BCG-A2352Apple Watch

! Open your band box. Follow the steps to attach your band to your Apple Watch. " Put on your Apple Watch. Press and hold the side button to turn it on. # Open the Apple Watch app on your iPhone to set up your device. To charge, magnetically attach the charger to the back of the case. *Requires an iPhone connection to cellular service or a Wi-Fi network with calling enabled. For support, visit apple.com/support/watch. © 2020 Apple Inc. All rights reserved. Printed in XXXX. 034-04201-A Before using Apple Watch, review the Apple Watch User Guide at support.apple.com/guide/watch. You can also use Apple Books to download the guide (where available). Retain documentation for future reference. Safety and Handling See “Safety and handling” in the Apple Watch User Guide. Apple Watch, its operating systems, and the health sensors are not medical devices. Exposure to Radio Frequency For radio frequency exposure information for Apple Watch, open the Apple Watch app on iPhone and tap My Watch, then go to General > About > Legal > RF Exposure. Or go to apple.com/legal/rfexposure. Battery and Charging The lithium-ion battery in Apple Watch should be serviced or recycled by Apple or an authorized service provider. You may receive a replacement Apple Watch when ordering battery service. Batteries must be recycled or disposed of separately from household waste. For information about battery service and recycling, go to apple.com/batteries/service-and- recycling. For information about charging, see “Important safety information” in the Apple Watch User Guide. Medical Device Interference Apple Watch, some of the bands, the Apple Watch Magnetic Charging Cable, and the Apple Watch Magnetic Charging Dock contain magnets that may interfere with medical devices. See “Important safety information” in the Apple Watch User Guide. Avoiding Hearing Damage To prevent possible hearing damage, do not listen at high volume levels for long periods. More information about sound and hearing is available online at apple.com/sound and in “Important safety information” in the Apple Watch User Guide. Apple One-Year Limited Warranty Summary Apple warrants the included hardware product and accessories against defects in materials and workmanship for one year from the date of original retail purchase. Apple does not warrant against normal wear and tear, nor damage caused by accident or abuse. To obtain service, call Apple or visit an Apple Store or an Apple Authorized Service Provider—available service options are dependent on the country in which service is requested and may be restricted to the original country of sale. Call charges and international shipping charges may apply, depending on the location. Subject to the full terms and detailed information on obtaining service available at apple.com/legal/warranty and support.apple.com, if you submit a valid claim under this warranty, Apple will either repair, replace, or refund your Apple Watch at its own discretion. Warranty benefits are in addition to rights provided under local consumer laws. You may be required to furnish proof of purchase details when making a claim under this warranty. For Australian Consumers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Apple Pty Ltd, PO Box A2629, Sydney South, NSW 1235. Tel: 133-622. Regulatory Regulatory certification information is available on-device. Go to Settings > General > Regulatory. Additional regulatory information is in “Safety and handling” in the Apple Watch User Guide. FCC and ISED Canada Compliance for Apple Watch and Apple Watch Magnetic Charging Cable This device complies with part 15 of the FCC Rules and ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EU Compliance Apple Inc. hereby declares that this wireless device is in compliance with Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available at apple.com/euro/compliance. The CE marking on Apple Watch is located in the band attachment slot. Apple’s EU representative is Apple Distribution International Ltd., Hollyhill Industrial Estate, Cork, Ireland. European Union—Disposal Information The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. © 2020 Apple Inc. All rights reserved. Apple, the Apple logo, Apple Watch, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Apple Books is a trademark of Apple Inc. Apple Store is a service mark of Apple Inc., registered in the U.S. and other countries. Printed in XXXX. 034-03899-A Important safety information for Apple Watch WARNING: Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to Apple Watch or other property. Read all the safety information below before using Apple Watch. Handling Handle Apple Watch with care. Apple Watch cases are made of various materials that include the following: Aluminum Apple Watch case—7000 series aluminum, Ion-X glass (strengthened glass), composite back (plastic) Stainless Steel Apple Watch case—Stainless steel, sapph…

Text truncated - open the document above for the full version.

