BEJ60PX950UAPlasma monitor

OWNER’S MANUALLED LCD TV / PLASMA TV Please read this manual carefully before operatingyour set and retain it for future reference. P/NO : SAC34134205 (1006-REV03) www.lg.com The model and serial number of the TV is located on the back and/or one side of the TV. Record it below should you ever need service. MODELSERIAL LED LCD TV MODELS47LX950055LX950047LEX855LEX860LEX972LEX9 PLASMA TV MODELS50PK95060PK95050PX95060PX950 2 WARNING / CAUTION The lightning flash with arrowhead symbol, within an equilateral trian- gle, is intended to alert the user to the presence of uninsulated “dan- gerous voltage” within the product’s enclo- sure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equi- lateral triangle is intended to alert the user to the presence of important oper- ating and maintenance (servicing) instruc- tions in the literature accompanying the appliance. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guide- lines for proper grounding and, in particular, speci- fies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC Notice Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro- tection against harmful interference in a residen- tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equip- ment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is con- nected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi- tions: (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device). Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. 3 SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 Do not use this apparatus near water. 2 Clean only with dry cloth. 3 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 4 Do not install near any heat sources such as radiators, heat registers, stoves, or other appa- ratus (including amplifiers) that produce heat. 5 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec- trician for replacement of the obsolete outlet. 6 Protect the power cord from being walked on or pinched particularly at plugs, conve- nience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories speci- fied by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 9 Unplug this apparatus during lighting storms or when unused for long periods of time. 10 Refer all servicing to qualified service per- sonnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is dam- aged, liquid has been spilled or objects have fallen into the apparatus, the appara- tus has been exposed to rain or moisture, does not operate normally, or has been dropped. IMPORTANT SAFETY INSTRUCTIONS 4 SAFETY INSTRUCTIONS 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. 14 CAUTION concerning the Power Cord: It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appli- ance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loos…

Text truncated - open the document above for the full version.

