BCGA1044Bluetooth Module

 5 Apple Bluetooth Welcome to the world of Bluetooth™, a short-range wireless technology that lets you connect computers, mobile phones, and handheld devices to each other and to the Internet. Your computer includes Bluetooth technology that can help eliminate the need for the cables that traditionally connect devices together. Bluetooth-enabled devices can connect wirelessly to each other anywhere in a 10-meter (33-feet) range, unlike connections between infrared (IR) devices, which must be in line with each other to connect. New features in Apple Bluetooth software allow you to connect to more devices easier, extending the ways you can use and configure Bluetooth technology. This document provides information on how to m connect your computer to Bluetooth-enabled mobile phones and other devices. Connecting Bluetooth devices is known as pairing. m connect to the Internet using Bluetooth and a mobile phone m exchange files between Bluetooth-enabled computers m synchronize data between your computer and Bluetooth-enabled Palm Powered™ handheld devices Setting Up Your Computer for Bluetooth If your computer is equipped with an Apple Bluetooth module, you need to set up your computer to use Apple Bluetooth software. 1 Open the Bluetooth pane of System Preferences and click the Settings tab. 2 Select “Show Bluetooth status in the menu bar.” 2 Apple Bluetooth4/19/02 • Apple Confidential Pairing Your Macintosh With a Bluetooth-Enabled Phone Before you can connect to the Internet with your mobile phone, you need to pair your computer with your Bluetooth enabled phone. Make sure your phone is Bluetooth-enabled on and in “discoverable” mode. See the documentation that came with your phone. 1 Choose Search For Phones from the Bluetooth status menu in the menu bar. 2 Select your phone in the “Pair with a Bluetooth Device” dialog, then click Pair. 3 Enter a passkey. Use any combination of numbers. When prompted, enter the same passkey on your phone. Your computer is now paired with your phone. The name of your phone is listed in the Bluetooth status menu in the menu bar. Apple Bluetooth software remembers the pairing with your phone so you should only need to pair with your phone once. You can now use your phone to dial your ISP and connect to the Internet. Follow these instructions to set up your computer and connect to the Internet. Note: To access the Internet, you must have an active mobile phone account capable of digital services and an account with an Internet service provider (fees may apply). Setting Up Your Computer to Connect to the Internet With a Bluetooth-Enabled Phone 1 Choose your phone from the Bluetooth status menu in the menu bar. 2 Open the Network pane of System Preferences. 3 Choose “bluetooth modem” from the Show pop-up menu. Note: Make sure the “bluetooth modem” port is turned on in the Network pane of System Preferences. To do this, choose Active Network Ports from the Show pop-up menu, then select “bluetooth modem.” 4 Enter your ISP information in the TCP/IP and PPP tabs. 5 Choose the model of your phone from the Modem pop-up menu in the Modem tab. Connecting to the Internet With a Bluetooth-Enabled Phone 1 Choose Open Internet Connect from the Bluetooth status menu in the menu bar. 2 Choose “bluetooth modem” from the Configuration pop-up menu. 3 Click Connect. • Apple ConfidentialApple Bluetooth 3 Pairing Your Macintosh With Bluetooth-Enabled Devices Apple Bluetooth also lets you pair with other Bluetooth-enabled devices like Palm Powered handheld devices and other Bluetooth-enabled computers. Once you have paired with the device, Bluetooth remembers its name and the type of services it provides. Make sure the devices you want to pair with are in discoverable mode. See the documentation that came with the device. 1 Click the Paired Devices tab in the Bluetooth pane of System Preferences. 2 Click New. Bluetooth searches for Bluetooth-enabled devices in range of your computer. 3 Select the device you want to pair with and click Pair. 4 Enter a passkey. Use any combination of numbers. If prompted, enter the same passkey on your Bluetooth-enabled device. Bluetooth remembers the name of the device. To delete the device from the list, select it and click delete. Adding Serial Ports Apple Bluetooth allows you to add any number of serial ports to your computer to enable incoming and outgoing connections with Bluetooth and LAN access devices. To add serial ports to your computer: 1 Click New in the Serial Ports tab of the Bluetooth pane of System Preferences. 2 Name and select options for the port. Note: If the port is an outgoing port, click Select Device and then either search for devices or select a device from the Select Bluetooth Device Service list. 4 Apple Bluetooth4/19/02 • Apple Confidential Exchanging Files Between Bluetooth-Enabled Devices You can use the Bluetooth File Exchange application to exchange files between one or more Bluetooth-enabled devices. The Bluetooth File Exchange application is located in the Bluetooth folder, in the Extras folder inside the Applications folder on your hard disk. Make sure the devices you want to exchange files with are discoverable. 1 Drag the file you want to exchange onto the Bluetooth File Exchange icon. It is located in the Bluetooth folder, in the Extras folder inside the Applications folder on your hard disk. 2 Click Search in the Send Files dialog to find the Bluetooth-enabled devices in range. 3 Select the name of the device you want to send files to from the list, then click Send. Note: If no devices are found, make sure they are in “discoverable” mode. To make your computer discoverable, select Discoverable in the Settings tab of the Bluetooth pane of System Preferences. 4 If you are asked for a passkey, enter one and click Respond. If device receiving the files is prompted for a passkey, enter the same passkey on the receiving device and click Respond. 5 If the receiving device is prompted that it is preparing to receive a…

