BCGA2903Apple iPad

 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: September 19, 2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046d Attn: Equipment Authorization Branch Ref: FCC ID numbers To whom it may concern: I, the undersigned, hereby authorize Element Materials Technology to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Element Materials Technology on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Element Materials Technology as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; Model(s) FCC ID A2902 BCGA2902 A2903, A2904 BCGA2903 A2898 BCGA2898 A2899, A2900 BCGA2899  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

Apple Park, Cupertino, CA 95014 September 19, 2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: BCGA2902, BCGA2903, BCGA2898, BCGA2899 Apple Inc. (“Apple”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Apple certifies that, as of the date of the filing of the application, Apple is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

Apple Park, Cupertino, CA 95014 September 19, 2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: BCG To whom it may concern: Apple Inc. (“Apple”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above referenced grantee code. Apple acknowledges that it will maintain an agent for no less than one year after Apple has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Apple further acknowledges its responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Contact person: Abhishek Rala Company name: Apple Inc. FCC FRN: 0005899216 Company Address: One Apple Park Way, Cupertino, CA 95014 Email: [email protected] Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: September 19, 2023 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID numbers To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Long-Term Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams • Electrical Schematic Diagrams • Technical Descriptions, Product Specifications • Antenna Gain, Antenna Locations • Tune-up Procedure • Software Security Description These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this Model(s) FCC ID A2902 BCGA2902 A2903, A2904 BCGA2903 A2898 BCGA2898 A2899, A2900 BCGA2899  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Short-Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

A2903, A2904 Label Information Label Location The device has an integrated display screen that supports electronic labeling. The regulatory information is programmed in a secured manner such that neither users or third parties cannot modify it. Electronic Label Instructions to UserRegulatory Regulatory certification information is available on-device. Go to Settings > General > Legal & Regulatory. Additional regulatory information is in “Safety, handling, and support” in the iPad User Guide. One Apple Park Way, Cupertino, CA 95014 USA Packaging LabelThe following regulatory information is also printed on the packaging A2903 FCC ID: BCGA2903 IC: 579C-A2903 A2904 FCC ID: BCGA2903 IC: 579C-A2903 One Apple Park Way, Cupertino, CA 95014 USA

