BEJCB575G15-inch CRT Monitor

P/NO : 3828TUL~(0202-REV00) Printed in Brizil Please read this manual carefully before operating your set.Retain it for future reference.Record model number and serial number of the set.See the label attached on the back cover and quote thisinformation to your dealer when you require service. http://www.lge.com Color Monitor 575N/575E User’s Guide StudioWorks A1 This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnect device. Ensure that the socket-outlet is easily accessible after installation. Operate the monitor only from a power source indicated in the specifications of this manual or listed on the monitor. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement. Do not Open the Monitor. There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the monitor is not operating properly. To Avoid Personal Injury : Do not place the monitor on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not try to roll a stand with small casters across thresholds or deep pile carpets. To Prevent Fire or Hazards: Always turn the monitor OFF if you leave the room for more than a short period of time. Never leave the monitor ON when leaving the house. Keep children from dropping or pushing objects into the monitor's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor. During a lightning storm or when the monitor is to be left unattended for an extended period of time, unplug it from the wall outlet. Do not bring magnetic devices such as magnets or motors near the picture tube. Important Precautions A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the monitor where the power cord is subject to damage. Do not use this monitor near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Monitors are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER: Block the bottom ventilation slots by placing the monitor on a bed, sofa, rug, etc. Place the monitor in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the monitor near or over a radiator or heat source. On Cleaning Unplug the monitor before cleaning the face of the monitor screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the monitor screen because overspray may cause electrical shock. On Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. A3A3 Connecting the Monitor Latch Before setting up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices. Carefully set the monitor face-down with the underside facing you. Connecting the Tilt/Swivel stand 1.Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 2. Insert the hooks into slots. 3. Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position. NOTE This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Hook Slot Hook A4 Connecting the Monitor Using the Computer 1.Connect the signal cable. When mated, tighten the thumbscrews to secure the connection. 2.Connect the power cord into a properly power outlet that is easily accessible and close to the monitor. Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Wall-outlet type * NOTE This is a simplified representation of the rear view. This rear view represents a general model; your monitor may differ from the view as shown. PC-outlet type* PC MAC Power Cord Signal Cable Attached Type * Detached Type * * Varies according to model. A5 Control Panel Functions Front Panel Controls Buttons Use these buttons to choose or adjust items in the on screen display. MENU (or OSD) Button Use this button to enter or exit the on screen display. This Indicator lights up green when the monitor operates normally. If the monitor is in DPM (Energy Saving) mode, this indicator color changes to amber. Power (DPMS) Indicator Use this button to turn the monitor on or off. Power Button Use this button to enter a selection in the on screen display. SELECT (or SET) Button The Contrast and Brightness functions are also available in the On Screen Display (OSD) menu. ControlDirect Access Function ControlFunction Button Button Bring up Contrast adjustment Bring up Brightness adjustment A6 On Screen Display (OSD) Control Adjustment Screen Adjustment Maki…

Text truncated - open the document above for the full version.

@ LG Electronics Inc.& January 10, 2002 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. To whom it may concern: We, the undersigned, hereby authorize PCTEST Engineering Laboratory, Inc., to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by PCTEST Engineering Laboratory, Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to the application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, General Manager of New York Office LG Electronics Inc.

March 11, 2002 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: LG ELECTRONICS INC. FCC ID: BEJCB575G Gentlemen: Transmitted herewith, on behalf of LG Electronics Inc. is an application for certification of the following 15–inch CRT Monitor: FCC ID: BEJCB575G MODEL: CB575G TRADE NAMES: LG  EUT TYPE: 15-inch CRT Monitor Attached are the applicant’s authorization letter, measurement report (test data and test plots), FCC ID label and location, test setup photographs, internal and external photographs, block diagram, and the user's manual. Should you have any questions or comments concerning the above, please contact the undersigned. cc: Mr. Yeong Hur, EMC Engineer LG Electronics Inc.

© 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G

© 2002 PCTEST Lab FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §§ 2.925 & 15.19 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. (SEE NEXT PAGE)

