BCGA2251MacBook Pro

Important safety information for your Mac WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injuries, or damage to your MacBook Pro or other property. Read all safety information below before using your MacBook Pro. Built-in battery. Donʼt attempt to replace or remove the battery yourself—you may damage the battery, which could cause overheating and injury. The built-in battery should be replaced by Apple or an authorized service provider, and must be recycled or disposed of separately from household waste. Dispose of batteries according to your local environmental laws and guidelines. Donʼt expose your MacBook Pro to extreme heat sources, such as radiators or fireplaces, where temperatures might exceed 212°F (100°C). For information about battery service and recycling, go to . Handling. Handle your MacBook Pro with care. It is made of metal, glass, and plastic and has sensitive electronic components inside. Place your MacBook Pro on a stable work surface that allows for adequate air circulation under and around the computer. Your MacBook Pro can be damaged if dropped, burned, punctured, or crushed, or if it comes in contact with liquids, oils, and lotions. Donʼt use a damaged MacBook Pro, such as one with a cracked screen, as it may cause injury. Liquid exposure. Keep your MacBook Pro away from sources of liquid, such as drinks, oils, lotions, sinks, bathtubs, shower stalls, and so on. Protect your MacBook Pro from dampness, humidity, or wet weather, such as rain, snow, and fog. Charging. Charge your MacBook Pro only with the included 61W Power Adapter or 96W Power Adapter and USB-C Charge Cable, or with a third-party power adapter and cable that are compatible with USB-C and compliant with applicable international and regional regulations and safety standards, including IEC 60950-1. Other power adapters might not meet applicable safety standards, and charging with such power adapters could pose a risk of death or injury. Using damaged power adapters or cables, or charging when moisture is present, can cause fire, electric shock, injury, or damage to your MacBook Pro or other property. When you use the included 61W Power Adapter or 96W Power Adapter and USB-C Charge Cable to charge your MacBook Pro, make sure the USB-C Charge Cable is fully inserted into the power adapter before you plug the power adapter into a power outlet. Safety, handling, and regulatory information Battery Service and Recycling Prolonged heat exposure. Your MacBook Pro and its 61W Power Adapter or 96W Power Adapter may become very warm during normal use. The MacBook Pro and its 61W Power Adapter or 96W Power Adapter comply with applicable surface temperature standards and limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950-1). However, even within these limits, sustained contact with warm surfaces for long periods of time may cause discomfort or injury. To reduce the possibility of overheating or heat-related injuries, always allow adequate ventilation around the MacBook Pro or 61W Power Adapter or 96W Power Adapter and use care when handling them. Use common sense to avoid situations where your skin is in prolonged contact with a device or its power adapter when itʼs operating or plugged into a power source. For example, donʼt sleep with a device or power adapter when itʼs plugged into a power source. Do not place the device or power adapter under a blanket, pillow, or your body when the device or adapter is connected to a power source. Never push anything into the ventilation openings, as doing so may be dangerous and cause your computer to overheat. Never place anything over the keyboard when operating your MacBook Pro. If your MacBook Pro is on your lap and gets uncomfortably warm, remove it from your lap and place it on a stable, well-ventilated work surface. Take special care if you have a physical condition that affects your ability to detect heat against the body. 61W Power Adapter or 96W Power Adapter. To operate the 61W Power Adapter or 96W Power Adapter safely and reduce the possibility of heat-related injury or damage, do one of the following: Plug the 61W Power Adapter or 96W Power Adapter directly into a power outlet. If youʼre using the Power Adapter Extension Cable, place the power adapter on a desk, table, or on the floor in a well-ventilated location. Donʼt use your MacBook Pro or its power adapter in wet locations, such as near a sink, bathtub, or shower stall, and donʼt connect or disconnect the power adapter with wet hands. Unplug the power adapter and disconnect any cables if any of the following conditions exists: The USB-C cable or power cord has become frayed or damaged. The plug part of the 61W Power Adapter or 96W Power Adapter, the prongs, or the adapter case have become damaged. Your MacBook Pro or 61W Power Adapter or 96W Power Adapter has been dropped. Your MacBook Pro or 61W Power Adapter or 96W Power Adapter is exposed to rain, liquid, or excessive moisture. You suspect the MacBook Pro or 61W Power Adapter or 96W Power Adapter needs service or repair. You want to clean the MacBook Pro or 61W Power Adapter or 96W Power Adapter (use only the recommended procedure, described in ). If debris gets onto the power port, remove it gently with a dry cotton swab. 61W USB-C Power Adapter specifications: Frequency: 50 to 60 Hz, single phase Line Voltage: 100 to 240 V (USB-PD) Output Voltage: 20.3VDC/3A or 15VDC/3A or 9VDC/3A or 5.2VDC/3A 96W USB-C Power Adapter specifications: Frequency: 50 to 60 Hz, single phase Line Voltage: 100 to 240 V (USB-PD) Output Voltage: 20.5VDC/4.7A or 15VDC/3A or 9VDC/3A or 5.2VDC/3A Take special care if you have a physical condition that affects your ability to detect heat against the body. Hearing loss. Listening to sound at high volumes may damage your hearing. Background noise, as well as continued exposure to high volume levels, can make sounds seem quieter than…

