BCG-E8695ASMARTPHONE

Apple Park, Cupertino, CA 95014 April 22, 2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: Apple Inc. (“Apple”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A Apple Park, Cupertino, CA 95014 Apple certifies that, as of the date of the filing of the application, the Apple is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

Apple Park, Cupertino, CA 95014 July 1, 2024 Federal Communications Commissions Authorization a nd Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: BCG To whom it may concern: Apple Inc. (“Apple”) as required by s ection §2.911(d)(7), will also s erve as th e a gent for servi ce of process fo r the above referenced grantee code. Apple acknowledges that it will maintain an agent for no less than one year after the Apple has terminated all m arketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Apple further acknowledges its responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Contact person: Abhishek Rala Company name: Apple Inc. FCC FRN: 0005899216 Company Address: One Apple Park Way, Cupertino, CA 95014 Email: [email protected] Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

 v2.0 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: September 3 rd , 2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046d Attn: OET Department To whom it may concern: We, Apple Inc., attest that these devices under FCC ID: complies with the following Very Low Power 6VL protocols and restrictions: 1. Device Protocol Attestation Statement: a. This device will prioritize spectrum above 6.105 GHz. Channels below 6105 MHz are disabled. The device will not transmit on channels below 6105 MHz. b. This device employs a link-budget-based Transmit Power Control (TPC) mechanism. The TPC mechanism triggers in an environment where received signal strength (RSSI) is above a predetermined threshold . Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A  v2.0 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com 2. Device Operating Restrictions: a. This device is prohibited for control of or communication with unmanned aircraft systems, including drones. b. Operation of this device is prohibited on oil platforms and aircraft, except that operation in the 5.925-6.425 GHz band is permitted in large aircraft flying above 10,000 feet. Sincerely, Abhishek Rala Apple Inc. Global Certification Manager [email protected]

