BCG-E8694ASMARTPHONE

Apple Park, Cupertino, CA 95014 April 22, 2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: Apple Inc. (“Apple”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A Apple Park, Cupertino, CA 95014 Apple certifies that, as of the date of the filing of the application, the Apple is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

Apple Park, Cupertino, CA 95014 July 1, 2024 Federal Communications Commissions Authorization a nd Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: BCG To whom it may concern: Apple Inc. (“Apple”) as required by s ection §2.911(d)(7), will also s erve as th e a gent for servi ce of process fo r the above referenced grantee code. Apple acknowledges that it will maintain an agent for no less than one year after the Apple has terminated all m arketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Apple further acknowledges its responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Contact person: Abhishek Rala Company name: Apple Inc. FCC FRN: 0005899216 Company Address: One Apple Park Way, Cupertino, CA 95014 Email: [email protected] Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: April 21, 2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046d Attn: Equipment Authorization Branch Ref: FCC ID numbers To whom it may concern: I, the undersigned, hereby authorize UL to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com matters. Any and all acts carried out by UL on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: April 22, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID numbers To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Long-Term Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams. • Electrical Schematic Diagrams. • Technical Descriptions, Product Specifications. • Antenna Locations. • Tune-up Procedure. • Software Security Description. These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Short-Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 1 of 4 www.apple.com FCC E-Label Information Models A3082, A3289, A3290, A3291 A. Information to be displayed 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information on E-label In Manual FCC ID number Yes No SDoC logo Yes No 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class A / B Digital Device user manual statements 1 No Yes DoC declaration 1 No Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 1 No Yes Describe any other FCC regulatory information included in e-label 1 1 If the e-label includes information typically included in the manual then the e-label shall clearly differentiate between information required to be on the device's surface and information required to be in the manual refer to KDB 784748 D02 e labelling v0201. Images of the e-label screen are provided below: Model A3082: v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 2 of 4 www.apple.com Model A3289: Model A3290: Model A3291: v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 3 of 4 www.apple.com B. Access to the required information on the e-label 1. Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: To access the e-label information, in the device, Choose: Settings > General >Legal & Regulatory No special access codes or permissions are required to go through the above steps beyond entering a user- defined password to protect against unauthorized access to the device. 2. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. Yes 3. Users are provided specific instructions on how to access the information. The information to the user is provided in the iPhone Info document. C. Labeling for Importation and Purchasing 1. Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. For devices imported already in individual packages ready for sale, the information may alternatively be provided on the package. It shall contain: v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 4 of 4 www.apple.com 1. The FCC ID and/or the DoC logo (if applicable); and 2. Any other information required by specific rule to be provided on the surface of the product unless such information is permitted to be included in the User’s manual or other packaging inserts. The FCC ID and DoC logo are present on the product packaging. Model number is present in the charging slot.. D. Other considerations 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. 2. All the applicable regulatory information required on the packaging or user instructions must be provided according to the rules even if it is displayed electronically. For example, hearing aid compatibility (HAC) ratings for the phones as specified in 47 C.F.R. § 20.19. Yes, it is provided

