B94TNQ273GPPDModel TPN-Q273

User Guide © Copyright 2018 HP Development Company, L.P. AMD is a trademark of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Intel, Celeron, and Pentium are trademarks of Intel Corporation in the U.S. and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: August 2018 Document Part Number: L11079-001 Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. Not all features are available in all editions or versions of Windows. Systems may require upgraded and/or separately purchased hardware, drivers, software or BIOS update to take full advantage of Windows functionality. Windows 10 is automatically updated, which is always enabled. ISP fees may apply and additional requirements may apply over time for updates. See http://www.microsoft.com. To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. Software terms By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund subject to the refund policy of your seller. For any further information or to request a full refund of the price of the computer, please contact your seller. Safety warning notice WARNING!To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950-1). iii iv Safety warning notice Processor configuration setting (select products only) IMPORTANT:Select computer products are configured with an Intel® Pentium® N35xx/N37xx series or a Celeron® N28xx/N29xx/N30xx/N31xx series processor and a Windows® operating system. If your computer is configured as described, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory reset to restore the original settings. v vi Processor configuration setting (select products only) Table of contents 1 Welcome ....................................................................................................................................................... 1 Finding information ............................................................................................................................................... 2 2 Components .................................................................................................................................................. 3 Locating hardware ................................................................................................................................................. 3 Locating software .................................................................................................................................................. 3 Labels ..................................................................................................................................................................... 4 3 Network connections ..................................................................................................................................... 6 Connecting to a wireless network ......................................................................................................................... 6 Using the wireless controls ................................................................................................................. 6 Wireless button ................................................................................................................. 6 Operating system controls ............................................................................................... 6 Connecting to a WLAN ......................................................................................................................... 7 Using HP Mobile Broadband (select products only) ............................................................................ 7 Using GPS (select products only) ........................................................................................................ 8 Using Bluetooth wireless devices (select products only) ................................................................... 8 Connecting Bluetooth devices .......................................................................................... 8 Using NFC to share information (select products only) ...................................................................... 8 Sharing .......................................................................................................................…

Text truncated - open the document above for the full version.

Regulatory, Safety, and Environmental Notices User Guide © Copyright 2018 HP Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Java is a registered trademark of Oracle and/or its affiliates. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: March 2018 Document Part Number: L25269-001 About This Guide This guide provides regulatory, safety and environmental information that is compliant with U.S., Canadian, and international regulations for notebook computers, desktops, thin clients, and personal workstations. To access the latest user guides or manuals for your product, go to http://www.hp.com/support. Select Find your product, and then follow the on-screen instructions. WARNING!Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION:Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE:Text set off in this manner provides important supplemental information. iii iv About This Guide Table of contents 1 Regulatory notices for notebook and tablet computers .................................................................................... 1 Accessing regulatory labels ................................................................................................................................... 1 Federal Communications Commission notice ....................................................................................................... 1 Modifications ....................................................................................................................................... 2 Cables .................................................................................................................................................. 2 Products with wireless LAN devices or HP Mobile Broadband Modules ............................................. 2 Brazil notice ........................................................................................................................................................... 3 Canada notices ....................................................................................................................................................... 3 European Union regulatory notices ....................................................................................................................... 4 Declaration of Conformity ................................................................................................................... 4 Products with radio functionality (EMF) ........................................................................... 4 Restrictions for products with radio functionality (select products only) ....................... 4 Radio frequency bands and maximum power levels (select products only) ................... 4 European telephone network declaration (Modem/Fax) ................................................. 5 Ergonomics notice ............................................................................................................. 5 Germany .......................................................................................................... 5 Germany (Deutscher text) .............................................................................. 5 Australia and New Zealand notice ......................................................................................................................... 5 China WWAN notice ................................................................................................................................................ 6 Japan notice ........................................................................................................................................................... 6 Wireless LAN, Wireless WAN, and Bluetooth® certification markings ................................................ 6 Mexico notice ......................................................................................................................................................... 6 Singapore wireless notice ...................................................................................................................................... 7 South Korea notices ............................................................................................................................................... 7 Thailand WWAN wireless notice ............................................................................................................................ 7 Taiwan NCC notices ................................................................................................................................................ 7 Wireless LAN 802.11a devices ............................................................................................................ 7 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices .............................................. 8 Airline travel notice ................................................................................................................................................ 8 User-replaceable battery notices .......................................................................................................................... 8 Factory-sealed battery notices ............................................................................................................................. 8 Laser compliance ....…

Text truncated - open the document above for the full version.

