BCG-E8666ASMARTPHONE

Apple Park, Cupertino, CA 95014 April 22, 2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: Apple Inc. (“Apple”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A Apple Park, Cupertino, CA 95014 Apple certifies that, as of the date of the filing of the application, the Apple is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

Apple Park, Cupertino, CA 95014 July 1, 2024 Federal Communications Commissions Authorization a nd Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: BCG To whom it may concern: Apple Inc. (“Apple”) as required by s ection §2.911(d)(7), will also s erve as th e a gent for servi ce of process fo r the above referenced grantee code. Apple acknowledges that it will maintain an agent for no less than one year after the Apple has terminated all m arketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Apple further acknowledges its responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Contact person: Abhishek Rala Company name: Apple Inc. FCC FRN: 0005899216 Company Address: One Apple Park Way, Cupertino, CA 95014 Email: [email protected] Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: April 21, 2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046d Attn: Equipment Authorization Branch Ref: FCC ID numbers To whom it may concern: I, the undersigned, hereby authorize UL to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com matters. Any and all acts carried out by UL on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: April 22, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID numbers To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Long-Term Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams. • Electrical Schematic Diagrams. • Technical Descriptions, Product Specifications. • Antenna Locations. • Tune-up Procedure. • Software Security Description. These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Short-Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 1 of 4 www.apple.com FCC E-Label Information Models A3083, A3292, A3293, A3294 A. Information to be displayed 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information on E-label In Manual FCC ID number Yes No SDoC logo Yes No 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class A / B Digital Device user manual statements 1 No Yes DoC declaration 1 No Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 1 No Yes Describe any other FCC regulatory information included in e-label 1 1 If the e-label includes information typically included in the manual then the e-label shall clearly differentiate between information required to be on the device's surface and information required to be in the manual refer to KDB 784748 D02 e labelling v0201. Images of the e-label screen are provided below: Model A3083: v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 2 of 4 www.apple.com Model A3292: Model A3293: Model A3294: v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 3 of 4 www.apple.com B. Access to the required information on the e-label 1. Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: To access the e-label information, in the device, Choose: Settings > General >Legal & Regulatory No special access codes or permissions are required to go through the above steps beyond entering a user- defined password to protect against unauthorized access to the device. 2. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. Yes 3. Users are provided specific instructions on how to access the information. The information to the user is provided in the iPhone Info document. C. Labeling for Importation and Purchasing 1. Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 4 of 4 www.apple.com customer after purchase. For devices imported already in individual packages ready for sale, the information may alternatively be provided on the package. It shall contain: 1. The FCC ID and/or the DoC logo (if applicable); and 2. Any other information required by specific rule to be provided on the surface of the product unless such information is permitted to be included in the User’s manual or other packaging inserts. The FCC ID and DoC logo are present on the product packaging. Model number is present in the charging slot.. D. Other considerations 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. 2. All the applicable regulatory information required on the packaging or user instructions must be provided according to the rules even if it is displayed electronically. For example, hearing aid compatibility (HAC) ratings for the phones as specified in 47 C.F.R. § 20.19. Yes, it is provided