FCC ID: BCGA2903 COMPLIANCE SUMMARY REPORT Approved by: Technical Manager Document S/N: DUT Type: Page 1 of 10 1C2311270064-04.BCG Tablet Device Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. ELEMENT MATERIALS TECHNOLOGY (formerly PCTEST) 18855 Adams Ct, Morgan Hill, CA 95037 USA Tel. +1.408.538.5600 http://www.element.com COMPLIANCE SUMMARY REPORT Applicant Name: Test Site/Location: Apple, Inc. Element, Morgan Hill, CA, USA One Apple Park Way Document Serial No.: Cupertino, CA 95014 USA 1C2311270064-04.BCG F C C I D : BCG A2903 A P P L I C A N T : APPLE, I N C. Report Type: DUT Type: Compliance Summary Tablet Device Model: A2903, A2904 FCC ID: BCGA2903 COMPLIANCE SUMMARY REPORT Approved by: Technical Manager Document S/N: DUT Type: Page 2 of 10 1C2311270064-04.BCG Tablet Device Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. TABLE OF CONTENTS 1 STRATEGY FOR COMPLIANCE DEMONSTRATION 3 1.1 RF Exposure Evaluation Strategy 3 1.2 Nomenclature 4 1.3 Bibliography 4 2 TIME AVERAGING ALGORITHM 5 2.1 Algorithm Description 5 2.2 Basic concept of the algorithm 6 2.3 Configurable Parameters 8 3 DUT DESCRIPTION 9 3.1 Device Overview 9 4 COMPLIANCE SUMMARY 10 4.1 RF Exposure Compliance Summary 10 FCC ID: BCGA2903 COMPLIANCE SUMMARY REPORT Approved by: Technical Manager Document S/N: DUT Type: Page 3 of 10 1C2311270064-04.BCG Tablet Device Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. 1 STRATEGY FOR COMPLIANCE DEMONSTRATION 1.1 RF Exposure Evaluation Strategy The FCC RF exposure limits defined based on time-averaged RF exposure. The device under test (DUT) uses the Qualcomm Smart Transmit feature to control and manage transmitting power in real time and to ensure at all times the time-averaged RF exposure is in compliance with the FCC requirement for 3G/4G/5G NR operations. Additionally, this device supports WLAN/BT technologies, but the output power of these modems is not controlled by the smart transmit algorithm. Demonstrating compliance of DUT enabled with Qualcomm Smart Transmit feature is completed in three parts: 0. RF Exposure Compliance Test Report Part 0: SAR Characterization and PD Characterization The SAR and PD Characterization, denoted as SAR Char and PD Char, determines the power limit that meets FCC exposure requirement after accounting for device design related uncertainties for each supported radio configuration and RF exposure usage scenario. The determined power limits will be loaded and stored in the EUT via the Embedded File System (EFS), and then used as inputs for Smart Transmit to operate. For 3G/4G/5G Sub6, SAR Char is derived from SAR test measurements and conducted power measurements to determine P Limit for each technology/band. The P Limit represents the maximum time- averaged power level for the corresponding radio/antenna configuration. 1. RF Exposure Compliance Test Report Part 1: Test in Static Transmission Condition Part 1 demonstrates that DUT meets FCC SAR limits when transmitting at pre-determined maximum time-averaged power level: P Limit for 3G/4G/5G Sub6 NR. The SAR measurement in Part 1 is under static transmission condition. The compliance for WLAN/BT radio is demonstrated at a fixed power level (fixed = maximum RF tune-up level or power-back off level). The exposure from the simultaneous transmission of WLAN/BT is evaluated in Part 1 report. 2. RF Exposure Compliance Test Report Part 2: Test in Dynamic Transmission Condition Part 2 demonstrates compliance in Tx varying transmission conditions and validates Qualcomm Smart Transmit algorithm. The test results reported in Part 2 demonstrates that DUT complies with FCC RF exposure requirement under Tx varying transmission scenarios, thereby validity of Qualcomm Smart Transmit algorithm. FCC ID: BCGA2903 COMPLIANCE SUMMARY REPORT Approved by: Technical Manager Document S/N: DUT Type: Page 4 of 10 1C2311270064-04.BCG Tablet Device Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. 1.2 Nomenclature Applicable Technologies Term Description 3G/4G/5G Sub6 P Limit Power level that corresponds to the exposure design target (SAR_design_target) after accounting for all device design related uncertainties P Max Maximum tune up output power T SAR Defined time averaging window for f < 6 GHz SAR_design_target Target SAR level resulting in maximum time-averaged exposure optimized from total uncertainty SAR Char Table containing Plimit for all technologies 1.3 Bibliography Report Type Report Serial Number SAR Part 0 Test Report 1C2311270064-01.BCG SAR Part 1 Test Report 1C2311270064-02.BCG RF Exposure Part 2 Test Report 1C2311270064-03.BCG FCC ID: BCGA2903 COMPLIANCE SUMMARY REPORT Approved by: Tech…

Text truncated - open the document above for the full version.

