BCG-A2997Apple Watch

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 July 21 , 2024 To whom it may concern: I, th e undersigned, hereby authorize Element Materials Technology Morgan Hill t o ac t on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Element Materials Technology Morgan Hill on our behalf sha ll have th e same effect as acts of our own. I, th e undersigned, hereby certify that w e ar e n ot subject t o a denial of federal benefits, that includes FCC benefits, pursuant t o Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Element Materials Technology Morgan Hill as our representative, we s till recognize that we ar e responsible to: A. comply with the relevant provisions of the certification program; B. make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; C. make claims regarding certification only in respect of the scope for which certification has been granted; D. do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; E. upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; F. use certification only to indicate the products are certified as being in conformity with specified standards; G. endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; H. ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; I. keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; J. take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; K. document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, Abhishek Rala Apple Inc. Global Certification Manager [email protected]

COVERED LIST ATTESTATION Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 July 21, 2024 Subject: CFR 47 §2.911 (d)(5)Attestation FCC ID: BCG-A2997 To Whom It May Concern: Apple Inc. (“Apple”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Apple certifies that, as of the date of the filing of the application, Apple is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an an entity identified on the Covered List. Sincerely, Abhishek Rala Apple Inc. Global Certification Manager [email protected]

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 July 21 , 2024 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: BCG To whom it may concern: Apple Inc. (“Apple”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above referenced grantee code. Apple acknowledges that it will maintain an agent for no less than one year after Apple has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Apple further acknowledges its responsibility under CFR 47 §2.929(c) t o inform the FCC whenever the agent information changes. Contact person: Abhishek Rala Company name: Apple Inc. FCC FRN: 0005899216 Company Address: One Apple Park Way, Cupertino, CA 95014 Email: [email protected] Sincerely, Abhishek Rala Apple Inc. Global Certification Manager [email protected]

CONFIDENTIALITY REQUEST Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: BCG-A2997 To Whom It May Concern: Pursuant to the provisions of Sections 0.457(d) and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: Long Term Confidentiality Schematic Diagram BOM Block Diagram Theory of Operation Antenna Specification These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: Short Term Confidentiality External Photographs Internal Photographs Test Setup Photographs User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. Sincerely, Abhishek Rala Apple Inc. Global Certification Manager [email protected]

A2997 Label & Location This device has an integral display that supports electronic labeling. The regulatory information is programmed in a secure manner such that neither users nor third parties can modify it. Instructions to user Regulatory information is accessed from the home screen via the following instructions which are printed in the user guide: “Regulatory certification information is available on-device. Go to Settings > General > Regulatory.” Packaging Label The following regulatory information is also printed on the packaging A2997 FCC ID: BCG-A2997 IC: 579C-A2997 One Apple Park Way, Cupertino, CA 95014 USA

A2998 Label & Location This device has an integral display that supports electronic labeling. The regulatory information is programmed in a secure manner such that neither users nor third parties can modify it. Instructions to user Regulatory information is accessed from the home screen via the following instructions which are printed in the user guide: “Regulatory certification information is available on-device. Go to Settings > General > Regulatory.” Packaging Label The following regulatory information is also printed on the packaging A2998 FCC ID: BCG-A2997 IC: 579C-A2997 One Apple Park Way, Cupertino, CA 95014 USA