Plot No. 1 UL Verification Services Inc. SAR Lab A Date/Time: 2024-06-03, 21:29 System Performance Check Report for D2300V2 - SN1058 Exposure Conditions Frequency [MHz] | Channel Number 2300.000 | 0 TSL Permittivity 38.0 Group | UID CW | 0-- TSL Conductivity [S/m] 1.57 Conversion Factor 6.54 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3686 | 2024-01-12 Phantom Twin-SAM V4.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1547 | 2024-04-10 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 81.0 Dist 3dB Peak [mm] 9.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 5.19 5.24 psSAR10g [W/Kg] 2.46 2.57 Power Drift [dB] N/A 0.01 Plot No. 2 UL Verification Services Inc. SAR Lab A Date/Time: 2024-06-12, 07:23 System Performance Check Report for D2600V2 - SN1006 Exposure Conditions Frequency [MHz] | Channel Number 2600.000 | 0 TSL Permittivity 41.1 Group | UID CW | 0-- TSL Conductivity [S/m] 1.89 Conversion Factor 6.46 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3686 | 2024-01-12 Phantom Twin-SAM V4.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1547 | 2024-04-10 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 79.4 Dist 3dB Peak [mm] 9.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 5.03 5.09 psSAR10g [W/Kg] 2.23 2.30 Power Drift [dB] N/A -0.09 Plot No. 3 UL Verification Services Inc. SAR Lab B Date/Time: 2024-05-27, 21:06 System Performance Check Report for D2300V2 - SN1058 Exposure Conditions Frequency [MHz] | Channel Number 2300.000 | 0 TSL Permittivity 39.9 Group | UID CW | 0-- TSL Conductivity [S/m] 1.74 Conversion Factor 7.82 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3885 | 2023-10-12 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1359 | 2024-01-16 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 78.1 Dist 3dB Peak [mm] 9.1 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 1.55 1.63 psSAR10g [W/Kg] 0.757 0.780 Power Drift [dB] N/A 0.01 Plot No. 4 UL Verification Services Inc. SAR Lab B Date/Time: 2024-06-26, 03:34 System Performance Check Report for D2600V2 - SN1006 Exposure Conditions Frequency [MHz] | Channel Number 2600.000 | 0 TSL Permittivity 41.4 Group | UID CW | 0-- TSL Conductivity [S/m] 1.94 Conversion Factor 7.64 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3885 | 2023-10-12 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1359 | 2024-01-16 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 77.4 Dist 3dB Peak [mm] 9.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 4.81 5.12 psSAR10g [W/Kg] 2.23 2.30 Power Drift [dB] N/A 0.00 Plot No. 5 UL Verification Services Inc. SAR Lab B Date/Time: 2024-07-01, 15:30 System Performance Check Report for D2600V2 - SN1036 Exposure Conditions Frequency [MHz] | Channel Number 2600.000 | 0 TSL Permittivity 40.5 Group | UID CW | 0-- TSL Conductivity [S/m] 1.94 Conversion Factor 7.64 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3885 | 2023-10-12 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1359 | 2024-01-16 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 77.7 Dist 3dB Peak [mm] 9.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 1.81 1.83 psSAR10g [W/Kg] 0.809 0.823 Power Drift [dB] N/A 0.00 Plot No. 6 UL Verification Services Inc. SAR Lab E Date/Time: 2024-05-25, 09:38 System Performance Check Report for D3700V2 - SN1110 Exposure Conditions Frequency [MHz] | Channel Number 3700.000 | 0 TSL Permittivity 38.3 Group | UID CW | 0-- TSL Conductivity [S/m] 3.27 Conversion Factor 6.99 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN7356 | 2024-03-14 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1259 | 2023-09-06 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 28.0 x 28.0 x 28.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 72.8 Dist 3dB Peak [mm] 8.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 5.94 6.64 psSAR10g [W/Kg] 2.30 2.43 Power Drift [dB] N/A -0.03 Plot No. 7 UL Verification Services Inc. SAR Lab E Date/Time: 2024-05-28, 00:51 System Performance Check Report for D3500V2 - SN1060 Exposure Conditions Frequency [MHz] | Channel Number 3500.000 | 0 TSL Permittivity 35.8 Group | UID CW | 0-- TSL Conductivity [S/m] 3.03 Conversion Factor 6.91 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN7356 | 2024-03-14 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1259 | 2023-09-06 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 28.0 x 28.0 x 28.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 75.8 Dist 3dB Peak [mm] 8.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 6…

Text truncated - open the document above for the full version.

