BCGA3449

Technical Specifications

#	Rule Parts	Frequency Range	Power Output	Tolerance
1	15E	5.18 GHz - 5.24 GHz	113.00 mW	20ppm
2	15E	5.19 GHz - 5.23 GHz	181.00 mW	20ppm
3	15E	5.21 GHz - 5.21 GHz	34.00 mW	20ppm
4	15E	5.16 GHz - 5.25 GHz	39.00 mW	20ppm
5	15E	5.25 GHz - 5.25 GHz	12.00 mW	20ppm
6	15E	5.26 GHz - 5.32 GHz	112.00 mW	20ppm
7	15E	5.27 GHz - 5.31 GHz	179.00 mW	20ppm
8	15E	5.29 GHz - 5.29 GHz	34.00 mW	20ppm
9	15E	5.50 GHz - 5.70 GHz	133.00 mW	20ppm
1	15E	5.51 GHz - 5.67 GHz	189.00 mW	20ppm
11	15E	5.53 GHz - 5.61 GHz	176.00 mW	20ppm
12	15E	5.57 GHz - 5.57 GHz	23.00 mW	20ppm
13	15E	5.72 GHz - 5.72 GHz	90.00 mW	20ppm
14	15E	5.71 GHz - 5.71 GHz	175.00 mW	20ppm
15	15E	5.69 GHz - 5.69 GHz	186.00 mW	20ppm
16	15E	5.75 GHz - 5.83 GHz	218.00 mW	20ppm
17	15E	5.75 GHz - 5.79 GHz	210.00 mW	20ppm
18	15E	5.78 GHz - 5.78 GHz	140.00 mW	20ppm
19	15E	5.73 GHz - 5.84 GHz	157.00 mW	20ppm

Confidentiality

Long Term

Grant Notes

Output power is maximum conducted. This device operates as both a very-low power (6VL) device and a dual-client (6CD) device with both low-power indoor access points and standard power access points utility for 6 GHz band operations as described in this filing. These modes of operation infer multiple restrictions of usage as detailed in this filing, the User Manual, and KDB 987594. For Dynamic Frequency Selection (DFS) relevant bands, the device operates as a client without radar detection only. This device supports WLAN 802.11 b/g/n/a/ac/ax/be in SISO and MIMO (2x2) configurations with, where applicable, 20, 40, 80, and 160 MHz BW modes and beamforming. The device supports 20MHz puncturing on 80MHz and 160MHz baseline channel size, and 40MHz puncturing in 160MHz baseline channel size in SP mode (Automated Frequency Coordination control is a feature of the Access Point). LPI 'puncturing' mode is only for the purposes of controlling data rate, managing links, power reduction, energy saving, etc as implemented by 802.11, not for incumbent device avoidance. Bluetooth v5.3, including HDR4, HDR8, plus backwards compatibility to v4.x LE and v2.x BR/EDR Specific Absorption Rate testing ensures human safety against a body configuration (1g) and yields the following maximum reported SAR values: standalone 1.09 W/kg, simultaneous operation 1.43 W/kg, against limits for General Population/Uncontrolled Exposure of 1.6 W/kg in accordance with FCC 47 CFR 1.1310. For above 6 GHz, an incidental power density (IPD) of 7.06 W/m2 was measured against a limit of 10.00 W/m2.