BEJ60PZ750UAPlasma Monitor

P/NO : SAC34134203 (1010-REV09) www.lg.com The model and serial number of the TV is located on the back and/or one side of the TV. Record it below should you ever need service. MODELSERIAL OWNER’S MANUALLED LCD TV / LCD TV PLASMA TV Please read this manual carefully before operatingyour set and retain it for future reference. LCD TV MODELS32LD55042LD55046LD55052LD55060LD550 47LD65055LD650 LED LCD TV MODELS32LE540042LE540047LE540055LE540042LE535047LE5350 42LE550047LE550055LE550042LE750047LE750055LE7500 47LE850055LE850042LX650047LX650055LX6500 PLASMA TV MODELS50PK75060PK75050PZ75060PZ750 50PZ54060PZ54050PZ55060PZ550 2 WARNING / CAUTION The lightning flash with arrowhead symbol, within an equilateral trian- gle, is intended to alert the user to the presence of uninsulated “dan- gerous voltage” within the product’s enclo- sure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equi- lateral triangle is intended to alert the user to the presence of important oper- ating and maintenance (servicing) instruc- tions in the literature accompanying the appliance. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guide- lines for proper grounding and, in particular, speci- fies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC Notice Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro- tection against harmful interference in a residen- tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equip- ment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is con- nected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi- tions: (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device). Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. 3 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 Do not use this apparatus near water. 2 Clean only with dry cloth. 3 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 4 Do not install near any heat sources such as radiators, heat registers, stoves, or other appa- ratus (including amplifiers) that produce heat. 5 Do not defeat the safety pur- pose of the polarized or ground- ing-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electri- cian for replacement of the obsolete outlet. 6 Protect the power cord from being walked on or pinched particularly at plugs, conve- nience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/acces- sories specified by the manu- facturer. 8 Use only with the cart, stand, tripod, bracket, or table speci- fied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/appara- tus combination to avoid injury from tip-over. 9 Unplug this apparatus during lighting storms or when unused for long periods of time. 10 Refer all servicing to qualified service per- sonnel. Servicing is required when the appa- ratus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not oper- ate normally, or has been dropped. 11 Never touch this apparatus or antenna dur- ing a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. 14 CAUTION concerning the Power Cord: It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appli- ance and has no additional outlets or branch circuits. Check the specification page of this owner's manua…

Text truncated - open the document above for the full version.

