Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|
| 15 | 15E | 5.78 GHz - 5.78 GHz | 109.00 mW |
Grant NotesThis is an original filing for System Model TPN-Q250.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled
for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host
product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.40W/kg respectively.
SAR testing was performed to demonstrate RF compliance.