61 WATCHING TV / CHANNEL CONTROL TURNING ON THE TV CHANNEL SELECTION VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. ᯫ In standby mode to turn TV on, press the/ I,INPUT,CH (ᰜorᰝ) button on the TV or press the , INPUT, CH (ᰜorᰝ),Number (0-9) button on the remote control. 2 Select the viewing source by using the INPUT button on the remote control. 3 When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode. ! NOTE Ź If you intend to be away on vacation, disconnect the power plug from the wall power outlet. Ź If you do not complete the Initial setting, it will appear whenever the TV is switched on until the Initial setting procedure is completed. 1 Press the CH (ᰜorᰝ) or NUMBER buttons to select a channel number. 1 Press the VOL (+ or-) button to adjust the volume. 2 If you want to switch the sound off, press the MUTE button. 3 You can cancel the Mute function by pressing the MUTE or VOL (+ or-)button. WATCHING TV / CHANNEL CONTROL WATCHING TV / CHANNEL CONTROL 62 Step 1. Selecting Language Step 2. Mode setting INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. ᯫ Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best picture in your home environment. ᯫ “Store Demo” Mode is only intended for use in retail environments. Customers can adjust the “Picture menu - Picture mode” manually while inspecting the TV, but the TV will automatically return to preset in-store mode after 5 minutes. ᯫ “Store Demo” Mode is an optimal setting for displaying at stores. “Store Demo” mode initializes the TV to set the image quality. 6WHS0RGH6HWWLQJ 6HOHFWLQJWKHHQYLURQPHQW &KRRVHWKHVHWWLQJPRGH\RXZDQW 6HOHFW>+RPH8VH@ZKHQVHWWLQJ79XS LQKRPH<RXFDQDGMXVWSLFWXUHTXDOLW\ DFFRUGLQJO\WKURXJK3LFWXUH0RGHPHQX RSWLRQ :(/&20( 7KDQN\RXIRUFKRRVLQJ/* 6WHS/DQJXDJH (QJOLVK (VSDñol )UDQ«DLV 䭢⍴㮻 L +RPH8VH6WRUH'HPR ؒ'HPR0RGH2II For LED LCD TV 1 ENTER Select Menu Language. 1 ENTER SelectHome Use. ᯙ1H[W ᯙ1H[Wᰙ3UHYLRXV ܁ 2II ۽ 63 WATCHING TV / CHANNEL CONTROL Step 4. Time Zone Step 5. Auto Tuning 6WHS7LPH=RQH 6WHS$XWR7XQLQJ %HIRUHVWDUWLQJ EHVXUHWKDWWKH 79DQWHQQDLVFRQQHFWHG Step 3. Power Indicator (For LED LCD TV) 6WHS3RZHU,QGLFDWRU ᯫ This function is disable in “Step2. Mode Setting - Store Demo”. 1 ENTER SelectOn or Off. 1 ENTER SelectTime Zone option. 2 ENTER SelectDaylight Saving option. 1 ENTER Check your antenna connec- tion and start Auto Tuning. 6WDQGE\/LJKW ܁ 2II ۽ ۽ ᯙ1H[Wᰙ3UHYLRXV ᯙ1H[W ᯙ1H[W ᰙ3UHYLRXV ᰙ3UHYLRXV 7LPH=RQH ܁ (DVWHUQ ۽ 'D\OLJKW6DYLQJ ܁ Auto ۽ ۽ WATCHING TV / CHANNEL CONTROL WATCHING TV / CHANNEL CONTROL 64 &+$11(/ 237,21 3,&785( $8',2 7,0( /2&. ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 3,&785( ᯒ0RYHᯙ(QWHU ؒ$VSHFW5DWLR  ؒ3LFWXUH:L]DUG ؒᰚ(QHUJ\6DYLQJ2II ؒ3LFWXUH0RGH 6WDQGDUG  ؒ%DFNOLJKW   ؒ&RQWUDVW   ؒ%ULJKWQHVV   ؒ6KDUSQHVV  7,0( ᯒ0RYHᯙ(QWHU ؒ&ORFN ؒ2II7LPH2II ؒ2Q7,PH2II ؒ6OHHS7LPHU2II /2&. ᯒ0RYHᯙ(QWHU ؒ6HW3DVVZRUG ؒ/RFN6\VWHP 2Q  ؒ%ORFN&KDQQHO  ؒ0RYLH5DWLQJ  ؒ795DWLQJ&KLOGUHQ  ؒ795DWLQJ*HQHUDO  ؒ'RZQORDGDEOH5DWLQJ  ؒ,QSXW%ORFN ؒ6HW3DVVZRUG ؒ/RFN6\VWHP 2Q  ؒ%ORFN&KDQQHO  ؒ795DWLQJ(QJOLVK  ؒ795DWLQJ)UHQFK  ؒ'RZQORDGDEOH5DWLQJ  ؒ,QSXW%ORFN ؒ.H\/RFN2II 237,21 ᯒ0RYHᯙ(QWHU ؒ/DQJXDJH ؒ&DSWLRQ2II ؒ3RZHU,QGLFDWRU ؒ,QLWLDO6HWWLQJ ؒ6HW,' ؒ0RGH6HWWLQJ +RPH8VH ؒ,5%ODVWHU2II $8',2 ᯒ0RYHᯙ(QWHU ؒ$XWR9ROXPH 2II ؒ&OHDU9RLFH,, 2IIᰕ3 ؒ%DODQFH ؒ6RXQG0RGH 6WDQGDUG ؒ ,QILQLWH6RXQG2II  ؒ7UHEOH  ؒ%DVV  ؒ5HVHW /R &+$11(/ ᯒ0RYHᯙ(QWHU ؒ$XWR7XQLQJ ؒ0DQXDO7XQLQJ ؒ&KDQQHO(GLW 1 MENU Display each menu. 2 ENTER Select a menu item. 3 ENTER Accept the current selection. 4 EXIT Return to TV viewing. ! NOTE ŹISM Method: For Plasma TV. ŹBacklight, TruMotion, LED Local Dimming, Power Indicator: For LED LCD TV. ᯫ For further information, refer to the optional “Wireless Media Box” manual for operating instructions. For USA For Canada 65 WATCHING TV / CHANNEL CONTROL ,1387 0<0(',$ 30 Today *$0(6&+('8/( ,QSXW/LVW ᯒ0RYH ᯙ(QWHU 7986%86%$9$9&RPSRQHQW &RPSRQHQW5*%3&+'0,+'0,+'0,+'0, ᯕ,QSXW/DEHOᰙ([LW 0RYLH/LVW 0<0(',$ 3KRWR/LVW 0XVLF/LVW 1(7:25. 1(7:25. ᯒ0RYHᯙ(QWHU ؒ1HWZRUN6HWWLQJ 1RQH ؒ1HWZRUN6WDWXV 1RWFRQQHFWHG ؒ/HJDO1RWLFH ؒ(61 :25/'7,0( 6&+('8/(-803+2/(,121( :+$&.$02/( 68'2.8-,*6$: &22.,1*%85*(5 %$//221+817(5 6$9,1*&5<67$/ ,19$'(5 85*(176859,9$/ ᰿([LW *$0(6&+('8/( WATCHING TV / CHANNEL CONTROL WATCHING TV / CHANNEL CONTROL 66 A ᯙ $VSHFW5DWLR QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. 1 ENTERENTER SelectQuick Menu. 2 ENTER Select a menu item. 3 ENTER SelectClose. 4XLFN0HQX &KDQQHO/LVW 1HWFDVW 6FUHHQ5HPRWH +RPH0HQX ᰙ&ORVH ᰑAspect Ratio: Selects your desired picture format. ᰗPicture Mode: Selects the desired preset picture setting. ᰘSound Mode: Selects the desired preset sound setting. ᰄMulti Audio: Changes the audio language (Digital signal). ᰄSAP: Selects MTS sound (Analog signal). ᯴Sleep Timer: Select the amount of time before your TV turns off automatically. ᰃDel/Add: Select channel you want to add or delete. ᰔCaption: Select on or off. ᯲USB Device: Select “Eject” in order to eject a USB device. ᯫ Quick Menu can be selected either by pressing the Q.MENU button on…