69 WATCHING TV / CHANNEL CONTROL &+$11(/ 237,21 3,&785( $8',2 7,0( /2&. ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 3,&785( ᯒ0RYHᯙ(QWHU ؒ$VSHFW5DWLR  ؒ3LFWXUH:L]DUG ؒᰚ(QHUJ\6DYLQJ2II ؒ3LFWXUH0RGH 6WDQGDUG  ؒ%DFNOLJKW   ؒ&RQWUDVW   ؒ%ULJKWQHVV   ؒ6KDUSQHVV  7,0( ᯒ0RYHᯙ(QWHU ؒ&ORFN ؒ2II7LPH2II ؒ2Q7,PH2II ؒ6OHHS7LPHU2II /2&. ᯒ0RYHᯙ(QWHU ؒ6HW3DVVZRUG ؒ/RFN6\VWHP 2Q  ؒ%ORFN&KDQQHO  ؒ0RYLH5DWLQJ  ؒ795DWLQJ&KLOGUHQ  ؒ795DWLQJ*HQHUDO  ؒ'RZQORDGDEOH5DWLQJ  ؒ,QSXW%ORFN ؒ6HW3DVVZRUG ؒ/RFN6\VWHP 2Q  ؒ%ORFN&KDQQHO  ؒ795DWLQJ(QJOLVK  ؒ795DWLQJ)UHQFK  ؒ'RZQORDGDEOH5DWLQJ  ؒ,QSXW%ORFN ؒ.H\/RFN2II 237,21 ᯒ0RYHᯙ(QWHU ؒ/DQJXDJH ؒ&DSWLRQ2II ؒ3RZHU,QGLFDWRU ؒ,QLWLDO6HWWLQJ ؒ6HW,' ؒ0RGH6HWWLQJ +RPH8VH ؒ,5%ODVWHU2II $8',2 ᯒ0RYHᯙ(QWHU ؒ$XWR9ROXPH 2II ؒ&OHDU9RLFH,, 2IIᰕ3 ؒ%DODQFH ؒ6RXQG0RGH 6WDQGDUG ؒ ,QILQLWH6RXQG2II  ؒ7UHEOH  ؒ%DVV  ؒ5HVHW /R &+$11(/ ᯒ0RYHᯙ(QWHU ؒ$XWR7XQLQJ ؒ0DQXDO7XQLQJ ؒ&KDQQHO(GLW 1 MENU Display each menu. 2 ENTER Select a menu item. 3 ENTER Accept the current selection. 4 EXIT Return to TV viewing. ! NOTE ŹISM Method: For Plasma TV. ŹBacklight, TruMotion, LED Local Dimming, Power Indicator: For LED LCD TV/LCD TV. ᯫ For further information, refer to the optional “Wireless Media Box” manual for operating instructions. For USA For Canada WATCHING TV / CHANNEL CONTROL WATCHING TV / CHANNEL CONTROL 70 ,1387 0<0(',$ *$0( ,QSXW/LVW ᯒ0RYH ᯙ(QWHU 7986%86%$9$9&RPSRQHQW &RPSRQHQW5*%3&+'0,+'0,+'0,+'0, ᯕ,QSXW/DEHOᰙ([LW 0RYLH/LVW 0<0(',$ 3KRWR/LVW 0XVLF/LVW 1(7:25. 1(7:25. ᯒ0RYHᯙ(QWHU ؒ1HWZRUN6HWWLQJ 1RQH ؒ1HWZRUN6WDWXV 1RWFRQQHFWHG ؒ/HJDO1RWLFH ؒ(61 -803+2/(,121( :+$&.$02/( 68'2.8 &22.,1*%85*(5 6$9,1*&5<67$/ ,19$'(5 85*(176859,9$/ ᰿([LW *$0( 71 WATCHING TV / CHANNEL CONTROL A ᯙ ܁$VSHFW5DWLR۽ ᯳Aspect Ratio: Selects your desired picture format. ᰗPicture Mode: Selects the desired preset picture setting. ᰘSound Mode: Selects the desired preset sound setting. ᰄMulti Audio: Changes the audio language (Digital signal). ᰄSAP: Selects MTS sound (Analog signal). ᯴Sleep Timer: Select the amount of time before your TV turns off automatically. ᰃDel/Add: Select channel you want to add or delete. ᰔCaption: Select on or off. ᯲USB Device: Select “Eject” in order to eject a USB device. QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. 1 Q.MENU Display each menu. 2 ENTER Make appropriate adjustments. 3 EXIT Return to TV viewing. ᰙ([LW WATCHING TV / CHANNEL CONTROL WATCHING TV / CHANNEL CONTROL 72 CUSTOMER SUPPORT Software Update ᯡ6RIWZDUH8SGDWH ۳3LFWXUH7HVW ۳6RXQG7HVW ۳3URGXFW6HUYLFH,QIR ۳1HWZRUN7HVW &ORVH 6RIWZDUH8SGDWH2Q ؒ&XUUHQW9HUVLRQ  &KHFN8SGDWH9HUVLRQ &ORVH You can update the TV with the latest software to enhance the product operation and/or add new fea- tures. You can update the software by connecting the TV directly to the software update server. The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Center then update your TV. 1 MENU SelectCustomer Support. 2 ENTER SelectSoftware Update. 3 ENTER SelectCheck Update Version to check the newest version. When selecting “Software Update-On” - If the TV is connected to the internet and it finds a software update on the LG server, the update popup menu will appear automatically. - If the updated digital software informa- tion is transmitted, the update popup menu will appear automatically. RED ᯫ The software downloading time will vary depending on the software size and network conditions. ᯫ During the software update proce- dure, do not turn off the TV or dis- connect AC power, or disconnect the LAN cable. ᯫ After software update, you can con- firm the update software version at software Update menu. ᯫ When update is completed, the TV will restart automatically in 5 sec- onds. ᯫ The TV functions may be improved or changed by software update. ᯫ The available time or functionality of NetCast menu may be depends on your ISP network conditions. ᯫ When an update is completed, some CHANNEL, PICTURE, and AUDIO menu settings may need resetting. ᯫ This TV cannot be updated to previ- ous software version. ᯫ Use the “Check Update Version” but- ton to update the latest software on the Network server manually. ᯫ You cannot open NetCast while the software is being updated. 73 WATCHING TV / CHANNEL CONTROL Picture Test/Sound Test This function is a customer support function that can execute picture and sound tests. ۳6RIWZDUH8SGDWH ۳3LFWXUH7HVW ᯡ6RXQG7HVW ۳3URGXFW6HUYLFH,QIR ۳1HWZRUN7HVW &ORVH 1R Yes 'R\RXKDYHDVRXQGSUREOHPLQWKLV VFUHHQ" " 1 MENU SelectCustomer Support. 2 ENTER SelectPicture Test orSound Test. 3 ENTER SelectYe s. 4 BACK Return to the previous menu. EXIT Return to TV viewing. ۳6RIWZDUH8SGDWH ᯡ3LFWXUH7HVW ۳6RXQG7HVW ۳3URGXFW6HUYLFH,QIR ۳1HWZRUN7HVW &ORVH 1R Yes 'R\RXKDYHDSUREOHPLQWKLVWHVW VFUHHQ" " RED WATCHING TV / CHANNEL CONTROL WATCHING TV / CHANNEL CONTROL 74 Product/Service Info. Network Test ۳6RIWZDUH8SGDWH ۳3LFWXUH7HVW ۳6RXQG7HVW ۳3URGXFW6HUYLFH,QIR ᯡ1HWZRUN7HVW &ORVH This function shows support and product information. Customer Service Center can differ by country. Check the newtwork status. 1 MENU SelectCustomer Support. 2 ENTER SelectProduct/Service Info.. You can check the various product/Service infomation based on your model. 3 BACK Return to the previous menu. EXIT Return to TV viewing. 1 MENU SelectCustomer Support. 2 ENTER Select…

