BCG-A3584Apple Watch

 Date: 7/20/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: I, the undersigned, hereby authorize Element Materials Technology to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Element Materials Technology. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. In authorizing Element Materials Technology as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by Element Materials Technology (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements;  k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to Element Materials Technology or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

Apple Park, Cupertino, CA 95014 July 20 th , 2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: BCG-A3579 FCC ID: BCG-A3581 FCC ID: BCG-A3582 FCC ID: BCG-A3584 FCC ID: BCG-A3587 Apple Inc. (“Apple”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Apple certifies that as of the date of the filing of the application, the devices for which authorization is sought do not have cybersecurity and/or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees identified on the Covered List installed on the devices, nor will it be installed by the applicant anytime after certification. Apple certifies that, as of the date of the filing of the application, Apple is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

Apple Park, Cupertino, CA 95014 July 20 th , 2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: BCG To Whom It May Concern: Apple Inc. (“Apple”) as required by section 2.91 (d)(7), will also serve as the agent for service of process for the above referenced grantee code. Apple acknowledges that it will maintain an agent for no less than one year after Apple has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Apple further acknowledges its responsibility under CFR 47 2.929 (c) to inform the FCC whenever the agent information changes Contact person: Abhishek Rala Company name: Apple Inc. FCC FRN: 0005899216 Company Address: One Apple Park Way, Cupertino, CA 95014 Email: [email protected] Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

 Date: July 20 th , 2026 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID numbers To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Long-Term Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams • Electrical Schematic Diagrams • BOMs • Technical Descriptions • Antenna Gain, Antenna Specifications • Tune-up Procedure • Software Security Description These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Short-Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual Model(s)FCC ID A3579, A3580BCG-A3579 A3581, A3583BCG-A3581 A3582, A3586BCG-A3582 A3584, A3585BCG-A3584 A3587, A3588BCG-A3587 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com  These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected] Apple Inc. One Apple Park Way Cupertino, CA www.apple.com

Label and Location This device has an integral display that supports electronic labeling. The regulatory information is programmed in a secure manner such that neither users nor third parties can modify it. Instructions to user Regulatory information is accessed from the home screen via the following instructions which are printed in the user guide: “Regulatory certification information is available on-device. Go to Settings > General > Regulatory.” Packaging Label The following regulatory information is also printed on the packaging FCC ID: BCG-A3584 IC: 579C-A3584 One Apple Park Way, Cupertino, CA 95014 USA Label and Location This device has an integral display that supports electronic labeling. The regulatory information is programmed in a secure manner such that neither users nor third parties can modify it. Instructions to user Regulatory information is accessed from the home screen via the following instructions which are printed in the user guide: “Regulatory certification information is available on-device. Go to Settings > General > Regulatory.” Packaging Label The following regulatory information is also printed on the packaging FCC ID: BCG-A3584 IC: 579C-A3584 One Apple Park Way, Cupertino, CA 95014 USA

FCC ID: BCG-A3584 IC: 579C-A3584 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/1/2026 - 7/23/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 1 of 12 1C2604100029-11.BCG Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Apple Inc. One Apple Park Way Cupertino, CA 95014 United States Date of Testing: 6/1/2026 - 7/23/2026 Test Report Issue: 8/4/2026 Test Site/Location: Element Materials Technology, Morgan Hill, CA, USA Test Report Serial No.: 1C2604100029-11.BCG FCC ID: BCG-A3584 IC: 579C-A3584 APPLICANT: Apple Inc. Application Type: Certification Model/HVIN: A3584, A3585 EUT Type: Watch FCC Rule Part: FCC Part 1 (§1.1310) and Part 2 (§2.1091) ISED Specification: RSS-102 Issue 6 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in FCC KDB 447498 D01. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Element Materials Technology (formerly PCTEST) 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 408.538.5600 http://www.element.com RF EXPOSURE EVALUATION Maximum Permissible Exposure [MPE] FCC ID: BCG-A3584 IC: 579C-A3584 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/1/2026 - 7/23/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 2 of 12 1C2604100029-11.BCG Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Revision Summary Revision Date Comments Revised By - 08/03/2026 Initial Release WKR0000005913 FCC ID: BCG-A3584 IC: 579C-A3584 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/1/2026 - 7/23/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 3 of 12 1C2604100029-11.BCG Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1.0 RF EXPOSURE EVALUATION – MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................ 4 1.1 Introduction ............................................................................................................................................ 4 1.2 EUT Description ..................................................................................................................................... 5 1.3 MPE Requirements Overview ................................................................................................................ 6 1.4 Procedure .............................................................................................................................................. 7 1.5 Summary of Results............................................................................................................................. 11 2.0 CONCLUSION ............................................................................................................................... 12 FCC ID: BCG-A3584 IC: 579C-A3584 MEASUREMENT REPORT (CERTIFICATION) Test Dates: 6/1/2026 - 7/23/2026 EUT Type: Watch Approved by: Technical Manager Test Report S/N: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 4 of 12 1C2604100029-11.BCG Version 1.1, 8/14/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element Materials Technology. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. 1.0 R F E X P O S U R E E V A L U A T I O N – M A X I M U M P E R M I S S I B L E E X P O S U R E ( M P E ) 1.1 Introduction This document is prepared to show compliance with the RF Exposure requirements as required in §1.1310 of the FCC Rules and Regulations and RSS-102 of Industry Canada. The limit for Maximum Permissible Exposure (MPE), specified in FCC §1.1310 is listed in Table 1-1, an…

