Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Australia New Zealand U.S. EU Japan Korea Korea ႞Ⴎஶဵ"ถዑૺ ᆼකస: Try-on Case (A1668) ၨჭጭ: MSIP-RMI-APL-A1668 ၨჭၴືጭ"ྴዯᇬ൘ྤ၉ዽፂຫ ႞Ⴎၴ႞Ⴎ"Apple Inc.თ FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: T his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Incr ease the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Important: C hanges or modifications to this product not authorized by Apple could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil. Industry Canada Statement Complies with the Canadian ICES- 003 Class B specifications. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Europe Complies with European Low Voltage and EMC Directives. Apple’s EU representative is Apple Distribution International, Hollyhill Industrial Estate, Cork, Ireland. Japan Compliance Statement—VCCI Class B Statement Certification and Compliance A1668 - Important Information Guide Apple and the Environment At Apple, we recognize our responsibility to minimize the environmental impacts of our operations and products. For more information, go to www.apple.com/environment. Disposal and Recycling Information The symbol indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines. For information about Apple’s recycling program, recycling collection points, restricted substances and other environmental initiatives, visit www.apple.com/environment. European Union—Disposal Information The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. Union Européenne—informations sur l’élimination Le symbole ci-dessus signifie que, conformément aux lois et réglementations locales, vous devez jeter votre produit et/ou sa batterie séparément des ordures ménagères. Lorsque ce produit arrive en fin de vie, apportez-le à un point de collecte désigné par les autorités locales. La collecte séparée et le recyclage de votre produit et/ou de sa batterie lors de sa mise au rebut aideront à préserver les ressources naturelles et à s’assurer qu’il est recyclé de manière à protéger la santé humaine et l’environnement. Europäische Union—Informationen zur Entsorgung Das oben aufgeführte Symbol weist darauf hin, dass dieses Produkt und/ oder die damit verwendete Batterie den geltenden gesetzlichen Vorschriften entsprechend und vom Hausmüll getrennt entsorgt werden muss. Geben Sie dieses Produkt zur Entsorgung bei einer offiziellen Sammelstelle ab. Durch getrenntes Sammeln und Recycling werden die Rohstoffreserven geschont und es ist sichergestellt, dass beim Recycling des Produkts und/oder der Batterie alle Bestimmungen zum Schutz von Gesundheit und Umwelt eingehalten werden. Unione Europea—informazioni per lo smaltimento Il simbolo qui sopra significa che, in base alle leggi e alle normative locali, il prodotto e/o la sua batteria dovrebbero essere riciclati separatamente dai rifiuti domestici. Quando il prodotto diventa inutilizzabile, portalo nel punto di raccolta stabilito dalle autorità locali. La raccolta separata e il riciclaggio del prodotto e/o della sua batteria al momento dello smaltimento aiutano a conservare le risorse naturali e assicurano che il ric…
Text truncated - open the document above for the full version.
Try-On Case Instructions • Retail • February 2015 1 A1668 - Try-On Case Retail 23 Compressed Air (Japan to pull from back of house) Gloves TrayApple Watch Demo Units Kit Contents Microfiber Cloth Wear gloves for all steps. Polishing Cloth Tray LidC-Clip 85W MagSafe 2 Power Adapter Draft Try-On Case Instructions • Retail • February 2015 7 Try-On CaseRetail 8 456 9 Draft Try-On Case Instructions • Retail • February 2015 Try-On CaseRetail 1112 Refer to Merchandising Plan 10 14 Use clip to maintain Milanese band shape. 1513 Always insert with crown up. When charging, keep try-on case at least 10cm away from your body, to ensure exposure levels remain at or below the as-tested levels. Draft Try-On Case Instructions • Retail • February 2015 Try-On CaseRetail 1716 Draft
Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: December 13, 2012 Subject: Authorized Individual To Whom It May Concern: Pursuant to the provisions of KDB 852134 D01 Authorized Policy Form 731, I, grantee contact, hereby authorize Tiberiu Muresan to act on behalf of Apple Inc. for all matters relating to equipment authorization, including signing Form 731, attestations, and confidentiality request letters. This authorized individual may also assign another party to act as an authorized agent. This authorization is valid until further written notice from the grantee contact. Marc Douat Apple Inc. 1 Infinite Loop Cupertino, CA 95014
Apple Inc. 1 Infinite Loop Cupertino, CA v1.0 www.apple.com Date: February 4, 2015 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd., Columbia MD 21046 Attn: Office of Engineering and Technology Ref: FCC ID: BCGA1668, Model: A1668 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc., located at 47173 Benicia Street, Fremont, CA 94538, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; Apple Inc. 1 Infinite Loop Cupertino, CA v1.0 www.apple.com e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Tiberiu Muresan Apple Inc. Wireless Certification Manager [email protected]