Electronic Label The regulatory information is programmed in a secured manner. Users or third parties cannot modify the regulatory information page on the device. Instructions to user Regulatory certification information is available on-device. Go to Settings > General > Regulatory. Packaging Label FCC ID: BCG-A2352 IC: 579C-A2352 One Apple Park Way, Cupertino, CA 95014 USA

FCC ID: BCG-A2352 SAR EVALUATION REPORT Approved by: Quality Manager Document S/N: Test Dates: DUT Type: Page 1 of 23 1C2004270022-01-R1.BCG 07/13/2020 Watch © 2020 PCTEST REV 21.4 M 09/11/2019 © 2020 PCTEST All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Date of Testing: Apple, Inc. 07/13/2020 One Apple Park Way Test Site/Location: Cupertino, CA 95014 USA PCTEST Lab, Morgan Hill, CA, USA Document Serial No.: 1C2004270022-01-R1.BCG F C C I D : BCG-A2352 A P P L I C A N T : APPLE, I N C. DUT Type: Watch Application Type: Certification FCC Rule Part(s): CFR §2.1093 Model: A2352 Note: This revised Test Report (S/N: 1C2004270022-01-R1.BCG) supersedes and replaces the previously issued test report on the same subject device for the same type of testing as indicated. Please discard or destroy the previously issued test report(s) and dispose of it accordingly. This watch has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures specified in Section 1.8 of this report; for North American frequency bands only. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. The SAR Tick is an initiative of the Mobile & Wireless Forum (MWF). While a product may be considered eligible, use of the SAR Tick logo requires an agreement with the MWF. Further details can be obtained by emailing: [email protected]. 1g Head (W/kg) 10g Extremity (W/kg) DTS 2.4 GHz WLAN 2412 - 2472 MHz 0.24 0.20 DSS/DTS Bluetooth 2402 - 2480 MHz 0.22 0.18 Band & Mode Tx Frequency Equipment Class SAR PCTEST 18855 Adams Ct, Morgan Hill, CA 95037 USA Tel. +1.410.290.6652 / Fax +1.410.290.6654 http://www.pctest.com SAR EVALUATION REPORT FCC ID: BCG-A2352 SAR EVALUATION REPORT Approved by: Quality Manager Document S/N: Test Dates: DUT Type: Page 2 of 23 1C2004270022-01-R1.BCG 07/13/2020 Watch © 2020 PCTEST REV 21.4 M 09/11/2019 © 2020 PCTEST All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1 DEVICE UNDER TEST .................................................................................................................................3 2 INTRODUCTION ...........................................................................................................................................6 3 DOSIMETRIC ASSESSMENT ......................................................................................................................7 4 TEST CONFIGURATION POSITIONS..........................................................................................................8 5 RF EXPOSURE LIMITS ................................................................................................................................9 6 FCC MEASUREMENT PROCEDURES ..................................................................................................... 10 7 RF CONDUCTED POWERS ...................................................................................................................... 11 8 SYSTEM VERIFICATION ........................................................................................................................... 13 9 SAR DATA SUMMARY .............................................................................................................................. 15 10 SAR MEASUREMENT VARIABILITY ........................................................................................................ 18 11 EQUIPMENT LIST ...................................................................................................................................... 19 12 MEASUREMENT UNCERTAINTIES.......................................................................................................... 20 13 CONCLUSION ............................................................................................................................................ 21 14 REFERENCES ........................................................................................................................................... 22 APPENDIX A: SAR TEST PLOTS APPENDIX B: SAR DIPOLE VERIFICATION PLOTS APPENDIX C: SAR TISSUE SPECIFICATIONS APPENDIX D: SAR SYSTEM VALIDATION APPENDIX E: DUT ANTENNA DIAGRAM & SAR TEST SETUP PHOTOGRAPHS APPENDIX F: PROBE AND DIPOLE CALIBRATION CERTIFICATES FCC ID: BCG-A2352 SAR EVALUATION REPORT Approved by: Quality Manager Document S/N: Test Dates: DUT Type: Page 3 of 23 1C2004270022-01-R1.BCG 07/13/2020 Watch © 2020 PCTEST REV 21.4 M 09/11/2019 © 2020 PCTEST All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any qu…

Text truncated - open the document above for the full version.

