B94HNI61CKLUHSN-I61C

3390 East Harmony Road Fort Collins Colorado 80528 United States Date: 2023-12-11 FCC ID: B94HNI61CKLU To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing HP Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing HP Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, _____________________________________________ Liang Rong Chiao / Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch Tel.: T +886-2-37892469 E-mail: [email protected]

3390 East Harmony Road Fort Collins Colorado 80528 United States U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: HP Inc. FRN: 0025126541 Grantee Code: B94 Contact Person: Richard P Tarsio Street Address: 3390 East Harmony Road, Colorado, United States, City/Province/Zip: Fort Collins 80528 Tel.: 970-898-8713 Email: [email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Date: 2023-02-21 Signed by (printed name): Person: Richard P Tarsio

Intel Corporation acting as agent o n behalf of HP Inc. 3390 East Harmony Road, Fort Colli ns, CO American Certification Body 6731 Whittier Avenue Suite C110 McLean, VA 22101 US A Date: 01/15/2024 Ref: Application for Original Equipment Authorization for FCC ID: B94HNI61CKLU. Dear Examiner, This is to request FCC Authorization for original equipment under FCC ID: B94HNI61CKLU. The equipment in this application is HP model HSN-I61C. The equipment is a convertible PC coming in 2 variants with previously authorized transmitter modules as described below. The only difference between the 2 SKUs is the WLAN module. SKU#1: FCC ID: PD9BE200NG , originally granted 08/23/2023. This is a WLAN 802.11a/b/g/n/ac/ax/be module that is authorized for portable/mobile conditions. FCC ID: ZMOFM350GL16, granted 09/14/2021.3This is a PCS licensed transmitter LTE module authorized as single modular approval to Fibocomm Wireless. SKU#2: FCC ID: PD9AX211NG , originally granted 02/18/2021. This is a WLAN 802.11a/b/g/n/ac/ax module that is authorized for portable/mobile conditions. FCC ID: ZMOFM350GL16, granted 09/14/2021.3This is a PCS licensed transmitter LTE module authorized as single modular approval to Fibocomm Wireless. -Note(s): - Our intention is to apply the PAG re-use process for granting approval due to the Dynamic SAR feature using G/Hall sensors. - The TAS feature is enabled. The exact same authorized modules are re-used in this PC with the exact same algorithm and validation methods for time averaging SAR as approved by FCC. Antenna specifications for these modules are included within this filing. Sincerely, By: Title: _________________________ Benjamin LAVENANT Regulatory Engineer e-mail:[email protected]

Date: December 11, 2023 FCC ID: B94HNI61CKLU AUTHORIZATION LETTER To Whom It May Concern: HP Inc. hereby authorizes Intel Corporation S.A.S – WRF Lab, to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Intel Corporation S.A.S – WRF Lab on HP Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ___________________________________________ Liang Rong Chiao/ Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch Tel: +886-2-37892469 E-mail: [email protected]

Date: 2023-09-13 IC: 21374-FM350GL16 AGENCY AUTHORIZATION LETTER To whom it may concern: Fibocom Wireless Inc. hereby authorizes Intel Mobile Communications France S.A.S – WRF Lab, to act on its behalf in all matters relating to the Innovation, Science and Economic Development Canada (“ISED”) application for equipment authorization in connection with the IC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Intel Mobile Communications France S.A.S – WRF Lab behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, _________________________________________ Patrick Ma Fibocom Wireless Inc. E-mail: [email protected]

Date: January 24, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: B94HNI61CKLU. To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. ⚫Operational Description ⚫Block Diagram ⚫Schematics ⚫Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advan tage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. ⚫External Photos ⚫Internal Photos ⚫Test Setup Photos ⚫User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, By : Title: _________________________ Benjamin LAVENANT Regu latory Engineer e-mail: [email protected] Intel Corporation acting as agent on behalf of HP Inc. 3390 East Harmony Road, Fort Colli ns, CO