 Date: August 19, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Office of Engineering and Technology HAC Attestation - FCC ID: BCG-E8666A, BCG-E8667A, BCG-E8668A, BCG-E8683A, BCG-E8684A, BCG-E8685A, BCG-E8686A, BCG-E8687A, BCG-E8688A, BCG-E8689A, BCG-E8690A, BCG-E8691A, BCG-E8692A, BCG-E8693A, BCG-E8694A, BCG-E8695A To whom it may concern: Apple, Inc. hereby declares that the MIF values detailed below are based on worst case operating modes for all air interfaces for which the HAC rating is provided based on the current methodology for determining MIF values. SPEAG UID Summary UID Communication System Name MIF (dB) 10021-DAC GSM-FDD (TDMA, GMSK) 3.63 10023-DAC GPRS-FDD (TDMA, GMSK, TN 0) 3.80 10024-DAC GPRS-FDD (TDMA, GMSK, TN 0-1) 1.15 10011-CAC UMTS-FDD (WCDMA) -27.23 10225-CAC UMTS-FDD (HSPA+) -20.39 10170-CAF LTE-FDD (SC-FDMA, 1 RB, 20 MHz, 16QAM) -9.76 10182-CAF LTE-FDD (SC-FDMA, 1 RB, 15 MHz, 16QAM) -9.76 10176-CAH LTE-FDD (SC-FDMA, 1 RB, 10 MHz, 16QAM) -9.76 10173-CAH LTE-TDD (SC-FDMA, 1 RB, 20 MHz, 16QAM) -1.44 10235-CAH LTE-TDD (SC-FDMA, 1 RB, 10 MHz, 16QAM) -1.44 10061-CAB IEEE 802.11b WiFi 2.4 GHz (DSSS, 11 Mbps) -2.02 10077-CAB IEEE 802.11g WiFi 2.4 GHz (DSSS/OFDM, 54 Mbps) 0.12 10069-CAD IEEE 802.11a/h WiFi 5 GHz (OFDM, 54 Mbps) -3.15 10317-AAE IEEE 802.11a WiFi 5 GHz (OFDM, 6 Mbps, 96pc duty cycle) -9.82 10591-AAD IEEE 802.11n (HT Mixed, 20MHz, MCS0, 90pc duty cycle) -5.59 10636-AAE IEEE 802.11ac WiFi (160MHz, MCS0, 90pc duty cycle) -5.56 10671-AAC IEEE 802.11ax/be (20MHz, MCS0, 90pc duty cycle) -5.58 10797-AAF 5G NR (CP-OFDM, 1 RB, 40 MHz, QPSK, 30 kHz) -14.32 10803-AAF 5G NR (CP-OFDM, 1 RB, 100 MHz, QPSK, 30 kHz) -14.38 N/A 5G NR PC2 (CP-OFDM, 1 RB, 100 MHz, QPSK, 30 kHz) -1.77 N/A 5G NR PC1.5 (CP-OFDM, 1 RB, 100 MHz, QPSK, 30 kHz) 0.47 10866-AAD 5G NR (DFT-s-OFDM, 1 RB, 100 MHz, QPSK, 30 kHz) -16.69 N/A 5G NR PC2 (DFT-s-OFDM, 50 RB, 100 MHz, BPSK, 30 kHz) -1.16 N/A 5G NR PC1.5 (DFT-s-OFDM, 50 RB, 100 MHz, BPSK, 30 kHz) 1.14 N/A 5G NR PC2 (DFT-s-OFDM, 1 RB, 100 MHz, QPSK, 30 kHz) -1.31 N/A 5G NR PC1.5 (DFT-s-OFDM, 1 RB, 100 MHz, QPSK, 30 kHz) 0.96 10898-AAB 5G NR (DFT-s-OFDM, 1 RB, 10 MHz, QPSK, 30 kHz) -16.68 10903-AAB 5G NR (DFT-s-OFDM, 1 RB, 40 MHz, QPSK, 30 kHz) -16.68 10929-AAC 5G NR (DFT-s-OFDM, 1 RB, 10 MHz, QPSK, 15 kHz) -15.06 10930-AAC 5G NR (DFT-s-OFDM, 1 RB, 15 MHz, QPSK, 15 kHz) -15.06 10931-AAC 5G NR (DFT-s-OFDM, 1 RB, 20 MHz, QPSK, 15 kHz) -15.06 10932-AAC 5G NR (DFT-s-OFDM, 1 RB, 25 MHz, QPSK, 15 kHz) -15.06 10933-AAC 5G NR (DFT-s-OFDM, 1 RB, 30 MHz, QPSK, 15 kHz) -15.06 10934-AAC 5G NR (DFT-s-OFDM, 1 RB, 40 MHz, QPSK, 15 kHz) -15.07 10935-AAD 5G NR (DFT-s-OFDM, 1 RB, 50 MHz, QPSK, 15 kHz) -15.07 For “N/A”, MIF values were measured by Test laboratory. Sincerely, Abhishek Rala Apple Inc. Global Certification Manager [email protected]