© 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G

© 2002 PCTEST Engineering Lab., Inc. PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road • Columbia, MD 21045 • U.S.A. TEL (410) 290-6652 • FAX (410) 290-6654 http://www.pctestlab.com CERTIFICATE OF COMPLIANCE LG Electronics Inc. — DID DIVISION Dates of Tests: March 20-21, 2002 642, Jinpyung-dong, Kumi-city, Test Report S/N: B.220304099.BEJ Kyoungsangbuk-do, 730-360 KOREA Test Site: PCTEST Lab., MD U.S.A. Attn: Mr. Yeong Hur, EMC Engineer FCC ID BEJCB575G APPLICANT LG ELECTRONICS INC. Rule Part(s): FCC Part 15 Subpart B Equipment Class: Class B Peripheral Device (JBP) Standard(s): EN55022: 1998 (CISPR 22) EUT Type: 15-inch CRT Monitor Max. Resolution(s): 1280 x 1024 Non-interlaced @ 60Hz Trade Name(s): LG ® Model(s): CB575G This equipment has been shown to be in compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-1992. (Grant Note: #19) I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Lab Code 100431-0 © 2002 PCTEST Engineering Laboratory, Inc. FCC Class B TABLE OF CONTENTS ATTACHMENT A: COVER LETTER(S) ATTACHMENT B: ATTESTATION STATEMENT(S) ATTACHMENT C: TEST REPORT 1.1 SCOPE 1 2.1 INTRODUCTION (SITE DESCRIPTION) 2 3.1 PRODUCTION INFORMATION 3 4.1 DESCRIPTION OF TESTS (CONDUCTED) 4 4.3 DESCRIPTION OF TESTS (RADIATED) 5 5.1 LIST OF SUPPORT EQUIPMENT 6 6.1 TEST DATA (CONDUCTED) 7 7.1 TEST DATA (RADIATED) 8 8.1 SAMPLE CALCULATIONS 9 9.1 ACCURACY OF MEASUREMENT 10 10.1 LIST OF TEST EQUIPMENT 11 11.1 TEST SOFTWARE USED 12 12.1 CONCLUSION 13 ATTACHMENT D: TEST PLOTS ATTACHMENT E: FCC ID LABEL & LOCATION ATTACHMENT F: BLOCK DIAGRAM(S) ATTACHMENT G: TEST SETUP PHOTOGRAPHS ATTACHMENT H: EXTERNAL PHOTOGRAPHS ATTACHMENT I: INTERNAL PHOTOGRAPHS ATTACHMENT J: USER’S MANUAL Test Report S/N: B.220304099.BEJ FCC Class B Dates of Tests: March 20-21, 2002 Certification © 2002 PCTEST Lab 15-inch CRT Monitor 1 LG Electronics Inc. FCC ID: BEJCB575G MEASUREMENT REPORT 1.1 Scope Measurement and determination of electromagnetic emissions (EME) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission. Applicant Name: LG ELECTRONICS INC. Address: 642, Jinpyung-dong, Kumi-city, Kyoungsangbuk-do, 730-360 KOREA Contact Person: Yeong Hur , EMC Engineer Product Engineering Dept., Safety & EMC Team • FCC ID: BEJCB575G • Equipment Class: B Digital Device / Peripheral (JBP) • EUT Type: 15-inch CRT Monitor • Trade Name(s): LG ® • Model(s): CB575G • Max. Resolution: 1280 x 1024 Non-interlaced @ 60Hz • Frequency Range: H-Sync: 31kHz — 70kHz V-Sync: 50Hz — 160Hz • Cable(s): Shielded D-Sub (with ferrite on EUT end) • Power Cord: Unshielded • Rule Part(s): FCC Part 15 Subpart B • Test Procedure(s): ANSI C63.4 (1992) • Dates of Tests: March 20-21, 2002 • Place of Tests: PCTEST Lab, Columbia, MD U.S.A. • Test Report S/N: B.220304099.BEJ Test Report S/N: B.220304099.BEJ FCC Class B Dates of Tests: March 20-21, 2002 Certification © 2002 PCTEST Lab 15-inch CRT Monitor 2 LG Electronics Inc. FCC ID: BEJCB575G 2.1 INTRODUCTION The measurement procedure described in American National Standard for Methods of Measurement of Radio- Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz (ANSI C63.4-1992) was used in determining radiated and conducted emissions emanating from LG Electronics Inc. 15-inch CRT Monitor FCC ID: BEJCB575G. These measurement tests were conducted at PCTEST Engineering Laboratory, Inc. facility in New Concept Business Park, Guilford Industrial Park, Columbia, Maryland. The site address is 6660-B Dobbin Road, Columbia, MD 21045. The test site is one of the highest points in the Columbia area with an elevation of 390 feet above mean sea level. The site coordinates are 39° 11'15" N latitude and 76° 49'38" W longitude. The facility is 1.5 miles North of the FCC laboratory, and the ambient signal and ambient signal strength are approximately equal to those of the FCC laboratory. There are no FM or TV transmitters within 15 miles of the site. The detailed description of the measurement facility was found to be in compliance with the requirements of § 2.948 according to ANSI C63.4 on October 19, 1992. 2.2 PCTEST Location The map at right shows the location of the PCTEST Lab, its proximity to the FCC Lab, the Columbia vicinity area, the Baltimore-Washington International (BWI) airport, and the city of Baltimore, and the Washington, D.C. area. (see Figure 1). Figure 1. Map of the Greater Baltimore and Metropolitan Washington, D.C. area. Test Report S/N: B.220304099.BEJ FCC Class B Dates of Tests: March 20-21, 2002 Certification © 2002 PCTEST Lab 15-inch CRT Monitor 3 LG Electronics Inc. FCC ID: BEJCB575G 3.1 Product Information 3.2 Equipment Description The Equipment Under Test (EUT) is the LG Electronics Inc. (LG Model: CB575G) 15-inch CRT Monitor FCC ID:BEJCB575G. Maximum Resolution(s): 1280 x 1024 Non-interlaced @60Hz Frequency Range(s): H-Sync: 31kHz — 70kHz V-Sync: 50Hz — 160 Hz Pixel Pitch: 0.28 mm Power Supply: AC 100-240V 50/ 60Hz 1.5A Power Cord: Unshielded AC power cord Port(s)/Input Connector(s): 15-pin D-Sub type VGA signal connector Cable(s): Shielded D-Sub (with ferrite on EUT end) Dimensions (WxHxD): 36.0 x 38.95 x 39.15 cm Weight (Net): 12.7 kg Suppression Devices: No modifications were made to the device. Test Report S/N: B.220304099.BEJ FCC Class B Dates of Tests: March 20-21, 2002 Certification © 2002 PCTES…

Text truncated - open the document above for the full version.

© 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G © 2002 PCTEST Lab 15-inch CRT Monitor NVLAP Lab Code: 100431-0 LG Electronics Inc. FCC ID: BEJCB575G