Text truncated - open the document above for the full version.

Federal Communications Commission Dec 8, 2002 Authorization and Evaluations Division 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for confidentiality per Section 0.459 of FCC Rules, FCC ID: BCGA1044 Request is herby submitted to withhold from public view certain portions of the application for equipment certification for the referenced FCC identifier. In particular, the following sections of the application and report are requested to be kept confidential. Block Diagram Schematic Theory of Operations (Technical Descriptions and Component Layout) If you have further questions or need further information, please contact the undersigned. Mike Kriege EMC Engineer, Apple Computer

From: Christine Vu Sent: Friday, January 03, 2003 6:49 PM To: Mike Kuo; Michael Heckrotte; CLIENT ADVOCATES Cc: Steve Cheng; Mike Kriege (E-mail) Subject: RE: APPLE COMPUTER, FCC ID:BCGA1044, AN02T2500 Hello Mike Kuo, Here are the reply to each question below. 1. Question 1: The FCC Test Report has the correct antenna gain. However, the SAR did not have the correct antenna gain. This is a typo error, therefore, the SAR Report has been revised. It is attached below. The Technical Description has been revised as well to state the correct antenna gain. It is attached below. Note: The Dipole Antenna is no longer desired & is retracted from the submittal. 2. Question 2: AC Line Conduction tests have been performed from 150kHz-30MHz. Attached below is the data. 3. Question 3: Attached below is the additinal test data of the Inverted F Antenna. 4. Question 4: Attached below is provided by client to address the module approval requirement per FCC public notice 00-1407. 5. Question 5: Limited Modular Approval with installation refer to Attachement #4 & #5. 6. Question 6: Attached below is the second label that will be placed on the outside of the device that contains FCC ID. 7. Question 7: Page 16 of the SAR Test Report has been revised. Attached below is the Revise Test Report. -----Original Message----- From: Mike Kuo Sent: Thursday, January 02, 2003 5:01 PM To: Michael Heckrotte; CLIENT ADVOCATES Cc: Steve Cheng; Mike Kriege (E-mail) Subject: FW: APPLE COMPUTER, FCC ID:BCGA1044, AN02T2500 -----Original Message----- From: CERTADM Sent: Thursday, January 02, 2003 4:59 PM To: '[email protected]' Subject: APPLE COMPUTER, FCC ID:BCGA1044, AN02T2500 Notice_content ------------- Question #1: Per the technical description attachment file, it indicates that the max. antenna gain is 2.1dBi. However, in the Bluetooth test report prepared by CCS, it listed the max. antenna gain is -1.6dBi. In the SAR test report, two antennas are listed, one with 3.45dBi gain ( Patch) and the other one with 0.76dBi gain ( Inverted F). Please explain the differences in antenna gain through out the submission files. Question #2: The AC line conducted emission tests performed by Apple Computer were investigated from 400kHz to 30MHz. Per FCC public notice 02-157, for those devices investigated that did not demonstrate new AC line conducted emission limits will have grant conditions which indicate the manufacture and importation of this device must cease on July 10, 2005. If such grant condition is not desirable, please provide new AC line conducted emission tests from 150kHz to 30MHz based upon CISPR 22 Class B requirements. Please confirm or provide additional test data. Question #3: Two different type of antenna are described in the SAR reports. One is Patch antenna and the other one is Inverted F antenna. In the transmitter emission tests plots ( Spurious Radiated emission test plots ) only include one set of spurious radiated emission data tested with patch antenna. Please provide additional test data with Inverted F type antenna. Question #4: Please provide a cover letter to address module approval requirement per FCC public notice 00-1407. Question #5: There is no installation instruction provided for this module approval. Please confirm that this transmitter module will only be installed in Apple Computer's Laptop or Desktop computer. If this module is to be installed by Apple or Apple's authorized OEM, this will be resulted in limited Module Approval. If full module approval is desired, please provide a clear module installation procedure to be given to system integrator. Question #6: Per FCC public notice 00-1407 module approval requirements, if the FCC ID label is not visible after the module is installed in the final product, a second label is required to be placed on the outside of device to identify the FCC ID label. This second label shall have the following wording " Contains FCC ID:BCGA1044 ". Please provide a second label format to comply this requirement. Question #7: Page 16 of SAR test report, EUT configuration Setup #1 indicated that A1041 ( A1041 is associated with separate application. The model name for this application is A1044) was used with Patch antenna. Please explain why the different EUT was used during Setup configuration # 1 tests. Best Regards Mike Kuo The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 60 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

