BCGA2282Network Adapter

A2282 Safety and Handling A2282 Handling Information Handle A2282 with care. It contains sensitive electronic components, including a battery, and can be damaged, impair functionality, or cause injury if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid. Don’t use a damaged A2282. Don’t open the device, it does not have components that can be updated or maintained by the user. Use this device within a 0 °C to 30 °C temperature range. Cleaning To clean the outside of A2282, use a lint-free cloth. Don’t get moisture in any openings or use aerosol sprays, solvents, or abrasives. Battery Don’t attempt to replace the A2282 lithium-ion backup battery. This could cause injury. Battery Disposal and Recycling Information The lithium-ion batteries in your device should be recycled by Apple or an authorized service provider. For information about Apple lithium-ion batteries, go to www.apple.com/batteries. The symbol above indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines. For information about Apple’s recycling program, recycling collection points, restricted substances, and other environmental initiatives, visit www.apple.com/environment. European Union - Disposal Information The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For information about Apple’s recycling program, recycling collection points, restricted substances, and other environmental initiatives, visit www.apple.com/environment. Apple and the Environment At Apple, we recognize our responsibility to minimize the environmental impacts of our operations and products. Power Supply Charge A2282 with the included USB cable and a USB power adapter, or with other third-party “Made for iPhone” cables and power adapters that are compatible with USB 2.0 or later. Only charge with an adapter that is compliant with the applicable international and regional safety standards. Other adapters may not meet applicable safety standards, and charging with such adapters could pose a risk of death or injury. Using damaged cables or chargers, or charging when moisture is present, can cause fire, electric shock, injury, or damage to A2282 or other property. Network Cables A2282 device is designed to operate with the one (1) provided Category-5 ethernet cable and standard ethernet cables with RJ45 connectors. High-Consequence Activities This device is not intended for use where the failure of the device could lead to death, personal injury, or severe environmental damage. Explosive and Other Atmospheric Conditions Charging or using the A2282 in any area with a potentially explosive atmosphere, such as areas where the air contains high levels of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders), may be hazardous. Exposing A2282 to environments having high concentrations of industrial chemicals may damage or impair A2282 functionality. Obey all signs and instructions. Lightning Cable and Connector Avoid prolonged skin contact with the connector when the Lightning to USB Cable is connected to a power source because it may cause discomfort or injury. Sleeping or sitting on the Lightning connector should be avoided. Support For support and troubleshooting information, contact your Apple representative. Regulatory Compliance Information FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. Changes or modifications to this product not authorized by Apple could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. Exposure to radio frequency energy. The radiated output power of this device meets the limits of FCC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20cm (8 inches) between the equipment and a person's body. Responsible party (contact for FCC matters only): Apple Inc. One Apple Park Way, MS 911-AHW Cupertino, CA 95014 USA www.apple.com/contact EU Compliance Information Apple Inc. hereby declares that this wireless device is in compliance with Directive 2014/53/EU. A copy of the EU Declaration of Conformity i…

Text truncated - open the document above for the full version.

A2282 Safety and Handling A2282 Handling Information Handle A2282 with care. It contains sensitive electronic components, including a battery, and can be damaged, impair functionality, or cause injury if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid. Don’t use a damaged A2282. Don’t open the device, it does not have components that can be updated or maintained by the user. Use this device within a 0 °C to 30 °C temperature range. Cleaning To clean the outside of A2282, use a lint-free cloth. Don’t get moisture in any openings or use aerosol sprays, solvents, or abrasives. Battery Don’t attempt to replace the A2282 lithium-ion backup battery. This could cause injury. Battery Disposal and Recycling Information The lithium-ion batteries in your device should be recycled by Apple or an authorized service provider. For information about Apple lithium-ion batteries, go to www.apple.com/batteries. The symbol above indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines. For information about Apple’s recycling program, recycling collection points, restricted substances, and other environmental initiatives, visit www.apple.com/environment. European Union - Disposal Information The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For information about Apple’s recycling program, recycling collection points, restricted substances, and other environmental initiatives, visit www.apple.com/environment. Apple and the Environment At Apple, we recognize our responsibility to minimize the environmental impacts of our operations and products. Power Supply Charge A2282 with the included USB cable and a USB power adapter, or with other third-party “Made for iPhone” cables and power adapters that are compatible with USB 2.0 or later. Only charge with an adapter that is compliant with the applicable international and regional safety standards. Other adapters may not meet applicable safety standards, and charging with such adapters could pose a risk of death or injury. Using damaged cables or chargers, or charging when moisture is present, can cause fire, electric shock, injury, or damage to A2282 or other property. Network Cables A2282 device is designed to operate with the one (1) provided Category-5 ethernet cable and standard ethernet cables with RJ45 connectors. High-Consequence Activities This device is not intended for use where the failure of the device could lead to death, personal injury, or severe environmental damage. Explosive and Other Atmospheric Conditions Charging or using the A2282 in any area with a potentially explosive atmosphere, such as areas where the air contains high levels of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders), may be hazardous. Exposing A2282 to environments having high concentrations of industrial chemicals may damage or impair A2282 functionality. Obey all signs and instructions. Lightning Cable and Connector Avoid prolonged skin contact with the connector when the Lightning to USB Cable is connected to a power source because it may cause discomfort or injury. Sleeping or sitting on the Lightning connector should be avoided. Support For support and troubleshooting information, contact your Apple representative. Regulatory Compliance Information FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this product not authorized by Apple could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. Responsible party (contact for FCC matters only): Apple Inc. One Apple Park Way, MS 911-AHW Cupertino, CA 95014 USA www.apple.com/contact EU Compliance Informat…

