BEJ-PREMTA200AResidential Remote Controller

OWNER’S / INSTALLATION MANUAL www.lg.com www.lghvac.com Copyright © 2021 LG Electronics Inc. All rights reserved. MFL71781801 Rev.01_030421 Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. TYPE : WIRED REMOTE CONTROLLER AIR CONDITIONER EN ENGLISH FRFRANÇAISESESPAÑOL TABLE OF CONTENTS 3 SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS 6 PRIOR TO OPERATION 6 Preparing for operation 6 Usage 6 Service 6 READ THIS MANUAL 6 FOR YOUR RECORDS 7 PARTS AND INSTALLING THE CONTROLLER 7 Parts 7 Installing the controller 9 STANDARD OPERATION 9 Installation wizard 10 View Screen 11 Standard Operation 14 ADVANCED FUNCTION 16 SCHEDULE 19 ENERGY 20 SETTINGS 20 General setting 21 Air conditioner / Ventilator setting 23 SVC Contents 24 INSTALLER SETTING 28 USING LG THINQ APPLICATION 29 SPECIFICATIONS 3SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol and either the word WARNING, or CAUTION. WARNING Failure to follow these instructions could result in death or serious injury. CAUTION Failure to follow these instructions could result in minor or moderate injury or damage to the product. All safety messages will tell you what the potential hazard is, inform you as to how to reduce the chance of injury, and tell you what may happen if the instructions are not followed. WARNING To reduce the risk of explosion, fire, death, electric shock, scalding or injury to persons when using this product, follow basic precautions, including the following: Installation or repairs done by unauthorized persons can pose hazards to you and others. Installation MUST conform to the local building codes or, in the absence of local codes, the National Electrical Code NFPA 70/ANSI C1-1003 or current edition and Canadian Electrical Code Part 1 CSA C22. 1. The information contained in this manual is intended for use by a qualified service technician who is familiar with the safety procedures and equipped with the proper tools and test instruments. Failure to read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death. When the power cord needs to be replaced, the replacement work should be performed by authorized personnel using only genuine replacement parts. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. IMPORTANT SAFETY INSTRUCTIONS 4SAFETY INSTRUCTIONS Important Safety Instructions WARNING Installation Contact the dealer to have the air conditioner installed. Incomplete installation performed by yourself may result in a water leakage, electric shock, and fire. Contact the dealer for repairs, maintenance and to reinstall the airconditioner. Incomplete installation performed by yourself may result in a water leakage, electric shock, and fire. Be sure to only use accessories made by LG which are specifically designed for use with the equipment and have them installed by a professional. Improper installation or attachment of equipment or accessories could result in electric shock, a short circuit, leaks, fire or other damage to the equipment. Do not install the unit in an area where there are flammable materials. There is a risk of explosion that could result in serious injury or death. Avoid direct sunlight and moist areas. Power Consult with the installation contractor for cleaning or maintenance. Turn off all electrical power before doing any cleaning or maintenance. There is a risk of water leakage, electric shock or serious injury. Take care to ensure that the power cable cannot be pulled out or damaged during operation. There is a risk of fire or electric shock. Do not touch (operate) the product with wet hands. There is a risk of electrical shock. Operation Be sure to use only those parts which are listed in the SVC parts list. Never attempt to modify the equipment. The use of inappropriate parts can cause an electrical shock or fire. Never sprinkle or spill water or liquids on unit. Doing so could cause fire, failure of the product, or electric shock. Never let the indoor unit or the remote controller get wet. Water can cause an electric shock or a fire. Do not let the air conditioner run while a door or window is open on a day with high humidity. This could result in excessive moisture and water damage. Excess moisture may collect and cause water damage to walls or furniture. If the product becomes soaked (flooded or submerged), contact the dealer. There is a risk of fire or electric shock. Maintenance Tear apart and throw away plastic packaging bags so that children will not play with them. Children playing with plastic bags are at risk of death by suffocation. 5SAFETY INSTRUCTIONS CAUTION Installation Installation work must be performed in accordance with the National Electric Code by qualified and authorized personnel only. Do not install the product where it will be exposed to sea wind (salt spray) directly. This can cause corrosion on the product. Corrosion could cause product malfunction or inefficient operation. The Limited Warranty is void and of no effect, and LG will have no liability hereunder to any Customer or third party, to the extent any of the following occur: acts, omissions, and conduct of any and all third parties including, but not limited to, the installing contractor an…

Text truncated - open the document above for the full version.