SAR EVALUATION REPORT IEEE Std 1528-2013 For SMARTPHONE FCC ID: BCG-E8692A Model Name: A3082 Report Number: 14982489-S8V1 Issue Date: 8/8/2024 Prepared for APPLE INC. 1 APPLE PARK WAY CUPERTINO, CA 95014-2084 Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 Report No.: 14982489-S8V1 Issue Date: 8/7/2024 Page 2 of 19 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Revision History Rev. Date Revisions Revised By V1 8/7/2024 Initial Issue -- Report No.: 14982489-S8V1 Issue Date: 8/7/2024 Page 3 of 19 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Table of Contents 1. Attestation of Test Results ......................................................................................................... 4 2. Test Specification, Methods and Procedures ............................................................................ 5 3. Facilities and Accreditation ........................................................................................................ 6 4. SAR Measurement System & Test Equipment .......................................................................... 7 4.1. SAR Measurement System ........................................................................................................ 7 4.2. SAR Scan Procedures ............................................................................................................... 8 4.3. PD Measurement Procedures .................................................................................................. 10 4.3.1. System Verification Scan Procedures ............................................................................... 10 4.3.2. Scan Procedures .............................................................................................................. 10 4.4. Test Equipment ........................................................................................................................ 11 5. Measurement Uncertainty ......................................................................................................... 14 6. Dielectric Property Measurements & System Check .............................................................. 15 6.1. SAR Dielectric Property Measurements and System Checks ................................................... 15 6.2. Power Density Measurement System Validation & System Check ........................................... 17 7. Test Results ............................................................................................................................... 18 7.1. Measured and Reported (Scaled) SAR Results ....................................................................... 18 7.2. Measured and Reported (Scaled) PD Results.......................................................................... 18 Appendixes .......................................................................................................................................... 19 Appendix A: Setup Photos ................................................................................................................. 19 Appendix B: System Check Plots ....................................................................................................... 19 Appendix C: Highest Test Plots .......................................................................................................... 19 Appendix D: SAR Tissue Ingredients .................................................................................................. 19 Appendix E: Probe Certificates ........................................................................................................... 19 Appendix F: Dipole & 5G Source Certificates ..................................................................................... 19 Report No.: 14982489-S8V1 Issue Date: 8/7/2024 Page 4 of 19 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. 1. Attestation of Test Results Applicant Name APPLE INC. FCC ID BCG-E8692A Model Name A3082 Applicable Standards Published RF exposure KDB procedures IEEE Std 1528-2013 7/29/2024 to 8/6/2024 Test Results Pass This test report is supplemental to UL SAR report 14982489-S1 and UL Smart Tx report 14982489-S5 Part 1. This report contains SAR and PD test results obtained while the DUT was transmitting with a MagSafe compatible battery pack (FCC ID: BCG-A2384) attached to the DUT. Refer to § 7 for a description of the modes tested as well as Standalone SAR and PD test results from UL SAR report 14982489-S1 and UL Smart Tx report 14982489-S5 Part 1 UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested can demonstrate compliance with the requirements as documented in this report. This report contains data provided by the customer which can impact the validity of results. UL Verification Services Inc. is only responsible for the validity of results after the integration of the data provided by the customer. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not considered unless noted otherwise. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions…

Text truncated - open the document above for the full version.

