BEJ52LG70UALCD TV/MONITOR

Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. LCDTV PLASMA TV OWNER’S MANUAL LCD TV MODEL 32LG30 37LG50 37LG30 42LG50 42LG30 47LG50 52LG50 32LG60 32LG70 37LG60 42LG70 42LG60 47LG70 47LG60 52LG70 52LG60 PLASMA TV MODELS 42PG60 50PG60 60PG60 P/NO : SAC30708020 (0801-REV01) www.lgusa.com / www.lg.ca As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). 1 WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera- ture accompanying the appliance. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. 2 IMPORTANT SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction: Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat. When mounting a TV it on the wall, make sure not to install TV by the hanging power and sig- nal cables on the back of the TV. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus when unused for long periods of time. 1 2 3 4 5 6 7 8 9 3 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Never touch this apparatus or antenna during a thunder or lighting storm. Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. Refer all servicing to qualified service p…

Text truncated - open the document above for the full version.

WATCHING TV / CHANNEL CONTROL 56 CHANNEL SETUP WATCHING TV /CHANNEL CONTROL Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. Select CCHHAANNNNEELL . Select AAuuttoo TTuunniinngg . Select YYeess . Run AAuuttoo ttuunniinngg . Enter Move CHANNEL Enter Move CHANNEL 1 MENU 3 2 ENTER ENTER 4 ENTER Auto Tuning Manual Tuning Channel Edit Auto Tuning Manual Tuning Channel Edit Press ‘Yes’ button to begin auto tuning. Ye s No  A password is required to gain access to Auto Tuning menu if the Lock System is turned on. 5 RETURN Return to the previous menu. MENU Return to TV viewing. WATCHING TV / CHANNEL CONTROL 57 Select CCHHAANNNNEELL . 1 MENU 2 ENTER If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. Add/Delete Channel (Manual Tuning) Enter Move CHANNEL Enter Move CHANNEL Channel Select channel type and RF-channel number. FF DTV GG 2 Close Delete Auto Tuning Manual Tuning Channel Edit DTV 2-0 Bad Normal Good Select MMaannuuaall TTuunniinngg . Select DDTTVV , TTVV , CCAADDTTVV , or CCAATTVV . Select channel you want to add or delete. 3 ENTER 4 Select AAdddd or DDeelleettee . 5 ENTER Auto Tuning Manual Tuning Channel Edit  A password is required to gain access to Manual Tuning menu if the Lock System is turned on. 6 RETURN Return to the previous menu. MENU Return to TV viewing. WATCHING TV / CHANNEL CONTROL 58 CHANNEL SETUP WATCHING TV / CHANNEL CONTROL Select a channel. Select channel you want to add or delete. 3 ENTER 4 ENTER From the default channel list created from the Auto Tuning channel search, you can create two different types of channel lists in memory: “custom list” and “favorite channel list”. A custom list can be created by toggling each channel on or off with ENTERbutton. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top- right corner of the screen. Channel Editing Enter Move CHANNEL Auto Tuning Manual Tuning Channel Edit Select CCHHAANNNNEELL . 1 MENU 2 ENTER Select CChhaannnneell EEddiitt . RETURN Return to TV viewing. Return to the previous menu. 5 MENU Add/Delete Move Page CH Move Previous MENU Exit RETURN WATCHING TV / CHANNEL CONTROL 59 INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Select the desired input source. 1 INPUT  You can also select the desired input source in the IINNPPUUTT menu (Except 32/37/42 LG30). AntennaCableAV1AV2Component1 HDMI4HDMI3HDMI2HDMI1RGB-PC Component2 AntennaCableAV1AV2Component1 ENTER  AAnntteennnnaa : Select it to watch over-the-air broadcasts.  CCaabbllee : Select it to watch cable and dig- ital cable.  AAVV 11--22 : Select them to watch a VCR or other external equipment.  CCoommppoonneenntt 11--22 : Select them to watch DVD or a Digital set-top box.  RRGGBB--PPCC : Select it to view PC input.  HHDDMMII11--44 : Select them to watch high definition devices. Enter Move Antenna Cable AV1 AV2 Component1 Component2 RGB-PC HDMI1 INPUT E Except 32/37/42LG30, 37/42/47/52LG50 AntennaCableAV1AV2Component1 Input Label Q.MENU Exit RETURN Select a desired input source (except AAnntteennnnaa or CCaabbllee ). Then, you can select your desired Input Label with using Q. MENU button. GG pp..6600 Disconnected input is inactivated. ie) WATCHING TV / CHANNEL CONTROL 60 INPUT LABEL WATCHING TV / CHANNEL CONTROL You can set a label for each input source when it's not in use. Enter Move OPTION Enter Move OPTION Language: English Input Label SIMPLINK: On Key Lock: Off Caption: Off ISM Method: Normal Power Saving: Level 0 Set ID: 1 Language: English Input Label SIMPLINK: On Key Lock: Off Caption: Off ISM Method: Normal Power Saving: Level 0 Set ID: 1 AV1 AV2 Component1 Component2 RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 FFGG Close EEEE Except 32/37/42LG30, 37/42/47/52LG50 Select OOPPTTIIOONN . Select IInnppuutt LLaabbeell . Select the label. 1 MENU 2 ENTER Select the source. 3 ENTER 4 5 RETURN Return to the previous menu. MENU Return to TV viewing. With using OPTION menu Select the source. Select the label. 1 INPUT 2 Q. MENU 3 RETURN Return to the previous menu. MENU Return to TV viewing. With using INPUT button  When new external device is connected, this popup menu is displayed automatically. If selecting YYeess , you can select input source that you want to appreciate.  But, when selecting “ SSIIMMPPLLIINNKK - OOnn ” in HDMI mode, this popup menu is may not displayed. No Yes ! New external device is connected. Do you want to enjoy this? ! Select input source that you want to appreciate. AV1 AV2 Component1 WATCHING TV / CHANNEL CONTROL 61 AV MODE You can select the optimal images and sounds. 1 AV MODE 2 OffCinema GameSport Press the AAVV MMOODDEE button repeatedly to select the desired source. ENTER  If you select “ CCiinneemmaa ” in AV mode, CCiinneemmaa will be selected both for “PIC- TURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively.  If you select “ OOffff ” in AV mode, the “ PPiiccttuurree MMooddee ” and “ SSoouunndd MMooddee ” return to previous selected value. WATCHING TV / CHANNEL CONTROL 62 WATCHING TV / CHANNEL CONTROL This function operates only with devices with the logo. If connected other brand device with the logo, it may not work. This allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. To start using SIMPLINK, turn it on in the user menus. Enter Move OPTION Select OOPPTTIIOONN . Select SSIIMMPPLLIINNKK . Select OOnn or OOffff . Enter Move OPTION E 1 MENU 3 2 ENTER ENTER Language: English Input Label SIMPLINK: On Key Lock: Off Caption: Off ISM Method: Normal Power Saving: Level 0 Set ID: 1 Language: …

