BEJ37LDBTLCD TV/Monitor

P/NO : MFL34797004 (0612-REV00) As an ENERGY STARPartner LGE U. S. A.,Inc.has determined that thisproduct meets the ENERGYSTAR guidelines for energy efficiency.As an ENERGY STARPartner LGE U. S. A.,Inc.has determined that thisproduct meets the ENERGYSTAR guidelines for energy efficiency. LCD TV PLASMA TV 32LC7D37 LC 7 D42LC7D 42PC5D50PC5D LCD TV MODELS PLASMA TV MODELS WARNING / CAUTION 1 WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre- quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi- sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is con- nected. - Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and main- tenance (servicing) instructions in the literature accompanying the appliance. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING / CAUTION 2 IMPORTANT SAFETY INSTRUCTIONS SAFETY INSTRUCTION Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat. Do not defeat the safety purpose of the polar- ized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction : O w n e r M a n u a l O w n e r M a n u a l O w n e r M a n u a l O w n e r M a n u a l O w n e r M a n u a l O w n e r M a n u a l O w n e r M a n u a l O w n e r M a n u a l O w n e r M a n u a l O w n e r M a n u a l O w n e r M a n u a l O w n e r M a n u a l Owner ManualO w n e r M a n u a l O w n e r M a n u a l 1 2 3 4 5 6 7 WARNING / CAUTION 3 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service person- nel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION concerning the Power Cord : Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension…

Text truncated - open the document above for the full version.

EXTERNAL EQUIPMENT SETUP 20 VCR SETUP EXTERNAL EQUIPMENT SETUP When connecting with an antenna  To avoid picture noise ( interference ) , leave an adequate distance between the VCR and TV  Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. HDMI/DVI IN ANTENNA/ CABLE IN REMOTE CONTROL IN RS-232C IN (CONTROL & SERVICE) RGB IN (PC) AUDIO IN (RGB/DVI) DIGITAL AUDIO OUT OPTICAL 1 2 VIDEO S-VIDEO LR S-VIDEOVIDEO OUTPUT SWITCH ANT IN ANT OUT VIDEOAUDIO ( ) AUDIO ( ) Wall Jack Antenna 1 2 Connect the RF antenna out socket of the VCR to the AAnntteennnnaa socket on the set. Connect the antenna cable to the RF antenna in socket of the VCR. 1. How to connect  Set VCR output switch to 3 or 4 and then tune TV to the same channel number.  Insert a video tape into the VCR and press PLAY on the VCR. ( Refer to the VCR owner’s manual. ) 2. How to use 2 1 EXTERNAL EQUIPMENT SETUP 21 GG Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. CAUTION When connecting with a RCA cable GG The picture quality is improved: compared to normal composite (RCA cable) input. NOTE ! N DIGITAL AUDIO OUT OPTICAL COMPONENT IN AV OUT AV IN 1 S-VIDEO VIDEOAUDIO VIDEOAUDIO MONO ( ) LR S-VIDEOVIDEO OUTPUT SWITCH ANT IN ANT OUT AUDIO ( ) VIDEOAUDIO ( ) LR S-VIDEOVIDEO OUTPUT SWITCH ANT IN ANT OUT DIGITAL AUDIO OUT OPTICAL COMPONENT IN AV OUT VIDEOAUDIO AV IN 1 VIDEO S-VIDEO AUDIO MONO ( ) Connect the AAUUDDIIOO / VVIIDDEEOO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 1. How to connect 2. How to use  Insert a video tape into the VCR and press PLAY on the VCR. ( Refer to the VCR owner’s manual. )  Select AAVV11 input source with using the IINNPPUUTT button on the remote control.  