Text truncated - open the document above for the full version.

FCC ID: BCG-A3584 DUT Type: Watch RF EXPOSURE REPORT Approved by: Technical Manager Document S/N: 1C2604100029-12.BCG-R1 This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 1 of 36 REV 25.0 04/09/2026 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Date of Testing: Apple, Inc. 06/14/2026 – 07/08/2026 One Apple Park Way Test Report Issue Date: Cupertino, CA 95014 USA 08/07/2026 Test Site/Location: Element, Morgan Hill, CA, USA Document Serial No.: 1C2604100029-12.BCG-R1 F C C I D : BCG-A3584 A P P L I C A N T : APPLE, I N C. DUT Type: Watch Application Type: Certification FCC Rule Part(s): CFR §2.1093 Model: A3584, A3585 Note: This revised Test Report supersedes and replaces the previously issued test report on the same subject device for the same type of testing as indicated. Please discard or destroy the previously issued test report(s) and dispose of it accordingly. This watch has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures specified in Section 1.8 of this report; for North American frequency bands only. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. The SAR Tick is an initiative of the Mobile & Wireless Forum (MWF). While a product may be considered eligible, use of the SAR Tick logo requires an agreement with the MWF. Further details can be obtained by emailing: [email protected]. SAR 1g Head (W/kg) 10g Extremity (W/kg) DTS 2.4 GHz WIFI 2412 - 2472 MHz 0.30 <0.1 NII 5 GHz WIFI U-NII-1: 5180 - 5240 MHz U-NII-2A: 5260 - 5320 MHz U-NII-2C: 5500 - 5720 MHz U-NII-3: 5745 - 5825 MHz 0.20 <0.1 DSS/DTS 2.4 GHz Bluetooth 2402 - 2480 MHz 0.21 <0.1 NII 802.15.4 ab-NB 5728.75 - 5846.25 MHz <0.1 <0.1 DXX NFC 13.56 MHz N/A <0.1 UWB UWB 6489.6 - 7987.2 MHz N/A N/A Simultaneous SAR per KDB 690783 D01v01r03: 0.42 <0.1 Equipment Class Band & Mode Tx Frequency ELEMENT MATERIALS TECHNOLOGY (formerly PCTEST) 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 408.538.5600 http://www.element.com RF EXPOSURE REPORT FCC ID: BCG-A3584 DUT Type: Watch RF EXPOSURE REPORT Approved by: Technical Manager Document S/N: 1C2604100029-12.BCG-R1 This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 2 of 36 REV 25.0 04/09/2026 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Revision Summary Revision Description Issue Date Revised By - Initial Release 7/13/2026 WKR0000016715 R1 Addressed TCB Comments 7/28/2026 WKR0000016715 FCC ID: BCG-A3584 DUT Type: Watch RF EXPOSURE REPORT Approved by: Technical Manager Document S/N: 1C2604100029-12.BCG-R1 This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Page 3 of 36 REV 25.0 04/09/2026 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1 DEVICE UNDER TEST .................................................................................................................................4 2 INTRODUCTION ...........................................................................................................................................9 3 DOSIMETRIC ASSESSMENT ................................................................................................................... 10 4 TEST CONFIGURATION POSITIONS....................................................................................................... 11 5 RF EXPOSURE LIMITS ............................................................................................................................. 12 6 FCC MEASUREMENT PROCEDURES ..................................................................................................... 14 7 RF CONDUCTED POWERS ...................................................................................................................... 17 8 SYSTEM VERIFICATION ........................................................................................................................... 20 9 SAR DATA SUMMARY .............................................................................................................................. 26 10 SAR MEASUREMENT VARIABILITY ........................................................................................................ 30 11 EQUIPMENT LIST ....................…

Text truncated - open the document above for the full version.