Text truncated - open the document above for the full version.

Review the MacBook Pro Essentials guide before using your MacBook Pro. View the guide at support.apple.com/guide/macbook-pro or download it from Apple Books (where available). Retain documentation for future reference. Safety and Handling See “Safety, handling, and regulatory information” in the MacBook Pro Essentials guide. Avoid Hearing Damage To prevent possible hearing damage, do not listen at high volume levels for long periods. More information about sound and hearing is available online at www.apple.com/sound. Medical Device Interference MacBook Pro contains magnets that may interfere with medical devices. See “Important safety information” in the MacBook Pro Essentials guide. Prolonged Heat Exposure Your MacBook Pro may become very warm during normal use. It’s important to keep your MacBook Pro on a hard, stable, and well-ventilated work surface when in use or charging. Use common sense to avoid situations where your body is in prolonged contact with a device or its power adapter when it’s operating or plugged into a power source, as sustained contact with warm surfaces may cause discomfort or injury. Take special care if you have a physical condition that affects your ability to detect heat against the body. Regulatory Information Regulatory certification information is available on-device. Choose Apple menu  > About This Mac > Support > Regulatory Certification. Additional regulatory information is in “Safety, handling, and regulatory information” in the MacBook Pro Essentials guide. FCC and ISED Canada Compliance This device complies with part 15 of the FCC Rules and ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EU Compliance Apple Inc. hereby declares that this wireless device is in compliance with Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available at www.apple.com/euro/compliance. Apple’s EU representative is Apple Distribution International Ltd., Hollyhill Industrial Estate, Cork, Ireland. Use Restriction This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range. This restriction applies in: AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK. ENERGY STAR® Compliance As an ENERGY STAR partner, Apple has determined that standard configurations of this product meet the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR program is a partnership with electronic equipment manufacturers to promote energy-efficient products. Reducing energy consumption of products saves money and helps conserve valuable resources. This computer is shipped with power management enabled, with the computer set to sleep after 10 minutes of user inactivity. To wake your computer, click the trackpad or press any key on the keyboard. For more information about ENERGY STAR, visit www.energystar.gov. Disposal and Recycling Information The symbol above indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines. For information about Apple’s recycling program, recycling collection points, restricted substances, and other environmental initiatives, visit www.apple.com/ environment. European Union—Disposal Information The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. Built-in Battery Don’t attempt to replace or remove the battery yourself—you may damage the battery, which could cause overheating and injury. The built-in battery should be replaced by Apple or an authorized service provider, and must be recycled or disposed of separately from household waste. Dispose of batteries according to your local environmental laws and guidelines. For information about battery recycling and replacement, go to www.apple.com/ batteries/service-and-recycling. Software License Agreement Use of MacBook Pro constitutes acceptance of the Apple and third-party software license terms found at www.apple.com/legal/sla. Apple One-Year Limited Warranty Summary Apple warrants the included hardware product and accessories against defects in materials and workmanship for one year from the date of original retail purchase. Apple does not warrant against normal wear and tear, nor damage caused by accident or abuse. To obtain service, call Apple or visit an Apple Store or an Apple Authorized Service Provider—available service options are dependent on the country in which service is requested and may be restricted to the original country of sale. Call charges and international shipping charges may apply, depending on the location. Subject to the full terms and detailed information on obtaining service available at www.apple.com/legal/warranty and support.apple.com, if you submit a valid claim under this warranty, Apple will either repair, replace, or refund your hardware device at its own discretion. Warranty benefits are in addition to rights provided under local consumer laws. You may be required to furnish proof of purchase details when making a claim under this warranty. For Australian consumers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other re…

Text truncated - open the document above for the full version.