Text truncated - open the document above for the full version.

LG Electronics USA Date: Nov 2, 2010 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Jin-Mo Yang,Engineering Manager of ESTECH Co., Ltd. and hereafter referred to as ESTECH, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jin-Mo Yang,Engineering Manager of ESTECH Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ESTECH as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Mr. Jae Cheon Lee,General Manager LG Electronics USA. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

LG Electronics USA Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: BEJ60PZ750UA To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until (please enter the product announcement date here): 45days Internal Photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Mr Jae Cheon Lee,General Manager LG Electronics USA. 2010-11-2

1. FRONT 2. REAR 3. PORT 1 4. PORT 2

ͅͿ΅Ͷ΃ͿͲͽ͑΁͹΀΅΀ ͑͢͟;ΒΚΟ͑ͳΠΒΣΕ ͑͑͑͑͢͟͢ͷΣΠΟΥ ͑͑͑ͣ͑͢͟΃ΖΒΣ ͣ͑͟ʹ΅΃ͽ͑ͳΠΒΣΕ ͑͑͑ͣ͑͟͢ͷΣΠΟΥ ͑͑͑ͣͣ͑͟΃ΖΒΣ ͤ͑͟ͽͶ͵͑ͳΠΒΣΕ ͑ͤ͑͟͢ͷΣΠΟΥ ͑͑͑ͤͣ͑͟΃ΖΒΣ ͥ͑͟΁͵΁ ͥ͑͟͢ͷΣΠΟΥ ͥͣ͑͟΃ΖΒΣ ͦ͑͟΁΀ΈͶ΃͑ͳΠΒΣΕ ͦ͑͟͢ͷΣΠΟΥ ͦͣ͑͟΃ΖΒΣ ͧ͑͟΃ͷ͑;ΠΕΦΝΖ ͧ͑͟͢ͷΣΠΟΥ ͧͣ͑͟΃ΖΒΣ ͨ͑͟ ́Έ ͅ΅ʹ͹ ͨ͑͟͢ͷΣΠΟΥ ͨͣ͑͟΃ΖΒΣ ͩ͑͟Ήʹ͑ͳΠΒΣΕ ͩ͑͟͢ͷΣΠΟΥ ͩͣ͑͟΃ΖΒΣ ͪ͑͟Ήͽ͑ͳΠΒΣΕ ͪ͑͟͢ͷΣΠΟΥ ͪͣ͑͟΃ΖΒΣ ͑͢͟͡Ή΃͑ͳΠΒΣΕ ͑͢͟͢͡ͷΣΠΟΥ ͣ͑͢͟͡΃ΖΒΣ ͑͢͢͟Ί͵΃·ͳ΅͑ͳΠΒΣΕ ͑͢͢͟͢ͷΣΠΟΥ ͣ͑͢͢͟΃ΖΒΣ ͣ͑͢͟Ί͵΃·΅΁͑ͳΠΒΣΕ ͣ͑͢͟͢ͷΣΠΟΥ ͣͣ͑͢͟΃ΖΒΣ ͤ͑͢͟Ί ́Ά ́͑ͳΠΒΣΕ ͤ͑͢͟͢ͷΣΠΟΥ ͤͣ͑͢͟΃ΖΒΣ ͥ͑͢͟΋ ́Ά ́͑ͳΠΒΣΕ ͥ͑͢͟͢ͷΣΠΟΥ ͥͣ͑͢͟΃ΖΒΣ ͦ͢͟΋ ́Άͳ͑ͳΠΒΣΕ ͦ͑͢͟͢ͷΣΠΟΥ ͦͣ͑͢͟΃ΖΒΣ ͑