Text truncated - open the document above for the full version.

PICTURE CONTROL 131 For LED LCD TV 9 ENTER Adjust Horizontal Sharpness. 10 ENTER Adjust Vertical Sharpness. 11 ENTER Adjust Backlight. 8 ENTER Adjust Color. 12 FAV MARK CHAR/NUM Select input source to apply the settings. 13 ENTER Save. 14 ENTER Finish the Picture Wizard. ᯫ If you stop the Picture Wizard before the final step, the changes will not be saved to the TV. ᯫ Once the Picture Wizard sets the picture quality, Energy Saving is changed to Off automatically. ᯫ To reset changes made by Picture Wizard, operate Picture Reset when Picture Mode is on Expert1. &RORU 6HWWKHVFUHHQDERYHLGHQWLFDOWRWKH5HFRPPHQGHGVDPSOH EHORZ ؒ&RORU /RZ+LJK5HFRPPHQGHG ᰙ3UHYLRXVᯙ1H[W ۽܁ +RUL]RQWDO6KDUSQHVV 6HWWKHVFUHHQDERYHLGHQWLFDOWRWKH5HFRPPHQGHGVDPSOH EHORZ ؒ+6KDUSQHVV /RZ+LJK5HFRPPHQGHG ᰙ3UHYLRXVᯙ1H[W ۽܁ 9HUWLFDO6KDUSQHVV 6HWWKHVFUHHQDERYHLGHQWLFDOWRWKH5HFRPPHQGHGVDPSOH EHORZ ؒ96KDUSQHVV /RZ+LJK5HFRPPHQGHG ᰙ3UHYLRXVᯙ1H[W ۽܁ %DFNOLJKW 6HWWKH%DFNOLJKWWR\RXU%ULJKWQHVVSUHIHUHQFH ؒ%DFNOLJKW 'DUN%ULJKW5HFRPPHQGHG ᰙ3UHYLRXVᯙ1H[W ۽܁ &RPSOHWH 6HOHFW DQ LQSXW V WRDSSO\WKHVHWWLQJV ᯡ'TV ۳TV ۳$9 ۳$9 ۳&RPSRQHQW ۳&RPSRQHQW ۳5*%3& ᯡ+'0, ᯡ+'0, ᯡ+'0, ᯡ+'0, :DUQLQJ7KHSLFWXUHTXDOLW\PD\YDU\DFFRUGLQJWRWKHGLIIHUHQWW\SHVRI VLJQDODQGLQSXWV ᰙ3UHYLRXVᯙ&RQILUP ᯐ0RYH᱅0DUN i.e) &ORVH 7KHFXUUHQWDGMXVWPHQWYDOXHLV VDYHGWR([SHUW L PICTURE CONTROL PICTURE CONTROL 132 ᰚENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by adjusting the Picture Mode. ᯫ When selecting Screen off, the screen will turn off after 3 seconds. Pressing any button of the remote controller will turn on the screen again. ᯫ If you adjust “Energy Saving-Auto, Maximum”, Backlight option will not work (For LED LCD TV). ᯫ When selecting “Energy Saving - Off,Minimum, or Medium, you can adjust Backlight feature (For LED LCD TV). ᯫ If you adjust “Energy Saving- Intelligent Sensor”, Sharpness, Color, Color Temperature feature will not work (For Plasma TV). ᯫ When selecting Auto,Backlight is automatically adjusted through Intelligent Sensor according to the surrounding conditions. (For LED LCD TV) ᯫ When selecting Off,Energy Saving is not used. ᯫ Press the ENERGY SAVING button repeatedly to select the appropriate Energy Saving. ᯫ You can also adjust Energy Saving in the PICTURE menu. ᯫ Intelligent Sensor: The most suitable picture is automatically adjusted according to the surrounding condi- tions (For Plasma TV). 3UHVVEXWWRQWRUXQWKHVHOHFWHG IXQFWLRQ 6FUHHQ5HPRWH (QHUJ\ 6DYLQJ $902'( ,1387 )$9 40(18 6,03/,1. (QWHU &ORVH  /,67 )/$6+%.   4  8   (1(5*< 6$9,1* 1 ENTER ENTER SelectScreen Remote. 2 ENTER SelectENERGY SAVING. 3 ENTER SelectENERGY SAVING repeatedly to select your desired menu option. +RPH0HQX 4XLFN0HQX &KDQQHO/LVW 1HWFDVW 6FUHHQ5HPRWH PICTURE CONTROL 133 PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor. 1 MENU SelectPICTURE. 2 ENTER SelectPicture Mode. 3 ENTER Select your desired menu option. 4 BACK Return to the previous menu. EXIT Return to TV viewing. Other models Plasma TV PICTURE ᯒ0RYHᯙ(QWHU ؒ$VSHFW5DWLR  ؒ3LFWXUH:L]DUG ؒᰚ(QHUJ\6DYLQJ2II ؒ3LFWXUH0RGH 6WDQGDUG  ؒ%DFNOLJKW   ؒ&RQWUDVW   ؒ%ULJKWQHVV   ؒ6KDUSQHVV  ᯐ ᯙ ᯫ Vivid,Standard,Cinema,Sport, and Game Settings are preset for the optimum picture quality at the factory. ᯫ Vivid: This is the mode to maximize the effect of the video in the retail store. Strengthen the contrast, brightness, color and sharpness for vivid picture. ᯫ Standard: This is the mode to realize optimum viewing condition for the general user. ᯫ ᰽ (Auto Power Saving): This is the mode to maximize reducing the power consumption without hurting the picture quality. This fea- tures is available only on Plasma TV. ᯫ Cinema: This mode optimizes video for watch- ing movies. ᯫ ᯷Cinema: This is cinema quality mode to provide you the experience of watching a movie at home. The user will be able enjoy the best level of satisfactory screen quality in any movie without any separate adjustments. ᯷Cinema express the optimal screen quality when it is darkest.  When selecting ᯷Cinema, Aspect ratio changes to Just scan. ᯫ ᯷Bright Room: This is the specification to optimize TV viewing in Bright Room.  When selecting ᯷Bright Room, Aspect ratio changes to Just scan. ᯫ Sport: This is the video mode to emphasize dynamic video and primary color (e.g, white, uniform, grass, sky blue etc.) by realizing the optimal screen for sports. ᯫ Game: This is the mode to realize fast response speed in a fast gaming screen. ᯫ Expert: This is the mode to adjust the video in detail for video quality expert and general user. ᯫ You can also adjust Picture Mode in the Q.MENU. ᯫ When selecting Intelligent Sensor,Energy Saving is changed to Auto automatically (For LED LCD TV). ᯫ When selecting Intelligent Sensor, it changes Backlight, contrast, brightness, sharpness, color, tint and color temperature automatically (For LED LCD TV). ᯫ Intelligent Sensor: The most suitable picture is automatically adjusted according to the sur- rounding conditions. ۳9LYLG ᯡ 6WDQGDUG ۳ ᰽ ۳᯷&LQHPD ۳᯷%ULJKW5RRP ۳6SRUW ۳*DPH ۳ᰛ([SHUW ۳ᰛ([SHUW ᯐ ᯙ ۳,QWHOOLJHQW6HQVRU ۳9LYLG ᯡ 6WDQGDUG ۳᯷&LQHPD ۳᯷%ULJKW5RRP ۳6SRUW ۳*DPH ۳ᰛ([SHUW ۳ᰛ([SHUW ᯐ ᯙ PICTURE CONTROL PICTURE CONTROL 134 MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. 1 MENU SelectPICTURE. 2 ENTER SelectPicture Mode. 3 ENTER Select your desired menu option. 4 ENTER Select Backlight (For LED LCD TV), Contrast,Brightness,Sharpness,Color, Ti…