LG Electronics USA, Inc. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: LG Electronics USA, Inc. Address: 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States Product Name: Heejae, Cho FCC ID: BEJ-PREMTA200A Model(s): PREMTA200 2.911(d)(5)(i) Equipment Type We, LG Electronics USA, Inc. (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Heejae, Cho Date: September 20, 2023 Title and Company name: Director, Regulatory and Environmental Affairs / LG Electronics USA, Inc. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

LG Electronics USA, Inc. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: LG Electronics USA, Inc. Address: 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States Product Name: Heejae, Cho FCC ID: BEJ-PREMTA200A Model(s): PREMTA200 2.911(d)(5)(ii) Applicant filing We, LG Electronics USA, Inc. (“the applicant”) certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Heejae, Cho Date: September 20, 2023 Title and Company name: Director, Regulatory and Environmental Affairs / LG Electronics USA, Inc. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

LG Electronics USA, Inc. 2.911 (d)(7)USA Agent v1.3 Section 2.911(d)(7) USA Agent for Service of Process (Applicant is Both Grantee and U.S. Agent) Company name: LG Electronics USA, Inc. Address: 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States Product Name: Heejae, Cho Grantee code: BEJ Model(s): PREMTA200 2.911(d)(7) USA Designated Agent for Service of Process This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. LG Electronics USA, Inc. 2.911 (d)(7)USA Agent v1.3 Applicant / USA Agent Company name: LG Electronics USA, Inc. Address: 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States FCC Grantee Code: BEJ FRN No.: 0023476120 Contact Name: Heejae, Cho Telephone No: 201-470-2696 Email: [email protected] Signature: Title: Director, Regulatory and Environmental Affairs Date: September 20, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Letter of Authorization Company : LG Electronics USA, Inc. Address : 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States Product Name : Residential Remote Controller Model Number : PREMTA200 FCC Identifier : BEJ-PREMTA200A We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Heejae, Cho Date: September 20, 2023 Title: Director, Regulatory and Environmental Affairs Signature of applicant:

LG Electronics USA, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 20, 2023 Subject; Request for Confidentiality FCC ID: BEJ-PREMTA200A To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Heejae, Cho Title: Director, Regulatory and Environmental Affairs

Page 1 of 6 FCC ID: BEJ-PREMTA200A Page 2 of 6 FCC ID: BEJ-PREMTA200A Page 3 of 6 FCC ID: BEJ-PREMTA200A Page 4 of 6 FCC ID: BEJ-PREMTA200A Page 5 of 6 FCC ID: BEJ-PREMTA200A Page 6 of 6 FCC ID: BEJ-PREMTA200A

Page 1 of 6 FCC ID: BEJ-PREMTA200A Page 2 of 6 FCC ID: BEJ-PREMTA200A Page 3 of 6 FCC ID: BEJ-PREMTA200A Page 4 of 6 FCC ID: BEJ-PREMTA200A Page 5 of 6 FCC ID: BEJ-PREMTA200A Page 6 of 6 FCC ID: BEJ-PREMTA200A Chip Antenna