FCC ID: BCG-A2997 IC: 579C-A2997 MAXIMUM PERMISSIBLE EXPOSURE REPORT Approved by: Technical Manager Test Report S/N: Test Dates: EUT Type: Page 1 of 12 1C2405230019-13.BCG 6/12/2024 - 08/01/2024 Watch Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Apple Inc. One Apple Park Way Cupertino, CA 95014 United States Date of Testing: 6/12/2024 - 08/01/2024 Test Report Issue: 8/6/2024 Test Site/Location: Element Materials Technology, Morgan Hill, CA, USA Test Report Serial No.: 1C2405230019-13.BCG FCC ID: BCG-A2997 IC: 579C-A2997 APPLICANT: Apple Inc. Application Type: Certification Model/HVIN: A2997, A2998 EUT Type: Watch FCC Rule Part: FCC Part 1 (§1.1310) and Part 2 (§2.1091) ISED Specification: RSS-102 Issue 6 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in FCC KDB 447498 D01. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Prepared by: WKR0000014197 Reviewed by: WKR0000005849 Element Materials Technology (formerly PCTEST) 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 408.538.5600 http://www.element.com RF EXPOSURE EVALUATION Maximal Permissible Exposure [MPE] FCC ID: BCG-A2997 IC: 579C-A2997 MAXIMUM PERMISSIBLE EXPOSURE REPORT Approved by: Technical Manager Test Report S/N: Test Dates: EUT Type: Page 2 of 12 1C2405230019-13.BCG 6/12/2024 - 08/01/2024 Watch Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1.0 RF EXPOSURE EVALUATION – MAXIMUM PERMISSIBLE EXPOSURE (MPE) ....................... 3 1.1 Introduction ..................................................................................................................................... 3 1.2 EUT Description .............................................................................................................................. 4 1.3 MPE Requirements Overview .......................................................................................................... 5 1.4 Procedure ....................................................................................................................................... 6 1.5 Summary of Results ...................................................................................................................... 10 2.0 CONCLUSION .......................................................................................................................... 12 FCC ID: BCG-A2997 IC: 579C-A2997 MAXIMUM PERMISSIBLE EXPOSURE REPORT Approved by: Technical Manager Test Report S/N: Test Dates: EUT Type: Page 3 of 12 1C2405230019-13.BCG 6/12/2024 - 08/01/2024 Watch Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. 1.0 R F E X P O S U R E E V A L U A T I O N – M A X I M U M P E R M I S S I B L E E X P O S U R E ( M P E ) 1.1 Introduction This document is prepared to show compliance with the RF Exposure requirements as required in §1.1310 of the FCC Rules and Regulations and RSS-102 of Industry Canada. The limit for Maximum Permissible Exposure (MPE), specified in FCC §1.1310 is listed in Table 1-1, and specified in RSS-102 is listed in Table 1-2. According to FCC §1.1310 and RSS-102: the criteria listed in the following tables shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b). Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) (i) Limits for Occupational / Controlled Exposure 0.3-3.0 614 1.63 *(100) ≤6 3.0-30 1842 / f 4.89 / f *(900 / f 2 ) <6 30-300 61.4 0.163 1.0 <6 300-1,500 f / 300 <6 1500-100,000 5 <6 (ii) Limits for General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) <30 1.34-30 824 / f 2.19 / f *(180 / f 2 ) <30 30-300 27.5 0.073 0.2 <30 300-1,500 f / 1500 <30 1500-100,000 1.0 <30 f = frequency in MHz. * = Plane-wave equivalent density Table 1-1. FCC Limits for Maximum Permissible Exposure (MPE) FCC ID: BCG-A2997 IC: 579C-A2997 MAXIMUM PERMISSIBLE EXPOSURE REPORT Approved by: Technical Manager Test Report S/N: Test Dates: EUT Type: Page 4 of 12 1C2405230019-13.BCG 6/12/2024 - 08/01/2024 Watch Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materi…

Text truncated - open the document above for the full version.