FCC ID: BCG-A3584 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Appendix A Watch A P P E N D I X A : S A R T E S T P L O T S A1 ELEMENT DUT: BCG-A3584; Type: Watch; Serial: 447PQ Communication System: UID:10415 - AAA, WLAN; MAIA: Y; Frequency: 2412.0 MHz Medium: 2450 Head; Medium parameters used: f = 2412.0 MHz; cond = 1.82 S/m; perm = 38.5; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10.00 mm Test Date: 07/07/2026; Ambient Temp: 24.0°C; Tissue Temp: 23.2°C Probe: EX3DV4 - SN7551; ConvF:(6.86,6.94,7.06); Calibrated: 2026-03-10 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1323; Calibrated: 2026-03-10 Phantom: Twin-SAM V8.0; Serial: 2058 Measurement SW: DASY Module SAR V16.4.0.5005 Mode: 2.4 GHz WIFI/ IEEE 802.11b, 22 MHz Bandwidth, Exp: Head| Front Side, Ch. 1, 1Mbps Aluminum, Sport Wristband Area Scan (80.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 31.2): Measurement grid: dx=5.0 mm, dy=5.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Reference Value = 0.23 W/kg; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.500 W/kg SAR(1 g) = 0.276 W/kg Smallest distance from peaks to all points 3 dB below is 12.2 mm Ratio of SAR at M2 to SAR at M1 = 83.3 % A2 ELEMENT DUT: BCG-A3584; Type: Watch; Serial: 447PQ Communication System: UID:10415 - AAA, WLAN; MAIA: Y; Frequency: 2412.0 MHz Medium: 2450 Head; Medium parameters used: f = 2412.0 MHz; cond = 1.82 S/m; perm = 38.5; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0.00 mm Test Date: 07/07/2026; Ambient Temp: 24.0°C; Tissue Temp: 23.2°C Probe: EX3DV4 - SN7551; ConvF:(6.86,6.94,7.06); Calibrated: 2026-03-10 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1323; Calibrated: 2026-03-10 Phantom: Twin-SAM V8.0; Serial: 2058 Measurement SW: DASY Module SAR V16.4.0.5005 Mode: 2.4 GHz WIFI/ IEEE 802.11b, 22 MHz Bandwidth, Exp: Extremity| Back Side, Ch. 1, 1Mbps Aluminum, Metal Loop Wristband Area Scan (80.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 31.2): Measurement grid: dx=5.0 mm, dy=5.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Reference Value = 0.09 W/kg; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.234 W/kg SAR(10 g) = 0.037 W/kg Smallest distance from peaks to all points 3 dB below is 7.0 mm Ratio of SAR at M2 to SAR at M1 = 78.6 % A3 ELEMENT DUT: BCG-A3584; Type: Watch; Serial: 7H4T5 Communication System: UID:10417 - AAD, WLAN; MAIA: Y; Frequency: 5300.0 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5300.0 MHz; cond = 4.59 S/m; perm = 35.6; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10.00 mm Test Date: 06/19/2026; Ambient Temp: 19.1°C; Tissue Temp: 19.0°C Probe: EX3DV4 - SN7668; ConvF:(5.25,5.33,5.09); Calibrated: 2025-08-11 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1681; Calibrated: 2025-08-08 Phantom: Twin-SAM V8.0; Serial: 2027 Measurement SW: DASY Module SAR V16.4.0.5005 Mode: 5 GHz WIFI/ IEEE 802.11a, 20 MHz Bandwidth, U-NII-2A, Exp: Head| Front Side, Ch. 60, 6.0 Mbps Aluminum, Metal Loop Wristband Area Scan (80.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (32.0 x 32.0 x 22.9): Measurement grid: dx=4.0 mm, dy=4.0 mm, dz=1.4 mm; Graded Ratio: 1.4 Reference Value = 0.12 W/kg; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.570 W/kg SAR(1 g) = 0.158 W/kg Smallest distance from peaks to all points 3 dB below is 8.1 mm Ratio of SAR at M2 to SAR at M1 = 62.9 % A4 ELEMENT DUT: BCG-A3584; Type: Watch; Serial: 7H4T5 Communication System: UID:10417 - AAD, WLAN; MAIA: Y; Frequency: 5720.0 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5720.0 MHz; cond = 5.03 S/m; perm = 35.2; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0.00 mm Test Date: 06/14/2026; Ambient Temp: 19.0°C; Tissue Temp: 19.0°C Probe: EX3DV4 - SN7668; ConvF:(4.84,4.91,4.69); Calibrated: 2025-08-11 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1681; Calibrated: 2025-08-08 Phantom: Twin-SAM V8.0; Serial: 2027 Measurement SW: DASY Module SAR V16.4.0.5005 Mode: 5 GHz WIFI/ IEEE 802.11a, 20 MHz Bandwidth, U-NII-2C, Exp: Extremity| Back Side, Ch. 144, 6.0 Mbps Aluminum, Sport Wristband Area Scan (80.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.8 x 30.8 x 25.0): Measurement grid: dx=2.8 mm, dy=2.8 mm, dz=1.2 mm; Graded Ratio: 1.2 Reference Value = 0.06 W/kg; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.435 W/kg SAR(10 g) = 0.018 W/kg Smallest distance from peaks to all points 3 dB below is 4.9 mm Ratio of SAR at M2 to SAR at M1 = 69.7 % A5 ELEMENT DUT: BCG-A3584; Type: Watch; Serial: 447PQ Communication System: UID:10032 - CAA, Bluetooth; MAIA: Y; Frequency: 2402.0 MHz Medium: 2450 Head; Medium parameters used: f = 2402.0 MHz; cond = 1.81 S/m; perm = 38.3; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10.00 mm Test Date: 06/16/2026; Ambient Temp: 22.5°C; Tissue Temp: 23.1°C Probe: EX3DV4 - SN7551; ConvF:(6.86,6.94,7.06); Calibrated: 2026-03-10 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1323; Calibrated: 2026-03-10 Phantom: Twin-SAM V8.0; Serial: 2058 Measurement SW: DASY Module SAR V16.4.0.5005 Mode: 2.4 GHz Bluetooth, Exp: Head| Front Side, Ch. 0, 1 Mbps Aluminum, Sport Wristband Area Scan (80.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 31.2): Measurement grid: dx=5.0 mm, dy=5.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Reference Value = 0.18 W/kg; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.378 W/kg SAR(1 g) = 0.212 W/kg Smallest distance from peaks to all points 3 dB below is 11.8 mm Ratio of SAR at M2 to SAR at M1 = 83.6 % A6 ELEMENT DUT: BCG-A3584; Type: Watch; Serial: 447PQ Communication System: UID:10032 - CAA, Bluetooth; MAIA: Y; Frequency: 2402.0 MHz Medium: 2450 Head; Medium parameters used: f = 2402.0 MHz; cond = 1.81 S/m; perm = 38.3; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0.00 mm Tes…

