BEJ-LNN2010IWUMDIGITAL CAR AVN SYSTEM

Car Navigation System OWNER’S MANUAL SORENTO Please read this manual carefully before operating your set and retain it for future reference. Designs and specifications are subject to change without prior notice. ENGLISH 2 ENG Thank you for purchasing this Car Navigation system. This user’s manual explains how to use the KIA Motor Car Navigation system. Before using the product, read the contents of this user’s manual carefully and use this product safely. • The screens shown in this manual may differ from the actual screens of the product. • The design and specification of this product may change without prior notification for product improvement. • When transferring the vehicle to another individual, include this user’s manual so that the next driver can continue its use. Precautions for safety 3 ENG Safety notes CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving and always be fully aware of all driving conditions. Do not change settings or any functions. Pull over in a safe and legal manner before attempting such operations. To promote safety, certain functions are disabled unless the hand brake is on. To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain or moisture. When driving your vehicle, be sure to keep the volume of the unit low enough to allow you to hear sounds coming from the outside. Do not drop it and avoid heavy impacts at anytime. The driver should not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident. Precautions for safety 4 ENG Precautions for safety WARNING: • Don’t use a cellular phone when you are driving. You must stop at a safe place to use a cellular phone. • The use of the navigation radio by no means relieves the driver of his/her responsibilities. The highway code must always be observed. Always observe the current traffic situation. • The applicable traffic regulations and the prevailing traffic situation always take precedence over the instructions issued by the navigation system if they contradict one another. • For traffic safety reasons, use the navigation system menus only before starting a journey or when the vehicle is stationary. • In certain areas, one-way streets and turn off and entry prohibitions (e.g. pedestrian zones) are not recorded. In areas such as these the navigation system will issue a warning. Pay particular attention to one-way streets and turn off and entry restrictions. • The navigation system does not take the relative safety of the suggested routes into consideration. Road blocks, building sites, height or weight restrictions, traffic or weather conditions or other influences which affect the route safety or travel time are not taken into consideration for the suggested routes. Use your own discretion in order to decide on the suitability of the suggested routes. • The current legal road traffic speed limit always takes priority over the values saved on the data. It is impossible to provide an assurance that the speed values of the navigation system will always match those of the current traffic regulations in every situation. • Always observe the applicable legal speed limits the traffic regulations. The vehicle speedometer must always be given priority for display of the vehicle speed. • Do not rely exclusively on the navigation system when attempting to locate an emergency service (hospital, fire service etc.). It cannot be guaranteed that all available emergency services in your vicinity are saved in the database. Use your own discretion and abilities to secure help in such situations. CAUTION: • Do not keep the navigation system running with the engine stopped. Doing so may discharge the vehicle battery. When you use the navigation system, always keep the engine running. • When the driver wants to operate the navigation system, first park the vehicle in a safe location and set the parking brake. Operating the system while driving can distract the driver and may result in a serious accident. • Do not disassemble or modify this system. If you do, it may result in accidents, fire or electrical shock. • Some states/provinces may have laws limiting the use of video screens while driving. Use the system only where it is legal to do so. • Do not use your phone in private mode when you are driving. You must stop at a safe location to use it. 5 ENG Precautions for safety 3 Safety notes � � � � � � � � � � � � � � � � � � � � � �3 Table of contents 5 General information 7 About USB � � � � � � � � � � � � � � � � � � � � � � �7 MP3 file Information� � � � � � � � � � � � � � � �8 Image file Information � � � � � � � � � � � � � �8 Using iPod Devices � � � � � � � � � � � � � � � � �8 Precautions upon using iPod ...............8 Supported iPod devices ........................8 Cautions upon using SD Cards � � � � � � �8 Ejecting and Inserting SD Cards .........8 Usage of SD Cards .................................8 Name of each component 9 Head unit � � � � � � � � � � � � � � � � � � � � � � � � �9 Steering whe…

Text truncated - open the document above for the full version.