FCC ID: BCG-A2997 SAR EVALUATION REPORT Approved by: Technical Manager Document S/N: DUT Type: Page 1 of 42 1C2405230019-01.BCG (Rev 1) Watch REV 23.0 05/06/2024 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Date of Testing: Apple, Inc. 06/12/2024 - 07/10/2024 One Apple Park Way Test Report Issue Date: Cupertino, CA 95014 USA 08/06/2024 Test Site/Location: Element, Morgan Hill, CA, USA Document Serial No.: 1C2405230019-01.BCG (Rev 1) F C C I D : BCG-A2997 A P P L I C A N T : APPLE, I N C. DUT Type: Watch Application Type: Certification FCC Rule Part(s): CFR §2.1093 Model: A2997, A2998 Note: This revised Test Report supersedes and replaces the previously issued test report on the same subject device for the same type of testing as indicated. Please discard or destroy the previously issued test report(s) and dispose of it accordingly. This watch has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures specified in Section 0 of this report; for North American frequency bands only. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. The SAR Tick is an initiative of the Mobile & Wireless Forum (MWF). While a product may be considered eligible, use of the SAR Tick logo requires an agreement with the MWF. Further details can be obtained by emailing: [email protected]. SAR 1g Head (W/kg) 10g Extremity (W/kg) DTS 2.4 GHz WIFI 2412 - 2472 MHz 0.56 <0.1 NII 5 GHz WIFI U-NII-1: 5180 - 5240 MHz U-NII-2A: 5260 - 5320 MHz U-NII-2C: 5500 - 5720 MHz U-NII-3: 5745 - 5825 MHz 0.26 <0.1 DSS/DTS 2.4 GHz Bluetooth 2402 - 2480 MHz 0.41 <0.1 NII 802.15.4 ab-NB 5728.75 - 5846.25 MHz <0.1 <0.1 DXX NFC 13.56 MHz N/A <0.1 UWB UWB 6489.6 - 7987.2 MHz N/A <0.1 Simultaneous SAR per KDB 690783 D01v01r03: 0.67 <0.1 Equipment Class Band & Mode Tx Frequency APD (W/m²) APD (W/m²) UWB UWB 6489.6 - 7987.2 MHz N/A <0.1 Equipment Class Band & Mode Tx Frequency Reported PD (W/m²) Reported PD (W/m ² ) UWB UWB 6489.6 - 7987.2 MHz N/A 0.60 Equipment Class Band & Mode Tx Frequency ELEMENT MATERIALS TECHNOLOGY (formerly PCTEST) 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 408.538.5600 http://www.element.com SAR EVALUATION REPORT FCC ID: BCG-A2997 SAR EVALUATION REPORT Approved by: Technical Manager Document S/N: DUT Type: Page 2 of 42 1C2405230019-01.BCG (Rev 1) Watch REV 23.0 05/06/2024 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1 DEVICE UNDER TEST .................................................................................................................................3 2 INTRODUCTION ...........................................................................................................................................8 3 DOSIMETRIC ASSESSMENT ......................................................................................................................9 4 TEST CONFIGURATION POSITIONS....................................................................................................... 10 5 RF EXPOSURE LIMITS ............................................................................................................................. 11 6 FCC MEASUREMENT PROCEDURES ..................................................................................................... 13 7 RF CONDUCTED POWERS ...................................................................................................................... 16 8 SYSTEM VERIFICATION ........................................................................................................................... 21 9 SAR DATA SUMMARY .............................................................................................................................. 27 10 FCC MULTI-TX AND ANTENNA SAR CONSIDERATIONS ...................................................................... 32 11 SAR MEASUREMENT VARIABILITY ........................................................................................................ 35 12 EQUIPMENT LIST ...................................................................................................................................... 36 13 MEASUREMENT UNCERTAINTIES.......................................................................................................... 37 14 CONCLUSION ............................................................................................................................................ 40 15 REFERENCES ........................................................................................................................................... 41 APPENDIX A: SAR TEST PLOTS APPENDIX B: SAR DIPOLE VERIFICATION PLOTS APPENDIX C: PROBE AND DIPOLE CALIBRATION CERTIFICATES APPENDIX D: SAR TISSUE SPECIFICATIONS APPENDIX E: SAR SYSTEM VALIDATION APPENDIX F: DUT ANTENNA DIAGRAM & SAR TES…

Text truncated - open the document above for the full version.