FCC ID: BCGA2903 PART 0 SAR CHAR REPORT Approved by: Technical Manager Document S/N: 1C2311270064-01.BCG DUT Type: Tablet Device Page 1 of 11 REV 1.1 04/08/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Date of Testing: Apple, Inc. One Apple Park Way Cupertino, CA 95014 11/29/2023 – 02/25/2024 Test Report Issue Date: 3/27/2024 Test Site/Location: Element, Morgan Hill, CA, USA Document Serial No.: 1C2311270064-01.BCG FCC ID: BCGA2903 APPLICANT: APPLE, INC. Report Type: DUT Type: Part 0 SAR Characterization Tablet Device Model(s): A2903, A2904 I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. Prepared by: WKR0000009761 Reviewed by: WKR0000005825 Element Materials Technology (Formerly PCTEST) 18855 Adams Ct, Morgan Hill, CA 95037 USA Tel. 408.538.5600 http://www.element.com PART 0 SAR CHAR REPORT FCC ID: BCGA2903 PART 0 SAR CHAR REPORT Approved by: Technical Manager Document S/N: 1C2311270064-01.BCG DUT Type: Tablet Device Page 2 of 11 REV 1.1 04/08/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. TABLE OF CONTENTS 1 DEVICE UNDER TEST 3 1.1 Device Overview 3 1.2 Time-Averaging for SAR and Power Density 4 1.3 Nomenclature for Part 0 Report 4 1.4 Bibliography 4 2 SAR AND POWER DENSITY MEASUREMENTS 5 2.1 SAR Definition 5 2.2 SAR Measurement Procedure 5 3 SAR CHARACTERIZATION 7 3.1 DSI and SAR Determination 7 3.2 SAR Design Target 7 3.3 SAR Char 8 13 EQUIPMENT LIST 10 14 MEASUREMENT UNCERTAINTIES 11 FCC ID: BCGA2903 PART 0 SAR CHAR REPORT Approved by: Technical Manager Document S/N: 1C2311270064-01.BCG DUT Type: Tablet Device Page 3 of 11 REV 1.1 04/08/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. 1 DEVICE UNDER TEST 1.1 Device Overview This device uses the Qualcomm ® Gen2 Smart Transmit feature to control and manage transmitting power in real time and to ensure the time-averaged RF exposure is in compliance with the FCC requirement at all times for 3G/4G/5G WWAN operations. Additionally, this device supports WLAN/BT/802.15.4/NB-UNII technologies, but the output power of these modems is not controlled by the Smart Transmit algorithm. Band & Mode Operating Modes Tx Frequency UMTS 850 Data 826.4 - 846.6 MHz UMTS 1750 Data 1712.4 - 1752.6 MHz UMTS 1900 Data 1852.4 - 1907.6 MHz LTE Band 71 Data 665.5 - 695.5 MHz LTE Band 12 Data 699.7 - 715.3 MHz LTE Band 17 Data 706.5 - 713.5 MHz LTE Band 13 Data 779.5 - 784.5 MHz LTE Band 14 Data 790.5 - 795.5 MHz LTE Band 26 (Cell) Data 814.7 - 848.3 MHz LTE Band 5 (Cell) Data 824.7 - 848.3 MHz LTE Band 66 (AWS) Data 1710.7 - 1779.3 MHz LTE Band 4 (AWS) Data 1710.7 - 1754.3 MHz LTE Band 25 (PCS) Data 1850.7 - 1914.3 MHz LTE Band 2 (PCS) Data 1850.7 - 1909.3 MHz LTE Band 30 Data 2307.5 - 2312.5 MHz LTE Band 7 Data 2502.5 - 2567.5 MHz LTE Band 41 Data 2498.5 - 2687.5 MHz LTE Band 48 Data 3552.5 - 3697.5 MHz NR Band n71 Data 665.5 - 695.5 MHz NR Band n12 Data 701.5 - 713.5 MHz NR Band n14 Data 790.5 - 795.5 MHz NR Band n26 (Cell) Data 816.5 - 846.5 MHz NR Band n5 (Cell) Data 826.5 - 846.5 MHz NR Band n70 Data 1697.5 - 1707.5 MHz NR Band n66 (AWS) Data 1712.5 - 1777.5 MHz NR Band n25 (PCS) Data 1852.5 - 1912.5 MHz NR Band n2 (PCS) Data 1852.5 - 1907.5 MHz NR Band n30 Data 2307.5 - 2312.5 MHz NR Band n7 Data 2502.5 - 2567.5 MHz NR Band n41 Data 2506.02 - 2679.99 MHz NR Band n48 Data 3555.0 - 3694.98 MHz NR Band n77 DoD Data 3455.01 - 3544.98 MHz NR Band n77 C Data 3705.0 - 3975.0 MHz 2.4 GHz WLAN Voice/Data 2412 - 2472 MHz 5 GHz WIFI Voice/Data U-NII-1: 5180 - 5240 MHz U-NII-2A: 5260 - 5320 MHz U-NII-2C: 5500 - 5720 MHz U-NII-3: 5745 - 5825 MHz 6 GHz WIFI Voice/Data U-NII-5: 5955 - 6415 MHz U-NII-6: 6435 - 6515 MHz U-NII-7: 6535 - 6875 MHz U-NII-8: 6895 - 7115 MHz Bluetooth Data 2402 - 2480 MHz 802.15.4 Data 2405 - 2475 MHz NB UNII-1 Data 5162 - 5245 MHz NB UNII-3 Data 5733 - 5844 MHz WPT N/A 13.56 MHz FCC ID: BCGA2903 PART 0 SAR CHAR REPORT Approved by: Technical Manager Document S/N: 1C2311270064-01.BCG DUT Type: Tablet Device Page 4 of 11 REV 1.1 04/08/2022 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. 1.2 Time-Averaging for SAR and Power Density This device is enabled with Qualcomm ® Gen2 Smart Transmit algorithm to control and manage transmitting power in real time and to ensure that the time-averaged RF exposure from 3G/4G/5G Sub-6 NR WWAN is in compliance with FCC requirements.…

