BEJ50PK950UAPlasma TV/Monitor

P/NO : SAC34134203 (1001-REV03) www.lge.com OWNER’S MANUAL LED LCD TV / LCD TV PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. 2 WARNING / CAUTION The lightning flash with arrowhead symbol, within an equilateral trian- gle, is intended to alert the user to the presence of uninsulated “dan- gerous voltage” within the product’s enclo- sure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equi- lateral triangle is intended to alert the user to the presence of important oper- ating and maintenance (servicing) instruc- tions in the literature accompanying the appliance. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guide- lines for proper grounding and, in particular, speci- fies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC Notice Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro- tection against harmful interference in a residen- tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equip- ment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is con- nected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi- tions: (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device). Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. 3 SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 Do not use this apparatus near water. 2 Clean only with dry cloth. 3 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 4 Do not install near any heat sources such as radiators, heat registers, stoves, or other appa- ratus (including amplifiers) that produce heat. 5 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec- trician for replacement of the obsolete outlet. 6 Protect the power cord from being walked on or pinched particularly at plugs, conve- nience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories speci- fied by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 9 Unplug this apparatus during lighting storms or when unused for long periods of time. 10 Refer all servicing to qualified service per- sonnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is dam- aged, liquid has been spilled or objects have fallen into the apparatus, the appara- tus has been exposed to rain or moisture, does not operate normally, or has been dropped. IMPORTANT SAFETY INSTRUCTIONS 4 SAFETY INSTRUCTIONS 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. 14 CAUTION concerning the Power Cord: It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appli- ance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, exten- sion cords, frayed power cords, or damaged or cracked wire insulation are dangerous . Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if…

Text truncated - open the document above for the full version.