Date: December 11, 2023 Cover Letter for re-use of Test Data To Whom It May Concern: The initial application has been granted according to 47CFR Part 22/24/27/90/96 for FCC ID: ZMOFM350GL16; Granted on 09/14/2023. The new equipment to be Granted in this new application, according to FCC ID: B94HNI61CKLU, only differs from the initial version (FCC ID: ZMOFM350GL16) with the only 1 following point: 1. add a host Notebook PC (Model: HSN-I61C / Brand: HP) The 1 change described above do not affect the radio characteristics (WWAN) of the equipment. Consequently, radio test data retrieved from the initial application FCC ID: ZMOFM350GL16 can be re- used for the FCC ID: B94HNI61CKLU equipment. However, based on our knowledge and our engineering judgment of the device design, the changes made, the format and amount of spot–check test data are decided as below, 1. Sample amount: 1 2. Spot–check rule part, frequency band and test items Sample A FCC Rule Part Frequency Band Test Items FCCPart 22 824 MHz to 849 MHz 1. Conducted output power 2. RSE full test FCC Part 24 1850 MHz to 1910 MHz 1. Conducted output power 2. RSE full test FCC Part 27 704 MHz to 2690 MHz 1. Conducted output power 2. RSE full test FCC Part 90 814 MHz to 823 MHz 1. Conducted output power 2. RSE full test FCC Part 96 3550 MHz to 3700 MHz 1. Conducted output power 2. RSE full test We, HP Inc.is taking full responsibility to re-use these test data for its new application FCC ID: B94HNI61CKLU If you have any questions, feel free to contact us. Thank you. Sincerely yours, ___________________________________________ Liang Rong Chiao / Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch Tel: +886-2-37892469 E-mail: [email protected]

Intel Corporation S.A.S. Wireless Test Certification Center Antibes, France Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Date: 7/18/2023 Authorization for Use of Intel WWAN TAS Algorithm To Whom It May Concern: This letter authorizes Fibocom Wireless Incorporated to integrate the Intel WWAN TAS algorithm in the model FM350-GL-16 4G cellular module using FCC ID: ZMOFM350GL16. Intel WWAN TAS algorithm implemented in the MediaTek WWAN M.2 Cellular Modem, which is incorporated in the Fibocom M2 FM350-GL cellular module using FCCID: ZMOFM350GL approved by FCC on 10/19/2021. No changes will be made to the current version of Intel’s WWAN Time Averaging SAR (TAS) algorithm and associated Fibocom module. The Intel WWAN TAS algorithm to be implemented shall be the same algorithm evaluated by the Federal Communications Commission. If any questions concerning this authorization letter please contact me below. Benjamin Lavenant Wireless Regulatory Engineer Intel Wireless Communication Solutions – Regulatory [email protected]

Label information Model：HSN-I61C 1. Images of the e-label screen are provided below: RMN: HSN-I61C Contains Intel Radio model: BE200NGW Contains FCC ID: PD9BE200NG Contains IC: 1000M-BE200NG Fibocom model: FM350-GL-16 FCC ID: B94HNI61CKLU Contains IC: 21374-FM350GL16 Contains WNC Model: XRAV-1 Contains FCC ID: NKR-XRAV1 Contains IC: 4441A-XRAV1 2. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information on E-label In Manual FCC ID/IC number Yes No Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class A / B Digital Device user manual statements1 No Yes 3. Users are able to access the information in no more than three steps in a device’s menu. The actual Steps are: Choose esc or F10 > Advanced > Electronic Labels No special access codes or permissions are required to go through the above steps beyond entering a user-defined password to protect against unauthorized access to the device. 4. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. No. 5. Users are provided specific instructions on how to access the information. Yes. 6. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the manufacturer. The user cannot modify the e-label in formation. 7. A packaging label will be applied, and information that will remain on the package is Information on Packaging FCC ID/IC number Yes Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) Yes