If connected to AAVV IINN22 , select AAVV22 input source. When connecting with an S-Video cable Connect the S-VIDEO output of the VCR to the SS--VVIIDDEEOO input on the set. Connect the audio outputs of the VCR to the AAUUDDIIOO input jacks on the set. 1. How to connect 2. How to use  Insert a video tape into the VCR and press PLAY on the VCR. ( Refer to the VCR owner’s manual. )  Select AAVV11 input source with using the IINNPPUUTT button on the remote control.  If connected to AAVV IINN22 , select AAVV22 input source. 1 2 1 GG If you have a mono VCR, con- nect the audio cable from the VCR to the AAUUDDIIOO LL//MMOONNOO jack of the set. NOTE ! 1 1 2 EXTERNAL EQUIPMENT SETUP 22 OTHER A/V SOURCE SETUP EXTERNAL EQUIPMENT SETUP AV IN 2 L/MONO R AUDIO VIDEO S-VIDEO LR VIDEO Camcorder Video Game Set Connect the AAUUDDIIOO / VVIIDDEEOO jacks between TV and external equipment. Match the jack colors. ( Video = yellow, Audio Left = white, and Audio Right = red ) 1. How to connect 2. How to use  Select AAVV22 input source with using the IINNPPUUTT button on the remote control.  If connected to AAVV IINN11 input, select AAVV11 input source.  Operate the corresponding external equipment. 1 1 GG This TV finds the connected input sources automati- cally for AV1, AV2, Component 1-2, RGB, HDMI1/DVI and HDMI2 sources are connected. NOTE ! EXTERNAL EQUIPMENT SETUP 23 PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15pin cable GG Check the image on your TV. There may be noise associ- ated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. NOTE ! RGB OUTPUTAUDIO HDMI/DVI IN REMOTE CONTROL IN RS-232C IN (CONTROL & SERVICE) RGB IN (PC) AUDIO IN (RGB/DVI) DIGITAL AUDIO OUT OPTICAL 1 2 ERVICE Connect the RGB output of the PC to the RRGGBB IINN (( PPCC )) jack on the set. Connect the PC audio output to the AAUUDDIIOO IINN (( RRGGBB//DDVVII )) jack on the set. 1. How to connect 2. How to use  Turn on the PC and the set.  Select RRGGBB--PPCC input source in main input option of SETUP menu. (( GG pp..6677 )) 2 1 1 2 EXTERNAL EQUIPMENT SETUP 24 EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable ANTENNA/ CABLE IN REMOTE CONTROL RS-232C IN (CONTROL & SERVICE RGB IN (PC) AUDIO IN (RGB/DVI) SERVICE HDMI/DVI IN 1 2 DVI-PC OUTPUTAUDIO 1 2 GG If the PC has a DVI output and no HDMI output, a sepa- rated audio connection is necessary. GG If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of PC graphics card's output resolution to 1024x768, 60Hz. NOTE ! Connect the DVI output of the PC to the HHDDMMII//DDVVII IINN 11 or 22 jack on the set. Connect the PC audio output to the AAUUDDIIOO IINN (( RRGGBB//DDVVII )) jack on the set. 1. How to connect 2. How to use  Turn on the PC and the set  Select HHDDMMII11//DDVVII or HHDDMMII22 input source with using the IINNPPUUTT button on the remote control. 2 1 EXTERNAL EQUIPMENT SETUP 25 GG To get the the best picture quality, adjust the PC graphics card to1024x768, 60Hz. GG Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. GG When Source Devices are connected with HDMI/DVI Input, the output PC Resolution (VGA, SVGA, XGA, WXGA), Position and Size may not fit on the Screen. Press the ADJUST button to adjust the screen Position of the TV SET and contact a PC graphics card service center…