Page 1 of 7 Report No.: OT-239-RWD-027 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMF TEST REPORT Test Report No. : OT-239-RWD-027 Reception No. : 2305001328 Applicant : LG Electronics USA, Inc. Address : 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States Manufacturer : LG Electronics Inc. Address : 84, Wanam-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Republic of Korea Type of Equipment : Residential Remote Controller FCC ID. : BEJ-PREMTA200A Model Name : PREMTA200 Serial number : N/A Total page of Report : 7 pages (including this page) Date of Incoming : January 13, 2021 Date of issue : September 20, 2023 SUMMARY The equipment complies with the regulation; FCC CFR 47 PART 1.1310 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Tested by Soon-Ki, Choi / Prj. Engineer ONETECH Corp. Reviewed by Tae-Ho, Kim / Chief Engineer ONETECH Corp. Approved by Jae-Ho, Lee / Chief Engineer ONETECH Corp. Page 2 of 7 Report No.: OT-239-RWD-027 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 4 2. GENERAL INFORMATION ............................................................................................................................................ 5 2.1 PRODUCT DESCRIPTION ................................................................................................................................................. 5 2.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 5 3. EUT MODIFICATIONS .................................................................................................................................................... 5 4. MAXIMUM PERMISSIBLE EXPOSURE ...................................................................................................................... 6 4.1 RF EXPOSURE CALCULATION ....................................................................................................................................... 6 4.2 EUT DESCRIPTION ......................................................................................................................................................... 6 4.3 CALCULATED MPE SAFE DISTANCE FOR WLAN ........................................................................................................ 7 Page 3 of 7 Report No.: OT-239-RWD-027 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) Revision History Rev. No. Issue Report No. Issued Date Revisions Section Affected 0 OT-239-RWD-027 September 20, 2023 Initial Release All Page 4 of 7 Report No.: OT-239-RWD-027 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 1. VERIFICATION OF COMPLIANCE Applicant : LG Electronics USA, Inc. Address : 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States Contact Person : Choi young min / Research Engineer Telephone No. : +82-10-4699-9873 FCC ID : BEJ-PREMTA200A Model Name : PREMTA200 Brand Name : - Serial Number : N/A Date : September 20, 2023 E.U.T. DESCRIPTION Residential Remote Controller THIS REPORT CONCERNS Original Grant MEASUREMENT PROCEDURES KDB 447498 D01 General RF Exposure Guidance v06 TYPE OF EQUIPMENT TESTED Pre-Production KIND OF EQUIPMENT AUTHORIZATION REQUESTED Certification Modifications on the Equipment to Achieve Compliance None -. The above equipment was tested by ONETECH Corp. for compliance with the requirement set forth in the FCC Rules and Regulations. This said equipment in the configuration described in this report, shows the maximum emission levels emanating from equipment are within the compliance requirements. Page 5 of 7 Report No.: OT-239-RWD-027 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 2. GENERAL INFORMATION 2.1 Product Description The LG Electronics USA, Inc., Model PREMTA200 (referred to as the EUT in this report) is a Residential Remote Controller. The product specification described herein was obtained from product data sheet or user’s manual. DEVICE TYPE Residential Remote Controller Temperature Range -0 °C ~ 40 °C OPERATING FREQUENCY 2 412 MHz ~ 2 462 MHz (802.11b/g/n(HT20)) MODULATION TYPE 802.11b: DSSS Modulation(DBPSK/DQPSK/CCK) 802.11g/n(HT20): OFDM Modulation(BPSK/QPSK/16QAM/64QAM) RF OUTPUT POWER 12.80 dBm(802.11b) 11.99 dBm(802.11g) 11.85 dBm(802.11n_HT20) ANTENNA TYPE Chip Antenna ANTENNA GAIN 3.0 dBi List of each Osc. or crystal Freq.(Freq. >= 1 MHz) 32.768 kHz, 24 MHz 2.2 Alternative type(s)/model(s); also covered by this test report. -. None 3. EUT MODIFICATIONS -. None Page 6 of 7 Report No.: OT-239-RWD-027 It should not be reproduced except in full, withou…

Text truncated - open the document above for the full version.