Apple Computer Inc. FCC ID: BCGA1044 Request for Limited Modular Approval ( LMA ) Transmitter Module Characteristics per FCC public notice DA 00-1407 requirements ItemRequirementsEUT 1Have its own RF shieldingDevice is equipped with Metal shielding to cover RF section. Refer to external photos 2Have buffered modulation/data inputs (if such inputs are provided), All inputs to the modules are buffered through logic or microprocessor inputs. 3Have it own power supply regulationInternal 3.3V power regulator. Refer to Block diagram and Technical description file 4Meet the antenna requirements of Section 15.203 Device is equipped with unique antenna connector. Refer to external photos 5Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing Device was tested outside the host computer as stand-alone configuration. Refer to setup photos. 6Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. Two proposed FCC ID label format are included in the filing. One of label is to be placed on the module and the other label is to be placed on the outside of system. Refer to FCC ID label format and location file. 7The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Transmitter module will only be installed by Apple Computer or Apple’s authorized OEM installer. This device will not be sold as module transmitter. Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. 8Address compliance with the Commission's RF exposure limits in Sections 1.1310 and 2.1093. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). The max. output power measured is 7.37dBm. This device will be installed in Apple Computer’s portable product line. SAR evaluation is performed with the EUT as stand alone and the separation distance to the phantom is 0 cm ( direct contact ) to simulate the worst case end-used application.

2.4FH1 xxxxxxxxxx R Model: A1044 FCC ID: BCGA1044 Q23d Regulatory Label Model: A1044 November 26, 2002 Color Specs Type Specs OUTLINED FONTS Label Specifications TELEC Mark Diameter: 3mm Label Dimensions: 5mm x 15mm Background Color: White Label Material: White Pol yester Film Adhesive Material: Acrylic Black

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This product complies with the requirements of European Directives 73/23/EEC and 89/336/EEC. Complies with the Canadian ICES-003 Class B specifications. Apparaten skall anslutas till jordat nätuttag. CLASS 1 LASER PRODUCT LR45149 825-5952-A Siga el procedimiento adecuado para apagar el ordenador. Seguire la procedura di spegnimento appropriata quando il computer è aperto. Schalten Sie den Computer aus, wenn das Gehäuse geöffnet ist. Följ anvisningarna för avstängning när datorn är öppen. Follow proper shutdown procedure when computer is open. Éteignez l'ordinateur selon la procédure correcte. R 825-5952-A Agency Warning Label, inside PRINT SPECIFICATIONS: Background prints non-metallic Pearl per Apple color control 912-0201. Text, logos, symbols Print PMS 430 See engineering drawing for dimensions, material and adhesive. Contains FCC ID: BCGA1044 IC: 579C-A1044 0984