Text truncated - open the document above for the full version.

PICTURE CONTROL 40 PICTURE SIZE (ASPECT RATIO) CONTROL PICTURE CONTROL 12 3 45 6 VOLCH MUTEFAV BRIGHT - MENU BRIGHT + ENTER EXIT TIMER SIMPLINK RATIO Set by program Selects the proper picture proportion to match the source’s image. 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. 16:9 Adjust the picture horizontally, in a linear pro- portion to fill the entire screen. Horizon The screen size is, more enlarged at both sides, to create a spectacular view. Zoom 1 Choose Zoom 1 when you want to view the pic- ture without any alteration. However, the top and bottom portions of the picture will be cropped. Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed.  RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio. Press the RRAATTIIOO button repeatedly to select the desired picture format. You can also adjust AAssppeecctt RRaattiioo in the OOPPTTIIOONN menu. 1 Set By Program 4:3 16:9 Horizon Set By Program (4:3 4:3) @6K?e? @@@6X?? @@@@@@@@@@@@@@@@@@)K? @@@@@@@@@@@@@@@@@@@@6 @@@@@@@@@@@@@@@@@@@@@ @@@@@@@@@@@@@@@@@@@(? @@@@0Y? @@(Me? @0Y?e? (16:9 16:9) @6K?e? @@@6X?? @@@@@@@@@@@@@@@@@@)K? @@@@@@@@@@@@@@@@@@@@6 @@@@@@@@@@@@@@@@@@@@@ @@@@@@@@@@@@@@@@@@@(? @@@@0Y? @@(Me? @0Y?e? Zoom 1 Zoom 2 NOTE ! GG If a fixed image is displayed on the screen for a long time, the image may become imprinted on the screen and remain visible. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. PICTURE CONTROL 41 PRESET PICTURE SETTINGS ADJUST SAP SOUND PICTURE CC 12 3 45 6 78 0 9 BACK VOLCH MUTEFAV EZ Picture - Preset Press the PPIICCTTUURREE button repeatedly to select the picture appearance setup option as below : DDaayylliigghhtt , NNoorrmmaall , NNiigghhtt TTiimmee , UUsseerr11 , and UUsseerr22 (your own settings). Press the EEXXIITT button to save and return to TV viewing. EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. DDaayylliigghhtt , NNoorrmmaall , NNiigghhtt TTiimmee Settings are preset for the optimum picture quality at the factory and are not adjustable. In the UUsseerr11 and UUsseerr22 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint.  You can also use the VVIIDDEEOO menu to adjust EEZZ PPiiccttuurree . 2 1 Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. Press the MMEENNUU button and then use DD or EE button to select the VVIIDDEEOO menu. Press the GG button and then use DD or EE button to select CCoolloorr TTeemmppeerraattuurree . Press the GG button and then use DD or EE button to select either CCooooll , MMeeddiiuumm , WWaarrmm or UUsseerr . Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. 2 3 4 1 EZ Picture Color Temperature G XD Advanced Video Reset Cool Medium Warm User EZ Picture Color Temperature XD Advanced Video Reset 1 23 PICTURE CONTROL 42 PICTURE CONTROL BRIGHT - BRIGHT + ENTER TIMER RATIO SIMPLINK POWER VCR TV DVD AUDIO CABLE STB MODE TV INPUT INPUT EXIT MENU MANUAL PICTURE ADJUSTMENT EZ Picture - User Mode Adjust the picture appearance to suit your preference and viewing situations. EZ Picture Color Temperature XD Advanced Video Reset Daylight Normal Night Time User 1 G User 2 Selection ( G or ) leads you to the detailed setting screen. Contrast 85 FF G EE User1 Contrast85 G Brightness50 Color50 Sharpness50 Tint0 RG Press to confirm. MENU EZ Picture Color Temperature XD Advanced Video Reset 1 23 4 5 Press the MMEENNUU button and then use DD or EE button to select the VVIIDDEEOO menu. Press the GG button and then use DD or EE button to select EEZZ PPiiccttuurree . Press the GG button and then use DD or EE button to select UUsseerr 11 or UUsseerr 22 . Press the GG button and then use DD or EE button to select the desired picture option (( CCoonnttrraasstt , BBrriigghhttnneessss , CCoolloorr , SShhaarrppnneessss , or TTiinntt )) . Press the GG button and then use FF or GG button to make appropriate adjustments. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. 2 3 4 5 6 1 PICTURE CONTROL 43 BRIGHT - BRIGHT + ENTER TIMER RATIO SIMPLINK POWER VCR TV DVD AUDIO CABLE STB MODE TV INPUT INPUT EXIT MENU You can also adjust the detailed settings (Red, Green, Blue) by selecting the CCoolloorr TTeemmppeerraattuurree--UUsseerr menu. Color Tone - User Mode Press the MMEENNUU button and then use DD or EE button to select the VVIIDDEEOO menu. Press the GG button and then use DD or EE button to select CCoolloorr TTeemmppeerraattuurree . Press the GG button and then use DD or EE button to select UUsseerr . Press the GG button and then use DD or EE button to select RReedd , GGrreeeenn , or BBlluuee . Press the GG button and then use FF or GG button to make appropriate adjustments.  The adjustment range of RRGGBB , GGrreeeenn , or BBlluuee is -20 ~+20. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. EZ Picture Color Temperature XD Advanced Video Reset EZ Picture Color Temperature XD Advanced Video Reset 2 3 4 5 6 1 User Red0 G Green0 Blue0 Press to confirm. MENU Selection ( G or ) leads you to the detailed setting screen. Cool Medium Warm User G Red 0 FF G EE 23 1 4 5 PICTURE CONTROL 44 PICTURE CONTROL BRIGHT - BRIGHT + ENTER TIMER RATIO SIMPLINK POWER VCR TV DVD AUDIO CABLE STB MODE TV INPUT INPUT EXIT MENU XD - PICTU…

Text truncated - open the document above for the full version.

LG Electronics Inc. Date:Sep 19,2006 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize <ESTECH CO.,Ltd.>, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by <ESTECH CO., Ltd.> on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing <ESTECH CO.,Ltd.> as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Sang-Wook Lee/Manager Engineer Tel:82-54-470-4532 REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us.

LG Electronics Inc. 642 Jinpyoung-dong, Kumi-city, Kyoungsangbuk-do, 730-727,Korea TEL : +82-54-470-5639 FAX : 82-54-470-4534 Federal Communications Commission Authorization and Evaluation Division FCC ID : BEJ37LDBT Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Curcuit Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the data of the Grant for this application. Sincerely, Sang-Wook Lee/ Manager Engineer LG Electronics Inc. TEL : +82-54-470-5639 FAX : 82-54-470-4534

1. FRONT 2. REAR 3. PORT

INTERNAL PHOTO 1. MAIN 1.1 Front 1.2 Rear 2. POWER 2.1 Front 2.2 Rear 3.CTRL 3.1 Front 3.2 Rear 4. LCD 4.1 Front 4.2 Rear

