BCGA1392802.11 a/b/g/n 2x2 Access Point

AirPort Express Setup Guide Contents 3 5 Getting Started 7 About AirPort Express 9 Connecting Your AirPort Express 10 What You Need to Get Started 11 AirPort Express Status Lights 12 AirPort Software 13 What’s Next 15 Setting Up AirPort Express 16 Using AirPort Utility on your Computer 16 Using AirPort Setup Assistant on an iOS Device 17 Configuring and Sharing Internet Access 18 Creating a New Wireless Network 19 Joining an Existing Wireless Network 20 Setting Advanced Options Using a Computer 23 Using AirPort Express to Stream Music 25 The AirPort Express Network 4 27 Tips and Troubleshooting 27 AirPort Express Placement Considerations 28 Items That Can Cause Interference with AirPort 29 Problems and Solutions 35 Learning More, Service, and Support 35 Onscreen Help 35 Online Resources 36 Obtaining Warranty Service 36 Finding the Serial Number of Your AirPort Express 37 AirPort Express Specifications 38 AirPort Express Safety Tips 40 Regulatory Compliance Information 1 5 Getting Started Read this guide to set up and use your AirPort Express. AirPort Express provides simultaneous dual-band wireless 802.11n Wi-Fi networking. When you set up your AirPort Express Base Station, it creates two high-speed Wi-Fi networks: ÂA 2.4 gigahertz (GHz) network for 802.11b, 802.11g, and 802.11n devices, such as iPhone, iPod touch, and older computers ÂA 5 GHz network for 802.11n and 802.11a devices, such as newer computers, iPad, and Apple TV Your wireless devices join whichever network provides the best performance and compatibility. You can use AirPort Express to share your Internet connection with all the wireless computers and other devices on your network, play music on your home stereo, share a network printer, and connect to other devices. Your AirPort Express comes with AirPlay, an easy way to play iTunes music through remote speakers from your computer, or from an iOS device, such as an iPad, iPhone, or iPod Touch. 6 Chapter 1 Getting Started With AirPort Express, you can: ÂCreate a password-protected wireless home network, and then connect to the Internet and share the connection with computers and other wireless devices, such as iPad, iPhone, and Apple TV. You can also share files among computers connected to the network. ÂCreate a guest network, with or without password protection, to give wireless Internet access to friends and visitors. Devices that connect to the network only have access to the Internet. ÂConnect your AirPort Express to your Ethernet network. Wireless-equipped Mac and Windows computers, and other wireless devices can then access the network without being connected by a cable. ÂConnect a USB or Ethernet device, such as a printer, to your AirPort Express. All of the computers on the AirPort network can access the device. ÂConnect a self-powered USB hard disk to your AirPort Express. All of the computers on the AirPort network can access the information on the hard disk. ÂConnect a USB hub to your AirPort Express, and then connect multiple USB devices, such as printers or hard disks. All of the computers on the AirPort network can access those devices. ÂConnect your stereo or powered speakers to your AirPort Express, and then use AirPlay to play iTunes music from any computer or iOS device. 7 Chapter 1 Getting Started About AirPort Express AirPort Express has five ports on the back: ÂA 10/100Base-T Ethernet Wide Area Network (WAN) port (<) for connecting a DSL or cable modem, or for connecting to an existing Ethernet network ÂA 10/100Base-T Ethernet Local Area Network (LAN) port (G) for connecting Ethernet devices such as printers or computers, or for connecting to an existing Ethernet network ÂA USB port (d) for connecting a USB printer, a hard disk, or a hub for connecting several devices ÂAn analog and optical digital audio stereo mini-jack (-) for connecting AirPort Express to a stereo or powered speakers ÂA power port for connecting AirPort Express to a power source 8 Chapter 1 Getting Started Status lightReset button WAN EthernetUSB Audio OutPower Link lights Power cord (Your power cord may look different.) Next to the ports is a reset button for troubleshooting your AirPort Express. The status light on the front of AirPort Express shows the current status. 9 Chapter 1 Getting Started Connecting Your AirPort Express Before you plug in your AirPort Express, first connect the appropriate cables to the ports you want to use—including: Â An Ethernet cable connecting your DSL or cable modem to the WAN port (if you’ll connect to the Internet) ÂAn audio cable connecting your stereo to the audio out port (if you’ll use AirPlay to play music from iTunes or iOS devices) ÂA USB or Ethernet cable connecting a printer to the USB or Ethernet port (if you’ll print to it using AirPort Express) After you connect the cables for all the devices you plan to use, plug the AirPort Express power cord into the power port and a power outlet. There ‘s no on/off switch. When you plug the AirPort Express power cord into a power outlet, the status light glows amber while your AirPort Express starts up. After it starts up, the status light flashes amber until your AirPort Express is updated with new settings. The status light glows green after your AirPort Express is set up and connected to the Internet or a network. 10 Chapter 1 Getting Started What You Need to Get Started To set up AirPort Express using a Mac, you need: ÂA Mac computer with an AirPort card installed (to set it up wirelessly), or a Mac computer connected to your AirPort Express with an Ethernet cable (to set it up using Ethernet) ÂMac OS X v10.5.7 or later ÂAirPort Utility v5.6 or later To set up AirPort Express using a Windows PC, you need: ÂA Windows computer with a 300 MHz or higher processor and Wi-Fi certified wireless capability (to set it up wirelessly), or a Windows computer connected to the AirPort Express with an Ethernet cable (to set it up using Ethernet) ÂWindows Vista (SP2) or Windows 7 (SP1) ÂAirPort Utility for Win…