LG Electronics USA. 1000 Sylvan Avenue Englewood Ciliffs, New Jersey, 07632, United States Date: Aug 05, 2015 Attestation Letter for FCCID: BEJ-LNN2010IWUM To whom it may concern: We hereby declare that 1. For WLAN, Bluetooth (BT) function this device uses “RBHA-C215A” chip. The Chip supports WLAN(IEEE 802.11 a/b/g/n), Bluetooth (BT) functions but the WLAN 2.4GHz(IEEE 802.11 b/g/n) and WLAN 5GHz(IEEE 802.11a/n) functions are disabled by software and cannot be enabled by the user. Therefore only the Bluetooth (BT) function of this chip is used in this device. Sincerely, Jongchul Lee Director, NA Regulatory & Environmental Affairs. LG Electronics USA, Inc.

LG Electronics U.S.A 1000 Sylvan Avenue, Englewood Cliffs, New Jersey 07632 Date: August 6, 2015 Letter of Authorization We, the undersigned, hereby authorize Harvey Sung of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCCID: BEJ-LNN2010IWUM including signing of all documents relating to these matters. Any and all acts carried out by Harvey Sung of DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from LG Electronics USA. . “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Jongchul Lee Director, NA Regulatory & Environmental Affairs. LG Electronics USA, Inc.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 Aug. 06, 2015 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, LG Electronics USA. hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (DIGITAL CAR AVN SYSTEM, LNN2010IWUM) FCC ID: BEJ-LNN2010IWUM Sincerely, Client’s signature: Client’s name / title Jongchul Lee/ Director Contact information / address LG Electronics USA. / 1000 Sylvan Avenue Englewood Ciliffs, New Jersey, 07632, United States

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 4.0 Aug. 06, 2015 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: BEJ-LNN2010IWUM We hereby request confidential treatment of information accompanying this application as outlined below: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description - e.g. Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name / title Jongchul Lee/ Director Contact information / address LG Electronics USA. / 21000 Sylvan Avenue Englewood Ciliffs, New Jersey, 07632, United States SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 4.0 Aug. 06, 2015 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: BEJ-LNN2010IWUM To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - e.g. User Manual - e.g. Ext Photo - e.g. Int Photo - e.g. Test Photo The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature: Client’s name / title Jongchul Lee/ Director Contact information / address LG Electronics USA. / 21000 Sylvan Avenue Englewood Ciliffs, New Jersey, 07632, United States

FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015 DT&C Co., Ltd. Page 1 / 3 View 1 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015 DT&C Co., Ltd. Page 2 / 3 View 2 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015 DT&C Co., Ltd. Page 3 / 3 View 3

FCC ID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation of the device. - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label.

FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 1 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 2 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 3 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 4 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 5 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 6 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 7 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 8 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 9 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 10 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 13 < BT Module> FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 14 FCCID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. View 15 <BT>

-~ - -±&dBm ) - - The MPE calculation for this exposure is shown below. ▪=+- =+ == - ▪S=- = = The maximum permissible exposure(MPE) of the general population/Uncontrolled for this device is 1.0 mW/cm 2 . 0.000354 mW/cm 2 EIRP = Equivalent Isotropic Radiated Power(mW) R = Distance to the center of the radiation of the antenna(20cm) Conclusion : The exposure condition of this device is compliant with FCC rules. Power density at the specific separation EIRP / ( 4 R 2 π ) Note 1.779 / ( 4 X 20 2 X π )S = Maximum power dencity(mW/cm 2 ) P = Power input to the antenna(dBm) 2.50dBm1.779mWG = Power gain of the antenna(dBi) The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. EIRPPGNote -1.00dBm3.50dBi -4 Maximum antenna peak gain :3.50dBi Maximum output power for the calculation :-1.00dBm 1.5dB (Max.-1dBmMin. Measured RF output power :-2.04dBm Target Power & Tolerance :-2.50dBm FCCID: BEJ-LNN2010IWUMLG Electronics Inc. MPE Calculations :(Bluetooth) Frequency range :2402MHz2480MHz TRF-RF-206(01)140415 -~ - -±&dBm ) - - The MPE calculation for this exposure is shown below. ▪=+- =+ == - ▪S=- = = MHz MPE Calculations :(Bluetooth) LG Electronics Inc. FCCID: BEJ-LNN2010IWUM Frequency range :2402MHz2480 dBmMin. Measured RF output power :dBm Target Power & Tolerance :dBm -4.62 -5.501.5-7 Maximum antenna peak gain :dBi Maximum output power for the calculation :-4.00dBm dB (Max. 3.50 -4 The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. EIRPPGNote -4.00dBm3.50dBiP = Power input to the antenna(dBm) -0.50dBm0.892mWG = Power gain of the antenna(dBi) Power density at the specific separation EIRP / ( 4 R 2 π ) Note 0.892 / ( 4 X 20 2 X π )S = Maximum power dencity(mW/cm 2 ) The maximum permissible exposure(MPE) of the general population/Uncontrolled for this device is 1.0 mW/cm 2 . 0.000178 mW/cm 2 EIRP = Equivalent Isotropic Radiated Power(mW) R = Distance to the center of the radiation of the antenna(20cm) Conclusion : The exposure condition of this device is compliant with FCC rules. TRF-RF-206(01)140415