 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: April 21, 2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046d Attn: Equipment Authorization Branch Ref: FCC ID numbers To whom it may concern: I, the undersigned, hereby authorize UL to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com matters. Any and all acts carried out by UL on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: April 22, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID numbers To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Long-Term Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams. • Electrical Schematic Diagrams. • Technical Descriptions, Product Specifications. • Antenna Locations. • Tune-up Procedure. • Software Security Description. These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Short-Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

 v1.0 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: April 23 rd , 2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 Attn: OET Department To whom it may concern: We, Apple Inc., attest that these devices under FCC ID: are certifying HAC Compliance in accordance with ANSI C63.19-2019. In addition to ANSI C63.19- 2019, we are certifying Volume Control performance in accordance with the limited-term Waiver DA 23- 914. We attest that the package label is in compliance with 47 CFR 20.19(f)(1) and states the lowest 2N and 8N conversational gains obtained under waiver for the passing codecs demonstrated in §2.a. & 2.b. of KDB 285076 D05 CG Interim Waiver DA 23-914 and for the lowest conversational gai n achieved for each 2N and 8N. It is required to file Waiver DA 23-914 as an attachment for certification. Please see Waiver DA 23- 914 attached below. Sincerely, Abhishek Rala Apple Inc. Global Certification Manager [email protected] Model(s) FCC ID A3081 BCG-E8688A A3286 BCG-E8689A A3287 BCG-E8690A A3288 BCG-E8691A A3082 BCG-E8692A A3289 BCG-E8693A A3290 BCG-E8694A A3291 BCG-E8695A A3083 BCG-E8666A A3292 BCG-E8667A A3293 BCG-E8668A A3294 BCG-E8683A A3084 BCG-E8684A A3295 BCG-E8685A A3296 BCG-E8686A A3297 BCG-E8687A Federal Communications CommissionDA 23-914 Before the Federal Communications Commission Washington, D.C. 20554 In the Matter of Amendment of the Commission’s Rules Governing Standards for Hearing Aid-Compatible Handsets ) ) ) ) WT Docket No. 20-3 ORDER Adopted: September 29, 2023Released: September 29, 2023 By the Chief, Wireless Telecommunications Bureau: I.INTRODUCTION 1.Today we grant a limited waiver of section 20.19(b)(1) and (b)(3) of the Commission’s wireless hearing aid compatibility rules with respect to the volume control technical standard that handset manufacturers use in part to certify handsets as hearing aid-compatible under the 2019 ANSI Standard. 1 Our action is prompted by a request filed by the Alliance for Telecommunications Industry Solutions (ATIS) seeking waiver of certain aspects of these rules. 2 Under the terms of the time-limited waiver we grant today, a handset may be certified as hearing aid-compatible under the 2019 ANSI Standard if it meets the volume control testing requirements described in this Order as well as all other aspects of the 2019 ANSI Standard. 2.Consistent with ATIS’s September 12, 2023, ex parte letter (ATIS Ex Parte Letter) and as a condition of this waiver, we require a handset to pass the conversational gain test at the 2 Newton (N) force level on all available narrowband and wideband codecs and air interface combinations. 3 With respect to the 8N force level test, we agree with the ATIS Ex Parte Letter that this test should be performed, and we waive the requirement that a handset achieve at least an 18 dB conversational gain. 4 This waiver is conditioned on manufacturers performing the 8N force level test using the same testing parameters that we are requiring for the 2N force level test and to place on the handset’s package label the resulting conversational gain (even if it is below 18 dB) in a manner consistent with our existing hearing aid compatibility labeling rules. 3.With respect to the related receive distortion and noise performance (distortion/noise) and receive acoustic frequency response performance (frequency response) tests, we agree with the ATIS Ex Parte Letter that handsets must pass testing using at least one narrowband and one wideband codec of the 1 The 2019 ANSI Standard refers to the technical document entitled Accredited Standards Committee C63®– Electromagnetic Compatibility, American National Standard Methods of Measurement of Compatibility Between Wireless Communications Devices and Hearing Aids, ANSI C63.19-2019 (approved Aug. 19, 2019) (2019 ANSI Standard). 2 Petition of ATIS on Behalf of the Covered Entities of the Hearing Aid Compatibility Task Force for Limited, Interim Waiver, WT Docket Nos. 15-285 and 20-3 (filed Dec. 16, 2022) (ATIS Waiver Petition). ATIS filed its waiver petition on behalf of all manufacturers and service providers subject to section 20.19(b)(1) and (b)(3) of the Commission’s wireless hearing aid compatibility rules. Id. at 1, 4. 3 Letter from Thomas Goode, General Counsel, ATIS, to Marlene H. Dortch, Secretary, FCC, WT Docket Nos. 15- 285 and 20-3, at 2 (filed Sept. 12, 2023) (ATIS Ex Parte Letter); see also ATIS Waiver Petition at 4, 12-13. Below we explain the conversational gain test. See infra para. 9. 4 ATIS Ex Parte Letter at 2. Originally, ATIS had proposed to waive the entire 8N force level test. ATIS Waiver Petition at 10-11, 13. Federal Communications CommissionDA 23-914 2 manufacturer’s choosing. 5 We also accept ATIS’s suggestion that at least one narrowband and one wideband codec must pass testing for distortion/noise and frequency response and tests will be limited to one bit rate and only with those air interfaces associated with the chosen codecs and that the other codecs used for conversational gain at the 2N and 8N force levels are not required to undergo the distortion/noise and frequency response tests. 6 Further, as detailed below, we accept ATIS’s suggested method to set the volume control setting for testing these other codecs for conversational gain. 7 4.By taking these steps, we ensure that when the exclusive use transition period ends on December 5, 2023, new handset models can be certified as hearing aid-compatible using the 2019 ANSI Standard as modified by the conditions established in this Order. 8 Our actions allow consumers with hearing loss who use hearing aids or cochlear implants to benefit from wider availability of handsets offering improved hearing aid compatibility under the 2019 ANSI Standard’s radio frequency (RF) interference and inductive coupling requirements. In addition, our approach gives consumers assurance that a handset’s amplifier/speaker combination will…

Text truncated - open the document above for the full version.