Text truncated - open the document above for the full version.

 Apple Inc. One Apple Park Way Cupertino, CA v1.0 www.apple.com Date: August 30, 2019 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID numbers Model(s) FCC ID A2282 BCGA2282 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Permanent Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams • Electrical Schematic Diagrams • Technical Descriptions • Antenna Gain, Antenna Locations These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Short Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR  Apple Inc. One Apple Park Way Cupertino, CA v1.0 www.apple.com §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

 v1.0 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: August 30, 2019 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Equipment Authorization Branch Ref: FCC ID numbers Model(s) FCC ID A2282 BCGA2282 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product  v1.0 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

A2282 Top Apple Proprietary and Confidential A2282 Front Apple Proprietary and Confidential A2282 Back Apple Proprietary and Confidential A2282 Right Side Ethernet Port and Lightning Connector Apple Proprietary and Confidential A2282 Left Side Ethernet Port Apple Proprietary and Confidential A2282 Bottom Apple Proprietary and Confidential

A2282 Internal View Ethernet PortEthernet Port Antenna MLB Apple Proprietary and Confidential A2282 Speaker assembly - Back A2282 Antenna View - Front Apple Proprietary and Confidential A2282 Antenna View - Back Apple Proprietary and Confidential A2282 MLB with shield - Front Apple Proprietary and Confidential A2282 MLB without shield - Front WiFi-BT Module Apple Proprietary and Confidential A2282 MLB - Back Apple Proprietary and Confidential A2282 Battery Rating Apple Proprietary and Confidential

NVLAP LAB CODE 200065-0 FCC Part 1 Subpart I FCC Part 2 Subpart J RF EXPOSURE REPORT FOR NETWORK ADAPTER MODEL NUMBER: A2282 FCC ID: BCGA2282 REPORT NUMBER: 13109133-E10V2 ISSUE DATE: APRIL 24, 2020 Prepared for APPLE INC. 1 APPLE PARK WAY CUPERTINO, CA 95014 U.S.A. Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 REPORT NO: 13109133-E10V2 DATE: APRIL 24, 2020 FCC ID: BCGA2282 Page 2 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By V1 04/21/2020 Initial Issue Chin Pang V2 04/24/2020 Address TCB’s Questions Chin Pang REPORT NO: 13109133-E10V2 DATE: APRIL 24, 2020 FCC ID: BCGA2282 Page 3 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. MAXIMUM PERMISSIBLE EXPOSURE (LIMITS AND EQUATIONS) ............................... 6 5.1. FCC RULES ................................................................................................................ 6 5.2. EQUATIONS ................................................................................................................ 7 6. RF EXPOSURE RESULTS ................................................................................................. 8 REPORT NO: 13109133-E10V2 DATE: APRIL 24, 2020 FCC ID: BCGA2282 Page 4 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: APPLE INC 1 APPLE PARK WAY, CUPERTINO, CA 95014, U.S.A. EUT DESCRIPTION: NETWORK ADAPTER MODEL: A2282 SERIAL NUMBER: F0TC301FPQD7 (CONDUCTED) F0TC3000PQD7 (RADIATED) DATE TESTED: JANUARY 23, 2020 - FEBRUARY 04, 2020 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Complies UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of the U.S. government. Approved & Released For UL Verification Services Inc. By: Prepared By: Chin Pang Tony Li Senior Engineer Test Engineer CONSUMER TECHNOLOGY DIVISION CONSUMER TECHNOLOGY DIVISION UL Verification Services Inc. UL Verification Services Inc. REPORT NO: 13109133-E10V2 DATE: APRIL 24, 2020 FCC ID: BCGA2282 Page 5 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 2. TEST METHODOLOGY All calculations were made in accordance with FCC Parts 1.1310, 2.1091, 2.1093, KDB 447498 D01 v06, KDB 447498 D03 V01, IEEE Std C95.1-2005, IEEE Std C95.3-2002. 3. REFERENCES All measurements were made as documented in test report UL Verification Services Inc., 13019133-E1V1 &13019133-E2V1 for operation in the 2.4 GHz band. Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 and 47266 Benicia Street, and 47658 Kato Road, Fremont, California, USA. Line conducted emissions are measured only at the 47173 address. The following table identifies which facilities were utilized for radiated emission measurements documented in this report. Specific facilities are also identified in the test results sections. 47173 Benicia Street 47266 Benicia Street 47658 Kato Rd. Chamber A (IC:2324B-1) Chamber D (IC:22541-1) Chamber I (IC: 2324A-5) Chamber B (IC:2324B-2) Chamber E (IC:22541-2) Chamber J (IC: 2324A-6) Chamber C (IC:2324B-3) Chamber F (IC:22541-3) Chamber K (IC: 2324A-1) Chamber G (IC:22541-4) Chamber L (IC: 2324A-3) Chamber H (IC:22541-5) The above test sites and facilities are covered under FCC Test Firm Registration # 208313…

