BEJDT-LG29V95Personal Computer

2 Tips / Important Safety Precautions Tips / Important Safety Precautions Using the PCLG Easy Guide, LG Troubleshooting LG Easy Guide(User's Guide) andLG Troubleshooting(Troubleshooting Guide) are provided to users for easy and convenient use of the product. LG Easy GuideandLG Troubleshootingcan be used on the Start screen and the Desktop. Running in the Start Screen On the Start screen, press[LG Easy Guide]or[LG Troubleshooting]tile to run it. •LG Easy GuideandLG Troubleshootingon the Start screen can be used only in the online environment. •If the product is not connected to the Internet, use[LG Easy Guide]and[LG Troubleshooting]installed on the Desktop. ENGLISH Tips / Important Safety Precautions 3 Running on the Desktop PC 1On the Start screen or Desktop, click [] icon to run[LG Easy Starter]. TIP LG Easy Startermay be installed throughLG Update Center. 2From[LG Software]menu, run[LG Easy Guide]or[LG Troubleshooting]. •IfLG Easy Starteris not installed, refer to[Run, Stand by and Exit Windows Store App]and then run[LG Easy Guide]or[LG Troubleshooting]. ENGLISH 4 Tips / Important Safety Precautions Information/Precautions Before Using Before readingLG Easy Guide, first check the following information. •Representative images are used inLG Easy Guide. Product purchase may differ in appearance and color. •LG Easy Guideincludes instruction about optional products. There may be information about products you did not purchase. •LG Easy Guidehas been written for the Windows 8.1 operating system. •The contents ofLG Easy Guideare subject to change without prior notice. •Use, duplication, or reproduction of any part ofLG Easy Guidewithout prior permission from LG Electronics Inc. is strictly prohibited. •LG Electronics Inc. does not provide warranty for data loss. In order to minimize damage from data loss, please make backup copies of important data. •The optical disk drive (DVD, CD-ROM, etc.) is optional and may not be provided with the product. •Manufacturers and installers cannot provide services related to human safety as this wireless device may cause radio interference. Safety Precaution Notations The below symbols are to inform you of dangers and safety concerns that you must be aware of. Read the symbol-indicated instructions with caution to avoid any possible mishap. WARNING Appears in the case of noncompliance with the instruction that may cause serious physical damage or fatal injuries. CAUTION Appears in the case of noncompliance with the instruction that may cause minor damage to the body or the machine. Text Notations The below symbols are used to display information required to use the product. Familiarize yourself with the instructions marked by the symbols to ensure proper operation of the product. TIP Indicates that the following information is added to help the user utilize the machine more conveniently. ENGLISH Tips / Important Safety Precautions 5 The Option symbol indicates that the concerned device is not included in the product package and thus has to be purchased separately, or the device may not be applied to the user's machine depending on model type. Manufacturer and Copyright Microsoft™,MS™, WinPE™, and Windows ® are the registered trademarks of Microsoft Corporation™. IBM™, IBM Personal Computer™, PS/2™, and PC AT™are the registered trademarks of International Business Machines Corporation™. The SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc. LG™logo is a registered trademark of LG™Corporation. SONY™logo and Memory Stick™are the registered trademarks of SONY™Corporation. Transcend™logo is a registered trademark of Transcend™Corporation. SD™logo is a registered trademark of Secure Digital™Corporation. xD™logo is a registered trademark of FUJIFILM™Co., ltd. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Sound is a trademark of DTS, Inc.ⓒDTS, Inc. All Rights Reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Studio Sound is a trademark of DTS, Inc.ⓒDTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double- D symbol are trademarks of Dolby Laboratories. MaxxAudio and additional MAXX trademarks are trademarks and/or registered trademarks of Waves Audio Ltd. LG Easy Guidemay contain undetectable errors despite our dedicated efforts to provide users with reliable information. We ask for your understanding. The illustrated figures inLG Easy Guidemay differ in appearance with the actual products. ENGLISH 6 Tips / Important Safety Precautions Unauthorized reproduction or duplication of any part ofLG Easy Guideis strictly prohibited. LG Electronics Inc. reserves the right to modify any part of this manual for quality purposes, without prior notice. Copyright (C) 2014 LG Electronics Inc. Digitalmate Co., LTD Country of OriginR.O. Korea ManufacturerLG Electronics Inc. OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [email protected]. This offer is valid for three (3) years from the date on which you purchased the product. System Protection Feature If the system becomes too hot, the s…

Text truncated - open the document above for the full version.

