copyright 2014 Hewlett-Packard Development Company, L.P. SD Logo is a trademark of its proprietor. Microsoft and Windows are U.S. registered trademarks of the Microsoft group of companies. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying s…

Text truncated - open the document above for the full version.

1 Product Notices 2 إرات  ا 3 Pemberitahuan produk 4 Бележки за продукта 5 Obavještenja o proizvodu 6 Informace o produktu 7 Produktbemærkninger 8 Produkthinweise 9 Tootemärkused 10 Anuncios sobre productos 11 Σηειώσεις προϊόντος 12 Informations sur le produit 13 Obavijesti o proizvodima 14 Normative del prodotto 15 Өнім туралы ескертулер 16 Izstrādājuma paziņojumi 17 Įspėjimuose dėl produktų 18 Termékinformációkban 19 Productaankondigingen 20 Produktopplysninger 21 Informacje na temat produktów 22 Avisos do produto 23 Avisos sobre o produto 24 Notificări despre produs 25 Уведомления о продукте 26 Upozornenia o produkte 27 Obvestila o izdelku 28 Tuoteohjeista 29 Obaveštenja o proizvodu 30 Produktmeddelanden 31 ประกาศเกี ยวกับผลิตภัณฑ์ 32 Ürün Bildirimleri 33 Зауваження щодо виробу 34 製品 製品製品 製品 についての についてのについての についての注意事項 注意事項注意事項 注意事項 35 제품 제품제품 제품 고지사 고지사고지사 고지사 항 항항 항 36 产品通告 产品通告产品通告 产品通告 37 產品注意事項 產品注意事項產品注意事項 產品注意事項 38 'הודעות מוצר' 39 Regulatory notices 40 Federal Communications Commission notice The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. 41 Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. 42 Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. 43 Declaration of Conformity for products marked with the FCC logo (United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. For further information, contact: Manager of Corporate Product Regulations Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304 (650) 857-1501 To identify your product, refer to the part, series, or model number located on the product. 44 Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should be minimized. This device has been tested and demonstrated compliance when Bluetooth and WiFi are transmitting simultaneously. 45 Australia and New Zealand notices This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 1 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. 46 Avisos para o Brasil Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. Este equipamento atende aos limites de Taxa de Absorção Específica referente à exposição a campos elétricos, magnéticos e eletromagnéticos de radiofreqüências adotados pela ANATEL. 47 Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.. CAUTION: When usi…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除 非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天 。本報告未經本公司 書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible atand, for electronic format documents, subject to Terms and Conditions for Electronic Documents atAttention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司t (8862) 22993279f (8862) 22980488www.tw.sgs.com Member of SGS Group Report No. : EN/2014/90010 Page : 1 of 118 SAR TEST REPORT The following samples were submitted and identified on behalf of the client as: Equipment Under Test Ta b l e t Brand Name hp Model No. HSTNH-I408CC Company Name Hewlett-Packard Company Company Address 1501 Page Mill Road, Palo Alto, California 94304, USA Standards IEEE /ANSI C95.1 , C95.3, IEEE 1528, KDB248227 D01, KDB616217 D04, KDB865664 D01, KDB865664 D02, KDB941225 D01, KDB941225 D02, KDB941225 D03, FCC ID B94HHI408CC Date of Receipt Sep. 25, 2014 Date of Test(s) Sep. 29, 2014 ~ Oct. 01, 2014 Date of Issue Oct. 21, 2014 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any confi guration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan Electronic & Communication Laboratory or testin g done by SGS Taiwan Electronic & Communication Laboratory in connection with distribution or use of the product described in this report must be approved by SGS Taiwan Electronic & Communication Laboratory in writing. Signed on behalf of SGS Engineer Supervisor Afu Chen Ricky Huang Date: Oct. 21, 2014 Date: Oct. 21, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除 非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天 。本報告未經本公司 書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible atand, for electronic format documents, subject to Terms and Conditions for Electronic Documents atAttention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司t (8862) 22993279f (8862) 22980488www.tw.sgs.com Member of SGS Group Report No. : EN/2014/90010 Page : 2 of 118 Version Report Number Revision Date Memo EN/2014/90010 00 2014/10/17 Initial creation of test report. EN/2014/90010 01 2014/10/21 1 st modification This test report contains a reference to the previous version test report that it replaces. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除 非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天 。本報告未經本公司 書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible atand, for electronic format documents, subject to Terms and Conditions for Electronic Documents atAttention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No…

Text truncated - open the document above for the full version.

