BEJ-MIBPQMINMIB2 Entry

CONFIDENTIAL not for distribution CONFIDENTIAL not for distribution Composition Touch, Composition Colour Radio Composition Touch, Composition Colour: Radio Stand: 21.08.2013 Englisch: 11.2013 Artikel-Nr.: 142.5R6.RCT.20  1425R6RCT20 CONFIDENTIAL not for distribution CONFIDENTIAL not for distribution Description of symbols  Refers to a section within a chapter that contains important information and safety notes  that should always be observed.  Indicates that the section is continued on the next page.  Indicates the end of a section.  Indicates situations in which the vehicle must be stopped as quickly as possible. ® ™Indicates a registered trademark. Howev- er , the absence of this symbol does not constitute a waiver of the rights concern- ing any term. ⇒ Symbols like these refer you to warnings within the same section or on a given page. They draw your attention to possi- ble risks of accident or injury and explain how they can be avoided. ⇒ ⇒ ⇒ Cross reference to information about pos- sible damage to your vehicle within the same section or on a given page. DANGER Texts with this symbol indicate dangerous situations which will lead to fatal or severe in- juries if you do not observe the warning. WARNING Texts with this symbol indicate dangerous situations which could lead to fatal or severe injuries if you do not observe the warning. CAUTION Texts with this symbol indicate dangerous situations which could lead to slight or se- vere injuries if you do not observe the warn- ing. NOTICE Texts with this symbol indicate situations which could cause damage to the vehicle or ve- hicle equipment if you do not observe the warning. Texts with this symbol contain additional in- formation on the protection of the environ- ment. Texts with this symbol contain additional in- formation. Volkswagen AG works continuously to develop and further improve all models. Please understand that we must therefore reserve the right to alter any part of the vehicle and its equipment or technical specifications at any time. The data provided con- cerning scope of delivery , appearance, perform- ance, dimensions, weights, fuel consumption, standards and vehicle functions are all correct at the time of going to print. Some of the equipment described might not yet be available in a particular vehicle (information can be provided by your local Volkswagen dealership), and some equipment may not be available in certain countries. No legal com- mitment may be inferred from the information, illus- trations or descriptions in this manual. No part of this manual may be reprinted, repro- duced or translated without the written permission of Volkswagen AG. All rights under the laws of copyright are expressly reserved by Volkswagen AG. Subject to alteration and amendment. Printed in Germany. © Volkswagen AG 2013 This paper was bleached without the use of chlorine. FCC Compliance Statement [Level 4] <North America> This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn-ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. <Canada> This Class B digital apparatus complies with Canadian ICES-003 “To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.” Cet appareil numérique de la classe B est conforme à la norme NMB-003 «Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.» Operation is subject to the following two conditions : (1) This device may not cause Interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Bluetooth Specification StandardBluetooth Version 4.0 Frequency Range2400 ~ 2483.5 MHz Output Power (Max.)+4 dBm Max. CONFIDENTIAL not for distribution About this manual ● An alphabetical index is included at the end of this manual. ● A list of abbreviations explains technical abbre- viations and terms. ● Directions and positions (e.g. right, left, front, rear) are normally relative to the vehicle's direction of travel. ● Illustrations help with orientation and should be regarded as a general guide. ●In right-hand drive vehicles the controls may sometimes be …

Text truncated - open the document above for the full version.

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 4.0 LG Electronics USA (December 21, 2015) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: BEJ-MIBPQMIN We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description - Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ______________________________ Client’s signature : LG Electronics USA Client’s name / title : Jongchul, Lee/ Director, Standards & Compliance Contact information / address : 1000 Sylvan Avenue, Englewood Cliffs, New Jersey, United States, 7632 Telephone: +201-408-9181 Fax No.: +201-816-2003 E-mail: [email protected] SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 4.0 LG Electronics USA (December 21, 2015) To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: BEJ-MIBPQMIN To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - User Manual - External Photo - Internal Photo - Test setup Photo The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, ______________________________ Client’s signature : LG Electronics USA Client’s name / title : Jongchul, Lee/ Director, Standards & Compliance Contact information / address : 1000 Sylvan Avenue, Englewood Cliffs, New Jersey, United States, 7632 Telephone: +201-408-9181 Fax No.: +201-816-2003 E-mail: [email protected]

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 LG Electronics USA (January 05, 2016) To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, LG Electronics USA hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (MIB2 Entry, L69VW2) FCC ID: BEJ-MIBPQMIN Sincerely, ______________________________ Client’s signature : LG Electronics USA Client’s name / title : Jongchul, Lee/ Director, Standards & Compliance Contact information / address : 1000 Sylvan Avenue, Englewood Cliffs, New Jersey, United States, 7632 Telephone: +201-408-9181 Fax No.: +201-816-2003 E-mail: [email protected]

