B94TNQ248HP2PDModel TPN-Q248

User Guide © Copyright 2018 HP Development Company, L.P. AMD is a trademark of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Intel, Celeron, and Pentium are trademarks of Intel Corporation in the U.S. and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: August 2018 Document Part Number: L11079-001 Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. Not all features are available in all editions or versions of Windows. Systems may require upgraded and/or separately purchased hardware, drivers, software or BIOS update to take full advantage of Windows functionality. Windows 10 is automatically updated, which is always enabled. ISP fees may apply and additional requirements may apply over time for updates. See http://www.microsoft.com. To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. Software terms By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund subject to the refund policy of your seller. For any further information or to request a full refund of the price of the computer, please contact your seller. Safety warning notice WARNING!To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950-1). iii iv Safety warning notice Processor configuration setting (select products only) IMPORTANT:Select computer products are configured with an Intel® Pentium® N35xx/N37xx series or a Celeron® N28xx/N29xx/N30xx/N31xx series processor and a Windows® operating system. If your computer is configured as described, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory reset to restore the original settings. v vi Processor configuration setting (select products only) Table of contents 1 Welcome ....................................................................................................................................................... 1 Finding information ............................................................................................................................................... 2 2 Components .................................................................................................................................................. 3 Locating hardware ................................................................................................................................................. 3 Locating software .................................................................................................................................................. 3 Labels ..................................................................................................................................................................... 4 3 Network connections ..................................................................................................................................... 6 Connecting to a wireless network ......................................................................................................................... 6 Using the wireless controls ................................................................................................................. 6 Wireless button ................................................................................................................. 6 Operating system controls ............................................................................................... 6 Connecting to a WLAN ......................................................................................................................... 7 Using HP Mobile Broadband (select products only) ............................................................................ 7 Using GPS (select products only) ........................................................................................................ 8 Using Bluetooth wireless devices (select products only) ................................................................... 8 Connecting Bluetooth devices .......................................................................................... 8 Using NFC to share information (select products only) ...................................................................... 8 Sharing .......................................................................................................................…

Text truncated - open the document above for the full version.

Regulatory, Safety, and Environmental Notices User Guide © Copyright 2018–2020 HP Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Java is a registered trademark of Oracle and/or its affiliates. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Sixth Edition: March 2020 First Edition: March 2018 Document Part Number: L25269-006 About This Guide This guide provides regulatory, safety, and environmental information that is compliant with U.S., Canadian, and international regulations for notebook computers, tablets, desktops, thin clients, personal workstations, all-in-ones, and point-of-sale terminals. To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. WARNING!Indicates a hazardous situation that, if not avoided, could result in serious injury or death. CAUTION:Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. IMPORTANT:Indicates information considered important but not hazard-related (for example, messages related to property damage). Warns the user that failure to follow a procedure exactly as described could result in loss of data or in damage to hardware or software. Also contains essential information to explain a concept or to complete a task. NOTE:Contains additional information to emphasize or supplement important points of the main text. TIP:Provides helpful hints for completing a task. iii iv About This Guide Table of contents 1 Regulatory notices ........................................................................................................................................ 1 Accessing regulatory labels ................................................................................................................................... 1 Federal Communications Commission notice ....................................................................................................... 1 Modifications ....................................................................................................................................... 2 Cables .................................................................................................................................................. 2 Products with wireless LAN devices or HP Mobile Broadband Modules ............................................. 2 Belarus regulatory notice ...................................................................................................................................... 3 Brazil notice ........................................................................................................................................................... 3 Canada notices ....................................................................................................................................................... 3 European Union regulatory notices ....................................................................................................................... 3 Declaration of Conformity ................................................................................................................... 3 Products with radio functionality (EMF) ........................................................................... 4 Restrictions for products with radio functionality (select products only) ....................... 4 Radio frequency bands and maximum power levels (select products and countries only) .................................................................................................................. 4 Ergonomics notice ............................................................................................................. 4 European telephone network declaration (Modem/Fax) ................................................. 5 Australia and New Zealand notice ......................................................................................................................... 5 China WWAN notice ................................................................................................................................................ 5 China radio equipment notice ................................................................................................................................ 5 Japan notice ........................................................................................................................................................... 6 Wireless LAN, Wireless WAN, and Bluetooth® certification markings ................................................ 6 Mexico notice ......................................................................................................................................................... 6 Singapore wireless notice ...................................................................................................................................... 6 South Korea notices ............................................................................................................................................... 7 Thailand wireless notice ........................................................................................................................................ 7 Taiwan NCC notices ................................................................................................................................................ 8 電磁波警語 ...........................................................................................................…

Text truncated - open the document above for the full version.