Text truncated - open the document above for the full version.

LG Electronics USA Date: Jun 29, 2010 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Jin-Mo Yang,Engineering Manager of ESTECH Co., Ltd. and hereafter referred to as ESTECH, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jin-Mo Yang,Engineering Manager of ESTECH Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ESTECH as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Mr. Jae Cheon Lee,General Manager LG Electronics USA. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

INTERNAL PHOTO 1. MAIN 1.1 Front 1.2 Rear 2. Power 2.1 Front 2.2 Rear 3. PDP 3.1 Front 3.2 Rear 4. CTRL 4.1 Front 4.2 Rear 5. CTRL SUB 5.1 Front 5.2 Rear 6. YSUS 6.1 Front 6.2 Rear 7. ZSUS 7.1 Front 7.2 Rear 8. ZSUS SUB 8.1 Front 8.2 Rear 9.LED 9.1 Front 9.2 Rear 10.IR 10.1 Front 10.2 Rear 11.XRCBT 11.1 Front 11.2 Rear 12.XRLBT 12.1 Front 12.2 Rear 13.YDRVBT 13.1 Front 13.2 Rear 14.RF Module 14.1 Front 14.2 Rear 15.YDRVTP 15.1 Front 15.2 Rear 16. XLBT 16.1 Front 16.2 Rear 17. TUNER(See main board)