LG Electronics USA, Inc. 1000 Sylvan Avenue, Englewood Cliffs, New Jersey 07632 Date: Jul 08, 2015 Letter of Authorization We, LG Electronics USA Inc. hereby declares that test report regarding to model 7260NGW, 3160NGW manufactured by Intel Corporation has been permitted to be used when we proceed to approval for host device by request of us. When it was requested, Intel Corporation has authorized us to use test report of above 2 models. Sincerely, Jongchul Lee Director, NA Regulatory & Environmental Affairs. LG Electronics USA, Inc.

LG Electronics USA, Inc. 1000 Sylvan Avenue, Englewood Cliffs, New Jersey 07632 Date: June 26, 2015 Letter of Authorization We, the undersigned, hereby authorize Harvey Sung of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCCID: BEJDT-LG29V95 including signing of all doc uments relating to these matters. Any and all acts carried out by Harvey Sung of DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from LG Electronics USA, Inc. . “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Jongchul Lee Director, NA Regulatory & Environmental Affairs. LG Electronics USA, Inc.

DT&C Co., Ltd. 42, Yurim-ro, 154beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 449-935 Date: June 26, 2015 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards;

LG Electronics USA, Inc. 1000 Sylvan Avenue, Englewood Cliffs, New Jersey 07632 Date: June 26, 2015 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA RE: Request of Confidentiality for FCCID: BEJDT-LG29V95 T o Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Electronics USA, Inc. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This p rovision will give LG Electronics USA, Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part List and Tuned-up Procedure 4 Operation Description SHORT-TERM 5 Internal Photos 6 External Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Jongchul Lee Director, NA Regulatory & Environmental Affairs. LG Electronics USA, Inc

FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 1 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 2 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 3

FCC ID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label.

FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 1 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 2 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 3 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 4 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 5 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 6 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 7 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 8 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 9 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 10 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 11 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 12 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 13 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 14 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 15 FCCID: BEJDT-LG29V95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 16

~ ▪ ▪S=- = = ▪ mW/cm² (FCC Part 1.1310 Table 1 Limits for maximum permissible exposure(MPE) Note Maximum EIRP : 17.68 dBm( The MPE calculation for this exposure is shown below. 58.614 )mW The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. (802.11b) (802.11b) Maximum antenna gain(PK) : 2.18 dBi Max Target power : Measured Conducted power : 15.50 14.87 - FCC ID: BEJDT-LG29V95LG Electronics Inc. 2412.00 MHz2462.00 MHz Frequency range : MPE Calculation : WLAN(2.4GHz) dBm dBm Requirment =1 Calculation of power density at the specific separation EIRP / ( 4 R 2 π ) 58.614 / ( 4 X 20 2 X π )S = Maximum power density(mW/cm 2 ) Conclusion : The exposure condition of this device is compliant with FCC rules. 0.01166 mW/cm 2 EIRP = Equivalent Isotropic Radiated Power(mW) R = Distance to the center of the radiation of the antenna(20cm) ~ ▪ ▪S=- = = ▪ mW/cm² (FCC Part 1.1310 Table 1 Limits for maximum permissible exposure(MPE) Conclusion : The exposure condition of this device is compliant with FCC rules. 0.01530 mW/cm 2 EIRP = Equivalent Isotropic Radiated Power(mW) R = Distance to the center of the radiation of the antenna(20cm) Requirment =1 The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. The MPE calculation for this exposure is shown below. Calculation of power density at the specific separation EIRP / ( 4 R 2 π ) Note 76.913 / ( 4 X 20 2 X π )S = Maximum power density(mW/cm 2 ) Maximum antenna gain(PK) : 2.36 dBi Maximum EIRP : 18.86 dBm( 76.913 )mW Max Target power : 16.50 dBm (802.11n HT20) Measured Conducted power : 15.62 dBm (802.11n HT20) - FCC ID: BEJDT-LG29V95LG Electronics Inc. MPE Calculation : WLAN(5GHz) Frequency range : 5745.00 MHz5825.00 MHz ~ ▪ ▪S=- = = ▪ mW/cm² (FCC Part 1.1310 Table 1 Limits for maximum permissible exposure(MPE) Conclusion : The exposure condition of this device is compliant with FCC rules. 0.00067 mW/cm 2 EIRP = Equivalent Isotropic Radiated Power(mW) R = Distance to the center of the radiation of the antenna(20cm) Requirment =1 The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. The MPE calculation for this exposure is shown below. Calculation of power density at the specific separation EIRP / ( 4 R 2 π ) Note 3.373 / ( 4 X 20 2 X π )S = Maximum power density(mW/cm 2 ) Maximum antenna gain(PK) : -0.22 dBi Maximum EIRP : 5.28 dBm( 3.373 )mW Max Target power : 5.50 dBm (1Mbps) Measured Conducted power : 4.77 dBm (1Mbps) - FCC ID: BEJDT-LG29V95LG Electronics Inc. MPE Calculation : BT(2.4GHz) Frequency range : 2402.00 MHz2480.00 MHz ▪ ▪ ▪ MPE ratio (Power Density/Requirement) 0.012 1.0001.000 Configuration 1 (MPE ratio) 0.0150.001 Σ of MPE ratios RF function Band Power Density (mW/cm2) Requirement (mW/cm2) Configuration 3 (MPE ratio) 0.001Configuration 2 (MPE ratio) Note: The maximum power density in each RF function was used for above table. Conclusion : The exposure condition of this device is compliant with FCC rules. 0.015 0.0120.001 1.000 RF Exposure Compliance for simultaneous operations Configurations for simultaneous operations - Configuration 1: - Configuration 2: - Configuration 3: WLAN 2.4GHz 802.11b/g/n + Bluetooth 2.4GHz N/A Note: Above configuration was declared from applicant. 2.4GHz5GHz 0.011660.01530 Configurations for simultaneous operations WLANBT Requirment =Σ of MPE ratios ≤ 1 - FCCID: BEJDT-LG29V95LG Electronics Inc. 2.4GHzN/A 0.016 0.013 N/AN/A WLAN 5GHz 802.11a/n/ac + Bluetooth 2.4GHz 0.00067 N/A