DIGITAL DEVICE RADIATED EMISSIONS

Apple Code Name: Q23dFCC ID: BCGA1044 Inverted F Antenna Band Edge and Spurious Radiated Emissions Data Apple Code Name: Q23dFCC ID: BCGA1044 FCC ID: BCGA1044 Model Number A1044 Apple Code Name: PQ23d The antennas listed below may be used with BCGA1044 Antenna TypeAntenna Model NumberAntenna Gain Patch603-2239-1.9 dBi Inverted F620-2250-4.4 dBi The following pages contain the band edge and spurious radiated emissions data above 1 GHz for FCC ID: BCGA1044, code name Q23d when connected to the Inverted F antenna, model number 603-2250. Inverted F antenna. Transmitting at 2402 MHz Page 39 FCC 2.4 GHz Band Edge Evelyn 1 , Q23d FrequencyLevelLimitDeltaRaw DataAntennaCableAmpAll Factors MHzdBuVdBuVdBdBuVdBdBdBdB 2311.9249.154.0-4.926.9930.041.619.50-22.14 2321.2248.754.0-5.326.4830.061.619.50-22.17 2323.9548.354.0-5.726.1530.071.619.50-22.18 2335.1748.854.0-5.226.6130.111.619.50-22.22 2340.1449.254.0-4.826.9830.121.629.50-22.24 2344.3149.254.0-4.826.9930.131.629.50-22.25 2353.4549.454.0-4.627.1230.161.629.50-22.28 2359.5449.654.0-4.427.2630.181.629.50-22.30 2369.9649.554.0-4.527.2030.211.639.50-22.34 2373.6549.854.0-4.227.4930.221.639.50-22.35 2381.3450.554.0-3.528.0830.241.639.50-22.37 2387.1149.754.0-4.327.3530.261.639.50-22.39 Wed, Dec 18, 2002 11:33:25 PM AutoScan 6.2M Res BW (kHz) 1000 Vid BW (kHz) 1000 Ant. Height 0 VERTICAL 3m Horn Amp1m Graph # 45 80.0 -20.0 -10.0 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 2390.02310.02320.02330.02340.02350.02360.02370.02380.0 Inverted F antenna. Transmitting at 2402 MHz Page 39 FCC 2.4 GHz Band Edge Evelyn 1 , Q23d FrequencyLevelLimitDeltaRaw DataAntennaCableAmpAll Factors MHzdBuVdBuVdBdBuVdBdBdBdB 2312.7348.454.0-5.626.3529.961.619.50-22.07 2318.0248.554.0-5.526.4429.981.619.50-22.09 2327.4748.754.0-5.326.5830.011.619.50-22.12 2331.6449.654.0-4.427.4530.031.619.50-22.14 2342.8749.154.0-4.926.8930.071.629.50-22.18 2348.3249.454.0-4.627.2530.081.629.50-22.20 2353.2949.254.0-4.827.0130.101.629.50-22.22 2362.9149.154.0-4.926.8330.131.629.50-22.26 2369.3249.754.0-4.327.4330.161.639.50-22.28 2377.1749.754.0-4.327.3930.181.639.50-22.31 2383.2749.554.0-4.527.2130.201.639.50-22.33 2386.1550.154.0-3.927.7630.211.639.50-22.34 Wed, Dec 18, 2002 11:34:38 PM AutoScan 6.2M Res BW (kHz) 1000 Vid BW (kHz) 1000 Ant. Height 0 HORIZONTAL 3m Horn Amp1m Graph # 46 80.0 -20.0 -10.0 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 2390.02310.02320.02330.02340.02350.02360.02370.02380.0 Inverted F antenna. Transmitting at 2480 MHz Page 40 FCC 2.4 GHz Band Edge Evelyn 1 , Q23d FrequencyLevelLimitDeltaHeightAngleRaw DataAntennaCableAmpAll Factors MHzdBuVdBuVdBmDegdBuVdBdBdBdB 2484.5752.674.0-21.4 0.00H 29.8930.551.669.50-22.71 2485.0550.974.0-23.1 0.00H 28.1830.551.669.50-22.71 2488.0250.674.0-23.4 0.00H 27.8830.561.679.50-22.73 2490.0650.674.0-23.4 0.00H 27.8730.571.679.50-22.73 2490.5850.574.0-23.5 0.00H 27.7930.571.679.50-22.73 2492.2650.374.0-23.7 0.00H 27.5630.571.679.50-22.74 2493.8351.374.0-22.7 0.00H 28.5430.581.679.50-22.75 