MY MEDIA MY MEDIA 102 MOVIE LIST It displays all of the video files it recognizes. The On-Screen Display on your model may be slightly different. Precautions when playing the video files ŹSome user-created subtitles may not work properly. ŹSome special characters are not supported in subtitles. ŹHTML tags are not supported in subtitles. ŹTime information in an external subtitle file should be arranged in ascending order to be played. ŹThe screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed. ŹA damaged video file may not be played correctly, or some functions may not be usable. ŹVideo files produced with some encoders may not be played correctly. ŹIf the video and audio structure of recorded file is not interleaved, the file not playback properly. ŹVideo with resolution higher than maximum resolution supported for each frame, cannot be guar- anteed for smooth playback. ŹVideo files other than the specified types and formats may not work properly. ŹThe movie file encoded by the GMC (Global Motion Compensation) is not supported. ŹOnly the files saved in ASCII Code is supported in subtitles. ŹOnly 250 Korean characters, 500 letters and 500 numbers are supported for each line of the subtitle. ŹOnly 10000 sync blocks are supported within the subtitle file. ŹWe do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC. ŹDTS Audio codec is not supported. ŹA video file more than 30GB in file size is not supported for playback. ŹPlaying a video via a USB connection that doesn’t support high speed may not work properly. ŹUSB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list. ŹThe video file and its subtitle file must be located in the same folder. At this time, a video file name and its subtitle file name must be identical for it to be displayed. ŹWhen you are watching a movie via the Movie List function, you can adjust the picture with the ENERGY SAVING and AV MODE button on the remote control. User setup for each picture mode is not supported. Supported movie file ᯫ Resolution: under 1920 pixel (width) x 1080 pixel (height) ᯫ Frame Rate: under 30 frame/sec (1920x1080), under 60 frame/sec (1280x720) ᯫ Max bitrate of playable video file: 20 Mbps (Mega bit per second) ᯫ Bit rate of audio format: within 32 kbps to 320 kbps (MP3) ᯫ Supported external subtitle format: *.smi/*.srt/*.sub(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*. txt(TMPlayer)/*.psb(PowerDivX) ᯫ Supported Internal subtitle format: only, XSUB (It is the subtitle format used in DivX6 files) 103 MY MEDIA Supported Video Formats File Extensions Audio/ Video Codec Profile/Level Support Explanation .asf .wmv .wma Video VC-1 Advanced Profile Advanced Profile@Level 3 (e.g. 720p60, 1080i60, 1080p30) Only streams compliant to SMPTE 421M VC-1 standard are supported. VC-1 Simple and Main Profiles Simple Profile@Medium Level (e.g. CIF, QVGA) Main Profile@High Level (e.g. 1080p30) Audio WMA Standard WMA 9 Professional .divx .avi Video DivX3.11 Global motion compen- sation or quarterpel motion estimation does not supported. Streams using this syntax are not supported. DivX4 DivX5 DivX6 Advanced Simple Profile (e.g. 720p/1080i) XViD H.264 / AVC Main Profile@ Level 4.1 High Profile@ Level 4.1 (e.g. 720p60, 1080i60, 1080p30) Audio MPEG-1 Layer I, II MPEG-1 Layer III (MP3) Dolby Digital .mp4 .m4a .m4v Video H.264 / AVC Main Profile@ Level 4.1 High Profile@ Level 4.1 (e.g. 720p60, 1080i60, 1080p30) Global motion compen- sation or quarterpel motion estimation does not supported. Streams using this syntax are not supported. MPEG-4 Part 2Advanced Simple Profile (e.g. 720p/1080i) AudioAACAAC-LC and HE-AAC .mkv VideoH.264 / AVC Main Profile@ Level 4.1 High Profile@ Level 4.1 (e.g. 720p60, 1080i60, 1080p30) Most of the MKV con- tent available is encod- ed by the open source x264 codec. Audio AACAAC-LC and HE-AAC Dolby Digital .ts .trp .tp Video H.264 / AVC Main Profile@ Level 4.1 High Profile@ Level 4.1 (e.g. 720p60, 1080i60, 1080p30) MPEG-2Main Profile@High Level(e.g. 720p60, 1080i60) VC-1 Simple Profile@Medium Level (e.g. CIF, QVGA) Main Profile@High Level (e.g. 1080p30) Advanced Profile@Level3 (e.g. 720p60, 1080i60, 1080p30) Only streams compliant to SMPTE 421M VC-1 standard are supported. Audio MPEG-1 Layer I, II MPEG-1 Layer III (MP3) Dolby Digital AACAAC-LC and HE-AAC .vob Video MPEG-1 MPEG-2Main Profile@High Level (e.g. 720p60, 1080i60) Audio Dolby Digital MPEG-1 Layer I, II DVD-LPCM .mpg Video MPEG-1 MPEG-2 Main Profile@High Level (e.g. 720p60, 1080i60) Only streams compliant configured properly for TS, PS or ES AudioMPEG-1 Layer I, II MY MEDIA MY MEDIA 104 SelectMY MEDIA. SelectMovie List. 2 1 MENU ENTERENTER 1 Moves to upper level folder 2 Current page/Total pages 3 Corresponding buttons on the remote control 4 Contents under the folder focused on 1 5 Current page/ total pages of contents Screen Components 3DJH 0RYLH/LVW 3DJH86%;7,&. ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUN 'ULYH (0)BB7RS)+' 09  0RRQ&KLOG'LY;$  1 5 4 2 3 ᯕ&KDQJH'HYLFHᯕ7R3KRWR/LVW ᯕ&KDQJH1XPEHUV ᯕ0DUN0RGH᰿([LW RED Change to a different input. GREEN Move to Photo List orMusic List. YELLOW Change Numbers: Changes the number or thumbnails displayed at a time. BLUE Allows you to mark certain files. EXIT Return to TV viewing. 105 MY MEDIA ᯫ Use the CH( ᰜᰝ) button to navigate in the movie page. ᯫ When one or more movie files are marked, the marked movies will be played in sequence. 1 Select the target folder or drive. 2 ENTER Select the desired movie title. 3 FAV MARK CHAR/NUM Mark your desired movie file. 4 RED Play the marked movie file. It displays the current movie status progress bar on the bot- tom of the screen. Movie Selection Mark Mode RED Play Marked: Play the first selected file. Once a movie finishes playing, the next selected one will be played automatically. GREEN Ma…

Text truncated - open the document above for the full version.

LG Electronics USA Date: FEB 12, 2010 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Jin-Mo Yang,Engineering Manager of ESTECH Co., Ltd. and hereafter referred to as ESTECH, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jin-Mo Yang,Engineering Manager of ESTECH Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ESTECH as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Mr. Jae Cheon Lee,General Manager LG Electronics USA. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

LG Electronics USA Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: BEJ50PK950UA To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Block Diagram, Schematics Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until (please enter the product announcement date here): 45days Internal Photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Mr Jae Cheon Lee,General Manager LG Electronics USA. 2010-2-19

INTERNAL PHOTO 1. MAIN 1.1 Front 1.2 Rear 2. Power 2.1 Front 2.2 Rear 3. PDP 3.1 Front 3.2 Rear 4. CTRL 4.1 Front 4.2 Rear 5. YSUS 5.1 Front 5.2 Rear 6. ZSUS 6.1 Front 6.2 Rear 7. IR 7.1 Front 7.2 Rear 8.ZSUS SUB 8.1 Front 8.2 Rear 9.LED 9.1 Front 9.2 Rear 10.RF MODULE 10.1 Front 10.2 Rear 11.YDRVBT 11.1 Front 11.2 Rear 12.YDRVTP 12.1 Front 12.2 Rear 13. TUNER(See main board)