DTNC1506-2942 FCC ID: BEJDT-LG29V95 Report No.: DRTFCC1506-0147 TRF-RF-234(00)150615 Page 2 / 62 Copyright ○ C 2015, DT&C Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1506-0147 Jun. 30, 2015 Initial issue DTNC1506-2942 FCC ID: BEJDT-LG29V95 Report No.: DRTFCC1506-0147 TRF-RF-234(00)150615 Page 3 / 62 Copyright ○ C 2015, DT&C Co., Ltd. CONTENTS 1. EUT DESCRIPTION ................................................................... 4 2. Information about test items .................................................... 5 2.1 Test mode / Channel Information ............................................ 5 2.2 Tested Channel Information .................................................... 6 2.3 Auxiliary equipment ................................................................ 6 2.4 Tested environment ................................................................ 6 2.5 EMI Suppression Device(s) / Modifications ............................ 6 3. SUMMARY OF TESTS ............................................................... 7 4. TEST METHODOLOGY ............................................................. 8 4.1 EUT configuration .................................................................. 8 4.2 EUT exercise .......................................................................... 8 4.3 General test procedures ......................................................... 8 4.4 Description of test modes ....................................................... 8 5. INSTRUMENT CALIBRATION ................................................... 9 6. FACILITIES AND ACCREDITATIONS ........................................ 9 6.1 Facilities ................................................................................. 9 6.2 Equipment .............................................................................. 9 7. ANTENNA REQUIREMENTS ..................................................... 9 8. TEST RESULT ......................................................................... 10 8.1 Emission Bandwidth (26 dB Bandwidth) .............................. 10 8.2 Minimum Emission Bandwidth (6 dB Bandwidth) ................ 13 8.3 Maximum Conducted Output Power.................................... 22 8.4 Maximum Power Spectral Density ...................................... 29 8.5 Frequency Stability ............................................................. 40 8.6 AC Conducted Emissions .................................................... 48 9. LIST OF TEST EQUIPMENT .................................................... 57 APPENDIX I ................................................................................. 58 APPENDIX II ................................................................................ 