Label information Model：HSN-I61C 1. Images of the e-label screen are provided below: RMN: HSN-I61C Contains Intel Radio model: AX211NGW Contains FCC ID: PD9AX211NG Contains IC: 1000M-AX211NG Fibocom model: FM350-GL-16 FCC ID: B94HNI61CKLU Contains IC: 21374-FM350GL16 Contains WNC Model: XRAV-1 Contains FCC ID: NKR-XRAV1 Contains IC: 4441A-XRAV1 2. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information on E-label In Manual FCC ID/IC number Yes No Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class A / B Digital Device user manual statements1 No Yes 3. Users are able to access the information in no more than three steps in a device’s menu. The actual Steps are: Choose esc or F10 > Advanced > Electronic Labels No special access codes or permissions are required to go through the above steps beyond entering a user-defined password to protect against unauthorized access to the device. 4. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. No. 5. Users are provided specific instructions on how to access the information. Yes. 6. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the manufacturer. The user cannot modify the e-label in formation. 7. A packaging label will be applied, and information that will remain on the package is Information on Packaging FCC ID/IC number Yes Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) Yes

Intel Corporation S.A.S – WRF Lab 425 rue de Goa – Le Cargo B6 - 06600 Antibes, France Tel. +33493001400 / Fax +33493001401 Reference:WRF-DCS-TF-021 Version: 013 Application Date: 04/04/2023 1 of 65 N° 1-6736 Scope available on www.cofrac.fr CERTIFICATE #3478.01 TEST REPORT EUT Description Wireless Module installed in Convertible PC Brand Name Intel® Wi-Fi 6E AX211 Model Name AX211NGW FCC/IC ID PD9AX211NG; 1000M-AX211NG Date of Test Start/End 2024-01-17/ 2024-02-02 Features 802.11ax, Dual Band, 2x2 Wi-Fi + Bluetooth® 5.2 (see section 5) Description Platform: HSN-I61C + Vendor 1 and vendor 2 antenna Applicant Intel Corporation SAS Address 425 Rue de Goa – Le Cargo B6 – 06600 Antibes, FRANCE Contact Person Benjamin Lavenant Telephone/Fax/ Email [email protected] Reference Standards FCC 47 CFR Part §2.1093 RSS-102, issue 5 (see section 1) RF Exposure Environment Portable devices - General population/uncontrolled exposure Exposure Conditions Body worn SAR Result SAR Limit Maximum SAR Result & Limit 1.53 W/kg (1g) 1.6 W/kg (1g) Min. test separation distance 0mm to phantom, 1.90 mm to antenna edge Test Report identification 231128-03.TR02 Revision Control Rev. 00 This test report revision replaces any previous test report revision. (see section 8) The test results relate only to the samples tested. Reference to accreditation shall be used only by full reproduction of test report. Issued by Reviewed by Yamine HADDAD (Test Engineer) Adel LOUNES (Test Lead Engineer) Test Report N° 231128-03.TR02 Rev. 00 2 of 65 Table of Contents 1. Standards, reference documents and applicable test methods ......................................................................... 4 2. General conditions, competences and guarantees ............................................................................................. 4 3. Environmental Conditions ...................................................................................................................................... 5 4. Test samples ............................................................................................................................................................ 5 5. EUT Features ............................................................................................................................................................ 6 6. Remarks and comments ....................................................................................................................................... 12 7. Test Verdicts summary ......................................................................................................................................... 12 8. Document Revision History .................................................................................................................................. 12 Annex A. Test & System Description ..................................................................................................................... 13 SAR DEFINITION ................................................................................................................................................. 13 SPEAG SAR MEASUREMENT SYSTEM ................................................................................................................ 14 A.2.1 SAR Measurement Setup .......................................................................................................................................... 14 A.2.2 E-Field Measurement Probe ...................................................................................................................................... 15 A.2.3 Flat Phantom ............................................................................................................................................................. 15 A.2.4 Device Positioner ....................................................................................................................................................... 16 DATA EVALUATION .............................................................................................................................................. 17 SYSTEM AND LIQUID CHECK ................................................................................................................................ 19 A.4.1 System Check ........................................................................................................................................................... 19 A.4.2 Liquid Check .............................................................................................................................................................. 20 TEST EQUIPMENT LIST ........................................................................................................................................ 21 A.5.1 Tissue Simulant Liquid .............................................................................................................................................. 21 MEASUREMENT UNCERTAINTY EVALUATION ......................................................................................................... 22 RF EXPOSURE LIMITS ......................................................................................................................................... 23 Annex B. Test Results ............................................................................................................................................. 24 TEST CONDITIONS ............................................................................................................................................... 24 B.1.1 Test SAR Test positions relative to the phantom ....................................................................................................... 24 B.1.2 Test signal, Output power and Test Frequencies ...................................................................................................... 24 B.1.3 Evaluation Exclus…

Text truncated - open the document above for the full version.