Text truncated - open the document above for the full version.

NVLAP Lab code: 200065-0 CERTIFICATION TEST REPORT Report Number. : 13019133-E2V2 Applicant : APPLE, INC. 1 APPLE PARK WAY CUPERTINO, CA 95014, U.S.A Model : A2282 FCC ID : BCGA2282 EUT Description : NETWORK ADAPTER Test Standard(s) : FCC 47 CFR PART 15 SUBPART C Date Of Issue: April 28, 2020 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 REPORT NO: 13019133-E2V2 DATE: 4/28/2020 FCC ID: BCGA2282 Page 2 of 76 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538; USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT REVISION HISTORY Rev. Issue Date Revisions Revised By V1 4/13/2020 Initial Issue Tony Li V2 4/28/2020 Address TCB’s questions Chin Pang REPORT NO: 13019133-E2V2 DATE: 4/28/2020 FCC ID: BCGA2282 Page 3 of 76 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538; USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT REVISION HISTORY ................................................................................................. 2 1. ATTESTATION OF TEST RESULTS ................................................................................. 5 2. TEST RESULTS SUMMARY .............................................................................................. 6 3. TEST METHODOLOGY ..................................................................................................... 7 4. FACILITIES AND ACCREDITATION ................................................................................. 7 5. DECISION RULES AND MEASUREMENT UNCERTAINTY .............................................. 8 5.1. METROLOGICAL TRACEABILITY ............................................................................. 8 5.2. DECISION RULES ...................................................................................................... 8 5.3. MEASUREMENT UNCERTAINTY .............................................................................. 8 5.4. SAMPLE CALCULATION ........................................................................................... 8 6. EQUIPMENT UNDER TEST ............................................................................................... 9 6.1. EUT DESCRIPTION .................................................................................................... 9 6.2. MAXIMUM OUTPUT POWER...................................................................................... 9 6.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 9 6.4. SOFTWARE AND FIRMWARE .................................................................................... 9 6.5. WORST-CASE CONFIGURATION AND MODE .........................................................10 6.6. DESCRIPTION OF TEST SETUP ...............................................................................11 7. MEASUREMENT METHOD...............................................................................................15 8. TEST AND MEASUREMENT EQUIPMENT ......................................................................16 9. ANTENNA PORT TEST RESULTS ...................................................................................17 9.1. ON TIME AND DUTY CYCLE .....................................................................................17 9.2. 99% BANDWIDTH ......................................................................................................18 9.2.1. 802.11b MODE ....................................................................................................18 9.2.2. 802.11n HT20 MODE ..........................................................................................20 9.3. 6 dB BANDWIDTH ......................................................................................................22 9.3.1. 802.11b MODE ....................................................................................................22 9.3.2. 802.11n HT20 MODE ..........................................................................................24 9.4. OUTPUT POWER.......................................................................................................26 9.4.1. 802.11b MODE ....................................................................................................27 9.4.2. 802.11n HT20 MODE ..........................................................................................28 9.5. AVERAGE POWER ....................................................................................................29 9.5.1. 802.11b MODE ....................................................................................................30 9.5.2. 802.11n HT20 MODE ..........................................................................................30 9.6. POWER SPECTRAL DENSITY ..................................................................................31 9.6.1. 802.11b MODE ....................................................................................................32 9.6.2. 802.11n HT20 MODE ......…

Text truncated - open the document above for the full version.