American Certification Body 6731 Whittier Avenue Suite C110 M cLean, VA 22101 USA Date: 07/10/2020 Ref: KDB 996369 D02 Module Q and A v01 Dear Examiner, This letter will attest that the FCC guidance in KDB 996369 D02 Module Q and A v01 for integrating modular transmitters into host equipment was followed for the preparation of this application under FCC ID: B94TNQ248HP2PD The equipment will include two previously authorized transmitter modules as described below and will re-use previous conducted/radiated spurious emissions from those modules original approval. WLAN/BT Module Original Intel FCC ID: PD9AX201D2, originally granted on 11/20/2018; Conducted/RF test reports 180717-03.TR01 thru TR06. LTE Module FCC ID: ZMOL850GL, granted 03/10/2017; test report RF170106C02. This is a PCS licensed transmitter LTE module authorized as single modular approval to Fibocomm Wireless. Conducted/RF test reports RF170106C02-1 thru 6. Antenna specifications for these modules are included within this filing. These modules are used in accordance with the original module approval conditions and therefore re-use of conducted/radiated spurious emissions is justified according to KDB 996369D02 Module Q and A v01 Sincerely, Steven C. Hackett Sr Regulatory Engineer, Intel Corporation acting as agent on behalf of HP Inc. 3390 East Harmony Road, Fort Collins, CO 80528 USA

HP Inc. 1501 Page Mill Road, Palo Alto, CA 94303-1112 USA www.hp.com Authority to Act as Agent May 22, 2019 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: WRF Lab is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). This authorization is for applications associated with HP FCC IDs: B94TNQ248HP2PD We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Name: Liang Rong Chiao Email: [email protected] Telephone: +886 3789-2469 Signature:

Date: 2020-05-21 IC: 21374-L850GL AGENCY AUTHORIZATION LETTER To whom it may concern: Fibocom Wireless Inc. hereby authorizes Intel Mobile Communications France S.A.S – WRF Lab, to act on its behalf in all matters relating to the Innovation, Science and Economic Development Canada (“ISED”) application for equipment authorization in connection with the IC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Intel Mobile Communications France S.A.S – WRF Lab behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, _________________________________________ Tingsi Wu Fibocom Wireless Inc. E-mail: [email protected]

Authorization on Behalf of HP Inc. For the US Federal Communications Commission Office of Engineering and Technology and Other FCC Programs and Offices 1. I, Richard P Tarsio, am on the Worldwide Technical Regulations staff of HP Inc. (HP) and Applicant/Grantee Contact of Record for HP Inc. together with its subsidiaries and affiliates worldwide (collectively, “HP”) for HP’s dealings with the United States Federal Communications Commission (“FCC”). I am duly authorized by HP Inc. to make this Authorization on HP Inc.’s behalf. 2. This Authorization will designate the person named below to act on my behalf and HP Inc.’s behalf as authorized agent and representative, until further notice, with the additional power to designate one or more third party agents for HP Inc. with regard to particular matters and applications. All acts carried out and requests made by this named representative relating to any matter before the FCC, including requests for confidentiality, shall have the same effect as mine. Name: Rong-Chiao Liang Title: Regulatory Program Manager Address: HP Inc. 10F, No. 66 Jingmao 2 nd Rd NanGang District Taipei, Taiwan 11568 Telephone: 866 2 37892469 E-mail: [email protected] 3. Questions about the scope and effect of this Authorization should be addressed as follows: Richard P Tarsio US Canada Technical Regulations 3390 East Harmony Road, MS 66 Fort Collins, CO 80528 970 898 8713 Telephone [email protected] 4. I declare under penalty of perjury that the foregoing is true and correct, and that this Authorization was executed at Fort Collins, Colorado on the date indicated below my signature. ____________________________ Signature Richard P Tarsio US Canada Technical Regulations HP Inc. Date: 24 June 2016

Ju ly 10, 2020 Subject: Co nfidentiality Request for FCC ID: B94TNQ248HP2PD Pursu ant to FCC 47 CRF 0.457(d) and 0.459 the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Permanent Short Term Short Term Permanent Short Term Permanent Short Term Permanent Short Term Permanent Short Term Permanent Short Term Permanent Short Term Short Term Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Antenna Specificatio ns Operation Description/TAS Operational Report Operational Description and Validation Report Operational Description/ Dynamic WLAN SAR Description Schematics / Parts Lists Test Setup Photos User’s Manual Intel Mobile Communications has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, Steven C. Hackett By: __________________________ ________________________ (Signature/Title 1 ) (Print Name) Sr Regulatory Engineer for Intel Corp acting as agent for HP Inc. X X