FCC ID: BEJ-LNN2010IWUM DTNC1507-03656 Report No.: DRTFCC1508-0180 TRF-237(00)150713 Page 2 / 71 Copyright ○ C 2015, DT&C Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1508-0180 Aug. 13, 2015 Initial issue FCC ID: BEJ-LNN2010IWUM DTNC1507-03656 Report No.: DRTFCC1508-0180 TRF-237(00)150713 Page 3 / 71 Copyright ○ C 2015, DT&C Co., Ltd. Table of Contents 1. General Information ............................................................................................................... 4 1.1 Testing Laboratory .......................................................................................................................... 4 1.2 Details of Applicant ......................................................................................................................... 4 1.3 Description of EUT .......................................................................................................................... 4 1.4 Declaration by the applicant / manufacturer ................................................................................. 5 1.5 Information about the FHSS characteristics ................................................................................. 5 1.6 Test conditions ................................................................................................................................ 5 1.7 Test Equipment List ......................................................................................................................... 6 1.8 Summary of Test Results ................................................................................................................ 7 1.9 Conclusion of worst-case and operation mode ............................................................................ 8 2. Maximum Peak Output Power Measurement ...................................................................... 9 2.1 Test Setup ......................................................................................................................................... 9 2.2 Limit .................................................................................................................................................. 9 2.3 Test Procedure ................................................................................................................................. 9 2.4 Test Results .................................................................................................................................... 10 3. 20 dB BW ............................................................................................................................... 16 3.1 Test Setup ....................................................................................................................................... 16 3.2 Limit ................................................................................................................................................ 16 3.3 Test Procedure ............................................................................................................................... 16 3.4 Test Results .................................................................................................................................... 16 4. Carrier Frequency Separation............................................................................................. 22 4.1 Test Setup ....................................................................................................................................... 22 4.2 Limit ................................................................................................................................................ 22 4.3 Procedure ....................................................................................................................................... 22 4.4 Test Results .................................................................................................................................... 22 5. Number of Hopping Frequencies ....................................................................................... 27 5.1 Test Setup ....................................................................................................................................... 27 5.2 Limit ................................................................................................................................................ 27 5.3 Procedure ....................................................................................................................................... 27 5.4 Test Results .................................................................................................................................... 27 6. Time of Occupancy (Dwell Time) ........................................................................................ 33 6.1 Test Setup ....................................................................................................................................... 33 6.2 Limit ................................................................................................................................................ 33 6.3 Test Procedure ............................................................................................................................... 33 6.4 Test Results .................................................................................................................................... 33 7. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission .......... 38 7.1 Test Setup ....................................................................................................................................... 38 7.2 Limit ................................................................................................................................................ 38 7.3. Test Procedures ..................................................................…

Text truncated - open the document above for the full version.

FCC ID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. Test Setup photographs EUT Position: X-axis FCC ID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (below 1000MHz) FCC ID: BEJ-LNN2010IWUM Copyright Ⓒ 2015, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz)