Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
SB 3/30/2026
FCC ID: BCG-A3582 IC: 579C-A3582 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/10/2026 - 7/22/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 1 of 62 1C2604100030-14-R1.BCG V 12.0 03/03/2026 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Apple Inc. One Apple Park Way Cupertino, CA 95014 United States Date of Testing: 6/10/2026 - 7/22/2026 Test Report Issue Date: 8/12/2026 Test Site/Location: Element Materials Technology Morgan Hill, CA, USA Test Report Serial No.: 1C2604100030-14-R1.BCG FCC ID: BCG-A3582 IC: 579C-A3582 APPLICANT: Apple Inc. Application Type: Certification Model/HVIN: A3582, A3586 EUT Type: Watch Operational Frequency: 6489.6MHz (Ch 5) and 7987.2MHz (Ch 9) FCC Classification: Ultra-Wideband Transmitter (UWB) FCC Rule Part(s): Part 15 Subpart F (15.519) ISED Specification: RSS-220 Issue 1 and RSS-Gen Issue 5 RSS 220 Subclass: Hand-held Communication Devices Test Procedures: ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a- 2024, KDB 393764 D01 v02r01 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 and KDB 393764 D01 v02r01. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. ELEMENT MATERIALS TECHNOLOGY (formerly PCTEST) 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 408.538.5600 http://www.element.com MEASUREMENT REPORT FCC PART 15.519 / ISED RSS-220 Ultra-Wideband FCC ID: BCG-A3582 IC: 579C-A3582 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/10/2026 - 7/22/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 2 of 62 1C2604100030-14-R1.BCG V 12.0 03/03/2026 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Revision Summary Revision Date Comments Revised By - 7-22-2026 Initial Release WKR014197 R1 8/04/2026 Addressed comments in sections 2.2 and 2.3 WKR0000005913 FCC ID: BCG-A3582 IC: 579C-A3582 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/10/2026 - 7/22/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 3 of 62 1C2604100030-14-R1.BCG V 12.0 03/03/2026 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1.0 INTRODUCTION ...........................................................................................................................................4 1.1 Scope ................................................................................................................................................4 1.2 Element Materials Technology Test Location ...................................................................................4 1.3 Test Facility / Accreditations .............................................................................................................4 2.0 PRODUCT INFORMATION ...........................................................................................................................5 2.1 Equipment Description ......................................................................................................................5 2.2 Device Capabilities ............................................................................................................................5 2.3 Antenna Description ..........................................................................................................................7 2.4 Test Support Equipment....................................................................................................................8 2.5 Test Configuration .............................................................................................................................8 2.6 Software and Firmware .....................................................................................................................9 2.7 EMI Suppression Device(s)/Modifications.........................................................................................9 3.0 DESCRIβ¦
Text truncated - open the document above for the full version.
FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 1 of 6 FCC Part 15 Antenna Gain Test Report Test Dates: 5/25/26 β 6/10/26 FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 2 of 6 Table of Contents 1. Scope .............................................................................................................................. 3 2. Reference Documents ...................................................................................................... 3 3. Test Personnel ................................................................................................................. 3 4. Test Equipment ............................................................................................................... 3 5. Commercial Test Software ............................................................................................... 3 6. Test Method .................................................................................................................... 4 7. Typical Test Setup ........................................................................................................... 