승 인 원 안테나 Type : Dielectric Chip Antenna Part No. : AMAN1003015ST07 고객사 모델명 : WiFi Gateway 고객사 P/N : EAA64985201 2020. 05. 04 주식회사 아 모 텍 LG전자 입 안 심 사 결 정 일 자 / / / AMOTECH 작 성 검 토 승 인 부 서 개발 제조기술 품질 개발 일 자 05/04 05/04 05/04 05/04 2 / 25 Dielectric Chip Antenna 목 차 1. 제/개정 이력 ----------------------------------- 3 2. 제품 규격 ----------------------------------- 4 2.1 전기적 특성 2.2 기계적 특성 2.3모델 및 Lot 표기법 2.4 일자 마킹 표기법 3. 측정방법 ----------------------------------- 8 4. 신뢰성 시험조건 ----------------------------------- 9 4.1 신뢰성 시험결과 보고서 5. 납땜 조건 ----------------------------------- 20 5.1 납땜 온도 조건 (Pb-free) 5.2 PCB 패턴 설계 조건 (권고사항) 6. 구조 및 재질 ----------------------------------- 21 7. 등가회로 ----------------------------------- 21 8. 주의사항 ----------------------------------- 21 9. 포장사양 ----------------------------------- 22 9.1 Carrier tape 사양 9.2 릴(Reel)사양 9.3 박스 포장 사양 9.4 포장 라벨 사양 10. 관리공정도 ----------------------------------- 25 3 / 25 Dielectric Chip Antenna 1. 제/개정 이력 Rev No Date Content Page 0 2020.05.04 최초 작성 4 / 25 Dielectric Chip Antenna 2. 제품 규격 2.1 전기적 특성 구분 항목 규격 비고 1 VSWR 1 Max 5.0:1 2442 ± 42 MHz SET 2 VSWR 2 Max 3.0:1 2360 ± 42MHz Manual Jig MAX 5.0:1 5115 ± 350MHz 3 Radiation Gain Average[dBi] 2442 MHz Typical -2.1 SET Peak [dBi] 2442 MHz Typical 3.0 4 Radiation Pattern Omni-directional - 5 Impedance Nominal 50 Ω Ω ※ 상기 항목 중 출하 검사 시 2번 항목 측정하여 성적서 제출함. ※ 상기 2번 항목 검사 시 제품(시료)를 측정 Jig에 평탄하게 안착시켜 측정 [VSWR: 수동Jig 상에서 측정] 5 / 25 Dielectric Chip Antenna [VSWR: Set 상에서 측정] [3D radiation pattern: SET상에서 측정] [2D radiation pattern: SET상에서 측정] 6 / 25 Dielectric Chip Antenna 2.2 기계적 특성 구 분 항 목 규 격 단 위 1 크기 10.0 x 3.0 x 1.5 mm 2 단위질량 Typical 0.11 g 3 동작온도 -40 ~ +85 °C [ 제품 외관 및 크기 ] 7 / 25 Dielectric Chip Antenna 2.3모델 및 Lot 표기법 Model : (1) : AMOTECH ANTENNA (2) : 칩 크기 (가로X세로X높이) (3) : 표준품 (STANDARD) (4) : 품목일련번호 Lot: (1) : 인쇄년도 ex) 20  2020 (2) : 인쇄 월 ex) 05  5월 (3) : 유전율 ex) 1  알루미나 (4) : 소체 size ex) S  10 * 3 * 1.5T (5) : 소체 size 별 월 생산(인쇄) 일련번호 2.4 일자 마킹 표기법 ◀ W3 0 J Q (1) (2) (3) (4) (5) (1) : 방향 식별 표시 (2) : 모델 표시 (3) : 제조 년도 표시 (예: 0-2020년, 1-2021년) (4) : 제조 월 표시 (예: A-1월, B- 2월) (5) : 제조 일 표시 (예: 1~9 - 1~9일, A ~W -10~31일) AMAN 1003015 ST 07 (1) (2) (3) (4) XX XX - X X XX (1) (2) (3) (4) (5) 8 / 25 Dielectric Chip Antenna 3. 측정방법 3.1 VSWR 규격 - 제품의 전기적 규격 참조 (2.1) 3.2 측정방법 A) 아래와 같이 설정 후RF cable에 대한 Calibration을 실시한다. - 전기적 특성 참조 - Frequency Range를 Setting 한다.  Start frequency: 2000MHz, Stop frequency: 6000GHz B) Network analyzer 에서 Format을 VSWR (SWR)로 변경한다. C) 측정Jig에 antenna cable를 연결한다. D) Marker 1 ~ Marker4를 아래와 같이 설정하고 VSWR을 측정 - Marker 1: 2318 MHz, Marker 2: 2403 MHz - Marker 3: 4765 MHz, Marker 4: 5465 MHzE) E) 사양 내 VSWR 규격과 비교한다. 9 / 25 Dielectric Chip Antenna 4. 신뢰성 시험조건 구분 항목 테스트 조건 요구 사항 1 고착 강도 SMT 되어 있는 시료가 PCB에서 떨어 질 때까지 힘F를 증가 1. 옆으로 미는 힘 F에 의한 기계적 손상 없음 2. 힘의 세기 F ≤ 5 kgf 2 열 충격 1. 1 cycle / 1단계 : -40 ± 3°C, 30 분 2단계 : +85 ± 3°C, 30 분 2. cycle 횟수 : 30회 1. 외관 손상 없음 2. VSWR 만족 3 고온 저항력 1. 온도 : +85 ± 5°C 2. 시간 : 96 시간 1. 외관 손상 없음 2. VSWR 만족 4 저온 저항력 1. 