Text truncated - open the document above for the full version.

FCC ID: BCGA2903 SAR EVALUATION REPORT Approved by: Technical Manager Document S/N: DUT Type: Page 1 of 327 1C2311270064-02.BCG-R1 Tablet Device REV 23.0 12/04/2023 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Date of Testing: Apple Inc. One Apple Park Way Cupertino, CA 95014 USA 11/29/2023 – 02/25/2024 Test Report Issue Date: 03/27/2024 Test Site/Location: Element, Morgan Hill, CA, USA Document Serial No.: 1C2311270064-02.BCG-R1 F C C I D : BCGA2903 A P P L I C A N T : APPLE, I N C. DUT Type: Tablet Device Application Type: Certification FCC Rule Part(s): CFR §2.1093 Models: A2903, A2904 Note: This revised Test Report supersedes and replaces the previously issued test report on the sane subject device for the same type of testing as indicated. Please discard or destroy the previously issued test report(s) and dispose of it accordingly. This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures specified in Section 1.8 of this report; for North American frequency bands only. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. Prepared by: WKR0000009761 Reviewed by: WKR0000005825 The SAR Tick is an initiative of the Mobile & Wireless Forum (MWF). While a product may be considered eligible, use of the SAR Tick logo requires an agreement with the MWF. Further details can be obtained by emailing: [email protected]. SAR 1g Body (W/kg) PCB UMTS 850 826.40 - 846.60 MHz 0.99 PCB UMTS 1750 1712.4 - 1752.6 MHz 0.99 PCB UMTS 1900 1852.4 - 1907.6 MHz 0.99 PCB LTE Band 71 665.5 - 695.5 MHz 0.99 PCB LTE Band 12 699.7 - 715.3 MHz 0.99 PCB LTE Band 17 706.5 - 713.5 MHz N/A PCB LTE Band 13 779.5 - 784.5 MHz 0.99 PCB LTE Band 14 790.5 - 795.5 MHz 0.97 PCB LTE Band 26 (Cell) 814.7 - 848.3 MHz 0.99 PCB LTE Band 5 (Cell) 824.7 - 848.3 MHz 0.99 PCB LTE Band 66 (AWS) 1710.7 - 1779.3 MHz 0.99 PCB LTE Band 4 (AWS) 1710.7 - 1754.3 MHz N/A PCB LTE Band 25 (PCS) 1850.7 - 1914.3 MHz 0.99 PCB LTE Band 2 (PCS) 1850.7 - 1909.3 MHz N/A PCB LTE Band 30 2307.5 - 2312.5 MHz 0.99 PCB LTE Band 7 2502.5 - 2567.5 MHz 0.99 PCB LTE Band 41 2498.5 - 2687.5 MHz 0.99 CBE LTE Band 48 3552.5 - 3697.5 MHz 0.99 PCB NR Band n71 665.5 - 695.5 MHz 0.99 PCB NR Band n12 701.5 - 713.5 MHz 0.99 PCB NR Band n14 790.5 - 795.5 MHz 0.99 PCB NR Band n26 (Cell) 816.5 - 846.5 MHz 0.99 PCB NR Band n5 (Cell) 826.5 - 846.5 MHz 0.99 PCB NR Band n70 1697.5 - 1707.5 MHz 0.99 PCB NR Band