A P P E N D I X A : S A R T E S T P L O T S A1 ELEMENT DUT: BCG-A2997; Type: Watch; Serial: FV0TK Communication System: UID:10415 - AAA, WLAN; MAIA: Y; Frequency: 2437.000 MHz Medium: 2450 Head; Medium parameters used: f = 2437.000 MHz; cond = 1.74 S/m; perm = 39.8; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 07/08/2024; Ambient Temp: 21.4°C; Tissue Temp: 20.4°C Probe: EX3DV4 - SN7682; ConvF:(7.87,7.72,8.18); Calibrated: 2024-05-13 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1683; Calibrated: 2024-05-08 Phantom: Twin-SAM V8.0; Serial: 1917 Measurement SW: DASY Module SAR V16.2.4.2524 Mode: 2.4 GHz WIFI/ IEEE 802.11b, 22 MHz Bandwidth, Exp: Head| Front Side, Ch. 6, 1 Mbps Aluminum, Sport Wristband Area Scan (80.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=5.0 mm, dy=5.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Reference Value = 0.45 W/kg; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.828 W/kg SAR(1 g) = 0.483 W/kg Smallest distance from peaks to all points 3 dB below is 12.0 mm Ratio of SAR at M2 to SAR at M1 = 84.2 % A2 ELEMENT DUT: BCG-A2997; Type: Watch; Serial: T4N59 Communication System: UID:10417 - AAD, WLAN; MAIA: Y; Frequency: 5720.000 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5720.000 MHz; cond = 5.12 S/m; perm = 33.9; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10.00 mm Test Date: 06/12/2024; Ambient Temp: 20.6°C; Tissue Temp: 21.0°C Probe: EX3DV4 - SN7427; ConvF:(4.35,4.78,4.93); Calibrated: 2024-02-09 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn467; Calibrated: 2024-02-09 Phantom: Twin-SAM V8.0; Serial: 2070 Measurement SW: DASY Module SAR V16.2.4.2524 Mode: 5 GHz WIFI/ IEEE 802.11a, 20 MHz Bandwidth, U-NII-2C, Exp: Head| Front Side, Ch. 144, 6.5 Mbps Aluminum, Metal Loop Wristband Area Scan (80.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (22.0 x 22.0 x 22.0): Measurement grid: dx=4.0 mm, dy=4.0 mm, dz=1.4 mm; Graded Ratio: 1.4 Reference Value = 0.14 W/kg; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.939 W/kg SAR(1 g) = 0.235 W/kg Smallest distance from peaks to all points 3 dB below is 7.9 mm Ratio of SAR at M2 to SAR at M1 = 60.7 % A3 ELEMENT DUT: BCG-A2997; Type: Watch; Serial: YYWC9 Communication System: UID:10032 - CAA, Bluetooth; MAIA: Y; Frequency: 2402.000 MHz Medium: 2450 Head; Medium parameters used: f = 2402.000 MHz; cond = 1.72 S/m; perm = 39.9; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10.00 mm Test Date: 07/08/2024; Ambient Temp: 21.4°C; Tissue Temp: 20.4°C Probe: EX3DV4 - SN7682; ConvF:(7.87,7.72,8.18); Calibrated: 2024-05-13 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1683; Calibrated: 2024-05-08 Phantom: Twin-SAM V8.0; Serial: 1917 Measurement SW: DASY Module SAR V16.2.4.2524 Mode: 2.4 GHz Bluetooth, Exp: Head| Front Side, Ch. 0, 1 Mbps Aluminum, Sport Wristband Area Scan (80.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=5.0 mm, dy=5.