Text truncated - open the document above for the full version.

LG Electronics USA Date:Feb 4,2008 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Jin-Mo Yang,Engineering Manager of ESTECH Co., Ltd. and hereafter referred to as ESTECH, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jin-Mo Yang,Engineering Manager of ESTECH Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ESTECH as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Mr.Daniel Kim,General Manager LG Electronics USA. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

1000 Sylvan Avenue Englewood Cliffs, NJ 07632 TEL : +847-941-8373 Federal Communications Commission Authorization and Evaluation Division FCC ID : BEJ52LG70UA Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Curcuit Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the data of the Grant for this application. Sincerely, Mr.Daniel Kim,General Manager LG Electronics USA. TEL : +847-941-8373

BEJ52LG70UA

6.3 Test data Test Date : Lisn (dB) Cable (dB) Limit (dB㎶) Reading (dB㎶) Result (dB㎶) Limit (dB㎶) Reading (dB㎶) Result (dB) 0.150.170.0 H 65.94 44.11 44.32 55.94 37.16 37.37 0.170.160.0N 64.86 41.65 41.85 54.86 32.32 32.52 0.190.160.0 H 64.26 40.54 40.74 54.26 35.25 35.45 0.200.150.0N 63.65 41.00 41.20 53.65 28.48 28.68 0.210.150.0 H 63.21 40.52 40.71 53.21 28.37 28.56 0.230.140.0 H 62.60 38.73 38.92 52.60 25.70 25.89 0.870.190.1N 56.00 23.52 23.85 46.00 18.08 18.41 0.990.250.2N 56.00 23.87 24.28 46.00 19.30 19.71 1.250.260.2 H 56.00 23.97 24.41 46.00 19.11 19.55 1.580.270.2N 56.00 26.15 26.64 46.00 21.12 21.61 1.640.280.2 H 56.00 26.10 26.59 46.00 20.96 21.45 1.940.290.2 H 56.00 23.70 24.23 46.00 19.15 19.68 5.890.420.5N 60.00 22.87 23.82 50.00 17.75 18.70 6.020.420.5 H 60.00 22.77 23.73 50.00 16.01 16.97 13.520.780.9 H 60.00 24.37 26.06 50.00 18.61 20.30 13.980.790.9 H 60.00 24.27 25.99 50.00 18.85 20.57 15.610.841.0N 60.00 22.65 24.49 50.00 16.24 18.08 19.460.921.1N 60.00 23.08 25.14 50.00 17.02 19.08 Remark 1-Feb-08 Frequency (MHz) Correction Factor Line (H/N) Quasi-peak Value H : Hot Line, N : Neutral Line *After connect with ferrite cores to RGB cable,tested conducted emission. Report Number : ESTF150802-002 , Web : www. estech. co. kr Page 12 of 15 Average Value 7. Photographs of test setup 7.1 Setup for Radiated Test : 30 ~ 1000 MHz [ Front ] [ Rear ] Report Number : ESTF150802-002 , Web : www. estech. co. kr Page 13 of 15 7.2 Setup for Conducted Test : 0.15 ~ 30 MHz [ Front ] [ Rear ] Report Number : ESTF150802-002 , Web : www. estech. co. kr Page 14 of 15 8. Photographs of EUT [ Front ] [ Rear ] Report Number : ESTF150802-002 , Web : www. estech. co. kr Page 15 of 15 Appendix 1. Spectral diagram *HOT 150 kHz30 MHz 1 PK CLRWR 2 AV CLRWR SGL TDF 6DB dBμV dBμV RBW 9 kHz MT 1 s PREAMP OFFAtt 10 dB AUTO PRN 1 MHz10 MHz 0 10 20 30 40 50 60 70 80 90 LIMIT CHECK PASS EN55022A EN55022Q Comment: 52LG70-UA_HOT Date: 1.FEB.2008 10:05:17 *NEUTRAL 150 kHz30 MHz 1 PK CLRWR 2 AV CLRWR SGL TDF 6DB dBμV dBμV RBW 9 kHz MT 1 s PREAMP OFFAtt 10 dB AUTO PRN 1 MHz10 MHz 0 10 20 30 40 50 60 70 80 90 LIMIT CHECK PASS EN55022A EN55022Q Comment: 52LG70-UA_NEUTRAL Date: 1.FEB.2008 10:10:07