 One Apple Park Way Cupertino, California 95014 USA v1.0 www.apple.com Date: 16 March 2020 Certification Body Unit 3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Certification Application, Cover Letter – Info Guide Hard Copy Shipment FCC: BCGA2251 To whom it may concern: This letter is to confirm that the info guide containing the Part 15 statement is printed and supplied in box with the product. Sincerely, ___________________ Stuart Thomas Apple Inc. EMEIA Engineering Manager [email protected]

 One Apple Park Way Cupertino, California 95014 USA www.apple.com Date: 16 March 2020 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Equipment Authorization Branch Ref: FCC ID: BCGA2251, Model: A2251 To whom it may concern: I, the undersigned, hereby authorize UL VS Ltd. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL VS Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL VS Ltd. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;  One Apple Park Way Cupertino, California 95014 USA www.apple.com e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Stuart Thomas Apple Inc. EMEIA Engineering Manager [email protected]

 One Apple Park Way Cupertino, California 95014 USA v1.1 www.apple.com Date: 16 March 2020 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality FCC ID: BCGA2251, Model A2251 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Permanent Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams • Schematics • Operational Description • Software Security Description • Tune Up Procedure • Parts list These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device.  One Apple Park Way Cupertino, California 95014 USA v1.1 www.apple.com Short Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Stuart Thomas Apple Inc. EMEIA Engineering Manager [email protected]

A2251 Top Apple Proprietary and Confidential A2251 Bottom Apple Proprietary and Confidential A2251 Left - 2 x USB-C port Apple Proprietary and Confidential A2251 Audio and 2 x USB-C Port Apple Proprietary and Confidential A2251 Front Apple Proprietary and Confidential A2251 Back Apple Proprietary and Confidential A2251 LCD Screen, Keyboard Apple Proprietary and Confidential

Designed by Apple in California Assembled in China Rated 20.2V=-=4.3A or 20.3V==3.0A Model A2251 EMC 3348 FCC ID; BCGA2251 and IC; 579C-A2251 Serial PPPYWSSSCCCC I ' Apple Confidential and Proprietary Note: Canada: The PMN is located at the bottom of the screen on the front of the device A2251- Regulatory Label Location

Battery Battery Battery Multi-touch Trackpad Speaker structures Speaker structures MLB 2 x USB C port Audio Port WF2 antenna structure WF1/BT antenna structure A2251 Internal View 2 x USB C port WF3 antenna structure Apple Proprietary and Confidential A2251 WF1/BT, WF2 and WF3 antenna structure and feed- Front Apple Proprietary and Confidential A2251 WF1/BT, WF2 and WF3 antenna structure and feed- Back Apple Proprietary and Confidential A2251 Right speaker structure- Front Apple Proprietary and Confidential A2251 Right speaker structure- Back Apple Proprietary and Confidential A2251 Left speaker structure- Front Apple Proprietary and Confidential A2251 Left speaker structure- Back Apple Proprietary and Confidential A2251 Headphone jack assembly- Front Apple Proprietary and Confidential A2251 Headphone jack assembly- Back Apple Proprietary and Confidential A2251 MLB with shields- Front Apple Proprietary and Confidential A2251 MLB with shields- Back Apple Proprietary and Confidential A2251 MLB without shields- Front Apple Proprietary and Confidential A2251 MLB without shields- Back Apple Proprietary and Confidential A2251 Multi-touch Trackpad- Front Apple Proprietary and Confidential A2251 Multi-touch Trackpad- Back Apple Proprietary and Confidential A2251 Keyboard- Front Apple Proprietary and Confidential A2251 Keyboard- Back Apple Proprietary and Confidential A2251 Display assembly- Front Apple Proprietary and Confidential A2251 Display assembly- Back Apple Proprietary and Confidential