Test Report for FCC Company name Address Telephone Product name Basic Model Additional Models Test date Testing location Standard □ Class A ■ Class B Test resultOK □ Class A ■ Class B Test resultOK Tested by Reviewed by Abbreviation * Note - Basic Model : 37LC7D-UB - Additional Models : Z37LC7D,37LC7D,Z37LC7DA - Basic Model and Addition Models are same product,only model name is different. - This test report is not permitted to copy partly without our permission - This test result is dependent on only equipment to be used - This test result based on a single evaluation of one sample of the above mentioned Report Number : ESTF150701-008 , Web : www. estech. co. kr Page 1 of 15 Report NumberESTF150701-008 Manufacturer Country of origin Applicant Product 11-Jan-07 LCD TV/Monitor 37LC7D-UB Z37LC7D,37LC7D,Z37LC7D A LG Electronics Inc. KOREA Date of issue ESTECH. Co., Ltd. 97-1 Hoiuk-Ri Majang-Myon, Icheon-city, KyungKi-Do, Korea Test item ■ Conducted Emission ■ Radiated Emission FCC PART 15 2006 , ANSI C 63.4 2003 , ICES-003 10-Jan-07 OK, Pass = Passed, Fail = Failed, N/A = not applicable LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs, NJ 07632 847-941-8373 Measurement facility registration number Engineer H.H.Lee Manager Engineer J.M.Yang 94696 (Signature) (Signature) 3 4 5 6 8 8 8 9 10 11 11 11 12 13 15 Appendix 1. Spectral diagram Report Number : ESTF150701-008 , Web : www. estech. co. kr Page 2 of 15 5. Measurement of radiated emission ..................................................................... 5.1 Measurement equipment .............................................................................. Contents 1. Laboratory Information .................................................................................... 2. Descri ption of EUT .......................................................................................... 3. Test Standards ................................................................................................ 4. Measurement condition .................................................................................... 5.2 Environmental conditions .............................................................................. 5.4 Test data ................................................................................................... 5.3 Test data ................................................................................................... 7. Photographs of test setup ................................................................................. 8. Photographs of EUT .......................................................................................... 6. Measurement of conducted emission .................................................................. 6.1 Measurement equipment .............................................................................. 6.2 Environmental conditions .............................................................................. 6.3 Test data ................................................................................................... 1. Laboratory Information 1.1 General 1.2 Test Lab. Corporation Name : ESTECH Co. Ltd Head Office : Rm 1015, World Venture Center II, 426-5, Gasan-dong, Geumcheon-gu, Seoul, Korea (Safety & Telecom. Test Lab) EMC Test Lab : 58-1 Osan-Ri, GaNam-Myon, YeoJoo-Gun, KyungKi-Do, Korea 97-1 Hoiuk-Ri Majang-Myon, Icheon-city, KyungKi-Do, Korea 1.3 Official Qualification(s) MIC : Granted Accreditation from Ministry of Information & Communication for EMC, Safety and Telecommunication KOLAS : Accredited Lab By Korea Laboratory Accreditation Schema base on CENELEC requirements FCC : Filed Laboratory at Federal Communications Commission VCCI : Granted Accreditation from Voluntary Control Council for Interference from ITE This EUT (Equipment Under Test) has been shown to be capable of compliance with the applicable technical standards and is tested in accordance with the measurement procedures as indicated in this report.ESTECH Lab attests to accuracy of test data. All measurement reported herein were performed by ESTECH Co., Ltd. ESTECH Lab assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report Number : ESTF150701-008 , Web : www. estech. co. kr Page 3 of 15 2. Description of EUT 2.1 Summary of Equipment Under Test NONE: Model Number : 37LC7D-UB Serial Number : Manufacturer : Country of origin : Rating : Receipt Date : X-tal lists: 54MHz, 14.3MHz, 24MHz, 4MHz 2.2 General descriptions of EUT Report Number : ESTF150701-008 , Web : www. estech. co. kr Page 4 of 15 LCD TV/Monitor NONE LG Electronics Inc. KOREA INPUT:AC100-240V ~ 50 /60Hz 2007-01-05 3. Test Standards Test Standard : FCC PART 15 (2006) & ICES-003 Test Method : ANSI C 63.4 (2003) This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and AC power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain decides that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment These method apply to the measurement of individual units or systems comprised of multiple units This Standard sets out the regulations under which an intentional, unintentional, or incidental radiator may be operated without an individual license. It also contains the technical specifications, administrative requirements and other conditions relating to the marketing of Part 15 devices. Report Number : ESTF150701-008 , Web : www. estech. co. kr Page 5 of 15 4. Meas…

Text truncated - open the document above for the full version.

TEST SETUP PHOTO 1. Conducted Emission setup photo 1.1. Front 1.2. Rear 2. Radiated Emission setup photo 2.1 Front 2.2. Rear