Date: 2021-12-27 FCC ID: B94TNQ273GPPD AUTHORIZATION LETTER To Whom It May Concern: HP Inc. hereby authorizes Intel Mobile Communications France S.A.S – WRF Lab, to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Intel Mobile Communications France S.A.S – WRF Lab on HP Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, Liang Rong Chiao / Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch Tel: +886-2-37892469 E-mail: [email protected]

Date: March 11, 2022 Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Subject: Request for Confidentiality FCC ID: B94TNQ273GPPD To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. ⚫Schematic Diagram ⚫Block Diagram ⚫Operational Description ⚫Parts List ⚫Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. ◆External Photos ◆Internal Photos ◆Test Setup Photos ◆Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ____________________________________________________ Liang Rong Chiao / Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch Tel: +886-2-37892469 E-mail: [email protected]

Sr Regulatory Engineer, Intel Corporation acting as agent on behalf of HP Inc. 3390 East Harmony Road, Fort Collins, CO American Certification Body 6731 Whittier Avenue Suite C110 McLean, VA 22101 US A Date: 03/11/2022 Ref: Application for Original Equipment Authorization for FCC ID: B94TNQ273GPPD Dear Examiner, This is to request FCC Authorization for original equipment under FCC ID: B94TNQ273GPPD. The equipment in this application is HP model TPN-Q273 PC. The equipment is a notebook PC. The equipment will also include two previously authorized transmitter modules as described below. FCC ID: PD9AX211D2 , originally granted 02/26/2021. This is a WLAN 802.11a/b/g/n/ac/ax module that is authorized for portable/mobile conditions. FCC ID: ZMOL850GL, granted 03/10/2017. This is a PCS licensed transmitter LTE module authorized as single modular approval to Fibocom Wireless The full PAG review was previously performed under KDB 498903. We believe this application may be granted without further PAG or PAG Re-use required. The exact same WWAN authorized modules are re-used in this PC with the exact same algorithm and validation methods for time averaging SAR as approved in KDB 498903. A ntenna specifications for these modules are included within this filing. S incerely, Steven C. Hackett

Page: 1 of 18 PHOTOGRAPHS OF EUT Front View of EUT Back View of EUT Page: 2 of 18 Side View of EUT – 1 Side View of EUT – 2 Page: 3 of 18 Side View of EUT – 3 Side View of EUT – 4 Page: 4 of 18 Side View of EUT – 5

Label & Label location for TPN-Q273 Bottom Side

Page: 5 of 18 Front View of Battery Back View of Battery Page: 6 of 18 Open View of EUT – 1 Open View of EUT – 2 Page: 7 of 18 Open View of EUT – 3 Open View of EUT – 4 Page: 8 of 18 Open View of EUT – 5 Open View of EUT – 6 Page: 9 of 18 Open View of EUT – 7 Internal View of EUT – 1 Page: 10 of 18 Internal View of EUT – 2 Internal View of EUT – 3 Page: 11 of 18 Internal View of EUT – 4 Internal View of EUT – 5 Page: 12 of 18 Internal View of EUT – 6 Internal View of EUT – 7 Page: 13 of 18 Internal View of EUT – 8 Internal View of EUT – 9 Page: 14 of 18 Internal View of EUT – 10 Internal View of EUT – 11 Page: 15 of 18 Internal View of EUT – 12 Internal View of EUT – 13 Page: 16 of 18 Internal View of EUT – 14 Internal View of EUT – 15 Page: 17 of 18 Internal View of EUT – 16 NFC Antenna Page: 18 of 18 WLAN Antenna WWAN Antenna