KDB 865664 D01 SAR Measurement 100MHz to 6GHz FCC 47 CFR part 2 (2.1093) SAR EVALUATION REPORT For Laptop Computer with IEEE 802.11a/b/g/n/ac (MIMO 3x3) and Bluetooth Radio Model: A2251 FCC ID: BCGA2251 REPORT NUMBER UL-SAR-RP13041774JD16A V1.0 ISSUE DATE: 10 MARCH 2020 Prepared for APPLE INC. ONE APPLE PARK WAY CUPERTINO CA 95014-2084, USA Prepared by UL VS LTD UNIT 1-3 HORIZON, KINGSLAND BUSINESS PARK WADE ROAD, BASINGSTOKE, HAMPSHIRE, RG24 8AH, UK TEL: +44 (0) 1256 312000 FAX: +44 (0) 1256 312001 REPORT NO: UL-SAR-RP13041774JD16A V1.0 Issue Date: 10 March 2020 Page 2 of 89 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd. REVISION HISTORY Version Issue Date Revisions Revised By 1.0 10 March 2020 Initial Issue -- REPORT NO: UL-SAR-RP13041774JD16A V1.0 Issue Date: 10 March 2020 Page 3 of 89 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd. 1. Attestation of Test Results ................................................................................................ 4 2. Test Specification, Methods and Procedures .................................................................. 5 2.1. Test Specification 5 2.2. Methods and Procedures Reference Documentation 5 2.3. Definition of Measurement Equipment 5 3. Facilities and Accreditation ............................................................................................... 6 4. SAR Measurement System & Test Equipment ................................................................. 7 4.1. SAR Measurement System 7 4.2. SAR Measurement Procedure 8 4.3. Test Equipment 10 5. Measurement Uncertainty ............................................................................................... 13 5.1. Uncertainty – Freq. < 3 GHz Body Configuration 1g 14 5.2. Uncertainty – Freq. > 3 GHz Body Configuration 1g 15 6. Device Under Test (DUT) Information ............................................................................. 16 6.1. DUT Description 16 6.2. Wireless Technologies 17 6.3. Nominal and Maximum Output power: Wi-Fi 2.4 GHz and Bluetooth 19 6.4. Nominal and Maximum Output power: Wi-Fi 5.0 GHz 20 6.5. Nominal and Maximum Output power: Wi-Fi 2.4 GHz – SDB Mode - Aux Core 2 21 6.6. Nominal and Maximum Output power: Wi-Fi 5.0 GHz – SDB Mode - Aux Core 2 22 7. RF Exposure Conditions (Test Configurations) ............................................................. 23 7.1. Configuration Consideration 23 7.2. SAR Test Exclusion Consideration 23 8. Conducted Output Power Measurements ...................................................................... 24 8.1. RF Output Average Power Measurement: Wi-Fi 2.4 GHz 24 8.2. RF Output Average Power Measurement: Wi-Fi 5.0GHz 25 8.3. RF Output Average Power Measurement: Wi-Fi SDB Mode 30 8.4. RF Output Average Power Measurement: Bluetooth 32 9. Dielectric Property Measurements & System Check ..................................................... 33 9.1. Tissue Dielectric Parameters 33 9.2. System Check 34 9.3. Reference Target SAR Values 34 9.4. Dielectric Property Measurements & System Check Results 35 10. Measurements, Examinations and Derived Results .................................................... 36 10.1. General Comments 36 10.2. Specific Absorption Rate - Test Results - WiFi 37 10.3. Specific Absorption Rate - Test Results - Bluetooth 43 10.4. Specific Absorption Rate - Test Results – SDB (Main & Aux) 44 10.5. SAR Measurement Variability 46 10.6. Highest Standalone Reported SAR 47 11. Simultaneous Transmission Analysis .......................................................................... 48 12. Appendixes .................................................................................................................... 50 12.1. Photos and Ports Location 50 12.2. System Check Plots 58 12.3. SAR Test Plots 65 12.4. Calibration Certificate for E-Field Probes 87 12.5. Calibration Certificate for Dipoles 88 12.6. Tissues-Equivalent Media Recipes 89 TABLE OF CONTENTS REPORT NO: UL-SAR-RP13041774JD16A V1.0 Issue Date: 10 March 2020 Page 4 of 89 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd. 1. Attestation of Test Results Applicant Name Apple Inc. Model A2251 Test Device is A representative test sample Device category Portable Date Tested 03 December 2019 to 12 December 2019 ICNIRP Guidelines Limits for SAR Exposure Characteristics General Population/Localised SAR (Head and trunk) – SAR limit 1.6 W/kg The highest reported SAR values RF Exposure Conditions Equipment Class Licensed DTS U-NII DSS Standalone Body N/A 0.95 W/Kg 1.04W/Kg 0.21 W/Kg Simultaneous Transmission Body N/A 1.24 W/Kg 1.24 W/Kg 1.24 W/Kg Applicable Standards FCC 47 CFR part 2 (2.1093) KDB publication Test Results Pass UL Verification Services Ltd. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties are in accordance with the above standard and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample(s), under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Ltd. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Ltd. will constitute fraud and shall nullify the document. This report must not be used by the client to claim produc…

Text truncated - open the document above for the full version.