Test Report for FCC FCC ID:BEJ50PK750UA Company name Address Telephone Product name Model name Serial number Test date Testing location Standard □ Class A ■ Class B Test resultOK □ Class A ■ Class B Test resultOK Tested by Reviewed by Abbreviation * Note - Basic model: 50PK950-UA Additional model: 50PK950-UF - This test report is not permitted to copy partly without our permission - This test result is dependent on only equipment to be used - This test result based on a single evaluation of one sample of the above mentioned Report Number : ESTF151002-007 , Web : www. estech. co. kr Page 1 of 15 Report NumberESTF151002-007 Manufacturer Country of origin Applicant Product 19-Feb-10 PLASMA TV/MONITOR OK, Pass = Passed, Fail = Failed, N/A = not applicable 50PK950-UA NONE LG Electronics Inc. KOREA Date of issue ESTECH. Co., Ltd. 97-1 Hoiuk-Ri Majang-Myon, Icheon-city, KyungKi-Do, Korea Senior Engineer H.H.Lee Engineering Manager J.M.Yang 94696 (Signature) (Signature) LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs, NJ 07632 847-941-8373 Measurement facility registration number Test item ■ Conducted Emission ■ Radiated Emission FCC PART 15 (2008) & ICES-003 , ANSI C 63.4 2003 10-Feb-10 EST-QP-20-01(0)-(F15) 3 4 5 6 8 8 8 9 10 11 11 11 12 13 15 Appendix 1. Spectral diagram Report Number : ESTF151002-007 , Web : www. estech. co. kr Page 2 of 15 5. Measurement of radiated emission ..................................................................... 5.1 Measurement equipment .............................................................................. Contents 1. Laboratory Information .................................................................................... 2. Descri ption of EUT .......................................................................................... 3. Test Standards ................................................................................................ 4. Measurement condition .................................................................................... 5.2 Environmental conditions .............................................................................. 5.4 Test data ................................................................................................... 5.3 Test data ................................................................................................... 7. Photographs of test setup ................................................................................. 8. Photographs of EUT .......................................................................................... 6. Measurement of conducted emission .................................................................. 6.1 Measurement equipment .............................................................................. 6.2 Environmental conditions .............................................................................. 6.3 Test data ................................................................................................... EST-QP-20-01(0)-(F15) 1. Laboratory Information 1.1 General 1.2 Test Lab. Corporation Name : ESTECH Co., Ltd. Head Office : Rm 1015, World Venture Center II, 426-5, Gasan-dong, Geumcheon-gu, Seoul, Korea (Safety & Telecom. Test Lab) EMC Test Lab : 97-1, Hoeok-ri, Majang-myun, Ichion-city, Kyonggi-do, South Korea 1.3 Official Qualification(s) KCC : Granted Accreditation from Ministry of Information & Communication for EMC, Safety and Telecommunication KOLAS : Accredited Lab By Korea Laboratory Accreditation Schema base on CENELEC requirements FCC : Filed Laboratory at Federal Communications Commission VCCI : Granted Accreditation from Voluntary Control Council for Interference from ITE This EUT (Equipment Under Test) has been shown to be capable of compliance with the applicable technical standards and is tested in accordance with the measurement procedures as indicated in this report.ESTECH Lab attests to accuracy of test data. All measurement reported herein were performed by ESTECH Co., Ltd. ESTECH Lab assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report Number : ESTF151002-007 , Web : www. estech. co. kr Page 3 of 15 EST-QP-20-01(0)-(F15) 2. Description of EUT 2.1 Summary of Equipment Under Test Product Name : Model Number : 50PK950-UA Serial Number : Manufacturer : Country of origin : Rating : Receipt Date : X-tal list(s): 2.2 General descriptions of EUT Report Number : ESTF151002-007 , Web : www. estech. co. kr Page 4 of 15 PLASMA TV/MONITOR NONE LG Electronic Inc. KOREA INPUT: AC100-240 V ~ 50 /60 Hz 8-Feb-10 4 MHz, 10 MHz, 25 MHz, 54 MHz EST-QP-20-01(0)-(F15) 3. Test Standards Test Standard : FCC PART 15 (2008) & ICES-003 Test Method : ANSI C 63.4 (2003) This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and AC power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain decides that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment These method apply to the measurement of individual units or systems comprised of multiple units TThis Standard sets out the regulations under which an intentional, unintentional, or incidental radiator may be operated without an individual license. It also contains the technical specifications, administrative requirements and other conditions relating to the marketing of Part 15 devices. Report Number : ESTF151002-007 , Web : www. estech. co. kr Page 5 of 15 EST-QP-20-01(0)-(F15) 4. Measureme…

Text truncated - open the document above for the full version.

TEST SETUP PHOTO 1. Conducted Emission setup photo 1.1. Front 1.2. Rear 2. Radiated Emission setup photo 2.1 Front 2.2. Rear