BCGA2512Beats Studio Buds

SAFETY AND HANDLING Important safety information Handle Beats Studio Buds and case with care. They contain sensitive electronic components, including batteries, and can be damaged, impair functionality, or cause injury if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid or to environments having high concentrations of industrial chemicals, including near evaporating liquified gasses such as helium. Don’t use damaged Beats Studio Buds or case. Bluetooth ® To turn off Bluetooth on Beats Studio Buds, put them in the case and close the lid. Batteries Don’t attempt to replace Beats Studio Buds or case batteries yourself—you may damage the batteries, which could cause overheating and injury. Charging Charge the case with the charging cable and a power adapter or computer. Only charge with an adapter that is compliant with applicable country regulations and international and regional safety standards. Other adapters may not meet applicable safety standards, and charging with such adapters could pose a risk of death or injury. Using damaged cables or chargers, or charging when moisture is present, can cause fire, electric shock, injury, or damage to the case or other property. Prolonged heat exposure Avoid prolonged skin contact with a device, its power adapter, and the charging cable and connector when plugged into a power source, because it may cause discomfort or injury. For example, while the case is charging using the charging cable and a power adapter, don’t sit or sleep on the case, charging cable, connector, or power adapter, or place them under a blanket, pillow, or your body. Take special care if you have a physical condition that affects your ability to detect heat against your body. Hearing loss Listening to sound at high volumes may permanently damage your hearing. Background noise, as well as continued exposure to high volume levels, can make sounds seem English 1 Model: A2512, A2513, A2514 034 - 0 4312- A© 2021 Apple Inc. All rights reserved. The b logo, beats and beats studio buds are trademarks of Beats Electronics, LLC. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Apple Inc. is under license. 79,4 158,8 79,4 79,25 Page 1 Page 20 Apple Proprietary and Confidential quieter than they actually are. Check the volume before inserting Beats Studio Buds in your ear. For more information about hearing loss and how to set a maximum volume limit, see apple.com/sound. WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods. Driving hazard Use of Beats Studio Buds while operating a vehicle is not recommended and is illegal in some areas. Check and obey the applicable laws and regulations on the use of earphones while operating a vehicle. Be careful and attentive while driving. Stop listening to your audio device if you find it disruptive or distracting while operating any type of vehicle or performing any activity that requires your full attention. Choking hazard The small parts included with Beats Studio Buds may present a choking hazard or cause other injury to small children. Keep them away from small children. Medical device interference Beats Studio Buds and case contain components, magnets and radios that emit electromagnetic fields. These electromagnetic fields and magnets may interfere with medical devices, such as pacemakers and defibrillators. Consult your physician and medical device manufacturer for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device and Beats Studio Buds and case. There are many types of medical devices, and manufacturers often provide recommendations on the safe use of their devices around wireless or magnetic products to prevent possible interference. Stop using Beats Studio Buds and case if you suspect they are interfering with your medical device. Skin irritation Beats Studio Buds can lead to skin irritation if not properly cleaned. Clean Beats Studio Buds regularly with a soft lint-free cloth. For additional information on how to clean your device and other tips to avoid skin irritation, go to beatsbydre.com/support. If a skin problem develops, discontinue use. If the problem persists, consult a physician. Electrostatic shock When using Beats Studio Buds in areas where the air is very dry, it is easy to build up static electricity and possible for your ears to receive a small electrostatic discharge from Beats Studio Buds. To minimize the risk of electrostatic discharge, avoid using Beats Studio Buds in extremely dry environments, or touch a grounded unpainted metal object before inserting Beats Studio Buds. Important handling information Discoloration of the charging cable and/or of the charging contacts on your Beats Studio Buds and case after regular use is normal. Dirt, debris, and exposure to moisture may cause discoloration. For information about exposure to liquid and cleaning Beats Studio Buds, the case, and the charging cable, see beatsbydre.com/support. Support For support and troubleshooting information and the latest software downloads, go to beatsbydre.com/support. Disposal and Recycling Information The symbol above indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines. For information about Apple’s recycling program, recycling collection points, restricted substances and other environmental initiatives, visit apple.com/environment/. Battery Disposal Information Dispose of batteries according to your local environmental laws and guidelines. The lithium-ion batteries in your Beats Studio Buds and battery in the case should be serviced or recycled by Apple or an authorized service provider, and disposed of separately from household waste. For i…

Text truncated - open the document above for the full version.