Text truncated - open the document above for the full version.

 Apple Inc. 1 Infinite Loop Cupertino, CA 95014 www.apple.com Date: May 30, 2012 Federal Communications Commission Office of Engineering and Technology Laboratory Division Equipment Authorization branch 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Office of Engineering and Technology Re: DFS Attestation - FCC ID: BCGA1392 To whom it may concern: In reference to the application under FCC ID: BCGA1392, the Applicant hereby attests that DFS channels are not supported on US SKUs, therefore, Ad-Hoc Mode and Group Owner Mode will not be supported in these channels. This device does not transmit beacons in 5.25-5.35 GHz and 5.47-5.725 GHz bands. Sincerely, ____________________ Tiberiu Muresan Apple Inc. Wireless Certification Manager 1 Infinite Loop MS 35-3MP Cupertino CA 95014 T: 408-974-4968 [email protected]

 Apple Inc. 1 Infinite Loop Cupertino, CA 95014 www.apple.com Date: May 30, 2012 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Office of Engineering and Technology Ref: FCC ID: BCGA1392 To whom it may concern: I, the undersigned, hereby authorize Underwriters Laboratories Compliance Certification Services, and hereafter referred to as UL CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;  Apple Inc. 1 Infinite Loop Cupertino, CA 95014 www.apple.com e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Tiberiu Muresan Apple Inc. Wireless Certification Manager 1 Infinite Loop MS 35-3MP Cupertino CA 95014 T: 408-974-4968 [email protected]

 Apple Inc. 1 Infinite Loop Cupertino, CA 95014 www.apple.com Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality FCC ID: BCGA1392 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Permanent Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams • Schematic Diagrams • Technical Description • Antenna Specifications These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Short Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized  Apple Inc. 1 Infinite Loop Cupertino, CA 95014 www.apple.com devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Date: May 30, 2012 ____________________ Tiberiu Muresan Apple Inc. Wireless Certification Manager 1 Infinite Loop MS 35-3MP Cupertino CA 95014 T: 408-974-4968 [email protected]

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Authorized Individual To Whom It May Concern: Pursuant to the provisions of KDB 852134 D01 Authorized Policy Form 731, I, grantee contact, hereby authorize Tiberiu Muresan to act on behalf of Apple Inc. for all matters relating to equipment authorization, including signing Form 731, attestations, and confidentiality request letters. This authorized individual may also assign another party to act as an authorized agent. This authorization is valid until further written notice from the grantee contact. Marc Douat Apple Inc. 1 Infinite Loop Cupertino, CA 95014