Plot No. 1 UL Verification Services Inc. SAR Lab G Date/Time: 2024-07-29, 12:01 System Performance Check Report for D2300V2 - SN1002 Exposure Conditions Frequency [MHz] | Channel Number 2300.000 | 0 TSL Permittivity 38.2 Group | UID CW | 0-- TSL Conductivity [S/m] 1.70 Conversion Factor 7.98 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3991 | 2023-10-12 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1380 | 2024-02-09 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 79.4 Dist 3dB Peak [mm] 9.9 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 4.93 5.01 psSAR10g [W/Kg] 2.40 2.43 Power Drift [dB] N/A 0.00 Plot No. 2 UL Verification Services Inc. SAR Lab 1 Date/Time: 2024-07-30, 12:47 System Performance Check Report for D5GHzV2 - SN1168 Exposure Conditions Frequency [MHz] | Channel Number 5250.000 | 0 TSL Permittivity 34.9 Group | UID CW | 0-- TSL Conductivity [S/m] 4.57 Conversion Factor 5.19 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3772 | 2024-02-07 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1258 | 2024-03-12 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 65.5 Dist 3dB Peak [mm] 7.2 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 7.12 8.16 psSAR10g [W/Kg] 2.14 2.37 Power Drift [dB] 0.04 0.02 Plot No. 3 UL Verification Services Inc. SAR Lab 1 Date/Time: 2024-07-30, 12:22 System Performance Check Report for D5GHzV2 - SN1168 Exposure Conditions Frequency [MHz] | Channel Number 5750.000 | 0 TSL Permittivity 33.8 Group | UID CW | 0-- TSL Conductivity [S/m] 5.14 Conversion Factor 4.63 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3772 | 2024-02-07 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1258 | 2024-03-12 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 61.0 Dist 3dB Peak [mm] 7.2 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 6.94 7.80 psSAR10g [W/Kg] 2.06 2.26 Power Drift [dB] -0.02 -0.04 Plot No. 4 UL Verification Services Inc. SAR Lab 8 Date/Time: 2024-07-30, 14:01 System Performance Check Report for D6.5GHzV2 - SN1033 Exposure Conditions Frequency [MHz] | Channel Number 6500.000 | 0 TSL Permittivity 33.6 Group | UID CW | 0-- TSL Conductivity [S/m] 6.42 Conversion Factor 5.1 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN7810 | 2024-05-08 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1787 | 2024-05-02 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 51.0 x 85.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 8.5 x 8.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 50.2 Dist 3dB Peak [mm] 4.8 Measurement Results Area Scan Zoom Scan APD psSAR1g [W/Kg] 19.9 24.5 N/A psSAR8g [W/Kg] 4.56 5.44 N/A psSAR10g [W/Kg] 3.78 4.47 N/A psAPD (4.0cm 2 , sq.) [W/m 2 ] N/A N/A 109 Power Drift [dB] N/A 0.08 N/A Plot No. 5 UL Verification Services Inc. SAR Lab 10 Date/Time: 2024-08-06, 14:40 System Performance Check Report for D3500V2 - SN1060 Exposure Conditions Frequency [MHz] | Channel Number 3500.000 | 0 TSL Permittivity 38.7 Group | UID CW | 0-- TSL Conductivity [S/m] 2.75 Conversion Factor 6.19 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN7463 | 2024-04-15 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1548 | 2024-02-08 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 28.0 x 28.0 x 28.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 75.0 Dist 3dB Peak [mm] 8.3 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 6.24 6.46 psSAR10g [W/Kg] 2.43 2.51 Power Drift [dB] N/A -0.01 Plot No. 6 UL Verification Services Inc. SAR Lab 19 Date/Time: 2024-07-29, 11:34 System Performance Check Report for D1750V2 - SN1053 Exposure Conditions Frequency [MHz] | Channel Number 1750.000 | 0 TSL Permittivity 40.2 Group | UID CW | 0-- TSL Conductivity [S/m] 1.37 Conversion Factor 7.83 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3749 | 2024-01-11 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1674 | 2024-05-13 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 81.2 Dist 3dB Peak [mm] 10.8 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.882 0.885 psSAR10g [W/Kg] 0.473 0.472 Power Drift [dB] -0.00 0.01 Plot No. 7 UL Verification Services Inc. SAR Lab 19 Date/Time: 2024-07-29, 11:54 System Performance Check Report for D1900V2 - SN5d140 Exposure Conditions Frequency [MHz] | Channel Number 1900.000 | 0 TSL Permittivity 40.0 Group | UID CW | 0-- TSL Conductivity [S/m] 1.45 Conversion Factor 7.67 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3749 | 2024-01-11 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1674 | 2024-05-13 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Y…

Text truncated - open the document above for the full version.