Test Report N° 231128-03.TR02 Rev. 00 56 of 65 Annex E. Calibration Certificates ID Device Type/Model Serial Number Manufacturer Calibration Certificate 084-000 5GHz System Validation Dipole D5GHzV2 1259 SPEAG 068-000 5GHz System Validation Dipole D5GHzV2 1164 SPEAG 070-000 2450GHz System Validation Dipole D2450GHzV2 937 SPEAG 003-007 Dosimetric E-field Probe EX3DV4 7465 SPEAG Dipole calibration According to the KDB 865664 D01, a dipole must be calibrated using a fully validated SAR system according to the tissue dielectric parameters and SAR probe calibration frequency required for device testing. However, instead of the typical annual calibration recommended by measurement standards, longer calibration intervals of up to three years may be considered when it is demonstrated that the SAR target, impedance and return loss of a dipole have remain stable according to the following requirements. The test laboratory must ensure that the required supporting information and documentation are included in the SAR report to qualify for the three-year extended calibration interval; otherwise, recommend annual calibration applies. Immediate re-calibration is required for the following conditions: 1. When the most recent return-loss result, measured at least annually, deviates by more than 20% from the previous measurement (i.e. value in dB × 0.2) or not meeting the required 20 dB minimum return-loss requirement. 2. When the most recent measurement of the real or imaginary parts of the impedance, measured at least annually, deviates by more than 5 Ohm from the previous measurement Test Report N° 231128-03.TR02 Rev. 00 57 of 65 The below results show the latest return loss and impedance measurements for each dipole performed by the lab: Dipole ID 070-000 Dipole 2450MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -23.00 56.00 + 4.60 j 2022-05-19 Last -23.05 53.63 + 6.34 j 2023-06-07 Dipole ID # 084-000 Dipole 5200MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -20.30 48.90 – 9.50 j 2022-03-17 Last -20.37 45.91 – 8.26 j 2023-12-19 Dipole 5300MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -26.50 49.20 – 4.60 j 2022-03-17 Last -24.80 49.91 – 5.76 j 2023-12-19 Dipole 5500MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -28.90 47.40 – 2.30 j 2022-03-17 Last -30.81 47.84 -1.81 j 2023-12-19 Dipole 5600MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -30.40 52.50 – 1.80 j 2022-03-17 Last -30.72 51.01 + 2.73 j 2023-12-19 Dipole 5800MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -35.80 51.60 + 0.40 j 2022-03-17 Last -35.42 50.71 + 1.55 j 2023-12-19 Test Report N° 231128-03.TR02 Rev. 00 58 of 65 Dipole ID # 068-000 Dipole 5200MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -29.5 49.5 - 3.30 j 2023-10-03 Dipole 5300MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -31.1 48.1 + 2.0 j 2023-10-03 Dipole 5500MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -25.9 46.4 + 3.20 j 2023-10-03 Dipole 5600MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -26.8 51.3 + 4.4 j 2023-10-03 Dipole 5800MHz Head TSL Return Loss [dB] Impedance [Ω] Date Initial Calibration -21.9 51.7 + 8.0 j 2023-10-03