Initial pairing on iPhone With earbuds seated in the case and lid open, hold near unlocked iPhone with Bluetooth on and follow onscreen instructions*. Jumelage initial avec un iPhone Lorsque les écouteurs sont dans leur étui, couvercle ouvert, tenez-les près d’un iPhone déverrouillé avec Bluetooth MD et suivez les consignes à l’écran*. Emparelhamento inicial com um iPhone Com os fones no estojo e a tampa aberta, aproxime o iPhone desbloqueado com o Bluetooth ® ativado e siga as instruções na tela*. Enlace inicial a dispositivos iPhone Con los audífonos in-ear en el estuche y la tapa abierta, sostén el estuche cerca del iPhone desbloqueado con Bluetooth activado y sigue las instrucciones en pantalla. Initial pairing on Android With earbuds seated in the case and lid open, hold near unlocked phone with Bluetooth on and follow onscreen instructions. Jumelage initial sous Android Lorsque les écouteurs sont dans leur étui, couvercle ouvert, tenez-les près d’un iPhone déverrouillé avec Bluetooth MD et suivez les consignes à l’écran. Emparelhamento inicial com um dispositivo Android Com os fones no estojo e a tampa aberta, aproxime o dispositivo desbloqueado com o Bluetooth ativado e siga as instruções na tela. Enlace inicial a dispositivos Android Con los audífonos in-ear en el estuche y la tapa abierta, sostén el estuche cerca del teléfono desbloqueado con Bluetooth activado y sigue las instrucciones en pantalla. Wireless setup for additional devices With earbuds seated in the case and lid open, press the button until LED blinks white. Then choose Beats Studio Buds in the Bluetooth ® menu. Configuration sans fil pour appareils supplémentaires Lorsque les écouteurs sont dans leur étui, couvercle ouvert, appuyez sur le bouton jusqu’à ce que le voyant DEL clignote en blanc. Choisissez ensuite les écouteurs Beats Studio dans le menu Bluetooth MD . Configuração sem fio para outros dispositivos Com os fones no estojo e a tampa aberta, pressione o botão até o LED branco piscar. Em seguida, escolha o Beats Studio Buds no menu Bluetooth. Configuración inalámbrica para otros dispositivos Con los audífonos in-ear en el estuche y la tapa abierta, presiona el botón hasta que la luz LED parpadee en blanco. Luego, selecciona Beats Studio Buds en el menú de Bluetooth ® . Charging Beats Studio Buds are charging when seated in the case with the lid closed. Charge the case using the included USB-C cable. En charge Les écouteurs Beats Studio se rechargent lorsque vous les placez dans leur étui avec le couvercle fermé. Rechargez l’étui à l'aide du câble USB-C fourni. Carregamento O Beats Studio Buds é carregado quando está dentro do estojo com a tampa fechada. Para carregar o estojo, use o cabo USB-C incluso. Carga Los Beats Studio Buds se cargan cuando se encuentran en el estuche con la tapa cerrada. Carga el estuche con el cable USB-C incluido. Solo para México: Favor de leer este instructivo antes de utilizar el equipo. Modelo: A2512, A2513, A2514 © 2021 Apple Inc. All rights reserved. Model: A2512, A2513, A2514. 034-04311-A. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Apple is under license. Android, Google Play and the Google Play logo are trademarks of Google LLC. The Android robot is reproduced or modified from work created and shared by Google and used according to the terms described in the Creative Commons 3.0 Attribution License. IOS is a trademark of Cisco registered in the U.S. and other countries and is used under license. Charging / En charge / Carregando / Cargando Charged / Chargés / Carregado / Cargado Fast Pair requires Android 6.0 or newer device with location and Google Play Service enabled, and Google Account. / Le jumelage rapide requiert un appareil doté d’Android 6.0 ou d’une version plus récente, connecté à un compte Google et sur lequel les services de localisation et Google Play sont activés. / O recurso Pareamento rápido requer um dispositivo Android 6.0 ou mais recente com uma conta do Google, e que o Google Play Services e o compartilhamento de localização estejam ativados. / El enlace rápido requiere un dispositivo Android 6.0 o posterior con la ubicación y Google Play Services. BUTTON LED A2512, A2513, A2514 User Manual 1Apple Proprietary and Confidential

 PCTEST Engineering Laboratory, LLC. Date: March 15 th , 2021 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Equipment Authorization Branch Ref: FCC ID numbers Model(s) FCC ID A2512 BCGA2512 A2513 BCGA2513 To whom it may concern: I, the undersigned, hereby authorize PCTEST Engineering Laboratory, LLC. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by PCTEST Engineering Laboratory, LLC. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing PCTEST Engineering Laboratory, LLC. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted;  PCTEST Engineering Laboratory, LLC. d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