5 8. Test results ...................................................................................................................... 6 9. Antenna Photos or Drawings ........................................................................................... 6 10. Antenna Description .................................................................................................... 6 11. Revision History ........................................................................................................... 6 FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 3 of 6 1. Scope This test report demonstrates compliance with the antenna gain reporting requirements of FCC 2.1033(b)(7), 15.203, 15.212. 2. Reference Documents FCC 2.1033(b)(7), 15.203, 15.212 3. Test Personnel Test personnel are valued team members. Their expertise insures accurate test results. Their identities are considered confidential by Apple. 4. Test Equipment Test Equipment Critical Specifications Cal due date Antenna Measurement System Fully anechoic OTA chamber with dual- polarized measurement antenna, mechanical positioners of Theta and Phi axes, and RF path switching. Frequency Range. 8/10/26 Power Meter - R&S NRP Frequency Range, Power Input Range 8/10/26 5. Commercial Test Software The test equipment operates under the control of commercial test software. For OTA chambers sold by ETS Lindgren, EMQuest v1.14 is used. FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 4 of 6 6. Test Method EIRP measurement is based on industry-standard method described in CTIA OTA Test Plan (current version 3.9.4). Peak gain (Horizontal and Vertical Polarization) is calculated by subtracting Conducted Power from the measured maximum EIRP. Testing is performed with Antenna integrated in the product Below is the measurement summary from the specification: FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 5 of 6 7. Typical Test Setup The device containing the integral antenna is placed on the styrofoam pylon (inside the OTA chamber) as pictured below. EUT FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 6 of 6 8. Test results See antenna gain exhibit 9. Antenna Photos or Drawings See internal photos exhibit 10. Antenna Description See technical description exhibit and antenna gain exhibit 11. Revision History Revision # Date Description of Change 1.0 July 29, 2026 Original END OF DOCUMENT
FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX F: Page 1 of 62 Watch A P P E N D I X F : LTE A N D NR L O W E R B A N D W I D T H R F C O N D U C T E D P O W E R S FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX F: Page 2 of 62 Watch F.1 LTE Lower Bandwidth RF Conducted Powers F.1.1 LTE Band 71 Table F-1 LTE Band 71 Measured P Max for ECI=1 (Head) and ECI=0 (Extremity) - 15 MHz Bandwidth Mid Channel 133297 (680.5 MHz) Conducted Power [dBm] 1024.350 13624.330 17424.270 36023.511 361823.481 363723.431 75023.451 15024.450 153024.400 156024.360 27023.391 272423.431 274823.381 1023.311 13623.281 17423.321 15023.431 153023.391 156023.351 27022.202 272422.222 274822.202 QPSK 0-1 RB OffsetRB Size MPR Allowed per 3GPP [dB] MPR [dB]Modulation 0-2 LTE Band 71 15 MHz Bandwidth 16QAM 0-2 0-3 0-5 0 0-1 FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX F: Page 3 of 62 Watch Table F-2 LTE Band 71 Measured P Max for ECI=1 (Head) and ECI=0 (Extremity) - 10 MHz Bandwidth Low ChannelMid ChannelHigh Channel 133172 (668.0 MHz) 133297 (680.5 MHz) 133422 (693.0 MHz) 1024.3124.3524.420 12524.3324.3724.480 14924.3324.3524.420 25023.4423.5123.581 251223.4323.4723.541 252523.4123.4523.521 50023.4123.4723.541 15024.0124.1024.171 151723.9824.0324.111 153523.9724.0224.091 27023.3823.3923.441 271223.3923.4323.491 272323.3323.3623.431 1023.2823.3223.391 12523.2923.3323.411 14923.2223.2723.341 25022.2122.2622.332 251222.1722.2122.282 252522.1822.2222.292 15022.1922.2322.322 151722.2022.2422.312 153522.2222.2622.332 27022.1722.2322.302 271222.1422.1922.242 272322.1322.2022.272 MPR [dB] QPSK 0-1 0 16QAM 0-2 0-3 0-5 0-1 0-2 RB SizeRB Offset MPR Allowed per 3GPP [dB] Conducted Power [dBm] Modulation LTE Band 71 10 MHz Bandwidth FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX F: Page 4 of 62 Watch Table F-3 LTE Band 71 Measured P Max for ECI=1 (Head) and ECI=0 (Extremity) - 5 MHz Bandwidth Low ChannelMid ChannelHigh Channel 133147 (665.5 MHz) 133297 (680.5 MHz) 133447 (695.5 MHz) 1024.3224.3724.480 11224.3524.4024.510 12424.2924.4224.440 12023.4023.5223.601 12623.4123.4923.611 121323.3923.5223.561 25023.3823.5023.591 1023.3323.3423.421 11223.3223.3523.411 12423.2723.3223.341 12022.2622.3122.342 12622.2522.2222.292 121322.2222.2322.292 25022.2022.2222.312 MPR [dB] LTE Band 71 5 MHz Bandwidth RB Size Conducted Power [dBm] 0-1 0 RB Offset MPR Allowed per 3GPP [dB] QPSK Modulation 16QAM 0-1 0-2 FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX F: Page 5 of 62 Watch F.1.2 LTE Band 12 Table F-4 LTE Band 12 Measured P Max for ECI=1 (Head) and ECI=0 (Extremity) - 5 MHz Bandwidth Low ChannelMid ChannelHigh Channel 23035 (701.5 MHz) 23095 (707.5 MHz) 23155 (713.5 MHz) 1023.9724.1824.120 11223.8924.1624.070 12423.9824.1524.090 12023.1723.1823.171 