Intel Corporation S.A.S – WRF Lab 425 rue de Goa – Le Cargo B6 - 06600 Antibes, France Tel. +33493001400 / Fax +33493001401 Reference:WRF-DCS-TF-073 Version: 007 Application Date: 03/13/2023 1 of 62 TEST REPORT EUT Description Wireless Module installed in Convertible PC Brand Name Intel® Wi-Fi 6E AX211 Model Name AX211NGW FCC ID PD9AX211NG Date of Test Start/End 2024-01-15 / 2024-02-02 Features 802.11ax, Dual Band, 2x2 Wi-Fi + Bluetooth® 5.2 (see section 5) Description Platform: HSN-I61C + Vendor 1/ Vendor 2 antenna Applicant Intel Corporation SAS Address 425 Rue de Goa – Le Cargo B6 – 06600 Antibes, FRANCE Contact Person Benjamin Lavenant Telephone/Fax/ Email [email protected] Reference Standards FCC 47 CFR Part §2.1093 (see section 1) RF Exposure Environment Portable devices - General population/uncontrolled exposure Testing Result Limit Maximum Power Density Result & Limit 7.27 W/m 2 (4cm 2 ) 10 W/m 2 (4cm 2 ) Maximum SAR Result & Limit 1.34 W/kg (1g) 1.6 W/kg (1g) Min. test separation distance 0mm to phantom, 1.90 mm to antenna edge (SAR), 2mm to probe tip (PD) Test Report identification 231128-03.TR03 Revision Control Rev. 00 This test report revision replaces any previous test report revision (see section 8) The test results relate only to the samples tested. Issued by Reviewed by Yamine HADDAD (Test Engineer) Adel LOUNES (Test Lead Engineer) Test Report N° 231128-03.TR03 Rev. 00 2 of 62 Table of Contents 1. Standards, reference documents and applicable test methods ......................................................................... 4 2. General conditions, competences and guarantees ............................................................................................. 4 3. Environmental Conditions ...................................................................................................................................... 5 4. Test samples ............................................................................................................................................................ 5 5. EUT Features ............................................................................................................................................................ 6 6. Remarks and comments ......................................................................................................................................... 9 7. Test Verdicts summary ........................................................................................................................................... 9 8. Document Revision History .................................................................................................................................... 9 Annex A. PD Test & System Description ............................................................................................................... 10 POWER DENSITY DEFINITION ............................................................................................................................... 10 SPEAG FREE SPACE MEASUREMENT SYSTEM ..................................................................................................... 10 A.2.1 Measurement Setup .................................................................................................................................................. 10 A.2.2 E-Field Measurement Probe ...................................................................................................................................... 11 A.2.3 Worst Case Linearization Error .................................................................................................................................. 12 A.2.4 Data Evaluation ......................................................................................................................................................... 12 SYSTEM CHECK .................................................................................................................................................. 13 TEST EQUIPMENT LIST ........................................................................................................................................ 14 MEASUREMENT UNCERTAINTY EVALUATION ......................................................................................................... 15 RF EXPOSURE LIMITS ......................................................................................................................................... 16 Annex B. SAR Test & System Description ............................................................................................................ 17 SAR DEFINITION ................................................................................................................................................. 17 SPEAG SAR MEASUREMENT SYSTEM ................................................................................................................ 18 B.2.1 SAR Measurement Setup .......................................................................................................................................... 18 B.2.2 E-Field Measurement Probe ...................................................................................................................................... 19 B.2.3 Flat Phantom ............................................................................................................................................................. 19 B.2.4 Device Positioner ....................................................................................................................................................... 20 DATA EVALUATION .............................................................................................................................................. 21 SYSTEM AND LIQUID CHECK ................................................................................................................................ 23 B.4.1 System …

Text truncated - open the document above for the full version.

Test Report N° 231128-03.TR03 Rev. 00 54 of 62 Annex F. Calibration Certificates ID Device Type/Model Serial Number Manufacturer Calibration Certificate 443-000 E-field Probe EUmmWV2 9538 SPEAG 003-007 Dosimetric E-field Probe EX3DV4 7465 SPEAG 097-000 System Validation Dipole 7000MHz D7GHzV2 1008 SPEAG Dipole calibration According to the KDB 865664 D01, a dipole must be calibrated using a fully validated SAR system according to the tissue dielectric parameters and SAR probe calibration frequency required for device testing. However, instead of the typical annual calibration recommende…

Text truncated - open the document above for the full version.