Plot No. 1 UL Verification Services Inc. SAR Lab 14 Date/Time: 2024-05-30, 20:14 GSM 850: GPRS-FDD (TDMA, GMSK, TN 0-1), CHEEK Exposure Conditions Band GSM 850 TSL Permittivity 41.0 Frequency [MHz] | Channel Number 836.600 | 190 TSL Conductivity [S/m] 0.912 Group | UID GSM | 10024-DAC Phantom Section | TSL RightHead | HSL Conversion Factor 9.5 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7589 | 2024-04-15 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1434 | 2023-06-13 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 180.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 81.4 Dist 3dB Peak [mm] 9.7 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 0.723 | [13.8, -328.6, -174.0] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.417 0.398 psSAR10g [W/Kg] 0.285 0.238 Power Drift [dB] N/A -0.01 Plot No. 2 UL Verification Services Inc. SAR Lab 14 Date/Time: 2024-05-29, 14:30 GSM 850: GPRS-FDD (TDMA, GMSK, TN 0-1), BACK Exposure Conditions Band GSM 850 TSL Permittivity 39.1 Frequency [MHz] | Channel Number 836.600 | 190 TSL Conductivity [S/m] 0.898 Group | UID GSM | 10024-DAC Phantom Section | TSL Flat | HSL Conversion Factor 9.5 Test Distance [mm] 5.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7589 | 2024-04-15 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1434 | 2023-06-13 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 180.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 88.7 Dist 3dB Peak [mm] 12.1 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 0.672 | [-33.5, -68.3, -207.0] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.427 0.431 psSAR10g [W/Kg] 0.287 0.276 Power Drift [dB] N/A -0.09 Plot No. 3 UL Verification Services Inc. SAR Lab 14 Date/Time: 2024-05-31, 06:47 GSM 850: GPRS-FDD (TDMA, GMSK, TN 0-1), EDGE RIGHT Exposure Conditions Band GSM 850 TSL Permittivity 41.0 Frequency [MHz] | Channel Number 836.600 | 190 TSL Conductivity [S/m] 0.912 Group | UID GSM | 10024-DAC Phantom Section | TSL Flat | HSL Conversion Factor 9.5 Test Distance [mm] 5.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7589 | 2024-04-15 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1434 | 2023-06-13 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 48.6 x 180.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 8.1 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 86.5 Dist 3dB Peak [mm] 18.0 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 0.919 | [-31.3, -10.3, -207.0] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.640 0.580 psSAR10g [W/Kg] 0.418 0.376 Power Drift [dB] N/A -0.09 Plot No. 4 UL Verification Services Inc. SAR Lab 17 Date/Time: 2024-06-20, 22:24 PCS 1900: GPRS-FDD (TDMA, GMSK, TN 0-1), CHEEK Exposure Conditions Band PCS 1900 TSL Permittivity 39.8 Frequency [MHz] | Channel Number 1909.800 | 810 TSL Conductivity [S/m] 1.46 Group | UID GSM | 10024-DAC Phantom Section | TSL LeftHead | HSL Conversion Factor 7.55 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7448 | 2024-02-07 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1784 | 2024-05-02 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 5.4 x 5.4 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 78.4 Dist 3dB Peak [mm] 7.0 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 1.62 | [32.5, 336.5, -176.4] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.689 0.776 psSAR10g [W/Kg] 0.406 0.403 Power Drift [dB] N/A -0.01 Plot No. 5 UL Verification Services Inc. SAR Lab 13 Date/Time: 2024-05-31, 14:30 PCS 1900: GPRS-FDD (TDMA, GMSK, TN 0-1), BACK Exposure Conditions Band PCS 1900 TSL Permittivity 41.6 Frequency [MHz] | Channel Number 1880.000 | 661 TSL Conductivity [S/m] 1.37 Group | UID GSM | 10024-DAC Phantom Section | TSL Flat | HSL Conversion Factor 7.98 Test Distance [mm] 5.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7569 | 2024-04-15 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1545 | 2024-02-09 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 180.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 78.4 Dist 3dB Peak [mm] 11.1 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 1.20 | [-45.6, 69.6, -210.1] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.550 0.585 psSAR10g [W/Kg] 0.315 0.297 Power Drift [dB] N/A -0.07 Plot No. 6 UL Verification Services Inc. SAR Lab 17 Date/Time: 2024-06-07, 21:23 PCS 1900: GPRS-FDD (TDMA, GMSK, TN 0-1), EDGE LEFT Exposure Conditions Band PCS 1900 TSL Permittivity 40.7 Frequency [MHz] | Channel Number 1909.800 | 810 TSL Conductivity [S/m] 1.46 Group | UID GSM | 10024-DAC Phantom Section | TSL Flat | HSL Conversion Factor 7.55 Test Distance [mm] 5.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7448 | 2024-02-07 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1784 | 2024-05-02 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 52.0 x 180.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 8.66 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 82.3 Dist 3dB Peak [mm] 8.8 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 1.27 | [-29.6, -52.1, -207.0] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.624 0.659 psSAR10g [W/Kg] 0.329 0.327 Power Drift [dB] N/A -0.07 Plot No. 7 UL Verification Services Inc. SAR Lab 18 Date/Time: 2…

Text truncated - open the document above for the full version.

Head Tissue Simulating Liquids Application Specific absorption rate according to standards (e.g., IEC 62209-x, IEEE 1528) Packaging Plastic container of 10 liters with nozzle Life Time Life time and stability of the liquid depend on usage, storage, and handling of tissue simulating liquid Options Tissue simulating liquids for frequencies outside the below listed ranges are available upon request (please contact [email protected]) Head Tissue Parameters according to IEEE 1528 / IEC 62209-1/ IEC 62209-2 / FCC KDB 865664 Narrow- Band Solutions (±5% Tolerance) Product HSL300V2 HSL450V2 HSL750V2 HSL900V2 Test Frequency (MHz) 300 450 750 835, 900 Main Ingredients Water, Sugar Water, Sugar Water, Sugar Water, Sugar Broad- Band Solutions (±5% Tolerance) Product HBBL1350-1850V3 HBBL1550-1950V3 HBBL1900-3800V3 HBBL3500-5800V5 Test Frequency (MHz) 1450 – 1800 1750 – 1850 1950 – 3000 3500 – 5800 Main Ingredients Water, Tween Water, Tween Water, Tween Water, Oil Broad- Band Solutions (±10% Tolerance) Product HBBL4-250V3 HBBL1350-1850V3 HBBL1550-1950V3 HBBL1900-3800V3 HBBL600-10000V6 Test Frequency (MHz) 4 – 250 1300 – 1850 1550 – 1950 1900 – 3800 600 – 10000 Main Ingredients Water, Tween Water, Tween Water, Tween Water, Tween Water, Oil