REPORT NO: UL-SAR-RP13041774JD16A V1.0 Issue Date: 10 March 2020 Page 58 of 89 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd. 12.2. System Check Plots This appendix contains the following system validation distribution scans. Scan Reference Number Title SYS/001 System Check 2450 MHz Head (Site 60) - 05 12 19 SYS/002 System Check 2450 MHz Head (Site 61) - 02 12 19 SYS/003 System Check 5250 MHz Head (Site 60) - 03 12 19 SYS/004 System Check 5250 MHz Head (Site 60) - 06 12 19 SYS/005 System Check 5600 MHz Head (Site 60) - 09 12 19 SYS/006 System Check 5750 MHz Head (Site 61) - 05 12 19 REPORT NO: UL-SAR-RP13041774JD16A V1.0 Issue Date: 10 March 2020 Page 59 of 89 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd. SYS/001: System Check 2450 MHz Head (Site 60) - 05 12 19 Date: 05/12/2019 DUT: D2450V2;Type: Dipole; Serial: SN725; Communication System: CW UID: 0; Frequency: 2450.0 MHz; Duty Cycle: 1; Medium: HSL 03 12 19 - 2450 5250 5600 5750 5% ; Medium parameters used: f = 2450.0 MHz; σ = 1.83 S/m; εr = 39.5 ; ρ = 1000 kg/m3; No correction Phantom section: Flat; DASY 6 Configuration: - Probe: EX3DV4 - SN7496; ConvF ( 7.69, 7.69, 7.69); Calibrated:28/03/2019 - Sensor-Surface: 1.4 mm; Mother Scan - Electronics: DAE4 - SN1541; Calibrated:14/03/2019 - Phantom Type: ELI V5.0 (20deg probe tilt); Serial: 1252 Area Scan (48x96):Interpolated grid: dx=12.0 mm, dy=12.0 mm Zoom Scan1(30x30x30):Measurement grid: dx=5.0 mm, dy=5.0mm, dz=5.0 mm; Grading Ratio: 1.5; Reference Value = 2.64 V/m; Power Drift = -0.12 dB SAR(1 g) = 2.60 W/kg; SAR(10 g) = 1.20 W/kg REPORT NO: UL-SAR-RP13041774JD16A V1.0 Issue Date: 10 March 2020 Page 60 of 89 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd. SYS/002: System Check 2450 MHz Head (Site 61) - 02 12 19 Date: 02/12/2019 DUT: D2450V2;Type: Dipole; Serial: SN725; Communication System: CW UID: 0; Frequency: 2450.0 MHz; Duty Cycle: 1; Medium: HSL 02 12 19 - 2450 5250 5600 5750 5%; Medium parameters used: f = 2450.0 MHz; σ = 1.83 S/m; εr = 39.5 ; ρ = 1000 kg/m3; No correction Phantom section: Flat; DASY 6 Configuration: - Probe: EX3DV4 - SN7497; ConvF ( 7.52, 7.52, 7.52); Calibrated:18/03/2019 - Sensor-Surface: 1.4 mm; Mother Scan - Electronics: DAE4 - SN1542; Calibrated:13/03/2019 - Phantom Type: ELI V5.0 (20deg probe tilt); Serial: 1177 Area Scan (48x96):Interpolated grid: dx=12.0 mm, dy=12.0 mm Zoom Scan1(30x30x30):Measurement grid: dx=5.0 mm, dy=5.0mm, dz=5.0 mm; Grading Ratio: 1.5; Reference Value = 3.26 V/m; Power Drift = 0 dB SAR(1 g) = 2.68 W/kg; SAR(10 g) = 1.24 W/kg REPORT NO: UL-SAR-RP13041774JD16A V1.0 Issue Date: 10 March 2020 Page 61 of 89 UL VS Ltd. Report. No.: 1.0 This report shall not be reproduced except in full, without the written approval of UL Verification Services Ltd. SYS/003: System Check 5250 MHz Head (Site 60) - 03 12 19 Date: 03/12/2019 DUT: D5GHzV2;Type: Dipole; Serial: SN1222; Communication System: CW UID: 0; Frequency: 5250.0 MHz; Duty Cycle: 1; Medium: HSL 03 12 19 - 2450 5250 5600 5750 …

Text truncated - open the document above for the full version.