FCC ID: B94HHI408CC Report No.: ER/2014/90071 IC: 3905A-HHI408CC Issue Date: Oct. 16, 2014 Page: 1 of 173 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 22 SUBPART H, PART 24 SUBPART E and PART 27 SUBPART C AND INDUSTRY CANADA RSS-132, RSS-133 and RSS-139 REQUIREMENT OF Product Name: Tablet Brand Name: hp Model No.: HSTNH-I408CC Model Difference: N/A FCC ID: B94HHI408CC IC: 3905A-HHI408CC Report No.: ER/2014/90071 Issue Date: Oct. 16, 2014 FCC Rule Part: 2 , 22H & 24E & 27C IC Rule Part: RSS 132 Issue 3, RSS 133 Issue 6 and RSS 139 Is- sue 2 Prepared for (FCC): Hewlett-Packard Company 1501 Page Mill Road, Palo Alto, California 94304, USA Prepared for (IC): Hewlett-Packard Company 950 West Maude Ave. Sunnyvale California 94085 United States Prepared by: SGS Taiwan Ltd. Electronics & Communication Laboratory No.134, Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803 Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. FCC ID: B94HHI408CC Report No.: ER/2014/90071 IC: 3905A-HHI408CC Issue Date: Oct. 16, 2014 Page: 2 of 173 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group VERIFICATION OF COMPLIANCE Applicant (FCC): Hewlett-Packard Company 1501 Page Mill Road, Palo Alto, California 94304, USA Applicant (IC): Hewlett-Packard Company 950 West Maude Ave. Sunnyvale California 94085 United States Product Name: Tablet Brand Name: hp Model No.: HSTNH-I408CC Model Difference: N/A FCC ID: B94HHI408CC IC: 3905A-HHI408CC File Number: ER/2014/90071 Date of test: Sep. 25, 2014 ~ Oct. 14, 2014 Date of EUT Received: Sep. 25, 2014 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Electronics & Communication Laboratory The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in TIA/EIA-603-C-2004, Issue 3 of RSS-Gen and the energy emit- ted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rule PART 22 subpart H, PART 24 subpart E, PART 27 subpart C and IC stand- ards Issue 3 of RSS-132, Issue 6 of RSS-133, Issue 2 of RSS-139. The test results of this report relate only to the tested sample identified in this report. Test By: Date: Oct. 16, 2014 Marcus Tseng / Engineer Prepared By: Date: Oct. 16, 2014 Tiffany Kao / Clerk Approved By: Date: Oct. 16, 2014 Jim Chang / Supervisor FCC ID: B94HHI408CC Report No.: ER/2014/90071 IC: 3905A-HHI408CC Issue Date: Oct. 16, 2014 Page: 3 of 173 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-docum…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除 非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天 。本報告未經本公司 書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible atand, for electronic format documents, subject to Terms and Conditions for Electronic Documents atAttention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司t (8862) 22993279f (8862) 22980488www.tw.sgs.com Member of SGS Group Report No. : EN/2014/90010 Page : 1 of 7 APPENDIX 11. Photographs of Test Setup Fig.1 Photograph of the SAR measurement system Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除 非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天 。本報告未經本公司 書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible atand, for electronic format documents, subject to Terms and Conditions for Electronic Documents atAttention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司t (8862) 22993279f (8862) 22980488www.tw.sgs.com Member of SGS Group Report No. : EN/2014/90010 Page : 2 of 7 Photograph of the tissue simulant fluid liquid depth (Body) Fig.2.1 Fig.2.2 Fig.2.3 2450MHz 15 cm 15 cm 850MHz 1900MHz 15 cm Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除 非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天 。本報告未經本公司 書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible atand, for electronic format documents, subject to Terms and Conditions for Electronic Documents atAttention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司t (8862) 22993279f (8862) 22980488www.tw.sgs.com Member of SGS Group Report No. : EN/2014/90010 Page : 3 of 7 Body - distance between flat phantom and EUT is 0 mm Fig.3 EUT Back side mode to flat phantom Fig.4 EUT Top side to flat phantom Fig.5 EUT Bottom side to flat phantom 0 mm 0 mm 0 mm Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除 非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天 。本報告未經本公司 書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible atand, for electronic format documents, subject to Terms and Conditions for Electronic Documents atAttention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest e…

Text truncated - open the document above for the full version.