Calibration Laboratory of Schmid & Partner Engineering AG Zeughausslrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one ol the signatories to the EA Multilateral Agreement for the recognition of calibration certlllcates Client UL Fremont, USA S Schweizerischer Kalibrierdienst ". Service suisse d'6talonnage v Servizio svizzero di taratura S Swiss Calibration Service Accreditation tto.: SCS 0108 EX-7810_May24Gertilicate No. CALI B RATION CERTI FICATE ObjectEX3DV4 - SN:7810 Calibration procedure(s) QA CAL-01.v10, QA CAL-12.v10, QA CAL-14.v7, QA CAL-23.v6, QA CAL-25.v8 Calibration procedure for dosimetric E-field probes Calibration date May Q8,2024 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)t and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary StandardsID Cal Date (Certificate No.)Scheduled Calibration Power meter NRP2 SN:10477826-Mar -24 (No. 21 7-040361 04037 ) Mar-25 Power sensor NRP-291 SN:103244 26-Mar-24 No.217-04036Mar-25 OCP DAK-3.5 (weiqhted) SN:1249 05-Oct-23 (OGP-DAK3.5-1 249_Oct23) Ocl-24 OCP DAK.12 SN:1016 05-Oct-23 (OCP-DAK1 2-1 0 1 6_Oct23) Oct-24 Reference 20 dB Attenuator SN: CC2552 (20x) 26-Mar-24 (No. 21 7-04046) Mar-25 DAE4 SN:660 23-Feb-24 (No. DAE4-660 Feb24) Feb-25 Reference Probe EX3DV4 SN: 734903-Nov-23No. EX3-7349\ov23)Nov-24 Secondary Standards ID Check Date (in house)Scheduled Check Power meter E44198 SN: G84129387406-Apr-16 (in house check Jun-22) ln house check: Jun-24 Power sensor E44124 SN: MY41498087 06-Apr-16 (in house check Jun-22) ln house check: Jun-24 Power sensor E4412ASN: 0001 1 0210 06-Apr16 in house check Jun-22ln house check: Jun-24 RF generator HP 8648CSN: US3642U01700 04-Au0-99 n house check Jun-22 ln house check: Jun-24 Network Analyzer EB358A SN: US41080477 31 -Mar-14 (in house check Oct-22) ln house check: Oct-24 Name Joanna Lleshaj Function Laboratory Technician Signature Calibrated by ffi(///g 54-- Approved by Sven K0hnTechnical Manager lssued: May 08,2024 This calibration certificate shall not be reproduced except in tull without written approval of the laboratory. Certif icate No: EX-781 0_May24 Page 1 ol 22 Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition ol calibration certificates S c S Schweizerischer Kal ibrierd ienst Service suisse d'6talonnage Servizio svizzero di taratura Swiss Calibration Service Accreditation ruo.: SCS 0108 Glossary TSL NORMx,y,z ConvF DCP CF A,B,C,D Polarization rp Polarization I tissue simulating liquid sensitivity in free space sensitivity in TSL / NORMx,y,z diode compression point crest factor (1/duty_cycle) of the RF signal modulation dependent linearization parameters g rotation around probe axis 0 rotation around an axis that is in the plane normal to probe axis (at measurement center), i.e., I = 0 is normal to probe axis information used in DASY system to align probe sensor X to the robot coordinate system Connector Angle Calibration is Performed According to the Following Standards: a) IEC/IEEE 62209-1528, "Measurement Procedure For The Assessment Of Specific Absorption Rate Of Human Exposure To Radio Frequency Fields From Hand-Held And Body-Worn Wireless Communication Devices - Part 1528: Human Models, lnstrumentation And Procedures (Frequency Range of 4 MHz to 10 GHz)", October 2020. b) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and lnterpretation of Parameters: . NORMx,y,z: Assessed for E-field p…

Text truncated - open the document above for the full version.