2496.7950.474.0-23.6 0.00H 27.6030.591.679.50-22.76 2498.0851.274.0-22.8 0.00H 28.4430.591.679.50-22.76 2498.6850.674.0-23.4 0.00H 27.7930.601.679.50-22.77 Wed, Dec 18, 2002 11:36:31 PM AutoScan 6.2M Res BW (kHz) 1000 Vid BW (kHz) 1000 Ant. Height 0 VERTICAL 3m Horn Amp1m Graph # 47 91.9 -20.0 0.0 20.0 40.0 60.0 80.0 2500.02480.02482.52485.02487.52490.02492.52495.02497.5 Inverted F antenna. Transmitting at 2480 MHz Page 40 FCC 2.4 GHz Band Edge Evelyn 1 , Q23d FrequencyLevelLimitDeltaRaw DataAntennaCableAmpAll Factors MHzdBuVdBuVdBdBuVdBdBdBdB 2483.3746.454.0-7.623.7230.551.669.50-22.71 2485.0546.054.0-8.023.2730.561.669.50-22.72 2487.9445.954.0-8.123.2130.561.679.50-22.73 2490.0246.054.0-8.023.3030.571.679.50-22.74 2490.1446.054.0-8.023.3130.571.679.50-22.74 2493.4346.154.0-7.923.3130.581.679.50-22.75 2494.7146.154.0-7.923.3230.581.679.50-22.75 2496.3946.154.0-7.923.3330.591.679.50-22.76 2498.3646.254.0-7.823.3930.601.679.50-22.76 2499.4446.254.0-7.823.4430.601.679.50-22.77 Wed, Dec 18, 2002 11:38:30 PM AutoScan 6.2M Res BW (kHz) 1000 Vid BW (kHz) 0.01 Ant. Height 0 VERTICAL 3m Horn Amp1m Graph # 48 80.0 -20.0 -10.0 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 2500.02480.02482.52485.02487.52490.02492.52495.02497.5 Inverted F antenna. Transmitting at 2480 MHz Page 41 FCC 2.4 GHz Band Edge Evelyn 1 , Q23d FrequencyLevelLimitDeltaHeightAngleRaw DataAntennaCableAmpAll Factors MHzdBuVdBuVdBmDegdBuVdBdBdBdB 2483.4951.674.0-22.4 0.00H 28.9230.541.669.50-22.71 2485.0549.774.0-24.3 0.00H 27.0230.551.669.50-22.71 2488.1049.974.0-24.1 0.00H 27.1930.561.679.50-22.73 2488.4249.974.0-24.1 0.00H 27.1730.561.679.50-22.73 2490.2649.874.0-24.2 0.00H 27.0530.571.679.50-22.73 2492.5149.774.0-24.3 0.00H 26.9430.571.679.50-22.74 2494.3949.774.0-24.3 0.00H 26.9230.581.679.50-22.75 2495.4349.974.0-24.1 0.00H 27.1030.581.679.50-22.75 2497.2749.474.0-24.6 0.00H 26.6930.591.679.50-22.76 2498.5249.574.0-24.5 0.00H 26.7230.591.679.50-22.76 Wed, Dec 18, 2002 11:41:11 PM AutoScan 6.2M Res BW (kHz) 1000 Vid BW (kHz) 1000 Ant. Height 0 HORIZONTAL 3m Horn Amp1m Graph # 49 90.9 -20.0 0.0 20.0 40.0 60.0 80.0 2500.02480.02482.52485.02487.52490.02492.52495.02497.5 Inverted F antenna. Transmitting at 2480 MHz Page 41 FCC 2.4 GHz Band Edge Evelyn 1 , Q23d FrequencyLevelLimitDeltaRaw DataAntennaCableAmpAll Factors MHzdBuVdBuVdBdBuVdBdBdBdB 2483.3746.454.0-7.623.7030.541.669.50-22.71 2485.0546.054.0-8.023.2830.551.669.50-22.71 2488.3846.054.0-8.023.2730.561.679.50-22.73 2490.0646.054.0-8.023.2930.571.679.50-22.73 2491.5046.154.0-7.923.3230.571.679.50-22.74 2492.0646.154.0-7.923.3330.571.679.50-22.74 2494.0346.154.0-7.923.3230.581.679.50-22.75 2496.7946.154.0-7.923.3430.591.679.50-22.76 2498.4046.254.0-7.823.3930.591.679.50-22.76 2499.3646.254.0-7.823.4330.601.679.50-22.77 Wed, Dec 18, 2002 11:41:57 PM AutoScan 6.2M Res BW (kHz) 1000 Vid BW (kHz) 0.01 Ant. Height 0 HORIZONTAL 3m Horn Amp1m Graph # 50 80.0 -20.0 -10.0 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 2500.02480.02482.52485.02487.52490.02492.52495.02497.5 …