Plot No. 1 UL Verification Services Inc. SAR Lab 19 Date/Time: 2024-07-30, 21:11 PCS 1900: GPRS-FDD (TDMA, GMSK, TN 0-1), CHEEK Exposure Conditions Band PCS 1900 TSL Permittivity 40.0 Frequency [MHz] | Channel Number 1880.000 | 661 TSL Conductivity [S/m] 1.44 Group | UID GSM | 10024-DAC Phantom Section | TSL RightHead | HSL Conversion Factor 7.67 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN3749 | 2024-01-11 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1674 | 2024-05-13 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 74.6 Dist 3dB Peak [mm] 8.6 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 0.826 | [25.2, -337.6, -174.1] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.406 0.367 psSAR10g [W/Kg] 0.240 0.207 Power Drift [dB] 0.02 -0.03 Plot No. 2 UL Verification Services Inc. SAR Lab 19 Date/Time: 2024-07-30, 19:31 Band 4: UMTS-FDD (WCDMA), TILT Exposure Conditions Band Band 4 TSL Permittivity 40.3 Frequency [MHz] | Channel Number 1712.400 | 1312 TSL Conductivity [S/m] 1.35 Group | UID WCDMA | 10011-CAC Phantom Section | TSL RightHead | HSL Conversion Factor 7.83 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN3749 | 2024-01-11 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1674 | 2024-05-13 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 4.6 x 4.6 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 79.6 Dist 3dB Peak [mm] 7.1 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 1.66 | [7.2, -319.2, -173.5] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.515 0.741 psSAR10g [W/Kg] 0.284 0.338 Power Drift [dB] -0.34 -0.03 Plot No. 3 UL Verification Services Inc. SAR Lab G Date/Time: 2024-07-31, 17:52 Band 30: LTE-FDD (SC-FDMA, 1 RB, 10 MHz, QPSK) RBPosition:Mid AntennaCfg:SISO, CHEEK Exposure Conditions Band Band 30 TSL Permittivity 38.2 Frequency [MHz] | Channel Number 2310.000 | 27710 TSL Conductivity [S/m] 1.71 Group | UID LTE-FDD | 10175-CAH Phantom Section | TSL RightHead | HSL Conversion Factor 7.98 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN3991 | 2023-10-12 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1380 | 2024-02-09 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 200.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 74.6 Dist 3dB Peak [mm] 5.7 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 1.58 | [28.0, -339.4, -174.0] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.594 0.638 psSAR10g [W/Kg] 0.301 0.287 Power Drift [dB] N/A -0.01 Plot No. 4 UL Verification Services Inc. SAR Lab 10 Date/Time: 2024-08-06, 15:39 Band n48: 5G NR (DFT-s-OFDM, 50% RB, 40 MHz, QPSK, 30 kHz) RBPosition:Mid AntennaCfg:SISO, CHEEK Exposure Conditions Band Band n48 TSL Permittivity 38.5 Frequency [MHz] | Channel Number 3643.345 | 642890 TSL Conductivity [S/m] 2.89 Group | UID 5G NR FR1 TDD | 10913-AAD Phantom Section | TSL LeftHead | HSL Conversion Factor 6.14 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7463 | 2024-04-15 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1548 | 2024-02-08 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 200.0 28.0 x 28.0 x 28.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 73.1 Dist 3dB Peak [mm] 6.4 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 2.30 | [31.7, 331.6, -174.7] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.859 0.850 psSAR10g [W/Kg] 0.326 0.322 Power Drift [dB] N/A 0.05 Plot No. 5 UL Verification Services Inc. SAR Lab 1 Date/Time: 2024-08-01, 13:25 WLAN 2.4GHz: IEEE 802.11b WiFi 2.4 GHz (DSSS, 1 Mbps, 99pc duty cycle), CHEEK Exposure Conditions Band WLAN 2.4GHz TSL Permittivity 39.5 Frequency [MHz] | Channel Number 2462.000 | 11 TSL Conductivity [S/m] 1.74 Group | UID WLAN | 10415-AAA Phantom Section | TSL LeftHead | HSL Conversion Factor 7.18 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN3772 | 2024-02-07 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1258 | 2024-03-12 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 200.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 4.6 x 4.6 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 75.3 Dist 3dB Peak [mm] 5.6 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 1.90 | [47.9, 333.7, -173.6] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.680 0.772 psSAR10g [W/Kg] 0.341 0.337 Power Drift [dB] -0.01 -0.01 Plot No. 6 UL Verification Services Inc. SAR Lab 1 Date/Time: 2024-08-01, 14:05 WLAN 5GHz: IEEE 802.11ac WiFi (80MHz, MCS0, 99pc duty cycle), TILT Exposure Conditions Band WLAN 5GHz TSL P…

Text truncated - open the document above for the full version.