v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 1 of 4 www.apple.com FCC E-Label Information Models A3082, A3289, A3290, A3291 A. Information to be displayed 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information on E-label In Manual FCC ID number Yes No SDoC logo Yes No 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class A / B Digital Device user manual statements 1 No Yes DoC declaration 1 No Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 1 No Yes Describe any other FCC regulatory information included in e-label 1 1 If the e-label includes information typically included in the manual then the e-label shall clearly differentiate between information required to be on the device's surface and information required to be in the manual refer to KDB 784748 D02 e labelling v0201. Images of the e-label screen are provided below: Model A3082: v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 2 of 4 www.apple.com Model A3289: Model A3290: Model A3291: v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 3 of 4 www.apple.com B. Access to the required information on the e-label 1. Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: To access the e-label information, in the device, Choose: Settings > General >Legal & Regulatory No special access codes or permissions are required to go through the above steps beyond entering a user- defined password to protect against unauthorized access to the device. 2. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. Yes 3. Users are provided specific instructions on how to access the information. The information to the user is provided in the iPhone Info document. C. Labeling for Importation and Purchasing 1. Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. For devices imported already in individual packages ready for sale, the information may alternatively be provided on the package. It shall contain: v 1.0 Apple Proprietary and Confidential Apple Inc. One Apple Park Way Cupertino, CA Page 4 of 4 www.apple.com 1. The FCC ID and/or the DoC logo (if applicable); and 2. Any other information required by specific rule to be provided on the surface of the product unless such information is permitted to be included in the User’s manual or other packaging inserts. The FCC ID and DoC logo are present on the product packaging. Model number is present in the charging slot.. D. Other considerations 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. 2. All the applicable regulatory information required on the packaging or user instructions must be provided according to the rules even if it is displayed electronically. For example, hearing aid compatibility (HAC) ratings for the phones as specified in 47 C.F.R. § 20.19. Yes, it is provided

Includes iPhone XXXX and USB-C Charge Cable. Power adapter and headphones sold separately. Hearing aid compatible; conversational gain 13 dB with hearing aids and 18 dB without hearing aids. 1GB = 1 billion bytes; actual formatted capacity less. Requires eSIM and acceptance of software license at apple.com/legal/sla.

Head Tissue Simulating Liquids Application Specific absorption rate according to standards (e.g., IEC 62209-x, IEEE 1528) Packaging Plastic container of 10 liters with nozzle Life Time Life time and stability of the liquid depend on usage, storage, and handling of tissue simulating liquid Options Tissue simulating liquids for frequencies outside the below listed ranges are available upon request (please contact [email protected]) Head Tissue Parameters according to IEEE 1528 / IEC 62209-1/ IEC 62209-2 / FCC KDB 865664 Narrow- Band Solutions (±5% Tolerance) Product HSL300V2 HSL450V2 HSL750V2 HSL900V2 Test Frequency (MHz) 300 450 750 835, 900 Main Ingredients Water, Sugar Water, Sugar Water, Sugar Water, Sugar Broad- Band Solutions (±5% Tolerance) Product HBBL1350-1850V3 HBBL1550-1950V3 HBBL1900-3800V3 HBBL3500-5800V5 Test Frequency (MHz) 1450 – 1800 1750 – 1850 1950 – 3000 3500 – 5800 Main Ingredients Water, Tween Water, Tween Water, Tween Water, Oil Broad- Band Solutions (±10% Tolerance) Product HBBL4-250V3 HBBL1350-1850V3 HBBL1550-1950V3 HBBL1900-3800V3 HBBL600-10000V6 Test Frequency (MHz) 4 – 250 1300 – 1850 1550 – 1950 1900 – 3800 600 – 10000 Main Ingredients Water, Tween Water, Tween Water, Tween Water, Tween Water, Oil