58 DTNC1506-2942 FCC ID: BEJDT-LG29V95 Report No.: DRTFCC1506-0147 TRF-RF-234(00)150615 Page 4 / 62 Copyright ○ C 2015, DT&C Co., Ltd. 1. EUT DESCRIPTION FCC Equipment Class Unlicensed National Information Infrastructure (UNII) Product Personal Computer Model Name LG29V95 Add Model Name N/A Hardware version 1.0 Software version 1.0 Power Supply AC 120 V Frequency Range U-NII 1(5150 ~ 5250 MHz) ▪ 802.11a/n(HT20): 5180 ~ 5240 MHz ▪ 802.11n(HT40): 5190 ~ 5230 MHz ▪ 802.11ac(VHT80): 5210 MHz U-NII 2A(5250 ~ 5350 MHz) ▪ 802.11a/n(HT20): 5260 ~ 5320 MHz ▪ 802.11n(HT40): 5270 ~ 5310 MHz ▪ 802.11ac(VHT80): 5290 MHz U-NII 2C(5470 ~ 5725 MHz) ▪ 802.11a/n(HT20): 5500 ~ 5700 MHz ▪ 802.11n(HT40): 5510 ~ 5670 MHz ▪ 802.11ac(VHT80): 5530 MHz U-NII 3(5725 ~ 5850MHz) ▪ 802.11a/n(HT20): 5745 ~ 5825 MHz ▪ 802.11n(HT40): 5755 ~ 5795 MHz ▪ 802.11ac(VHT80): 5775 MHz U-NII 2C & U-NII 3 ▪ 802.11ac(VHT20): 5720 MHz ▪ 802.11ac(VHT40): 5710 MHz ▪ 802.11ac(VHT80): 5690 MHz Modulation type OFDM Antenna Specification Antenna type: Internal Antenna Antenna gain ▪ U-NII 1 band: 1.24 dBi ▪ U-NII 2A band: 1.24 dBi ▪ U-NII 2C band: 2.48 dBi ▪ U-NII 3 band: 2.36 dBi Note: This device does not used TDWR band. DTNC1506-2942 FCC ID: BEJDT-LG29V95 Report No.: DRTFCC1506-0147 TRF-RF-234(00)150615 Page 5 / 62 Copyright ○ C 2015, DT&C Co., Ltd. 2. Information about test items 2.1 Test mode / Channel Information 5GHz Band Mode Data Rate U-NII 1 802.11a 6Mbps 802.11n(HT20) MCS 0 802.11n(HT40) MCS 0 802.11ac(VHT80) NSS1 MCS 0 U-NII 2A 802.11a 6Mbps 802.11n(HT20) MCS 0 802.11n(HT40) MCS 0 802.11ac(VHT80) NSS1 MCS 0 U-NII 2C 802.11a 6Mbps 802.11n(HT20) MCS 0 802.11n(HT40) MCS 0 802.11ac(VHT20) NSS1 MCS 0 802.11ac(VHT40) NSS1 MCS 0 802.11ac(VHT80) NSS1 MCS 0 U-NII 3 802.11a 6Mbps 802.11n(HT20) MCS 0 802.11n(HT40) MCS 0 802.11ac(VHT20) NSS1 MCS 0 802.11ac(VHT40) NSS1 MCS 0 802.11ac(VHT80) NSS1 MCS 0 Note 1: The worst case data rate is determined as above test mode according to the power measurements. And all test items were performed at the worst case data rate. DTNC1506-2942 FCC ID: BEJDT-LG29V95 Report No.: DRTFCC1506-0147 TRF-RF-234(00)150615 Page 6 / 62 Copyright ○ C 2015, DT&C Co., Ltd. 2.2 Tested Channel Information 5GHz Band 802.11a/n(HT20) 802.11n(HT40) 802.11ac(VHT80) Channel Frequency [MHz] Channel Frequency [MHz] Channel Frequency [MHz] U-NII 1 36 5180 38 5190 - - 40 5200 - - 42 5210 48 5240 46 5230 - - U-NII 2A 52 5260 54 5270 - - 60 5300 - - 58 5290 64 5320 62 5310 - - U-NII 2C 100 5500 102 5510 - - 116 5580 110 5550 106 5530 140 5700 134 5670 - - U-NII 3 149 5745 151 5755 - - 157 5785 - - 155 5775 165 5825 159 5795 - - 5GHz Band 802.11ac(VHT20) 802.11ac(VHT40) 802.11ac(VHT80) Channel Frequency [MHz] Channel Frequency [MHz] Channel Frequency [MHz] U-NII 2C / U-NII 3 144 5720 142 5710 138 5690 2.3 Auxiliary equipment Equipment Model No. Serial No. Manufacturer Note - - - - - 2.4 Tested environment Temperature : 23 o C Relative humidity content : 41 % ~ 46 % R.H. Details of power supply : AC 120 V 2.5 EMI Suppression Device(s) / Modifications EMI suppression device(s) added and/or modifications made during testing → None DTNC1506-2942 FCC ID: BEJDT-LG29V95 Report No.: DRTFCC1506-0147 TRF-RF-234(00)150615 Page 7 / 62 …