n66 (AWS) 1712.5 - 1777.5 MHz 0.99 PCB NR Band n25 (PCS) 1852.5 - 1912.5 MHz 0.99 PCB NR Band n2 (PCS) 1852.5 - 1907.5 MHz N/A PCB NR Band n30 2307.5 - 2312.5 MHz 0.99 PCB NR Band n7 2502.5 - 2567.5 MHz 0.99 PCB NR Band n41 2506.02 - 2679.99 MHz 0.99 CBE NR Band n48 3550 - 3700 MHz 0.99 PCB NR Band n77 DoD 3460.02 - 3540 MHz 0.99 PCB NR Band n77 3710.01 - 3969.99 MHz 0.99 DTS 2.4 GHz WIFI 2412 - 2472 MHz 1.09 NII 5 GHz WIFI U-NII-1: 5180 - 5240 MHz U-NII-2A: 5260 - 5320 MHz U-NII-2C: 5500 - 5720 MHz U-NII-3: 5745 - 5825 MHz 1.09 6CD 6 GHz WIFI U-NII-5: 5935 - 6415 MHz U-NII-6: 6435 - 6515 MHz U-NII-7: 6535 - 6875 MHz U-NII-8: 6895 - 7115 MHz 1.08 DSS/DTS 2.4 GHz Bluetooth 2402 - 2480 MHz 1.09 DTS 802.15.4 2405 - 2475 MHz 1.00 NII NB U-NII 1 5152 - 5245 MHz 1.08 NII NB U-NII 3 5733 - 5844 MHz 1.09 DXX wPT 13.56 MHz <0.1 Simultaneous SAR per KDB 690783 D01v01r03: 1.59 Equipment Class Band & Mode Tx Frequency APD (W/m^2) 6CD 6 GHz WIFI U-NII-5: 5935 - 6415 MHz U-NII-6: 6435 - 6515 MHz U-NII-7: 6535 - 6875 MHz U-NII-8: 6895 - 7115 MHz 7.96 Equipment Class Band & Mode Tx Frequency Reported PD (W/m^2) 6CD 6 GHz WIFI U-NII-5: 5935 - 6415 MHz U-NII-6: 6435 - 6515 MHz U-NII-7: 6535 - 6875 MHz U-NII-8: 6895 - 7115 MHz 6.731 Equipment Class Band & Mode Tx Frequency Element Materials Technology (formerly PCTEST) 18855 Adams Ct, Morgan Hill, CA 95037 USA Tel. +1.408.538.5600 http://www.element.com SAR EVALUATION REPORT FCC ID: BCGA2903 SAR EVALUATION REPORT Approved by: Technical Manager Document S/N: DUT Type: Page 2 of 327 1C2311270064-02.BCG-R1 Tablet Device REV 23.0 12/04/2023 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1 DEVICE UNDER TEST .................................................................................................................................3 2 LTE AND NR INFORMATION .................................................................................................................... 54 3 INTRODUCTION ........................................................................................................................................ 56 4 DOSIMETRIC ASSESSMENT ................................................................................................................... 57 5 TEST CONFIGURATION POSITIONS..................................................................................................…

Text truncated - open the document above for the full version.