Plot No. 1 UL Verification Services Inc. SAR Lab 15 Date/Time: 2024-06-22, 06:38 GSM 850: GPRS-FDD (TDMA, GMSK, TN 0-1), BACK Exposure Conditions Band GSM 850 TSL Permittivity 39.4 Frequency [MHz] | Channel Number 836.600 | 190 TSL Conductivity [S/m] 0.922 Group | UID GSM | 10024-DAC Phantom Section | TSL Flat | HSL Conversion Factor 8.63 Test Distance [mm] 5.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7482 | 2024-04-15 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1239 | 2024-03-06 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 82.1 Dist 3dB Peak [mm] 9.7 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 1.15 | [-39.3, -79.6, -207.0] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.595 0.588 psSAR10g [W/Kg] 0.402 0.338 Power Drift [dB] N/A -0.06 Plot No. 2 UL Verification Services Inc. SAR Lab 14 Date/Time: 2024-06-24, 23:48 GSM 850: GPRS-FDD (TDMA, GMSK, TN 0-1), CHEEK Exposure Conditions Band GSM 850 TSL Permittivity 39.3 Frequency [MHz] | Channel Number 836.600 | 190 TSL Conductivity [S/m] 0.903 Group | UID GSM | 10024-DAC Phantom Section | TSL RightHead | HSL Conversion Factor 9.5 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7589 | 2024-04-15 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1798 | 2024-05-22 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 87.6 Dist 3dB Peak [mm] 7.3 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 0.584 | [13.7, -325.3, -174.1] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.364 0.348 psSAR10g [W/Kg] 0.243 0.220 Power Drift [dB] N/A 0.01 Plot No. 3 UL Verification Services Inc. SAR Lab 13 Date/Time: 2024-06-25, 02:37 PCS 1900: GPRS-FDD (TDMA, GMSK, TN 0-1), EDGE RIGHT Exposure Conditions Band PCS 1900 TSL Permittivity 42.5 Frequency [MHz] | Channel Number 1880.000 | 661 TSL Conductivity [S/m] 1.37 Group | UID GSM | 10024-DAC Phantom Section | TSL Flat | HSL Conversion Factor 7.98 Test Distance [mm] 5.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7569 | 2024-04-15 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1545 | 2024-02-09 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 52.0 x 180.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 8.66 x 15.0 5.9 x 5.9 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 80.8 Dist 3dB Peak [mm] 7.1 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 1.30 | [-25.3, 59.5, -207.0] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.575 0.629 psSAR10g [W/Kg] 0.267 0.289 Power Drift [dB] N/A -0.01 Plot No. 4 UL Verification Services Inc. SAR Lab 19 Date/Time: 2024-06-27, 13:36 PCS 1900: GPRS-FDD (TDMA, GMSK, TN 0-1), CHEEK Exposure Conditions Band PCS 1900 TSL Permittivity 38.5 Frequency [MHz] | Channel Number 1880.000 | 661 TSL Conductivity [S/m] 1.45 Group | UID GSM | 10024-DAC Phantom Section | TSL RightHead | HSL Conversion Factor 7.67 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN3749 | 2024-01-11 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1674 | 2024-05-13 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 5.9 x 5.9 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 71.7 Dist 3dB Peak [mm] 7.5 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 1.12 | [22.1, -339.2, -173.9] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.432 0.450 psSAR10g [W/Kg] 0.260 0.260 Power Drift [dB] 0.00 0.02 Plot No. 5 UL Verification Services Inc. SAR Lab 13 Date/Time: 2024-06-26, 04:50 PCS 1900: GPRS-FDD (TDMA, GMSK, TN 0-1), BACK Exposure Conditions Band PCS 1900 TSL Permittivity 42.5 Frequency [MHz] | Channel Number 1880.000 | 661 TSL Conductivity [S/m] 1.37 Group | UID GSM | 10024-DAC Phantom Section | TSL Flat | HSL Conversion Factor 7.98 Test Distance [mm] 5.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7569 | 2024-04-15 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1545 | 2024-02-09 TSL Type HBBL-600-10000 Software Version 16.2.4.2524 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 4.2 x 4.2 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes M2/M1 [%] 77.2 Dist 3dB Peak [mm] 6.6 Peak SAR [W/kg] | SAR Peak Location [mm] N/A 1.16 | [2.4, 77.1, -207.0] Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.404 0.482 psSAR10g [W/Kg] 0.215 0.210 Power Drift [dB] N/A -0.14 Plot No. 6 UL Verification Services Inc. SAR Lab 13 Date/Time: 2024-06-26, 06:43 Band 2: UMTS-FDD (WCDMA), BACK Exposure Conditions Band Band 2 TSL Permittivity 42.5 Frequency [MHz] | Channel Number 1880.000 | 9400 TSL Conductivity [S/m] 1.37 Group | UID WCDMA | 10011-CAC Phantom Section | TSL Flat | HSL Conversion Factor 7.98 Te…

Text truncated - open the document above for the full version.