Text truncated - open the document above for the full version.

Blue Room CISPR Class B BCGA1044 Line 1 BCGA1044 using Patch antenna Return to List of Scans Previous ScanNext Scan Fri, Jan 3, 2003 9:44:58 AM AutoScan 6.2M Res BW (kHz) 10 Vid BW (kHz) 10 Step (kHz) 1.0 Dwell (S) 0.005 Line 1 Graph # 2 FrequencyLevelLimitDeltaRawLISNCableXducerAll Factors No. MHzdBuVdBuVdBdBuVdBdBdBdB 1 0.19349.8 Av53.9-4.147.761.990.060.00-2.05 2 0.51731.3 Av46.0-14.730.560.690.070.00-0.76 3 1.29829.6 Av46.0-16.429.090.400.110.00-0.51 4 2.14228.7 Av46.0-17.328.260.340.140.00-0.48 5 7.33333.5 Av50.0-16.532.850.420.280.00-0.70 6 13.36826.7 Av50.0-23.325.790.520.360.00-0.88 Equipment Description Model Number Serial Number Last Calibration Next Calibration Spectrum AnalyzerHP 8568AOU10788622 Apr 200222 Apr 2003 ReceiverRohde & Schwarz ESCS 301001154 Apr 20024 Apr 2003 LISNR&S ESHS3-Z515387428 May 200228 May 2003 CableBlue Room CableCE#228 May 200228 May 2003 1/3/03 9:55 AMUntitled Page 1 of 1http://emc.apple.com/Cupertino%20Blue%20Room/html/1_3_2003_BCGA1044/Graph_2.htm Blue Room CISPR Class B BCGA1044 Line 1 BCGA1044 using Patch antenna Return to List of Scans Previous ScanNext Scan Fri, Jan 3, 2003 9:46:07 AM AutoScan 6.2M Res BW (kHz) 10 Vid BW (kHz) 10 Line 1 Graph # 3 FrequencyLevelLimitDeltaRawLISNCableXducerAll Factors No. MHzdBuVdBuVdBdBuVdBdBdBdB 1 0.19749.2 QP63.8-14.647.191.940.060.00-2.00 2 0.51731.9 QP56.0-24.131.410.300.170.00-0.48 3 1.29828.7 QP56.0-27.328.110.350.250.00-0.60 4 2.14228.3 QP56.0-27.727.560.460.300.00-0.76 5 7.64632.9 QP60.0-27.132.060.480.340.00-0.82 6 14.97023.8 QP60.0-36.222.850.560.390.00-0.95 Equipment Description Model Number Serial Number Last Calibration Next Calibration Spectrum AnalyzerHP 8568AOU10788622 Apr 200222 Apr 2003 ReceiverRohde & Schwarz ESCS 301001154 Apr 20024 Apr 2003 LISNR&S ESHS3-Z515387428 May 200228 May 2003 CableBlue Room CableCE#228 May 200228 May 2003 1/3/03 9:55 AMUntitled Page 1 of 1http://emc.apple.com/Cupertino%20Blue%20Room/html/1_3_2003_BCGA1044/Graph_3.htm Blue Room CISPR Class B BCGA1044 Line 2 BCGA1044 using Patch antenna Return to List of Scans Previous ScanNext Scan Fri, Jan 3, 2003 9:47:16 AM AutoScan 6.2M Res BW (kHz) 10 Vid BW (kHz) 10 Step (kHz) 1.0 Dwell (S) 0.005 Line 2 Graph # 5 FrequencyLevelLimitDeltaRawLISNCableXducerAll Factors No. MHzdBuVdBuVdBdBuVdBdBdBdB 1 0.32233.7 Av49.7-16.032.481.130.070.00-1.20 2 0.39233.3 Av48.0-14.732.350.900.070.00-0.97 3 1.29830.0 Av46.0-16.029.530.380.110.00-0.49 4 2.14229.2 Av46.0-16.828.740.300.140.00-0.45 5 8.00932.6 Av50.0-17.431.960.410.270.00-0.68 6 13.46626.5 Av50.0-23.525.630.480.360.00-0.85 Equipment Description Model Number Serial Number Last Calibration Next Calibration Spectrum AnalyzerHP 8568AOU10788622 Apr 200222 Apr 2003 ReceiverRohde & Schwarz ESCS 301001154 Apr 20024 Apr 2003 LISNR&S ESHS3-Z515387428 May 200228 May 2003 CableBlue Room CableCE#228 May 200228 May 2003 1/3/03 9:56 AMUntitled Page 1 of 1http://emc.apple.com/Cupertino%20Blue%20Room/html/1_3_2003_BCGA1044/Graph_5.htm Blue Room CISPR Class B BCGA1044 Line 2 BCGA1044 using Patch antenna Return to List of Scans Previous ScanNext Scan Fri, Jan 3, 2003 9:48:25 AM AutoScan 6.2M Res BW (kHz) 10 Vid BW (kHz) 10 Line 2 Graph # 6 FrequencyLevelLimitDeltaRawLISNCableXducerAll Factors No. MHzdBuVdBuVdBdBuVdBdBdBdB 1 0.19748.9 QP63.8-14.846.971.890.060.00-1.95 2 0.52132.8 QP56.0-23.232.320.310.160.00-0.47 3 1.55629.1 QP56.0-26.928.590.310.220.00-0.52 4 2.14228.6 QP56.0-27.427.970.400.270.00-0.67 5 8.00532.3 QP60.0-27.731.580.430.300.00-0.73 6 12.58725.6 QP60.0-34.424.760.500.350.00-0.85 Equipment Description Model Number Serial Number Last Calibration Next Calibration Spectrum AnalyzerHP 8568AOU10788622 Apr 200222 Apr 2003 ReceiverRohde & Schwarz ESCS 301001154 Apr 20024 Apr 2003 LISNR&S ESHS3-Z515387428 May 200228 May 2003 CableBlue Room CableCE#228 May 200228 May 2003 1/3/03 9:57 AMUntitled Page 1 of 1http://emc.apple.com/Cupertino%20Blue%20Room/html/1_3_2003_BCGA1044/Graph_6.htm