Apple Inc. 1 Infinite Loop Cupertino, CA v1.0 www.apple.com Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality FCC ID: BCGA1668, Model A1668 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Permanent Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams • Electrical Schematic Diagrams • Technical Description These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Short Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents Apple Inc. 1 Infinite Loop Cupertino, CA v1.0 www.apple.com from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Date: February 4, 2015 ____________________ Tiberiu Muresan Apple Inc. Wireless Certification Manager [email protected]
A1668 Magnetic Charging cables Apple Proprietary and Confidential A1668 Front - MagSafe connector Apple Proprietary and Confidential A1668 Bottom side Apple Proprietary and Confidential
NOTICE OF PROPRIETARY PROPERTY. THE INFORMATION CONTAINED HEREIN IS THE PROPRIETARY PROPERTY OF APPLE INC. THE POSSESSOR AGREES TO THE FOLLOWING: (i) TO MAINTAIN THIS DOCUMENT IN CONFIDENCE,(ii) NOT TO REPRODUCE OR COPY IT (iii) NOT TO REVEAL OR PUBLISH IT IN WHOLE OR PART. A1668 - Label Location Apple Confidential
A1668 Cover removed Apple Proprietary and Confidential A1668 MLB - Front Apple Proprietary and Confidential A1668 MLB - Back Apple Proprietary and Confidential
FCC Part 1 Subpart I FCC Part 2 Subpart J INDUSTRY CANADA RSS 216 ISSUE 1 RF EXPOSURE REPORT FOR APPLE WATCH MAGNETIC CHARGING TRY-ON CASE MODEL NUMBER: A1668 REPORT NUMBER: 14U19491-E10, REVISION C FCC ID: BCGA1668 IC: 579C-A1668 ISSUE DATE: FEBRUARY 25, 2015 Prepared for APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 14U19491-E10C DATE: FEBRUARY 25, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 2 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By -- 02/12/2015 Initial Issue M. Mekuria B 02/24/2015 Address TCB’s Questions on Section 5.3 and 7.3 C. Pang C 02/25/2015 Add Description on Section 5.2 C. Pang REPORT NO: 14U19491-E10C DATE: FEBRUARY 25, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 3 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. REFERENCES ...................................................................................................................... 5 4. FACILITIES AND ACCREDITATION .................................................................................... 5 5. EQUIPMENT UNDER TEST ................................................................................................. 6 5.1. DESCRIPTION OF EUT ................................................................................................. 6 5.2. DESCRIPTION OF TEST SETUP .................................................................................. 6 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................... 9 7. MAXIMUM PERMISSIBLE RF EXPOSURE ......................................................................... 9 7.1. FCC RULES ................................................................................................................... 9 7.2. IC RULES ..................................................................................................................... 10 7.3. MEASUREMENTS RESULTS ...................................................................................... 11 REPORT NO: 14U19491-E10C DATE: FEBRUARY 25, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 4 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. EUT DESCRIPTION: APPLE WATCH MAGNETIC CHARGING TRY-ON CASE MODEL: A1668 SERIAL NUMBER: CQHP4021G86M (Try-On Case) DATE TESTED: JANUARY 20 – 23 AND FEBRUARY 12, 2015 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Pass INDUSTRY CANADA RSS 102 ISSUE 4 Pass UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By: Calculated By: MENGISTU MEKURIA TONY WANG SENIOR ENGINEER WISE LAB ENGINEER UL Verification Services Inc. UL Verification Services Inc. REPORT NO: 14U19491-E10C DATE: FEBRUARY 25, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 5 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 2. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and IC Safety Code 6. 3. REFERENCES All measurements were made as documented in test report UL Verification Services Inc. Document 14U19491-E9 for operation in the 326.5 KHz band. Output power data is excerpted from the applicable test reports. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 Benicia Street, Fremont, California, USA. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm. REPORT NO: 14U19491-E1…
Text truncated - open the document above for the full version.