Test Report for FCC FCC ID:BEJ60PX950UA Company name Address Telephone Product name Model name Serial number Test date Testing location Standard □ Class A ■ Class B Test resultOK □ Class A ■ Class B Test resultOK Tested by Reviewed by Abbreviation * Note - Basic model: 60PX950-UA Multi model: 60PX950-UF - 60PX950-UA and 60PX950-UF are same product , only model name is different. - This test report is not permitted to copy partly without our permission - This test result is dependent on only equipment to be used - This test result based on a single evaluation of one sample of the above mentioned Senior Engineer H.H.LEE 94696 LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs, NJ 07632 847-941-8373 PLASMA TV/MONITOR ESTECH. Co., Ltd. 97-1 Hoiuk-Ri Majang-Myon, Icheon-city, KyungKi-Do, Korea LG Electronics Inc. KOREA Report Number : ESTF151006-007 , Web : www. estech. co. kr Page 1 of 15 OK, Pass = Passed, Fail = Failed, N/A = not applicable ■ Radiated Emission 24-Jun-10 Engineering Manager J.M.Yang (Signature) (Signature) Test item ■ Conducted Emission Date of issue29-Jun-10 60PX950-UA FCC PART 15 (2008) & ICES-003 , ANSI C 63.4 2003 Measurement facility registration number Report NumberESTF151006-007 Manufacturer Country of origin Applicant Product NONE EST-QP-20-01(0)-(F15) 3 4 5 6 8 8 8 9 10 11 11 11 12 13 15 Appendix 1. Spectral diagram 5.3 Test data ................................................................................................ ... 7. Photographs of test setup ................................................................................. 8. Photographs of EUT .......................................................................................... 6. Measurement of conducted emission .................................................................. 6.1 Measurement equipment .............................................................................. 6.2 Environmental conditions .............................................................................. 6.3 Test data ................................................................................................... Report Number : ESTF151006-007 , Web : www. estech. co. kr Page 2 of 15 5. Measurement of radiated emission ..................................................................... 5.1 Measurement equipment .............................................................................. Contents 1. Laboratory Information .................................................................................... 2. Descri ption of EUT .......................................................................................... 3. Test Standards ................................................................................................ 4. Measurement condition .................................................................................... 5.2 Environmental conditions .............................................................................. 5.4 Test data ................................................................................................... EST-QP-20-01(0)-(F15) 1. Laboratory Information 1.1 General 1.2 Test Lab. Corporation Name : ESTECH Co., Ltd. Head Office : Rm 1015, World Venture Center II, 426-5, Gasan-dong, Geumcheon-gu, Seoul, Korea (Safety & Telecom. Test Lab) EMC Test Lab : 97-1, Hoeok-ri, Majang-myun, Ichion-city, Kyonggi-do, South Korea 1.3 Official Qualification(s) KCC : Granted Accreditation from Ministry of Information & Communication for EMC, Safety and Telecommunication KOLAS : Accredited Lab By Korea Laboratory Accreditation Schema base on CENELEC requirements FCC : Filed Laboratory at Federal Communications Commission VCCI : Granted Accreditation from Voluntary Control Council for Interference from ITE This EUT (Equipment Under Test) has been shown to be capable of compliance with the applicable technical standards and is tested in accordance with the measurement procedures as indicated in this report.ESTECH Lab attests to accuracy of test data. All measurement reported herein were performed by ESTECH Co., Ltd. ESTECH Lab assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report Number : ESTF151006-007 , Web : www. estech. co. kr Page 3 of 15 EST-QP-20-01(0)-(F15) 2. Description of EUT 2.1 Summary of Equipment Under Test Product Name : Model Number : 60PX950-UA Serial Number : Manufacturer : Country of origin : Rating : Receipt Date : X-tal list(s): 2.2 General descriptions of EUT Report Number : ESTF151006-007 , Web : www. estech. co. kr Page 4 of 15 PLASMA TV/MONITOR NONE LG Electronic Inc. KOREA AC(100 - 240) V , (50 - 60) Hz 15-Jun-10 4 MHz, 10 MHz, 54 MHz EST-QP-20-01(0)-(F15) 3. Test Standards Test Standard : FCC PART 15 (2008) & ICES-003 Test Method : ANSI C 63.4 (2003) This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and AC power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain decides that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment These method apply to the measurement of individual units or systems comprised of multiple units TThis Standard sets out the regulations under which an intentional, unintentional, or incidental radiator may be operated without an individual license. It also contains the technical specifications, administrative requirements and other conditions relating to the marketing of Part 15 devices. Report Number : ESTF151006-007 , Web : ww…

Text truncated - open the document above for the full version.

TEST SETUP PHOTO 1. Conducted Emission setup photo 1.1. Front 1.2. Rear 2. Radiated Emission setup photo 2.1 Front 2.2. Rear