Label Location

REPORT FCC ID: B COMPLIA 47173 BE This r 10. M FCC RUL §1.1310 human e of portab chapter. NO: 12U1432 BCGA1392 ANCE CERTIF ENICIA STREE report shall n MAXIMUM LES The criteria xposure to r ble devices w 26-1C FICATION SE ET, FREMON not be repro M PERMIS listed in Tab radio-freque which shall b Pa ERVICES (UL NT, CA 94538 oduced excep SSIBLE E ble 1 shall be ncy (RF) rad be evaluated age 89 of 97 CCS) , US A TE pt in full, wit EXPOSUR e used to ev diation as sp d according t EL: (510) 771- thout the wri RE valuate the e pecified in §1 to the provis DAT FORM -1000 FA itten approva environmenta 1.1307(b), e sions of §2.1 TE: JUNE 11, IC: 579C-A NO: CCSUP4 AX: (510) 661 al of UL CCS al impact of xcept in the 093 of this , 2012 A1392 4701E -0888 S. case REPORT FCC ID: B COMPLIA 47173 BE This r IC RULES IC Safet y shall not Table 5, average d Table 5, NO: 12U1432 BCGA1392 ANCE CERTIF ENICIA STREE report shall n S y Code 6, Se be exposed if the field st d spatially an when avera 26-1C FICATION SE ET, FREMON not be repro ection 2.2.1 d to electrom trength exce nd over time ged spatially Pa ERVICES (UL NT, CA 94538 oduced excep (a) A person magnetic radi eeds the valu e, or if the po y and over ti age 90 of 97 CCS) , US A TE pt in full, wit n other than iation in a fre ue given in C ower density ime. EL: (510) 771- thout the wri an RF and equency ban Column 2 or y exceeds th DAT FORM -1000 FA itten approva microwave e nd listed in C r 3 of Table 5 e value give TE: JUNE 11, IC: 579C-A NO: CCSUP4 AX: (510) 661 al of UL CCS exposed wo Column 1 of 5, when en in Column , 2012 A1392 4701E -0888 S. rker n 4 of REPORT NO: 12U14326-1C DATE: JUNE 11, 2012 FCC ID: BCGA1392 IC: 579C-A1392 Page 91 of 97 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701E 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. EQUATIONS Power density is given by: S = EIRP / (4 * Pi * D^2) where S = Power density in W/m^2 EIRP = Equivalent Isotropic Radiated Power in W D = Separation distance in m Power density in units of W/m^2 is converted to units of mWc/m^2 by dividing by 10. Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) where D = Separation distance in m EIRP = Equivalent Isotropic Radiated Power in W S = Power density in W/m^2 In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. LIMITS From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2 From IC Safety Code 6, Section 2.2 Table 5 Column 4, S = 10 W/m^2 RSS-102 Clause 2.5.2 RF exposure evaluation is required if the separation distance between the user and the device’s radiating element is greater than 20 cm, except when the device operates as follows: •below 1.5 GHz and the maximum e.i.r.p. of the device is equal to or less than 2.5 W; •at or above 1.5 GHz and the maximum e.i.r.p. of the device is equal to or less than 5 W. REPORT NO: 12U14326-1C DATE: JUNE 11, 2012 FCC ID: BCGA1392 IC: 579C-A1392 Page 92 of 97 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701E 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. RESULTS Multiple chain or colocated transmitters BandModeChainSeparationOutputAntennaDutyIC PowerFCC Power forDistanceAV PowerGainCycleDensityDensity MIMO(m)(dBm)(dBi)(%)(W/m^2)(mW/cm^2) 5.2 GHzWLAN113.600.9396.7 5.2 GHzWLAN213.501.8896.7 0.200.120.012 Combined Multiple chain or colocated transmitters BandModeChainSeparationOutput AntennaEIRPEIRPIC PowerFCC Power forDistancePowerGainDensityDensity MIMO(m)(dBm)(dBi)(dBm)(W)(W/m^2)(mW/cm^2) 2.4 GHzWLAN120.501.4921.990.16 2.4 GHzWLAN220.651.8222.470.18 5.2 GHzWLAN113.600.9314.530.03 5.2 GHzWLAN213.501.8815.380.03 0.200.400.790.079 Combined