Sr Regulatory Engineer, Intel Corporation acting as agent on behalf of HP Inc. 3390 East Harmony Road, Fort Collins, CO American Certification Body 6731 Whittier Avenue Suite C110 McLean, VA 22101 US A Date: 7/10/2020 Ref: Application for Original Equipment Authorization for FCC ID: B94TNQ248HP2PD. Dear Examiner, This is to request FCC Authorization for original equipment under FCC ID: B94TNQ248HP2PD. The equipment in this application is HP model TPN-Q248 PC. The equipment is provided with a detachable keyboard for use in notebook or tablet mode as described within this filing. The equipment will also include two previously authorized transmitter modules as described below. FCC ID: PD9AX201D2 , originally granted 11/20/2018. This is a WLAN 802.11a/b/ g/n/ac/ax module that is authorized for portable/mobile conditions. FCC ID: ZMOL850GL, granted 03/10/2017. This is a PCS licensed transmitter LTE module authorized as single modular approval to Fibocomm Wireless A ntenna specifications for these modules are included within this filing. It is also our intention to apply the PAG re-use process for granting approvals. The full PAG review was previously perform ed under KDB 498903. We believe this application meets the conditions for PAG re-use as it is a special rf exposure c ompliance condition. The exact same WWAN authorized modules are re-used in this PC with the exact same algorithm and validation methods for time averaging SAR as approved in KDB 498903. S incerely, Steven C. Hackett

TPN-Q248 External Photos

Label & Label location for TPN-Q248 Bottom Side

WWAN module:L850-GL WLAN module:AX201D2W

Intel Corporation S.A.S – WRF Lab 425 rue de Goa – Le Cargo B6 - 06600 Antibes, France Tel. +33493001400 / Fax +33493001401 FO-041 SAR FCC-ISED WLAN Laptop Test Report Template_200110 1 of 121 Printed copies are not controlled documents CERTIFICATE #3478.01 N° 1-6736 Scope available on www.cofrac.fr TEST REPORT EUT Description Convertible PC Brand Name HP Model Name TPN-Q248 FCC ID B94TNQ248HP2PD Date of Test Start/End 2020-06-18 / 2020-07-02 Features WWAN (LTE, UMTS), WLAN, BT (see section 6) Description Platform: Fibocom M2 L850GL + WNC antenna Applicant HP Inc. Address 1501 Page Mill Road, Palo Alto CA 94304, USA Contact Person Sam Lin Telephone/Fax/ Email +886 2 37896331/[email protected] Reference Standards FCC 47 CFR Part §2.1093 RSS-102, issue 5 (see section 1) RF Exposure Environment Portable devices - General population/uncontrolled exposure SAR Result SAR Limit Maximum SAR Result & Limit 1.40 W/kg (1g) 1.6 W/kg (1g) Min. test separation distance 0mm to phantom, 2.1mm to antenna edge Test Report identification 200430-01.TR04 Revision Control Rev. 00 This test report revision replaces any previous test report revision (see section 9) The test results relate only to the samples tested. The test report shall not be reproduced in full, without written approval of the laboratory. Reference to accreditation shall be used only by full reproduction of test report. Issued by Reviewed by Vaso KACULINI (Test Lead Engineer) Cheiel IN (Technical Manager) Test Report N° 200430-01.TR04 Rev. 00 FO-041 SAR FCC-ISED WLAN Laptop Test Report Template_200110 2 of 121 Printed copies are not controlled documents Table of Contents 1. Standards, reference documents and applicable test methods ......................................................................... 4 2. General conditions, competences and guarantees ............................................................................................. 4 3. Preface ...................................................................................................................................................................... 5 4. Environmental Conditions ...................................................................................................................................... 6 5. Test samples ............................................................................................................................................................ 6 6. EUT Features ............................................................................................................................................................ 7 7. Remarks and comments ....................................................................................................................................... 12 8. Test Verdicts summary ......................................................................................................................................... 12 9. Document Revision History .................................................................................................................................. 12 Annex A. Test & System Description ..................................................................................................................... 13 SAR DEFINITION ................................................................................................................................................. 13 SPEAG SAR MEASUREMENT SYSTEM ................................................................................................................ 14 A.2.1 SAR Measurement Setup .......................................................................................................................................... 14 A.2.2 E-Field Measurement Probe ...................................................................................................................................... 15 A.2.3 SAM Phantom ........................................................................................................................................................... 15 A.2.4 Flat Phantom ............................................................................................................................................................. 16 A.2.5 Device Positioner ....................................................................................................................................................... 16 DATA EVALUATION .............................................................................................................................................. 17 SYSTEM AND LIQUID CHECK ................................................................................................................................ 19 A.4.1 System Check ........................................................................................................................................................... 19 A.4.2 Liquid Check .............................................................................................................................................................. 20 TEST EQUIPMENT LIST ........................................................................................................................................ 21 A.5.1 SAR System #2 ......................................................................................................................................................... 21 A.5.2 Shared Instrumentation ............................................................................................................................................. 22 A.5.3 Tissue Simulant Liquid .............................................................................................................................................. 22 MEASUREMENT UNCERTAINTY EVALUATION ......................................................................................................... 23 RF EXPOSURE LIMITS ....................…