12623.1923.2723.241 121323.2123.2923.251 25023.2323.3023.291 1022.8622.9522.901 11222.9122.9622.891 12422.9122.9322.881 12021.9822.0121.992 12621.9522.0121.972 121321.9521.9921.972 25021.9622.0321.992 16QAM Conducted Power [dBm] 0-1 MPR Allowed per 3GPP [dB] QPSK LTE Band 12 5 MHz Bandwidth ModulationMPR [dB] 0 0-1 0-2 RB SizeRB Offset FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX F: Page 6 of 62 Watch Table F-5 LTE Band 12 Measured P Max for ECI=1 (Head) and ECI=0 (Extremity) β 3 MHz Bandwidth Low ChannelMid ChannelHigh Channel 23025 (700.5 MHz) 23095 (707.5 MHz) 23165 (714.5 MHz) 1023.8924.0823.890 1723.8224.0623.870 11423.8124.0823.790 8023.1223.3723.091 8423.0623.2823.061 8723.0623.3323.131 15023.0723.3523.051 1022.8122.9522.861 1722.8222.9322.851 11422.7922.8922.851 8021.8922.0521.922 8421.8521.9821.922 8721.8321.9821.912 15021.8922.0521.952 0-1 Conducted Power [dBm] 0-2 RB SizeRB Offset QPSK 16QAM Modulation 0 MPR Allowed per 3GPP [dB] MPR [dB] LTE Band 12 3 MHz Bandwidth 0-1 FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX F: Page 7 of 62 Watch Table F-6 LTE Band 12 Measured P Max for ECI=1 (Head) and ECI=0 (Extremity) - 1.4 MHz Bandwidth Low ChannelMid ChannelHigh Channel 23017 (699.7 MHz) 23095 (707.5 MHz) 23173 (715.3 MHz) 1023.8824.1323.900 1223.8524.0223.820 1523.8624.0923.830 3023.8624.0323.790 3223.8724.0523.910 3323.8924.0323.880 6022.9023.3022.900-11 1022.8422.8222.721 1222.8322.7622.721 1522.8222.8722.801 3022.9323.0722.911 3222.9323.0522.901 3322.9222.9622.851 6021.9321.9221.800-22 RB SizeRB Offset MPR Allowed per 3GPP [dB] Conducted Power [dBm] QPSK 0 LTE Band 12 1.4 MHz Bandwidth Modulation 16QAM 0-1 MPR [dB] FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clickingβ¦
Text truncated - open the document above for the full version.
FCC ID: BCG-A3582 IC: 579C-A3582 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/10/2026 - 8/6/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 1 of 14 1C2604100030-16.BCG Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Apple Inc. One Apple Park Way Cupertino, CA 95014 United States Date of Testing: 6/10/2026 - 8/6/2026 Test Report Issue: 8/6/2026 Test Site/Location: Element Materials Technology, Morgan Hill, CA, USA Test Report Serial No.: 1C2604100030-16.BCG FCC ID: BCG-A3582 IC: 579C-A3582 APPLICANT: Apple Inc. Application Type: Certification Model/HVIN: A3582, A3586 EUT Type: Watch FCC Rule Part: FCC Part 1 (Β§1.1310) and Part 2 (Β§2.1091) ISED Specification: RSS-102 Issue 6 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in FCC KDB 447498 D01. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Element Materials Technology (formerly PCTEST) 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 408.538.5600 http://www.element.com RF EXPOSURE EVALUATION Maximum Permissible Exposure [MPE] FCC ID: BCG-A3582 IC: 579C-A3582 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/10/2026 - 8/6/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 2 of 14 1C2604100030-16.BCG Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Revision Summary Revision Date Comments Revised By - 08/05/2026 Initial Release WKR0000005913 FCC ID: BCG-A3582 IC: 579C-A3582 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/10/2026 - 8/6/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 3 of 14 1C2604100030-16.BCG Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1.0 RF EXPOSURE EVALUATION β MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................ 4 1.1 Introduction ............................................................................................................................................ 4 1.2 EUT Description ..................................................................................................................................... 5 1.3 MPE Requirements Overview ................................................................................................................ 6 1.4 Procedure .............................................................................................................................................. 7 1.5 Summary of Results............................................................................................................................. 12 2.0 CONCLUSION ............................................................................................................................... 14 FCC ID: BCG-A3582 IC: 579C-A3582 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/10/2026 - 8/6/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 4 of 14 1C2604100030-16.BCG Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. 1.0 R F E X P O S U R E E V A L U A T I O N β M A X I M U M P E R M I S S I B L E E X P O S U R E ( M P E ) 1.1 Introduction This document is prepared to show compliance with the RF Exposure requirements as required in Β§1.1310 of the FCC Rules and Regulations and RSS-102 of Industry Canada. The limit for Maximum Permissible Exposure (MPE), specified in FCC Β§1.1310 is listed in Table 1-1, anβ¦
Text truncated - open the document above for the full version.
FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX I: Page 1 of 2 Watch A P P E N D I X I : P O W E R R E D U C T I O N V E R I F I C A T I O N FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX I: Page 2 of 2 Watch This device supports a different Exposure Condition Index (ECI) to configure different time-averaged power levels based on certain exposure conditions. When the speaker is active, ECI =1 represents the case where the device will be near the mouth of the user (in-front-of the face). ECI=0 represents the case when the speaker is inactive, and the device operates in close proximity to the userβs body. I.1 Main Antenna Power Reduction Verification Table Table I-1 Main Antenna Power Verification Test Case 0: Device speak off Test Case 1: Device speaker on I.2 WLAN Verification Summary This device supports a power reduction mechanism that reduces the WIFI duty cycle to a maximum of 30% when the cellular radio is turned on. The duty cycle reduction was verified by recording duty cycle with cellular radio on and off for both 2.4 GHz and 5 GHz WIFI. Table I-2 Power Measurement Verification WIFI I.3 Bluetooth Verification Summary Table I-3 Power Measurement Verification Bluetooth Figure I-1 Power Measurement Setup Maximum Test Case 1 LTE B701 NR Band n701 NR Band n4101 Mode/Band Exposure Condition Index (ECI) Maximum Test Case 1 Verdict FCM100.0%30.0% 99.5%29.1%PASS FCM100.0%30.0% 94.9%29.9%PASS Reduced Scenario Maximum Duty Cycle (%) Duty Cycle [%] 2.4 GHz WLAN 5 GHz WLAN Mode/BandAntenna Maximum Scenario Maximum Duty Cycle (%) Maximum Test Case 1 2.4 Bluetooth16.515.5 (+1/-1)1312 (+1/-1)16.2112.44 Mode/Band Maximum Scenario Maximum Allowed Tune Up Power [dBm] Maximum Scenario Minimum Allowed Target Power [dBm] Reduced Scenario Maximum Allowed Tune Up Power [dBm] Reduced Scenario Minimum Allowed Target Power [dBm] Conducted Power [dBm] Wireless DevicePower Sensor Power Meter
FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX G: Page 1 of 2 Watch A P P E N D I X G : S A R S Y S T E M V A L I D A T I O N FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX G: Page 2 of 2 Watch Per FCC KDB Publication 865664 D02v01r02, SAR system validation status should be documented to confirm measurement accuracy. The SAR systems (including SAR probes, system components and software versions) used for this device were validated against its performance specifications prior to the SAR measurements. Reference dipoles were used with the required tissue- equivalent media for system validation, according to the procedures outlined in FCC KDB Publication 865664 D01v01r04 and IEEE 1528-2013. Since SAR probe calibrations are frequency dependent, each probe calibration point was validated at a frequency within the valid frequency range of the probe calibration point, using the system that normally operates with the probe for routine SAR measurements and according to the required tissue-equivalent media. A tabulated summary of the system validation status including the validation date(s), measurement frequencies, SAR probes and tissue dielectric parameters has been included. Table G-1 SAR System Validation Summary β 1g & 10g NOTE: While the probes have been calibrated for both CW and modulated signals, all measurements were performed using communication systems calibrated for CW signals only. Modulations in the table above represent test configurations for which the measurement system has been validated per FCC KDB Publication 865664 D01v01r04 for scenarios when CW probe calibrations are used with other signal types. SAR systems were validated for modulated signals with a periodic duty cycle, such as GMSK, or with a high peak to average ratio (>5 dB), such as OFDM according to FCC KDB Publication 865664 D01v01r04. SENSITIVITY PROBE LINEARITY PROBE ISOTROPY MOD. TYPE