 Apple Inc. One Apple Park Way Cupertino, CA v1.0 www.apple.com Date: March 15 th , 2021 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID numbers Model(s) FCC ID A2512 BCGA2512 A2513 BCGA2513 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Permanent Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams • Electrical Schematic Diagrams • Technical Descriptions, Product Specifications • Antenna Gain, Antenna Locations. These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Short Term Confidentiality  Apple Inc. One Apple Park Way Cupertino, CA v1.0 www.apple.com In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

A2512 Front View A2513 Front View A2512 Back View A2513 Back View A2512 T op Side A2513 Top Side A2512 Bottom Side A2513 Bottom Side A2512 Inwards View A2513 Inwards View A2512 Outwards View A2513 Outwards View

Apple A2512 China PPPYWSSSEEEE Compliance Text / Font Size - (1:1) Apple A2512 China PPPYWSSSEEEE Apple A2513 China PPPYWSSSEEEE PPlalaccemeemennt (1:1)t (1:1) 5.05mm 1.35mm LEFTLEFTRIGHTRIGHT SN: PPPYWSSSEEEE Vendor to replace PPPYWSSSEEEE with variable number Left: 1:1 modified for laser etchRight: 1:1 modified for laser etch Serial Number Spec: Font: Myriad Pro Set Thin, 2.0 pt. Character Height = 0.48 mm max cap height, with space added between numbers: 0.08mm 5.05mm 1.35mm Apple A2513 China PPPYWSSSEEEE CENTER CENTERCENTER A2512 , A2513 Label Artwork The Product PMN can be found in the User Guide Apple Proprietary and Confidential The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Apple Inc. is under license. Google Play and the Google Play logo are trademarks of Google LLC. FCC ID: BCGA2512 FCC ID: BCGA2513 IC: 579C-A2512 IC: 579C-A2513 beats by dr. dre Made in China Model: A2512, A2513, A2514 Apple Inc. One Apple Park Way Cupertino, CA 95014 USA Beats Studio Buds UPC 28 x 23mm A2512 A2513 A2514 Packaging Label Artwork Apple Proprietary and Confidential Apple Proprietary and Confidential

A2512 Front View of Antenna/MLB open A2513 Front View of Antenna/MLB O pen A2512 MLB - Front A2513 MLB - Front A2512 MLB - Back A2513 MLB - Back

FCC ID: BCGA2512 SAR EVALUATION REPORT Approved by: Quality Manager Document S/N: Test Dates: DUT Type: Page 1 of 21 1C2104130029-03 (Rev 1).BCG 04/05/2021 – 04/08/2021 Wireless Earbud © 2021 PCTEST REV 21.4 M 09/11/2019 © 2021 PCTEST All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Date of Testing: Apple Inc. 04/05/2021- 04/08/2021 One Apple Park Way Test Site/Location: Cupertino, CA 95014 PCTEST Lab, Morgan Hill, CA, USA Document Serial No.: 1C2104130029-03 (Rev 1).BCG FCC ID: BCGA2512 APPLICANT: APPLE, INC. DUT Type: Wireless Earbuds Application Type: Certification FCC Rule Part(s): CFR §2.1093 Model: A2512 Note: This revised Test Report supersedes and replaces the previously issued test report on the same subject device for the same type of testing as indicated. Please discard or destroy the previously issued test report(s) and dispose of it accordingly. This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures specified in Section 1.6 of this report; for North American frequency bands only. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. The SAR Tick is an initiative of the Mobile & Wireless Forum (MWF). While a product may be considered eligible, use of the SAR Tick logo requires an agreement with the MWF. Further details can be obtained by emailing: [email protected]. 1g Head (W/kg) 1g Body-Worn (W/kg) DSS/DTS Bluetooth 2402 - 2480 MHz 0.23 0.30 Equipment Class Band & Mode Tx Frequency SAR PCTEST 18855 Adams Court, Morgan Hill, CA 95037, USA Tel. +1.410.290.6652 / Fax +1.410.290.6654 http://www.pctest.com SAR EVALUATION REPORT FCC ID: BCGA2512 SAR EVALUATION REPORT Approved by: Quality Manager Document S/N: Test Dates: DUT Type: Page 2 of 21 1C2104130029-03 (Rev 1).BCG 04/05/2021 – 04/08/2021 Wireless Earbud © 2021 PCTEST REV 21.4 M 09/11/2019 © 2021 PCTEST All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1 DEVICE UNDER TEST .................................................................................................................................3 2 INTRODUCTION ...........................................................................................................................................5 3 DOSIMETRIC ASSESSMENT ......................................................................................................................6 4 TEST CONFIGURATION POSITIONS..........................................................................................................7 5 RF EXPOSURE LIMITS ................................................................................................................................8 6 FCC MEASUREMENT PROCEDURES ........................................................................................................9 7 RF CONDUCTED POWERS ...................................................................................................................... 10 8 SYSTEM VERIFICATION ........................................................................................................................... 12 9 SAR DATA SUMMARY .............................................................................................................................. 14 10 SAR MEASUREMENT VARIABILITY ........................................................................................................ 16 11 EQUIPMENT LIST ...................................................................................................................................... 17 12 MEASUREMENT UNCERTAINTIES.......................................................................................................... 18 13 CONCLUSION ............................................................................................................................................ 19 14 REFERENCES ........................................................................................................................................... 20 APPENDIX A: SAR TEST PLOTS APPENDIX B: SAR DIPOLE VERIFICATION PLOTS APPENDIX C: SAR TISSUE SPECIFICATIONS APPENDIX D: SAR SYSTEM VALIDATION APPENDIX E: DUT ANTENNA DIAGRAM & SAR TEST SETUP PHOTOGRAPHS APPENDIX F: PROBE AND DIPOLE CALIBRATION CERTIFICATION FCC ID: BCGA2512 SAR EVALUATION REPORT Approved by: Quality Manager Document S/N: Test Dates: DUT Type: Page 3 of 21 1C2104130029-03 (Rev 1).BCG 04/05/2021 – 04/08/2021 Wireless Earbud © 2021 PCTEST REV 21.4 M 09/11/2019 © 2021 PCTEST All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in …