온도 : -40 ± 3°C 2. 시간 : 96 시간 1. 외관손상 없음 2. VSWR 만족 5 고온 고습 1. 습도 : 85 % RH , 온도 : +85 ± 3°C 2. 시간 : 120 시간 1. 외관손상 없음 2. VSWR 만족 F SMD PAD PCB 10 / 25 Dielectric Chip Antenna 4.1 신뢰성 시험결과 보고서 1. Purpose ◎ DCA) AMAN1003015ST07제품 신뢰성 시험 2. Inspector ◎ 최 희 경 3. Reviewed Items No 1 2 3 4 5 4. Attachment : Reliability Test Data -----Attach1 AIQ-C04-01(A4) (주) AMOTECH 2008-08-06(REV.1) - E N D - - P r odu c t n a me Temperature Cycling Dielectric Chip Antenna Satisfies Performance Spec and Should be no appearance damage F > 5 kgf W r itte n by H.K Choi [ Issued Date : 2020. 04. 25 ] M ode l No. 2020. 04. 20 ~ 2020. 04. 24 Satisfies Performance Spec and Should be no appearance damage Satisfies Performance Spec and Should be no appearance damage High Temperature Exposure 77 77 Lot No. Low Temperature DCA) AMAN1003015ST07제품 신뢰성 시험 T e s t T e r ms P a s s Fin a l R e s u lts Test Items AMAN1003015ST07 T itle Test Condition Criteria +85°C, 96Hr -40°C/30min ↔ 85°C/30min, 30 Cycle 85°C, 85%RH, 120Hr Push on the side of product Measure Peak Force Humidity Terminal Strength(SMD) P a s s Result Qty 77 -40°C, 96Hr Satisfies Performance Spec and Should be no appearance damage P a s s P a s s P a s s P a s s 30 77 Reliability Test Report Prepared Checked Approved / / / 11 / 25 Dielectric Chip Antenna 4.1.1 Low temperature VS W R @2360 ± 42 MHz VS W R @5115 ± 350 MHz VS W R @2360 ± 42 MHz VS W R @5115 ± 350 MHz 1 1.71 3.61 1.66 3.60 2 1.68 3.59 1.65 3.61 3 1.69 3.61 1.64 3.58 4 1.64 3.45 1.65 3.42 5 1.61 3.40 1.64 3.28 6 1.54 3.43 1.52 3.60 7 1.76 3.43 1.51 3.52 8 1.63 3.46 1.56 3.51 9 1.65 3.42 1.67 3.49 10 1.66 3.47 1.64 3.48 11 1.68 3.42 1.65 3.45 12 1.57 3.41 1.51 3.48 13 1.65 3.39 1.64 3.42 14 1.64 3.44 1.62 3.45 15 1.69 3.54 1.66 3.51 16 1.69 3.47 1.67 3.48 17 1.50 3.32 1.52 3.45 18 1.52 3.40 1.55 3.17 19 1.66 3.35 1.58 3.30 20 1.70 3.25 1.54 3.30 21 1.64 3.42 1.61 3.32 22 1.69 3.31 1.56 3.24 23 1.60 3.28 1.65 3.28 24 1.64 3.24 1.60 3.38 25 1.60 3.38 1.55 3.46 26 1.58 3.57 1.50 3.42 27 1.49 3.49 1.48 3.47 28 1.67 3.58 1.65 3.54 29 1.63 3.37 1.64 3.31 30 1.68 3.23 1.55 3.22 31 1.54 3.42 1.53 3.45 32 1.62 3.37 1.65 3.38 33 1.59 3.30 1.55 3.19 34 1.56 3.43 1.57 3.53 35 1.68 3.30 1.57 3.36 36 1.49 3.52 1.46 3.51 37 1.47 3.50 1.52 3.51 38 1.54 3.44 1.52 3.48 39 1.66 3.18 1.58 3.10 40 1.52 3.34 1.52 3.20 T e s t Con dition S a mple No. VSWR MAX 2.5:1 @2360±42MHz/ VSWR MAX 4.5:1 @5115±350MHz -40°C, 96Hr Be for e T e s t Afte r T e s t 12 / 25 Dielectric Chip Antenna VS W R @2360 ± 42 MHz VS W R @5115 ± 350 MHz VS W R @2360 ± 42 MHz VS W R @5115 ± 350 MHz 411.593.461.543.40 421.663.211.623.18 431.543.211.543.14 441.593.491.493.50 451.513.401.493.51 461.653.421.673.45 471.643.331.653.38 481.633.401.663.42 491.623.411.673.42 501.613.361.653.38 511.603.741.623.68 521.623.501.613.52 531.663.621.653.48 541.583.231.533.22 551.553.211.573.33 561.573.531.523.43 571.633.241.583.22 581.603.231.683.23 591.663.541.493.63 601.563.401.553.27 611.523.501.583.50 621.663.381.…