FCC CFR47 PART 15 SUBPART E INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR 802.11 a/b/g/n 2X2 ACCESS POINT MODEL NUMBER: A1392 FCC ID: BCGA1392 IC: 579C-A1392 REPORT NUMBER: 12U14326-1, Revision B ISSUE DATE: JUNE 06, 2012 Prepared for APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. Prepared by COMPLIANCE CERTIFICATION SERVICES (UL CCS) 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 12U14326-1B DATE: JUNE 06, 2012 FCC ID: BCGA1392 IC: 579C-A1392 Page 2 of 97 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701E 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. Revision History Rev. Issue Date Revisions Revised By -- 05/21/12 Initial Issue F. Ibrahim A 05/25/12 Updated section 5.3, some formatting issues F. Ibrahim B 06/06/12 Removed references and data that belong to DFS bands and removed RX data F. Ibrahim REPORT NO: 12U14326-1B DATE: JUNE 06, 2012 FCC ID: BCGA1392 IC: 579C-A1392 Page 3 of 97 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701E 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 5 2. TEST METHODOLOGY ........................................................................................................ 6 3. FACILITIES AND ACCREDITATION .................................................................................... 6 4. CALIBRATION AND UNCERTAINTY .................................................................................. 6 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................ 6 4.2. SAMPLE CALCULATION ............................................................................................... 6 4.3. MEASUREMENT UNCERTAINTY ................................................................................. 6 5. EQUIPMENT UNDER TEST ................................................................................................. 7 5.1. DESCRIPTION OF EUT ................................................................................................. 7 5.2. MAXIMUM OUTPUT POWER ........................................................................................ 7 5.3. DESCRIPTION OF AVAILABLE ANTENNAS ................................................................ 7 5.4. SOFTWARE AND FIRMWARE ...................................................................................... 8 5.5. WORST-CASE CONFIGURATION AND MODE ............................................................ 8 5.6. DESCRIPTION OF TEST SETUP .................................................................................. 9 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 11 7. ANTENNA PORT TEST RESULTS .................................................................................... 12 7.1. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS ..................................... 12 7.1.1. ON TIME AND DUTY CYCLE RESULTS ............................................................. 12 7.1.2. MEASUREMENT METHOD FOR POWER AND PPSD ....................................... 12 7.1.3. MEASUREMENT METHOD FOR AVG SPURIOUS EMISSIONS ABOVE 1 GHz 12 7.1.4. DUTY CYCLE PLOTS ........................................................................................... 13 7.2. 802.11a MODE IN THE 5.2 GHz BAND ....................................................................... 15 7.2.1. 26 dB BANDWIDTH .............................................................................................. 15 7.2.2. 99% BANDWIDTH ................................................................................................ 19 7.2.3. AVERAGE POWER .............................................................................................. 24 7.2.4. OUTPUT POWER AND PPSD .............................................................................. 25 7.2.5. PEAK EXCURSION .............................................................................................. 31 7.3. 802.11n HT20 MODE IN THE 5.2 GHz BAND ............................................................. 36 7.3.1. 26 dB BANDWIDTH .............................................................................................. 36 7.3.2. 99% BANDWIDTH ................................................................................................ 40 7.3.3. AVERAGE POWER .............................................................................................. 45 7.3.4. OUTPUT POWER AND PPSD .............................................................................. 46 7.3.5. PEAK EXCURSION .............................................................................................. 52 7.4. 802.11n HT40 MODE IN THE 5.2 GHz BAND ............................................................. 57 7.4.1. 26 dB BANDWIDTH .............................................................................................. 57 7.4.2. 99% BANDWIDTH ................................................................................................ 60 7.4.3. AVERAGE POWER .............................................................................................. 63 7.4.4. OUTPUT POWER AND PPSD .............................................................................. 64 7.4.5. PEAK EXCURSION .............................................................................................. 68 REPORT NO: 12U14326-1B DATE: JUNE 06, 2012 FCC ID: BCGA1392 IC: 579C-A1392 Page 4 of 97 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701E 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: …

Text truncated - open the document above for the full version.