Text truncated - open the document above for the full version.

FCC ID: BCGA2512 IC: 579C-A2512 MEASUREMENT REPORT (CERTIFICATION) Approved by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 1 of 59 1C2104130029-01.BCG 04/02/2021 - 04/14/2021 Wireless Earbud © 2021 PCTEST V 10.3 11/16/2020 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Apple Inc. One Apple Park Way Cupertino, CA 95014 United States Date of Testing: 04/02/2021 - 04/14/2021 Test Site/Location: PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.: 1C2104130029-01.BCG FCC ID: BCGA2512 IC: 579C-A2512 APPLICANT: Apple Inc. Application Type: Certification Mode/HVIN: A2512 EUT Type: Wireless Earbud Max. RF Output Power: 13.397mW (11.27dBm) Peak Conducted Frequency Range: 2402 – 2480MHz Type of Modulation: GFSK, /4-DQPSK, 8DPSK FCC Classification: FCC Part 15 Spread Spectrum Transmitter (DSS) FCC Rule Part(s): Part 15 Subpart C (15.247) ISED Specification: RSS-247 Issue 2 Test Procedure(s): ANSI C63.10-2013 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT FCC PART 15.247 / ISED RSS-247 Bluetooth FCC ID: BCGA2512 IC: 579C-A2512 MEASUREMENT REPORT (CERTIFICATION) Approved by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 2 of 59 1C2104130029-01.BCG 04/02/2021 - 04/14/2021 Wireless Earbud © 2021 PCTEST V 10.3 11/16/2020 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1.0 INTRODUCTION ...........................................................................................................................................3 1.1 Scope ................................................................................................................................................................... 3 1.2 PCTEST Test Location ......................................................................................................................................... 3 1.3 Test Facility / Accreditations ................................................................................................................................. 3 2.0 PRODUCT INFORMATION ...........................................................................................................................4 2.1 Equipment Description ......................................................................................................................................... 4 2.2 Device Capabilities ............................................................................................................................................... 4 2.3 Antenna Description ............................................................................................................................................. 5 2.4 Test Support Equipment ....................................................................................................................................... 5 2.5 Test Configuration ................................................................................................................................................ 5 2.6 Software and Firmware ........................................................................................................................................ 5 2.7 EMI Suppression Device(s)/Modifications ............................................................................................................ 5 3.0 DESCRIPTION OF TESTS ...........................................................................................................................6 3.1 Evaluation Procedure ........................................................................................................................................... 6 3.2 AC Line Conducted Emissions ............................................................................................................................. 6 3.3 Radiated Emissions .............................................................................................................................................. 7 3.4 Environmental Conditions ..................................................................................................................................... 7 4.0 ANTENNA REQUIREMENTS .......................................................................................................................8 5.0 MEASUREMENT UNCERTAINTY ................................................................................................................9 6.0 TEST EQUIPMENT CALIBRATION DATA .......................................................................…

Text truncated - open the document above for the full version.

Apple Inc. FCC ID: BCGA2512, IC: 579C-A2512 Model: A2512 Test Set-Up Photos EUT Type: W…

Text truncated - open the document above for the full version.