Intel Corporation S.A.S – WRF Lab 425 rue de Goa – Le Cargo B6 - 06600 Antibes, France Tel. +33493001400 / Fax +33493001401 Reference:WRF-DCS-TF-022 Version: 005 Application Date: 09/01/2021 1 of 106 CERTIFICATE #3478.01 TEST REPORT EUT Description WWAN module installed on Convertible PC Brand Name HP Model Name TPN-Q273 FCC ID B94TNQ273GPPD Date of Test Start/End 2022-02-08 / 2022-02-21 Features WWAN (LTE, UMTS), WLAN, BT (see section 6) Description HP TPN-Q273 + WNC antenna Applicant HP Inc. Address 1501 Page Mill Road, Palo Alto CA 94304 USA Contact Person Sam Lin Telephone / Email +886 2 37896331 / [email protected] Reference Standards FCC 47 CFR Part §2.1093 (see section 1) RF Exposure Environment Portable devices - General population/uncontrolled exposure Exposure Conditions Body worn SAR Result SAR Limit Maximum SAR Result & Limit 1.20 W/kg (1g) 1.6 W/kg (1g) Min. test separation distance 0mm to phantom, 2.4mm to antenna edge Test Report identification 211206-02.TR03 Revision Control Rev. 01 This test report revision replaces any previous test report revision (See section 9) The test results relate only to the samples tested. Reference to accreditation shall be used only by full reproduction of test report. Issued b y Reviewed by Edgar GARCIA (SAR Test Lead Engineer) Zayd OUACHICHA (Technical Manager) Test Report N° 211206-02.TR03 Rev. 01 2 of 106 Table of Contents 1. Standards, reference documents and applicable test methods ......................................................................... 4 2. General conditions, competences and guarantees ............................................................................................. 4 3. Preface ...................................................................................................................................................................... 5 4. Environmental Conditions ...................................................................................................................................... 6 5. Test samples ............................................................................................................................................................ 6 6. EUT Features ............................................................................................................................................................ 7 7. Remarks and comments ....................................................................................................................................... 11 8. Test Verdicts summary ......................................................................................................................................... 11 9. Document Revision History .................................................................................................................................. 11 Annex A. Test & System Description ..................................................................................................................... 12 SAR DEFINITION ................................................................................................................................................. 12 SAR MEASUREMENT SYSTEM ............................................................................................................................. 13 A.2.1 SAR Measurement Setup .......................................................................................................................................... 13 A.2.2 E-Field Measurement Probe ...................................................................................................................................... 14 A.2.3 Flat Phantom ............................................................................................................................................................. 14 A.2.4 Device Positioner ....................................................................................................................................................... 15 DATA EVALUATION .............................................................................................................................................. 16 SYSTEM AND LIQUID CHECK ................................................................................................................................ 18 A.4.1 System Check ........................................................................................................................................................... 18 A.4.2 Liquid Check .............................................................................................................................................................. 19 TEST EQUIPMENT LIST ........................................................................................................................................ 20 A.5.1 SAR System #2 ......................................................................................................................................................... 20 A.5.2 Shared Instrumentation ............................................................................................................................................. 20 A.5.3 Tissue Simulant Liquid .............................................................................................................................................. 21 MEASUREMENT UNCERTAINTY EVALUATION ......................................................................................................... 21 RF EXPOSURE LIMITS ......................................................................................................................................... 22 Annex B. Test Results ............................................................................................................................................. 23 TEST CONDITIONS ...................................................................................................................…

Text truncated - open the document above for the full version.