A P P E N D I X A : S A R T E S T P L O T S A1 ELEMENT DUT: BCGA2903; Type: Portable Tablet; Serial: YG6XL Communication System: UID:10011 - CAC, WCDMA; MAIA: Y; Frequency: 826.4 MHz Medium: 835 Head; Medium parameters used: f = 826.4 MHz; cond = 0.908 S/m; perm = 42.4; density = 1000 kg/m³ Phantom Section: Flat; Space: 0.00 mm Test Date: 12/02/2023; Ambient Temp: 20.8°C; Tissue Temp: 19.5°C Probe: EX3DV4 - SN7416; ConvF:(9.73,9.73,9.73); Calibrated: 2023-05-08 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn701; Calibrated: 2023-05-11 Phantom: Twin-SAM V8.0; Serial: 2029 Measurement SW: DASY Module SAR V16.2.0.1425 Mode: UMTS 850, Antenna 4, Exp: Body| Back Side, Ch. Low Area Scan (210.0 x 300.0): Measurement grid: dx=15.0 mm, dy=15.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=3.4 mm, dy=3.4 mm, dz=1.4 mm; Graded Ratio: 1.4 Reference Value = 0.70 W/kg; Power Drift = -0.01 dB Peak SAR (extrapolated) = 3.56 W/kg SAR(1 g) = 0.895 W/kg Smallest distance from peaks to all points 3 dB below is 4.1 mm Ratio of SAR at M2 to SAR at M1 = 59.2 % A2 ELEMENT DUT: BCGA2903; Type: Portable Tablet; Serial: L9TJR Communication System: UID:10011 - CAB, WCDMA; MAIA: Y; Frequency: 1752.6 MHz Medium: 1750 Head; Medium parameters used: f = 1752.6 MHz; cond = 1.31 S/m; perm = 38.6; density = 1000 kg/m³ Phantom Section: Flat; Space: 0.00 mm Test Date: 12/04/2023; Ambient Temp: 23.9°C; Tissue Temp: 21.7°C Probe: EX3DV4 - SN7639; ConvF:(8.98,8.98,8.98); Calibrated: 2023-11-09 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1403; Calibrated: 2023-11-14 Phantom: Twin-SAM V8.0; Serial: 2034 Measurement SW: DASY Module SAR V16.2.0.1425 Mode: UMTS 1750, Antenna 2b, Exp: Body| Bottom Edge, Ch. High Area Scan (40.0 x 210.0): Measurement grid: dx=5.0 mm, dy=15.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=3.8 mm, dy=3.8 mm, dz=1.4 mm; Graded Ratio: 1.4 Reference Value = 0.69 W/kg; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.10 W/kg SAR(1 g) = 0.804 W/kg Smallest distance from peaks to all points 3 dB below is 4.6 mm Ratio of SAR at M2 to SAR at M1 = 62.1 % A3 ELEMENT DUT: BCGA2903; Type: Portable Tablet; Serial: DV71P Communication System: UID:10011 - CAB, WCDMA; MAIA: Y; Frequency: 1852.4 MHz Medium: 1900 Head; Medium parameters used: f = 1852.4 MHz; cond = 1.38 S/m; perm = 39.7; density = 1000 kg/m³ Phantom Section: Flat; Space: 0.00 mm Test Date: 12/26/2023; Ambient Temp: 22.6 C; Tissue Temp: 20.7°C Probe: EX3DV4 - SN7357; ConvF:(8.3,8.3,8.3); Calibrated: 2023-04-13 Sensor-Surface: 1.4mm (All points) Electronics: DAE4 Sn1582; Calibrated: 2023-04-14 Phantom: Twin-SAM V8.0; Serial: 1866 Measurement SW: DASY Module SAR V16.2.0.1425 Mode: UMTS 1900, Antenna 4, Exp: Body| Back Side, Ch. Low Area Scan (210.0 x 300.0): Measurement grid: dx=15.0 mm, dy=15.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=3.4 mm, dy=3.4 mm, dz=1.4 mm; Graded Ratio: 1.4 Reference Value = 0.69 W/kg; Power Drift = 0.03 dB Peak SAR (extrapolated) = 2.11 W/kg SAR(1 g) = 0.755 W/kg Smallest distance from peaks to all points 3 dB below is 4.1 mm Ratio of SAR at M2 to SAR at M1 = 77.7 % A4 ELEMENT DUT: BCGA2903; Type: Portable Tablet; Serial: H59RP Communication System: UID:10297 - AAD, LTE-FDD; MAIA: Y; Frequency: 680.5 MHz Medium: 750 Head; Medium paramet…

Text truncated - open the document above for the full version.