REPORT FCC ID: B COMPLIA 47173 BE This r 11. S 11.1 NO: 12U1432 BCGA1392 ANCE CERTIF ENICIA STREE report shall n SETUP PH . ANT ANTENN 26-1C FICATION SE ET, FREMON not be repro HOTOS ENNA PO NA PORT CO Pa ERVICES (UL NT, CA 94538 oduced excep ORT COND ONDUCTED age 93 of 97 CCS) , US A TE pt in full, wit DUCTED R D PHOTO EL: (510) 771- thout the wri RF MEASU DAT FORM -1000 FA itten approva UREMENT TE: JUNE 11, IC: 579C-A NO: CCSUP4 AX: (510) 661 al of UL CCS T SETUP , 2012 A1392 4701E -0888 S. REPORT FCC ID: B COMPLIA 47173 BE This r 11.2 NO: 12U1432 BCGA1392 ANCE CERTIF ENICIA STREE report shall n 2. RAD RADIATE 26-1C FICATION SE ET, FREMON not be repro IATED RF ED FRONT Pa ERVICES (UL NT, CA 94538 oduced excep F MEASUR PHOTO age 94 of 97 CCS) , US A TE pt in full, wit REMENT S EL: (510) 771- thout the wri SETUP DAT FORM -1000 FA itten approva TE: JUNE 11, IC: 579C-A NO: CCSUP4 AX: (510) 661 al of UL CCS , 2012 A1392 4701E -0888 S. REPORT FCC ID: B COMPLIA 47173 BE This r NO: 12U1432 BCGA1392 ANCE CERTIF ENICIA STREE report shall n RADIATE 26-1C FICATION SE ET, FREMON not be repro ED BACK P Pa ERVICES (UL NT, CA 94538 oduced excep HOTO age 95 of 97 CCS) , US A TE pt in full, wit EL: (510) 771- thout the wri DAT FORM -1000 FA itten approva TE: JUNE 11, IC: 579C-A NO: CCSUP4 AX: (510) 661 al of UL CCS , 2012 A1392 4701E -0888 S. REPORT FCC ID: B COMPLIA 47173 BE This r 11.3 NO: 12U1432 BCGA1392 ANCE CERTIF ENICIA STREE report shall n 3. POW LINE CO 26-1C FICATION SE ET, FREMON not be repro WERLINE C ONDUCTED Pa ERVICES (UL NT, CA 94538 oduced excep CONDUCT FRONT PH age 96 of 97 CCS) , US A TE pt in full, wit TED EMIS OTO EL: (510) 771- thout the wri SSIONS M DAT FORM -1000 FA itten approva EASUREM TE: JUNE 11, IC: 579C-A NO: CCSUP4 AX: (510) 661 al of UL CCS MENT SET , 2012 A1392 4701E -0888 S. TUP REPORT FCC ID: B COMPLIA 47173 BE This r NO: 12U1432 BCGA1392 ANCE CERTIF ENICIA STREE report shall n LINE CO 26-1C FICATION SE ET, FREMON not be repro ONDUCTED Pa ERVICES (UL NT, CA 94538 oduced excep END O BACK PHO age 97 of 97 CCS) , US A TE pt in full, wit OF REPO OTO EL: (510) 771- thout the wri ORT DAT FORM -1000 FA itten approva TE: JUNE 11, IC: 579C-A NO: CCSUP4 AX: (510) 661 al of UL CCS , 2012 A1392 4701E -0888 S.