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Reference Value = 0.30 W/kg; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.529 W/kg SAR(1 g) = 0.318 W/kg Smallest distance from peaks to all points 3 dB below is 11.0 mm Ratio of SAR at M2 to SAR at M1 = 85.2 % A4 ELEMENT DUT: BCG-A2997; Type: Watch; Serial: T4N59 Communication System: UID:0 - -, CW; MAIA: Y; Frequency: 5846.300 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5846.300 MHz; cond = 5.29 S/m; perm = 33.6; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10.00 mm Test Date: 07/10/2024; Ambient Temp: 21.6°C; Tissue Temp: 20.9°C Probe: EX3DV4 - SN3949; ConvF:(5.21,5.21,5.21); Calibrated: 2023-10-02 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1684; Calibrated: 2023-09-12 Phantom: Twin-SAM V8.0; Serial: 1736 Measurement SW: DASY Module SAR V16.2.4.2524 Mode: 802.15.4 ab-NB, Exp: Head| Front Side, Ch. High, 1 Mbps Aluminum, Metal Loop Wristband Area Scan (100.0 x 100.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (24.0 x 24.0 x 22.0): Measurement grid: dx=4.0 mm, dy=4.0 mm, dz=1.4 mm; Graded Ratio: 1.4 Reference Value = 0.00 W/kg; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.074 W/kg SAR(1 g) = 0.015 W/kg Smallest distance from peaks to all points 3 dB below is 5.6 mm Ratio of SAR at M2 to SAR at M1 = 60.9 % A5 ELEMENT DUT: BCG-A2997; Type: Watch; Serial: T4N59 Communication System: UID:10415 - AAA, WLAN; MAIA: Y; Frequency: 2412.000 MHz Medium: 2450 Head; Medium parameters used: f = 2412.000 MHz; cond = 1.72 S/m; perm = 39.9; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0.00 mm Test Date: 07/08/2024; Ambient Temp: 21.4°C; Tissue Temp: 20.4°C Probe: EX3DV4 - SN7682; ConvF:(7.87,7.72,8.18); Calibrated: 2024-05-13 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1683; Calibrated: 2024-05-08 Phantom: Twin-SAM V8.0; Serial: 1917 Measurement SW: DASY Module SAR V16.2.4.2524 Mode: 2.4 GHz WIFI/ IEEE 802.11b, 22 MHz Bandwidth, Exp: Extremity| Back Side, Ch. 1, 1 Mbps Aluminum, Metal Links Wristband Area Scan (80.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=5.0 mm, dy=5.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Reference Value = 0.08 W/kg; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.140 W/kg SAR(10 g) = 0.035 W/kg Smallest distance from peaks to all points 3 dB below is 5.9 mm Ratio of SAR at M2 to SAR at M1 = 83.5 % A6 ELEMENT DUT: BCG-A2997; Type: Watch; Serial: 3XW6L Communication System: UID:10417 - AAD, WLAN; MAIA: Y; Frequency: 5825.000 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5825.000 MHz; cond = 5.21 S/m; perm = 33.7; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0.00 mm Test Date: 06/22/2024; Ambient Temp: 21.5°C; Tissue Temp: 19.6°C Probe: EX3DV4 - SN7427; ConvF:(4.35,4.78,4.93); Calibrated: 2024-02-09 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn467; Calibrated: 2024-02-09 Phantom: Twin-SAM V8.0; Serial: 2070 Measurement SW: DASY Mo…