Test Report for FCC FCC ID:BEJ60PZ750UA Company name Address Telephone Product name Model name Serial number Test date Testing location Standard □ Class A ■ Class B Test resultOK □ Class A ■ Class B Test resultOK Tested by Reviewed by Abbreviation * Note - Basic model: 60PZ750-UA Additional model(s): 60PZ550-UA, 60PZ540-UB - Basic model have four HDMI ports , but 60PZ540-UB have three HDMI ports. - 60PZ550-UA is different front case from Basic model. - This test report is not permitted to copy partly without our permission - This test result is dependent on only equipment to be used - This test result based on a single evaluation of one sample of the above mentioned Engineer H.K.LEE 94696 LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs, NJ 07632 847-941-8373 PLASMA TV/MONITOR ESTECH. Co., Ltd. 97-1 Hoiuk-Ri Majang-Myon, Icheon-city, KyungKi-Do, Korea LG Electronics Inc. KOREA Report Number : ESTF151011-001 , Web : www. estech. co. kr Page 1 of 15 OK, Pass = Passed, Fail = Failed, N/A = not applicable ■ Radiated Emission 1-Nov-10 Engineering Manager J.M.Yang (Signature) (Signature) Test item ■ Conducted Emission Date of issue2-Nov-10 60PZ750-UA FCC PART 15 (2008) & ICES-003 , ANSI C 63.4 2003 Measurement facility registration number Report NumberESTF151011-001 Manufacturer Country of origin Applicant Product NONE EST-QP-20-01(0)-(F15) 3 4 5 6 8 8 8 9 10 11 11 11 12 13 15 Appendix 1. Spectral diagram 5.3 Test data ................................................................................................ ... 7. Photographs of test setup ................................................................................. 8. Photographs of EUT .......................................................................................... 6. Measurement of conducted emission .................................................................. 6.1 Measurement equipment .............................................................................. 6.2 Environmental conditions .............................................................................. 6.3 Test data ................................................................................................... Report Number : ESTF151011-001 , Web : www. estech. co. kr Page 2 of 15 5. Measurement of radiated emission ..................................................................... 5.1 Measurement equipment .............................................................................. Contents 1. Laboratory Information .................................................................................... 2. Descri ption of EUT .......................................................................................... 3. Test Standards ................................................................................................ 4. Measurement condition .................................................................................... 5.2 Environmental conditions .............................................................................. 5.4 Test data ................................................................................................... EST-QP-20-01(0)-(F15) 1. Laboratory Information 1.1 General 1.2 Test Lab. Corporation Name : ESTECH Co., Ltd. Head Office : Rm 1015, World Venture Center II, 426-5, Gasan-dong, Geumcheon-gu, Seoul, Korea (Safety & Telecom. Test Lab) EMC Test Lab : 97-1, Hoeok-ri, Majang-myun, Ichion-city, Kyonggi-do, South Korea 1.3 Official Qualification(s) KCC : Granted Accreditation from Ministry of Information & Communication for EMC, Safety and Telecommunication KOLAS : Accredited Lab By Korea Laboratory Accreditation Schema base on CENELEC requirements FCC : Filed Laboratory at Federal Communications Commission VCCI : Granted Accreditation from Voluntary Control Council for Interference from ITE This EUT (Equipment Under Test) has been shown to be capable of compliance with the applicable technical standards and is tested in accordance with the measurement procedures as indicated in this report.ESTECH Lab attests to accuracy of test data. All measurement reported herein were performed by ESTECH Co., Ltd. ESTECH Lab assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report Number : ESTF151011-001 , Web : www. estech. co. kr Page 3 of 15 EST-QP-20-01(0)-(F15) 2. Description of EUT 2.1 Summary of Equipment Under Test Product Name : Model Number : 60PZ750-UA Serial Number : Manufacturer : Country of origin : Rating : Receipt Date : X-tal list(s): 2.2 General descriptions of EUT Report Number : ESTF151011-001 , Web : www. estech. co. kr Page 4 of 15 PLASMA TV/MONITOR NONE LG Electronic Inc. KOREA AC (100 - 240) V , (50 - 60) Hz 22-Oct-10 4 MHz, 10 MHz, 25 MHz, 54 MHz EST-QP-20-01(0)-(F15) 3. Test Standards Test Standard : FCC PART 15 (2008) & ICES-003 Test Method : ANSI C 63.4 (2003) This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and AC power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain decides that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment These method apply to the measurement of individual units or systems comprised of multiple units TThis Standard sets out the regulations under which an intentional, unintentional, or incidental radiator may be operated without an individual license. It also contains the technical specifications, administrative requirements and other conditions relating to th…

Text truncated - open the document above for the full version.

TEST SETUP PHOTO 1. Conducted Emission setup photo 1.1. Front 1.2. Rear 2. Radiated Emission setup photo 2.1 Front 2.2. Rear