Text truncated - open the document above for the full version.

FCC ID: BEJDT-LG29V95 DTNC1506-02942 Report No.: DRTFCC1506-0148 TRF-RF-228(00)1401006 Page 2 / 15 Copyright ○ C 2015, DT&C Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1506-0148 Jun. 30, 2015 Initial issue FCC ID: BEJDT-LG29V95 DTNC1506-02942 Report No.: DRTFCC1506-0148 TRF-RF-228(00)1401006 Page 3 / 15 Copyright ○ C 2015, DT&C Co., Ltd. Table of Contents 1. EUT DESCRIPTION ................................................................... 4 1.1. Auxiliary equipment ............................................................... 5 2. DYNAMIC FREQUENCY SELECTION TEST DESCRIPTION ... 6 2.1. Applicability of DFS requirements prior to use of a channel ... 6 2.2. Applicability of DFS requirements during normal operation ... 6 2.3. Requirements of client devices .............................................. 7 2.4. DFS response requirement values ........................................ 7 2.5. DFS detection thresholds ...................................................... 8 2.6. Radar test waveforms ........................................................... 9 3. Test procedure ........................................................................ 10 3.1. Setup for Client with injection at the Master ......................... 10 3.2. Spectrum analyzer setting parameter .................................. 10 3.3. Conducted test procedure ................................................... 10 4. SUMMARY OF TESTS ..............................................................11 5. LIST OF EQUIPMENTS ........................................................... 12 6. TEST RESULTS ....................................................................... 13 6.1. Move time and aggregate time ............................................ 13 6.1.1. U-NII-2A : 802.11ac(HT80), 5290 MHz ............................................. 13 6.1.2. U-NII-2C : 802.11ac(HT80), 5530 MHz............................................. 13 6.2. Non-occupancy period ........................................................ 14 6.2.1. U-NII-2A : 802.11ac(HT80), 5290MHz .............................................. 14 6.2.2. U-NII-2C : 802.11ac(HT80), 5530MHz ............................................. 14 6.3. Radar test waveforms injection level ................................... 15 6.3.1. U-NII-2A : 5290MHz ......................................................................... 15 6.3.2. U-NII-2C : 5530MHz ......................................................................... 15 FCC ID: BEJDT-LG29V95 DTNC1506-02942 Report No.: DRTFCC1506-0148 TRF-RF-228(00)1401006 Page 4 / 15 Copyright ○ C 2015, DT&C Co., Ltd. 1. EUT DESCRIPTION FCC equipment class Unlicensed National Information Infrastructure (UNII) Product Personal Computer Model name LG29V95 Add model name N/A Hardware version 1.0 Software version 1.0 EUT capabilities DFS Power supply AC 120 V Test condition Conducted Radiated Channel bandwidth 802.11a/n/ac: 20 MHz 802.11n/ac: 40 MHz 802.11ac: 80 MHz Frequency Range U-NII 2A(5250 ~ 5350 MHz) ▪ 802.11a/n(HT20): 5260 ~ 5320 MHz ▪ 802.11n(HT40): 5270 ~ 5310 MHz ▪ 802.11ac(VHT80): 5290 MHz U-NII 2C(5470 ~ 5725 MHz) ▪ 802.11a/n(HT20): 5500 ~ 5700 MHz ▪ 802.11n(HT40): 5510 ~ 5670 MHz ▪ 802.11ac(VHT80): 5530 MHz ▪ 802.11ac(VHT20): 5720 MHz ▪ 802.11ac(VHT40): 5710 MHz Modulation type OFDM Operational mode Master mode Client mode without radar detection Client mode with radar detection Antenna specification Antenna type: Internal Antenna Antenna gain U-NII-2A 1.24 dBi U-NII-2C 2.48 dBi Note1: The above EUT information was declared by the manufacturer. Note2: Refer to UNII report FCC ID: BEJDT-LG29V95 DTNC1506-02942 Report No.: DRTFCC1506-0148 TRF-RF-228(00)1401006 Page 5 / 15 Copyright ○ C 2015, DT&C Co., Ltd. 1.1. Auxiliary equipment Equipment Model No. Serial No. Manufacturer Note Access Point (Master) DIR-868L R3X81E6000093 D-Link FCCID: RRK2012060056-1 - - - - - FCC ID: BEJDT-LG29V95 DTNC1506-02942 Report No.: DRTFCC1506-0148 TRF-RF-228(00)1401006 Page 6 / 15 Copyright ○ C 2015, DT&C Co., Ltd. 2. DYNAMIC FREQUENCY SELECTION TEST DESCRIPTION 2.1. Applicability of DFS requirements prior to use of a channel Requirement Operational mode Master Client without radar detection Client with radar detection Non-Occupancy Period Yes Not required Yes DFS Detection Threshold Yes Not required Yes Channel Availability Check time Yes Not required Not required U-NII Detection Bandwidth Yes Not required Yes 2.2. Applicability of DFS requirements during normal operation Requirement Operational mode Master or client with radar detection Client without radar detection DFS Detection Threshold Yes Not required Channel Closing Transmission Time Yes Yes Channel Move time Yes Yes U-NII Detection Bandwidth Yes Not required Additional requirements for devices with multiple bandwidth modes Operational mode Master or client with radar detection Client without radar detection U-NII Detection Bandwidth and Statistical Performance Check All BW modes must be tested Not required Channel Move Time and Channel Closing Transmission Time Test using widest BW mode available Test using the widest BW mode available for the link All other tests Any single BW mode Not required Note: Frequencies selected for statistical performance check (Section 7.8.4) should include several frequencies within the radar detection bandwidth and frequencies near the edge of the radar detection bandwidth. For 802.11 devices it is suggested to select frequencies in each of the bonded 20 MHz channels and the channel center frequency. The EUT was tested according to the following specification: 905462 D02 UNII DFS Compliance Procedure New Rules v01r01 FCC ID: BEJDT-LG29V95 DTNC1506-02942 Report No.: DRTFCC1506-0148 TRF-RF-228(00)1401006 Page 7 / 15 Copyright ○ C 2015, DT&C Co., Ltd. 2.3. Requirements of client devices a) A Client Device will not transmit before having received appropriate control signals from a Master Device. b) A Client Device will stop all it…