Text truncated - open the document above for the full version.

A P P E N D I X B : S A R D I P O L E V E R I F I C A T I O N P L O T S B1 ELEMENT DUT: Dipole 13.000 MHz; Type: CLA-13 - SN1004 Communication System: UID: 0, CW; Frequency: 13.000 MHz Medium: 30 Head; Medium parameters used: f = 13.000 MHz; cond = 0.723 S/m; perm = 52.4; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0 mm Test Date: 07/09/2024; Ambient Temp: 22.0°C; Tissue Temp: 22.5°C Probe: EX3DV4 - SN3746; ConvF:(16.19,16.19,16.19); 2023-10-16 Sensor-Surface: 1.4mm (All points) Electronics: DAE4 Sn1237; 2023-10-18 Phantom: ELI V6.0; Serial: 2003 Measurement SW: DASY Module SAR V16.2.4.2524 13.0 MHz System Verification at 30.0 dBm (1000 mW) Area Scan (40.0 x 90.0): Measurement grid: dx=10.0 mm, dy=15.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=6.0 mm, dy=6.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Peak SAR (extrapolated) = 1.19 W/kg SAR(10 g) = 0.368 W/kg Deviation (10 g) = 3.37% B2 ELEMENT DUT: Dipole 2450.000 MHz; Type: D2450V2 - SN921 Communication System: UID: 0, CW; Frequency: 2450.000 MHz Medium: 2450 Head; Medium parameters used: f = 2450.000 MHz; cond = 1.75 S/m; perm = 39.8; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 07/08/2024; Ambient Temp: 21.4°C; Tissue Temp: 20.4°C Probe: EX3DV4 - SN7682; ConvF:(7.87,7.72,8.18); 2024-05-13 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1683; 2024-05-08 Phantom: Twin-SAM V8.0; Serial: 1917 Measurement SW: DASY Module SAR V16.2.4.2524 2450.0 MHz System Verification at 20.0 dBm (100 mW) Area Scan (40.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=5.0 mm, dy=5.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Peak SAR (extrapolated) = 10.4 W/kg SAR(1 g) = 5.26 W/kg; SAR(10 g) = 2.52 W/kg Deviation (1 g) = -2.95%; Deviation (10 g) = -1.18% B3 ELEMENT DUT: Dipole 5250.000 MHz; Type: D5GHzV2 - SN1066 Communication System: UID: 0, CW; Frequency: 5250.000 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5250.000 MHz; cond = 4.61 S/m; perm = 34.7; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 06/12/2024; Ambient Temp: 20.6°C; Tissue Temp: 21.0°C Probe: EX3DV4 - SN7427; ConvF:(4.73,5.26,5.35); 2024-02-09 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn467; 2024-02-09 Phantom: Twin-SAM V8.0; Serial: 2070 Measurement SW: DASY Module SAR V16.2.4.2524 5250.0 MHz System Verification at 17.0 dBm (50 mW) Area Scan (40.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (22.0 x 22.0 x 22.0): Measurement grid: dx=4.0 mm, dy=4.0 mm, dz=1.4 mm; Graded Ratio: 1.4 Peak SAR (extrapolated) = 15.0 W/kg SAR(1 g) = 3.77 W/kg Deviation (1 g) = -6.10% B4 ELEMENT DUT: Dipole 5250.000 MHz; Type: D5GHzV2 - SN1066 Communication System: UID: 0, CW; Frequency: 5250.000 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5250.000 MHz; cond = 4.61 S/m; perm = 34.7; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 06/22/2024; Ambient Temp: 21.5°C; Tissue Temp: 19.6°C Probe: EX3DV4 - SN7427; ConvF:(4.73,5.26,5.35); 2024-02-09 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn467; 2024-02-09 Phantom: Twin-SAM V8.0; Serial: 2070 Measurement SW: DASY Module SAR V16.2.4.2524 5250.0 MHz System Verification at 17.0 dBm (50 mW) Area Scan (40.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (22.0 x 22.0 x 22.0): Measurement grid: dx=4.0 mm, dy=4.0 mm, dz=1.4 mm; Graded Ratio: 1.4 Peak SAR (extrapolated) = 14.9 W/kg SAR(10 g) = 1.08 W/kg Deviation (10 g) = -6.49% B5 ELEMENT DUT: Dipole 5250.0 MHz; Type: D5GHzV2 - SN1123 Communication System: UID: 0, CW; Frequency: 5250.0 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5250.0 MHz; cond = 4.62 S/m; perm = 34.7; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 07/10/2024; Ambient Temp: 21.…

Text truncated - open the document above for the full version.