FCC CFR47 PART 15 SUBPART C CERTIFICATION TEST REPORT FOR BLUETOOTH MODULE MODEL NUMBER: A1044 BRAND NAME: APPLE BLUETOOTH MODULE FCC ID: BCGA1044 REPORT NUMBER: 02U1697-1B ISSUE DATE: DECEMBER 31, 2002 Prepared for APPLE COMPUTER 1 INFINITE LOOP CUPERTINO, CA 95014 Prepared by COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD, MORGAN HILL, CA 95037, USA TEL: (408) 463-0885 FAX: (408) 463-0888 REPORT NO: 02U1697-1B DATE: DECEMBER 31, 2002 EUT: BLUETOOTH MODULE FCC ID: BCGA1044 Page 2 of 57 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION.................................................................................................3 2. EUT DESCRIPTION.........................................................................................................................4 3. TEST METHODOLOGY..................................................................................................................5 4. FACILITIES AND ACCREDITATION..........................................................................................5 4.1. FACILITIES AND EQUIPMENT.................................................................................................5 4.2. LABORATORY ACCREDITATIONS AND LISTINGS.................................................................5 4.3. TABLE OF ACCREDITATIONS AND LISTINGS........................................................................6 CALIBRATION AND UNCERTAINTY.................................................................................................7 4.4. MEASURING INSTRUMENT CALIBRATION............................................................................7 4.5. MEASUREMENT UNCERTAINTY..............................................................................................7 4.6. TEST AND MEASUREMENT EQUIPMENT...............................................................................8 5. SETUP OF EQUIPMENT UNDER TEST.......................................................................................9 6. APPLICABLE RULES....................................................................................................................13 7. TEST SETUP, PROCEDURE AND RESULT..............................................................................17 7.1. 20 dB BANDWIDTH...................................................................................................................17 7.2. HOPPING FREQUENCY SEPARATION..................................................................................21 7.3. NUMBER OF HOPPING FREQUENCIES...............................................................................24 7.4. TIME OF OCCUPANCY............................................................................................................27 7.5. PEAK POWER............................................................................................................................30 7.6. PEAK POWER SPECTRAL DENSITY.......................................................................................31 7.7. SPURIOUS EMISSIONS – CONDUCTED MEASUREMENTS.................................................38 7.8. UNDESIRABLE EMISSIONS – RADIATED MEASUREMENTS..............................................50 7.9. POWERLINE CONDUCTED EMISSIONS................................................................................53 7.10. SETUP PHOTOS........................................................................................................................54 REPORT NO: 02U1697-1B DATE: DECEMBER 31, 2002 EUT: BLUETOOTH MODULE FCC ID: BCGA1044 Page 3 of…

Text truncated - open the document above for the full version.