Text truncated - open the document above for the full version.

Test Report N° 200430-01.TR04 Rev. 00 FO-041 SAR FCC-ISED WLAN Laptop Test Report Template_200110 115 of 121 Printed copies are not controlled documents Annex E. Calibration Certificates ID Device Type/Model Serial Number Manufacturer Calibration Certificate 0236 Dosimetric E-field Probe EX3DV4 3978 SPEAG “See attachments” 0277 750 MHz System Validation Dipole D750V3 1136 SPEAG “See attachments” 0278 835 MHz System Validation Dipole D835V2 4d192 SPEAG “See attachments” 0280 1750 MHz System Validation Dipole D1750V2 1133 SPEAG “See attachments” 0281 1900 MHz System Validation Dipole D1900V2 5d197 SPEAG “See attachments” 0283 2300 MHz System Validation Dipole D2300V2 1046 SPEAG “See attachments” 0284 2600 MHz System Validation Dipole D2600V2 1100 SPEAG “See attachments” Dipole calibration According to the KDB 865664 D01, a dipole must be calibrated using a fully validated SAR system according to the tissue dielectric parameters and SAR probe calibration frequency required for device testing. However, instead of the typical annual calibration recommended by measurement standards, longer calibration intervals of up to three years may be considered when it is demonstrated that the SAR target, impedance and return loss of a dipole have remain stable according to the following requirements. 1. When the most recent return-loss result, measured at least annually, deviates by more than 20% from the previous measurement (i.e. value in dB × 0.2) or not meeting the required 20 dB minimum return-loss requirement. 2. When the most recent measurement of the real or imaginary parts of the impedance, measured at least annually, deviates by more than 5 Ω from the previous measurement Test Report N° 200430-01.TR04 Rev. 00 FO-041 SAR FCC-ISED WLAN Laptop Test Report Template_200110 116 of 121 Printed copies are not controlled documents The below results show the latest return loss and impedance measurements for each dipole performed by the lab: ID #0277 Dipole 750 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -29.2 49.9 – 3.5 j 2019-01-17 Last -31.9 50.7 + 2.5 j 2020-05-28 ID #0278 Dipole 835 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -24.2 47.1 – 5.2 j 2019-01-17 Last -24.2 46.2 – 4.5 j 2020-05-28 ID #0280 Dipole 1750 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -28.2 46.3 – 0.7 j 2019-01-21 Last -25.5 47.8 + 4.9 j 2020-05-28 ID #0281 Dipole 1900 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -24.6 49.6 + 5.9 j 2019-01-21 Last -25.9 48.7 + 4.8 j 2020-05-28 ID #0283 Dipole 2300 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -26.1 45.8 – 2.2 j 2019-01-21 Last -24.5 50.7 + 5.8 j 2020-05-28 ID #0284 Dipole 2600 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -22.0 45.5 – 6.1 j 2019-01-21 Last -24.9 46.4 - 4.1 j 2020-05-28

Report No.: RF170106C02 Page No. 1 / 90 Report Format Version: 6.1.1 FCC Test Report (PART 22) Report No.: RF170106C02 FCC ID: ZMOL850GL Test Model: L850-GL Received Date: Jan. 06, 2017 Test Date: Jan. 10, 2017 ~ Feb. 14, 2017 Issued Date: Feb. 21, 2017 Applicant: Fibocom Wireless Inc. Address: 5/F, Tower A, Technology Building II, 1057 Nanhai Blvd, Nanshan, Shenzhen, China Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiw…

Text truncated - open the document above for the full version.