Text truncated - open the document above for the full version.

Page 1 of 57 Report No.: OT-239-RWD-026 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) RADIO PERFORMANCE TEST REPORT Test Report No. : OT-239-RWD-026 Reception No. : 2305001328 Applicant : LG Electronics USA, Inc. Address : 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States Manufacturer : LG Electronics Inc. Address : 84, Wanam-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Republic of Korea Type of Equipment : Residential Remote Controller FCC ID. : BEJ-PREMTA200A Model Name : PREMTA200 Serial number : N/A Total page of Report : 57 pages (including this page) Date of Incoming : January 13, 2021 Date of issue : September 20, 2023 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Tested by Soon-Ki, Choi / Prj. Engineer ONETECH Corp. Reviewed by Tae-Ho, Kim / Chief Engineer ONETECH Corp. Approved by Jae-Ho, Lee / Chief Engineer ONETECH Corp. Page 2 of 57 Report No.: OT-239-RWD-026 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 5 2. TEST SUMMARY .............................................................................................................................................................. 6 2.1 TEST ITEMS AND RESULTS ............................................................................................................................................. 6 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS ........................................................................................... 6 2.3 RELATED SUBMITTAL(S) / GRANT(S) ............................................................................................................................ 6 2.4 PURPOSE OF THE TEST ................................................................................................................................................... 6 2.5 TEST METHODOLOGY .................................................................................................................................................... 6 2.6 TEST FACILITY ............................................................................................................................................................... 6 3. GENERAL INFORMATION ............................................................................................................................................ 7 3.1 PRODUCT DESCRIPTION .........................................................................................................…

Text truncated - open the document above for the full version.