Test Report N° 211206-02.TR03 Rev. 01 100 of 106 Annex E. Calibration Certificates ID Device Type/Model Serial Number Manufacturer Calibration Certificate 002-009 Dosimetric E-field Probe EX3DV4 3978 SPEAG “See attached files” 071-000 750 MHz System Validation Dipole D750V3 1136 SPEAG “See attached files” 072-000 835 MHz System Validation Dipole D835V2 4d192 SPEAG “See attached files” 073-000 1750 MHz System Validation Dipole D1750V2 1133 SPEAG “See attached files” 074-000 1900 MHz System Validation Dipole D1900V2 5d197 SPEAG “See attached files” 075-000 2300 MHz System Validation Dipole D2300V2 1046 SPEAG “See attached files” 076-000 2600 MHz System Validation Dipole D2600V2 1100 SPEAG “See attached files” Dipole calibration According to the KDB 865664 D01, a dipole must be calibrated using a fully validated SAR system according to the tissue dielectric parameters and SAR probe calibration frequency required for device testing. However, instead of the typical annual calibration recommended by measurement standards, longer calibration intervals of up to three years may be considered when it is demonstrated that the SAR target, impedance and return loss of a dipole have remain stable according to the following requirements. 1. When the most recent return-loss result, measured at least annually, deviates by less than 20% from the previous measurement (i.e. value in dB × 0.2) and meeting the required 20 dB minimum return-loss requirement. 2. When the most recent measurement of the real and imaginary parts of the impedance, measured at least annually, deviates by less than 5 Ω from the previous measurement Test Report N° 211206-02.TR03 Rev. 01 101 of 106 The below results show the latest return loss and impedance measurements for each dipole performed by the lab: ID #071-000 Dipole 750 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -27.9 49.4 – 4.0 j 2021-01-21 WRF Lab verification -29.9 49.1 – 3.1 j 2022-01-17 ID #072-000 Dipole 835 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -22.9 46.9 – 6.2 j 2021-01-21 WRF Lab verification -20.6 43.7 – 6.0 j 2022-01-18 ID #073-000 Dipole 1750 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -28.5 46.5 – 0.7 j 2021-01-14 WRF Lab verification -29.3 46.7 – 0.0 j 2022-01-18 ID #074-000 Dipole 1900 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -24.1 49.2 + 6.1 j 2021-01-14 WRF Lab verification -21.9 50.6 + 8.1 j 2022-01-18 ID #075-000 Dipole 2300 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -25.1 45.6 – 3.0 j 2021-01-13 WRF Lab verification -26.6 48.3 – 4.3 j 2022-01-17 ID #076-000 Dipole 2600 MHz Body TSL Return Loss [dB] Impedance [Ω] Date Original Calibration -24.0 46.0 – 4.6 j 2021-01-13 WRF Lab verification -24.9 46.6 – 4.3 j 2022-01-14

Report No.: RF170106C02 Page No. 1 / 90 Report Format Version: 6.1.1 FCC Test Report (PART 22) Report No.: RF170106C02 FCC ID: ZMOL850GL Test Model: L850-GL Received Date: Jan. 06, 2017 Test Date: Jan. 10, 2017 ~ Feb. 14, 2017 Issued Date: Feb. 21, 2017 Applicant: Fibocom Wireless Inc. Address: 5/F, Tower A, Technology Building II, 1057 Nanhai Blvd, Nanshan, Shenzhen, China Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) Test Location: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies Report No.: RF170106C02 Page No. 2 / 90 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ........................................................................................................................... 4 2 Summary of Test Results ........................................................................................................................... 5 2.1 Measurement Uncertainty ..................................................................................................................... 5 2.2 Test Site and Instruments ..................................................................................................................... 6 3 General Information ................................................................................................................................... 8 3.1 General Description of EUT .................................................................................................................. 8 3.2 Configuration of System under Test ...................................................................................................... 9 3.2.1 Description of Support Units ....................................................................................................... 9 3.3 Test Mode Applicability and Tested Channel Detail ............................................................................ 10 3.4 E UT Operating Conditions .................................................................................................................. 13 3.5 General Description of Applied Standards .......................................................................................... 13 4 Test Types and Results ....................................................................................…

Text truncated - open the document above for the full version.