Text truncated - open the document above for the full version.

File: R92627 Page 1 of 22 TEST REPORT Covering the DYNAMIC FREQUENCY SELECTION (DFS) REQUIREMENTS OF FCC Part 15 Subpart E (UNII), RSS-210 Annex 9 Intel Mobile Communications Model(s): 3160NGW Wireless Network Adapter IC CERTIFICATION #: 1000M-3160NG FCC ID: PD93160NG and PD93160NGU COMPANY: Intel Mobile Communications 100 Center Point Circle, Suite 200 Columbia, SC, 29210 TEST SITE: National Technical Systems - Silicon Valley 41039 Boyce Road Fremont, CA 94538 REPORT DATE: June 17, 2013 FINAL TEST DATE: June 10, 2013 TEST ENGINEER: Mark Hill/Fred Leffingwell PROGRAM MGR / QUALITY ASSURANCE DELEGATE / TECHNICAL REVIEWER: FINAL REPORT PREPARER: ______________________________ ______________________________ David W. Bare David Guidotti Chief Engineer Senior Technical Writer National Technical Systems - Silicon Valley is accredited by the A2LA, certificate number 0214.26, to perform the test(s) listed in this report, except where noted otherwise. This report and the information contained herein represent the results of testing test articles identified and selected by the client performed to specifications and/or procedures selected by the client. National Technical Systems (NTS) makes no representations, expressed or implied, that such testing is adequate (or inadequate) to demonstrate efficiency, performance, reliability, or any other characteristic of the articles being tested, or similar products. This report should not be relied upon as an endorsement or certification by NTS of the equipment tested, nor does it represent any statement whatsoever as to its merchantability or fitness of the test article, or similar products, for a particular purpose. This report shall not be reproduced except in full NTS Silicon Valley -- EMC Department Test Report Report Date: June 17, 2013 REVISION HIST…

Text truncated - open the document above for the full version.