Text truncated - open the document above for the full version.

FCC ID: BCG-A3584 RF EXPOSURE REPORT Approved by: Technical Manager DUT Type: This report is Blockchain Verified. To verify the report authenticity, please visit https://www.blockchain-verified.com or by clicking on the Blockchain logo. Appendix B Watch A P P E N D I X B : S A R D I P O L E V E R I F I C A T I O N P L O T S B1 ELEMENT DUT: Dipole 13.0 MHz; Type: CLA13 - SN1004 Communication System: UID: 0, CW; Frequency: 13.0 MHz Medium: 30 Head; Medium parameters used: f = 13.0 MHz; cond = 0.752 S/m; perm = 53.5; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0 mm Test Date: 07/08/2026; Ambient Temp: 21.1°C; Tissue Temp: 24.6°C Probe: EX3DV4 - SN7782; ConvF:(18.49,15.42,16.82); Calibrated: 2025-09-15 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1646; Calibrated: 2025-09-10 Phantom: ELI V6.0; Serial: 2044 Measurement SW: DASY Module SAR V16.4.0.5005 13.0 MHz System Verification at 30.0 dBm (1000 mW) Area Scan (40.0 x 90.0): Measurement grid: dx=10.0 mm, dy=15.0 mm Zoom Scan (30.0 x 30.0 x 31.2): Measurement grid: dx=6.0 mm, dy=6.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Peak SAR (extrapolated) = 1.11 W/kg SAR(1 g) = 0.544 W/kg; SAR(10 g) = 0.334 W/kg Deviation (1 g) = -7.01%; Deviation (10 g) = -6.70% B2 ELEMENT DUT: Dipole 2450.0 MHz; Type: D2450V2 - SN855 Communication System: UID: 0, CW; Frequency: 2450.0 MHz Medium: 2450 Head; Medium parameters used: f = 2450.0 MHz; cond = 1.86 S/m; perm = 38.2; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 06/16/2026; Ambient Temp: 22.5°C; Tissue Temp: 23.1°C Probe: EX3DV4 - SN7551; ConvF:(6.86,6.94,7.06); Calibrated: 2026-03-10 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1323; Calibrated: 2026-03-10 Phantom: Twin-SAM V8.0; Serial: 2058 Measurement SW: DASY Module SAR V16.4.0.5005 2450.0 MHz System Verification at 20.0 dBm (100 mW) Area Scan (40.0 x 80.0): Measurement grid: dx=10.0 mm, dy…

Text truncated - open the document above for the full version.