LG Electronics USA Date: January 05, 2016 To SIEMIC Inc 775 Montague Expressway Milpitas, CA 95035 RE: New Family Listing Declaration Please review the attached exhibits supporting our request for applying New Family Listing to the FCC ID: BEJ-MIBPQMIN for Company Name: LG Electronics USA Product Description: MIB2 Entry Base model: L69VW2 Additional model(s): L69SK2, L69SE2 The only difference between the base model L69VW2 and the additional model(s) L69SK2, L69SE2 is as follows: 1) These models are identical to basic model except for the model name only. 2) Brand name: L69VW2 : Volkswagen L69SE2 : Seat L69SK2 : Skoda Should you have any questions, please contact us. Sincerely, ______________________________ Client’s signature : LG Electronics USA Client’s name / title : Jongchul, Lee/ Director, Standards & Compliance Contact information / address : 1000 Sylvan Avenue, Englewood Cliffs, New Jersey, United States, 7632 Telephone: +201-408-9181 Fax No.: +201-816-2003 E-mail: [email protected]

Page 1 of 1 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.3) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. FCC ID : BEJ-MIBPQMIN

Page 1 of 91 Report No. : W15DR-D013 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-002 (Rev.3) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500 FAX: +82-31-746-8700) EMC Testing Div : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) ELECTROMAGNETIC EMISSION COMPLIANCE REPORT FOR LOW-POWER, NON-LICENSED TRANSMITTER Test Report No. : W15DR-D013 AGR No. : A15NA-091 Applicant : LG Electronics USA Address : 1000 Sylvan Avenue, Englewood Cliffs, New Jersey, United States, 7632 Manufacturer : LG Electronics Mlawa Sp. zo.o. Address : Ul. LG Electronics 7 PL-06-500 Mlawa Type of Equipment : MIB2 Entry FCC ID. : BEJ-MIBPQMIN Model Name : L69VW2 Multiple Model Name: L69SK2, L69SE2 Serial number : N/A Total page of Report : 91 pages (including this page) Date of Incoming : November 17, 2015 Date of issue : December 18, 2015 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Reviewed by: Approved by: Jae-Ho, Lee / Chief Engineer Sung-ik, Han/ Managing Director ONETECH Corp. ONETECH Corp. Page 2 of 91 Report No. : W15DR-D013 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-002 (Rev.3) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500 FAX: +82-31-746-8700) EMC Testing Div : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 6  2. TEST SUMMARY .............................................................................................................................................................. 7  2.1 TEST ITEMS AND RESULTS ............................................................................................................................................. 7  2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS ........................................................................................... 7  2.3 RELATED SUBMITTAL(S) / GRANT(S) ............................................................................................................................ 7  2.4 PURPOSE OF THE TEST ................................................................................................................................................... 7  2.5 TEST METHODOLOGY .................................................................................................................................................... 7  2.6 TEST FACILITY ............................................................................................................................................................... 8  3. GENERAL INFORMATION ............................................................................................................................................ 9  3.1 PRODUCT DESCRIPTION ................................................................................................................................................. 9  3.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 9 4. EUT MODIFICATIONS .................................................................................................................................................... 9 5. SYSTEM TEST CONFIGURATION ............................................................................................................................. 10 5.1 JUSTIFICATION ............................................................................................................................................................. 10 5.2 PERIPHERAL EQUIPMENT ............................................................................................................................................ 10 5.3 MODE OF OPERATION DURING THE TEST .................................................................................................................... 11 5.4 CONFIGURATION OF TEST SYSTEM ............................................................................................................................. 1 1 5.5 ANTENNA REQUIREMENT ............................................................................................................................................ 12 6. PRELIMINARY TEST .................................................................................................................................................... 12 6.1 AC POWER LINE CONDUCTED EMISSIONS TESTS ....................................................................................................... 12 6.2 GENERAL RADIATED EMISSIONS TESTS ..................................................................................................................... 12 7. MINIMUM 20 DB BANDWIDTH .................................................................................................................................. 13 7.1 OPERATING ENVIRONMENT ......................................................................................................................................... 13 7.2 TEST SET-UP ................................................................................................................................................................. 13 7.3 TEST EQUIPMENT USED ........................................................................…

Text truncated - open the document above for the full version.

Page 1 of 3 - Conducted Emission Test Page 2 of 3 - Radiated Emission Test Page 3 of 3