FCC ID: BCG-A2352 MEASUREMENT REPORT (CERTIFICATION) Approved by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 1 of 57 1C2004270022-03.BCG 05/01/2020 - 08/22/2020 Watch © 2020 PCTEST V 10.1 02/01/2020 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Apple Inc. One Apple Park Way Cupertino, CA 95014 United States Date of Testing: 05/01/2020 - 08/22/2020 Test Site/Location: PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.: 1C2004270022-03.BCG FCC ID: BCG-A2352 IC: 579C-A2352 APPLICANT: Apple Inc. Application Type: Certification Model/HVIN: A2352 EUT Type: Watch Max. RF Output Power: 47.973 mW (16.81 dBm) Peak Conducted Frequency Range: 2404 – 2478MHz FCC Classification: Digital Transmission System (DTS) FCC Rule Part(s): Part 15 Subpart C (15.247) ISED Specification: RSS-247 Issue 2 Test Procedure(s): ANSI C63.10-2013, KDB 558074 D01 v05r02 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013 and KDB 558074 D01 v05r02. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT FCC PART 15.247 / ISED RSS-247 Bluetooth (HDR) FCC ID: BCG-A2352 MEASUREMENT REPORT (CERTIFICATION) Approved by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 2 of 57 1C2004270022-03.BCG 05/01/2020 - 08/22/2020 Watch © 2020 PCTEST V 10.1 02/01/2020 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1.0 INTRODUCTION ...........................................................................................................................................3 1.1 Scope ................................................................................................................................................................... 3 1.2 PCTEST Test Location ......................................................................................................................................... 3 1.3 Test Facility / Accreditations ................................................................................................................................. 3 2.0 PRODUCT INFORMATION ...........................................................................................................................4 2.1 Equipment Description ......................................................................................................................................... 4 2.2 Device Capabilities ............................................................................................................................................... 4 2.3 Antenna Description ............................................................................................................................................. 5 2.4 Test Support Equipment ....................................................................................................................................... 5 2.5 Test Configuration ................................................................................................................................................ 6 2.6 Software and Firmware ........................................................................................................................................ 6 2.7 EMI Suppression Device(s)/Modifications ............................................................................................................ 6 3.0 DESCRIPTION OF TESTS ...........................................................................................................................7 3.1 Evaluation Procedure ........................................................................................................................................... 7 3.2 AC Line Conducted Emissions ............................................................................................................................. 7 3.3 Radiated Emissions .............................................................................................................................................. 8 3.4 Environmental Conditions ..................................................................................................................................... 8 4.0 ANTENNA REQUIREMENTS .......................................................................................................................9 5.0 MEASUREMENT UNCERTAINTY ............................................................................................................. 10 6.0 TEST EQUIPMENT CALIBRATION DATA ................................................................................................ 11 7.0 TEST RESULTS .......…

Text truncated - open the document above for the full version.

FCC ID: BCG-A2352 MEASUREMENT REPORT (CERTIFICATION) Approved by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 1 of 57 1C2004270022-04.BCG 05/01/2020 - 08/22/2020 Watch © 2020 PCTEST V 10.1 02/01/2020 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Apple Inc. One Apple Park Way Cupertino, CA 95014 United States Date of Testing: 05/01/2020 - 08/22/2020 Test Site/Location: PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.: 1C2004270022-04.BCG FCC ID: BCG-A2352 IC: 579C-A2352 APPLICANT: Apple Inc. Application Type: Certification Model/HVIN: A2352 EUT Type: Watch Max. RF Output Power: 77.804 mW (18.91 dBm) Peak Conducted Frequency Range: 2402 – 2480MHz FCC Classification: Digital Transmission System (DTS) FCC Rule Part(s): Part 15 Subpart C (15.247) ISED Specification: RSS-247 Issue 2 Test Procedure(s): ANSI C63.10-2013, KDB 558074 D01 v05r02 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013 and KDB 558074 D01 v05r02. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT FCC PART 15.247 / ISED RSS-247 Bluetooth (Low Energy) FCC ID: BCG-A2352 MEASUREMENT REPORT (CERTIFICATION) Approved by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 2 of 57 1C2004270022-04.BCG 05/01/2020 - 08/22/2020 Watch © 2020 PCTEST V 10.1 02/01/2020 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1.0 INTRODUCTION ...........................................................................................................................................3 1.1 Scope ................................................................................................................................................................... 3 1.2 PCTEST Test Location ......................................................................................................................................... 3 1.3 Test Facility / Accreditations ................................................................................................................................. 3 2.0 PRODUCT INFORMATION ...........................................................................................................................4 2.1 Equipment Description ......................................................................................................................................... 4 2.2 Device Capabilities ............................................................................................................................................... 4 2.3 Antenna Description ............................................................................................................................................. 5 2.4 Test Support Equipment ....................................................................................................................................... 5 2.5 Test Configuration ................................................................................................................................................ 6 2.6 Software and Firmware ........................................................................................................................................ 6 2.7 EMI Suppression Device(s)/Modifications ............................................................................................................ 6 3.0 DESCRIPTION OF TESTS ...........................................................................................................................7 3.1 Evaluation Procedure ........................................................................................................................................... 7 3.2 AC Line Conducted Emissions ............................................................................................................................. 7 3.3 Radiated Emissions .............................................................................................................................................. 8 3.4 Environmental Conditions ..................................................................................................................................... 8 4.0 ANTENNA REQUIREMENTS .......................................................................................................................9 5.0 MEASUREMENT UNCERTAINTY ............................................................................................................. 10 6.0 TEST EQUIPMENT CALIBRATION DATA ................................................................................................ 11 7.0 TEST RESULTS …

Text truncated - open the document above for the full version.

FCC ID: BCG-A2352 MEASUREMENT REPORT (CERTIFICATION) Approved by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 1 of 68 1C2004270022-02.BCG 05/01/2020 - 08/22/2020 Watch © 2020 PCTEST V 10.1 02/01/2020 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Apple Inc. One Apple Park Way Cupertino, CA 95014 United States Date of Testing: 05/01/2020 - 08/22/2020 Test Site/Location: PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.: 1C2004270022-02.BCG FCC ID: BCG-A2352 IC: 579C-A2352 APPLICANT: Apple Inc. Application Type: Certification Model/HVIN: A2352 EUT Type: Watch Frequency Range: 2412 – 2472MHz FCC Classification: Digital Transmission System (DTS) FCC Rule Part(s): Part 15 Subpart C (15.247) ISED Specification: RSS-247 Issue 2 Test Procedure(s): ANSI C63.10-2013, KDB 558074 D01 v05r02 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013 and KDB 558074 D01 v05r02. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT FCC PART 15.247 / ISED RSS-247 WLAN 802.11b/g/n FCC ID: BCG-A2352 MEASUREMENT REPORT (CERTIFICATION) Approved by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 2 of 68 1C2004270022-02.BCG 05/01/2020 - 08/22/2020 Watch © 2020 PCTEST V 10.1 02/01/2020 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1.0 INTRODUCTION .............................................................................................................................................. 4 1.1 Scope ................................................................................................................................................................... 4 1.2 PCTEST Test Location ......................................................................................................................................... 4 1.3 Test Facility / Accreditations ................................................................................................................................. 4 2.0 PRODUCT INFORMATION ............................................................................................................................. 5 2.1 Equipment Description ......................................................................................................................................... 5 2.2 Device Capabilities ............................................................................................................................................... 5 2.3 Antenna Description ............................................................................................................................................. 6 2.4 Test Support Equipment ....................................................................................................................................... 6 2.5 Test Configuration ................................................................................................................................................ 7 2.6 Software and Firmware ........................................................................................................................................ 7 2.7 EMI Suppression Device(s)/Modifications ............................................................................................................ 7 3.0 DESCRIPTION OF TESTS .............................................................................................................................. 8 3.1 Evaluation Procedure ........................................................................................................................................... 8 3.2 AC Line Conducted Emissions ............................................................................................................................. 8 3.3 Radiated Emissions .............................................................................................................................................. 9 3.4 Environmental Conditions ..................................................................................................................................... 9 4.0 ANTENNA REQUIREMENTS .............................................................................................…

Text truncated - open the document above for the full version.