FCC 47 CFR PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR APPLE WATCH MAGNETIC CHARGING TRY-ON CASE MODEL NUMBER: A1668 REPORT NUMBER: 14U19491-E9, REVISION A FCC ID: BCGA1668 IC: 579C-A1668 ISSUE DATE: FEBRUARY 19, 2015 Prepared for APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 14U19491-E9A DATE: FEBRUARY 19, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 2 of 36 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By -- 02/12/2015 Initial Review M. Mekuria A 02/19/2015 Address TCB’s questions C. Pang REPORT NO: 14U19491-E9A DATE: FEBRUARY 19, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 3 of 36 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. CALIBRATION AND UNCERTAINTY ................................................................................ 5 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 5 4.2. SAMPLE CALCULATION ............................................................................................ 5 4.3. MEASUREMENT UNCERTAINTY ............................................................................... 6 5. EQUIPMENT UNDER TEST ............................................................................................... 7 5.1. DESCRIPTION OF EUT .............................................................................................. 7 5.2. MAXIMUM OUTPUT POWER...................................................................................... 7 5.3. SOFTWARE AND FIRMWARE .................................................................................... 7 5.4. WORST-CASE CONFIGURATION AND MODE .......................................................... 7 5.5. DESCRIPTION OF TEST SETUP ................................................................................ 8 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................10 7. OCCUPIED BANDWIDTH .................................................................................................11 8. RADIATED EMISSION TEST RESULTS...........................................................................13 8.1. LIMITS AND PROCEDURE ........................................................................................13 8.2. TX FUNDAMENTAL FROM 0.15 TO 30 MHz .............................................................14 8.2.1. CONFIGURATION 1 ............................................................................................14 8.2.2. CONFIGURATION 2 ............................................................................................15 8.3. TX SPURIOUS EMISSIONS FROM 0.15 TO 30 MHz .................................................16 8.3.1. CONFIGURATION 1 ............................................................................................16 8.3.2. CONFIGURATION 2 ............................................................................................17 8.4. TX SPURIOUS EMISSION 30 TO 1000 MHz .............................................................18 8.4.1. CONFIGURATION 1 ............................................................................................18 8.4.2. CONFIGURATION 2 ............................................................................................21 9. AC MAINS LINE CONDUCTED EMISSIONS ....................................................................24 9.1.1. CONFIGURATION 1 ............................................................................................25 9.1.2. CONFIGURATION 2 ............................................................................................28 10. SETUP PHOTOS ...........................................................................................................31 REPORT NO: 14U19491-E9A DATE: FEBRUARY 19, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 4 of 36 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. EUT DESCRIPTION: APPLE WATCH MAGNETIC CHARGING TRY-ON CASE MODEL: A1668 SERIAL NUMBER: CQHP4021G86M (Try-On Case) DATE TESTED: JANUARY 20 – 23 AND FEBRUARY 12, 2015 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 15 SUBPART C RSS-210 Issue 8 Pass Pass UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report …
Text truncated - open the document above for the full version.
REPORT NO: 14U19491-E9A DATE: FEBRUARY 19, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 31 of 36 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 10. SETUP PHOTOS RADIATED EMISSION BELOW 30 MHz RADIATED EMISSIONS BELOW 30MHz (FRONT – STANDBY) RADIATED EMISSIONS BELOW 30MHz (BACK – STANDBY) REPORT NO: 14U19491-E9A DATE: FEBRUARY 19, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 32 of 36 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. RADIATED EMISSIONS BELOW 30MHz (FRONT – OPERATING) RADIATED EMISSIONS BELOW 30MHz (BACK – OPERATING) REPORT NO: 14U19491-E9A DATE: FEBRUARY 19, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 33 of 36 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. RADIATED EMISSION ABOVE 30 MHz RADIATED EMISSIONS ABOVE 30 MHz (FRONT – STANDBY) RADIATED EMISSIONS ABOVE 30 MHz (BACK – STANDBY) REPORT NO: 14U19491-E9A DATE: FEBRUARY 19, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 34 of 36 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. RADIATED EMISSIONS ABOVE 30 MHz (FRONT – OPERATING) RADIATED EMISSIONS ABOVE 30 MHz (BACK – OPERATING) REPORT NO: 14U19491-E9A DATE: FEBRUARY 19, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 35 of 36 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. AC MAINS LINE CONDUCTED EMISSION LINE CONDUCTED EMISSION (FRONT – STANDBY) LINE CONDUCTED EMISSION (BACK - STANDBY) REPORT NO: 14U19491-E9A DATE: FEBRUARY 19, 2015 FCC ID: BCGA1668 IC: 579C-A1668 Page 36 of 36 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. END OF REPORT LINE CONDUCTED EMISSION (FRONT – OPERATING) LINE CONDUCTED EMISSION (BACK – OPERATING)
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 0.3265 MHz - 0.3265 MHz | - |
Smartphone
Equipment Class
6VL - 15E 6 GHZ Very Low Power DeviceMagnetic Charging Cable
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzMagnetic Charger
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzMagnetic Charger
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzSmartphone
Equipment Class
PCE - PCS Licensed Transmitter held to ear