DUTY FACTOR PAR AM141311/18/20257782164613HEAD0.76152.998PASSPASSPASSN/AN/AN/A AM1175003/11/202674271402750HEAD0.86142.137PASSPASSPASSN/AN/AN/A AM1475009/30/202577821646750HEAD0.86641.230PASSPASSPASSN/AN/AN/A AM675004/21/20267308501750HEAD0.86541.871PASSPASSPASSN/AN/AN/A AM1083503/30/20267421604835HEAD0.88343.254PASSPASSPASSGMSKPASSN/A AM1283502/17/202676391684835HEAD0.90041.500PASSPASSPASSGMSKPASSN/A AM15175001/29/2026374612371750HEAD1.41338.398PASSPASSPASSN/AN/AN/A AM13175004/07/2026749914651750HEAD1.36739.522PASSPASSPASSN/AN/AN/A AM131900 03/12/2026 749914651900HEAD1.38739.479PASSPASSPASSN/AN/AN/A AM162450 03/31/2026 755113232450HEAD1.80637.927PASSPASSPASSOFDM/TDDPASSPASS AM112450 03/12/2026 742714022450HEAD1.76639.576PASSPASSPASSOFDM/TDDPASSPASS AM142450 05/01/2026 778216462450HEAD1.77140.354PASSPASSPASSOFDM/TDDPASSPASS AM72450 04/23/2026 38377932450HEAD1.87339.028PASSPASSPASSOFDM/TDDPASSPASS AM112600 03/12/2026 742714022600HEAD1.89539.270PASSPASSPASSTDDPASSN/A AM142600 09/29/2025 778216462600HEAD2.05139.064PASSPASSPASSTDDPASSN/A AM72600 04/23/2026 38377932600HEAD2.05138.385PASSPASSPASSTDDPASSN/A AM162600 03/31/2026 755113232600HEAD1.97637.361PASSPASSPASSTDDPASSN/A AM95250 08/25/2025 766816815250HEAD4.51937.298PASSPASSPASSOFDMN/APASS AM85250 01/22/2026 749016445250HEAD4.71336.397PASSPASSPASSOFDMN/APASS AM95600 08/25/2025 766816815600HEAD4.91536.659PASSPASSPASSOFDMN/APASS AM85600 01/22/2026 749016445600HEAD5.14035.675PASSPASSPASSOFDMN/APASS AM95750 08/25/2025 766816815750HEAD5.08336.373PASSPASSPASSOFDMN/APASS AM85750 01/22/2026 749016445750HEAD5.32535.390PASSPASSPASSOFDMN/APASS AM95850 08/25/2025 766816815850HEAD5.20236.194PASSPASSPASSOFDMN/APASS AM85850 01/22/2026 749016445850HEAD5.44935.193PASSPASSPASSOFDMN/APASS CW VALIDATIONMOD. VALIDATION Probe Cal Point Perm. (Ξ΅r) SAR System DAEDateProbe SN Freq. (MHz) Cond. (Ο)
FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX E: Page 1 of 5 Watch A P P E N D I X E : M U L T I-T X A N D A N T E N N A S A R C O N S I D E R A T I O N S FCC ID: BCG-A3582 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. APPENDIX E: Page 2 of 5 Watch E.1 Introduction The following procedures adopted from FCC KDB Publication 447498 D04v01 are applicable to devices with built- in unlicensed transmitters such as 802.11 and Bluetooth devices which may simultaneously transmit with the licensed transmitter. E.2 Simultaneous Transmission Procedures This device contains transmitters that may operate simultaneously. Therefore, simultaneous transmission analysis is required. Per FCC KDB Publication 447498 D04v01 and IEEE 1528-2013 Section 6.3.4.1.2, simultaneous transmission SAR test exclusion may be applied when the sum of the 1g SAR for all the simultaneous transmitting antennas in a specific physical test configuration is β€1.6 W/kg. The different test positions in an exposure condition may be considered collectively to determine SAR test exclusion according to the sum of 1g or 10g SAR. In sub6 + WLAN/BT/802.15.4 ab-NB/NFC simultaneous transmission, WWAN transmission is managed and controlled by MediaTeK TAS (TA-SAR) feature. Since WLAN/BT/802.15.4 ab-NB/NFC does not employ time-averaging, 1g SAR measurements for WLAN/BT/802.15.4 ab-NB/NFC needβ¦
Text truncated - open the document above for the full version.
One Apple Park Way Β· Cupertino, California, 95014 Β· United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15F | 6.23 GHz - 6.75 GHz | - |
| 2 | 15F | 7.72 GHz - 8.25 GHz | - |
Smartphone
Equipment Class
6VL - 15E 6 GHZ Very Low Power DeviceMagnetic Charging Cable
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzMagnetic Charger
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzMagnetic Charger
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzSmartphone
Equipment Class
PCE - PCS Licensed Transmitter held to ear