BEJE2370VVLED LCD Monitor

Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 1 / 1 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV APPENDIX G : USER’S MANUAL OWNER’S MANUAL LED LCD MONITOR LED LCD MONITOR MODELS E2370V E2770V www.lg.com Please read this manual carefully before operating your set and retain it for future reference. ENGLISH 1 Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. The appliance coupler is used as the disconnect device. Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not Open the Display: There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly. To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen. It can cause injury to human, problem to product and damage the display. To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock. 2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER: Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel. Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen. Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair. Avoid high temperatures and humidity. Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol) Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining. On Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal (Only , Hg lamp used LCD Monitor) The fluorescent lamp used in this product contains a sma…

Text truncated - open the document above for the full version.

Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 1 / 1 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV APPENDIX G : USER’S MANUAL OWNER’S MANUAL LED LCD MONITOR LED LCD MONITOR MODELS E2370V E2770V www.lg.com Please read this manual carefully before operating your set and retain it for future reference. ENGLISH 1 Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. The appliance coupler is used as the disconnect device. Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not Open the Display: There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly. To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen. It can cause injury to human, problem to product and damage the display. To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock. 2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER: Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel. Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen. Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair. Avoid high temperatures and humidity. Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol) Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining. On Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal (Only , Hg lamp used LCD Monitor) The fluorescent lamp used in this product contains a sma…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 November 5, 2010 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, LG Electronics Inc., hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product Name: LED LCD Monitor FCC ID: BEJE2370VV We affirm that between SIEMIC and LG Electronics Inc., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Jae Cheon Lee, General Manager LG Electronics USA LG Electronics USA 1000 Sylvan Avenue, En glewood Cliffs, NJ 07632, USA

Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 SCS-F19: Confidentiality Request Letter Rev 1.0 Nov 14, 2006 Federal Communications Commission Authorization and Evaluation Division November 5, 2010 Confidentiality Request regarding application for certification of FCC ID: BEJE2370VV We hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name BLOCK DIAGRAM CONF(L)_E2370VV_BlkDia.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In addition to above mentioned documents, pursuant to Public DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following Exhibit Type File Name TEST SET UP PHOTOGRAPHS CONF(S)_ E2370VV_Tsup.pdf EXTERNAL PHOTOGRAPHS CONF(S)_ E2370VV_ExtPho.pdf INTERNAL PHOTOGRAPHS CONF(S)_ E2370VV_IntPho.pdf USER’S MANUAL CONF(S)_ E2370VV_UseMan.pdf The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Jae Cheon Lee, General Manager LG Electronics USA LG Electronics USA 1000 Sylvan Avenue, En glewood Cliffs, NJ 07632, USA

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 November 5, 2010 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, LG Electronics Inc., hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product Name: LED LCD Monitor FCC ID: BEJE2370VV We affirm that between SIEMIC and LG Electronics Inc., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Jae Cheon Lee, General Manager LG Electronics USA LG Electronics USA 1000 Sylvan Avenue, En glewood Cliffs, NJ 07632, USA

Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 SCS-F19: Confidentiality Request Letter Rev 1.0 Nov 14, 2006 Federal Communications Commission Authorization and Evaluation Division November 5, 2010 Confidentiality Request regarding application for certification of FCC ID: BEJE2370VV We hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name BLOCK DIAGRAM CONF(L)_E2370VV_BlkDia.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In addition to above mentioned documents, pursuant to Public DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following Exhibit Type File Name TEST SET UP PHOTOGRAPHS CONF(S)_ E2370VV_Tsup.pdf EXTERNAL PHOTOGRAPHS CONF(S)_ E2370VV_ExtPho.pdf INTERNAL PHOTOGRAPHS CONF(S)_ E2370VV_IntPho.pdf USER’S MANUAL CONF(S)_ E2370VV_UseMan.pdf The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Jae Cheon Lee, General Manager LG Electronics USA LG Electronics USA 1000 Sylvan Avenue, En glewood Cliffs, NJ 07632, USA

Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 1 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV APPENDIX E : EXTERNAL PHOTOGRAPHS Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 2 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 3 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 4 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 5 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 6 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 7 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 8 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV

Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 1 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV APPENDIX E : EXTERNAL PHOTOGRAPHS Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 2 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 3 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 4 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 5 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 6 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 7 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 8 / 8 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV

Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 1 / 2 EUT Type: LED LCD Monitor FCC ID: BEJE2370VV APPENDIX B : ID SAMPLE LABEL & LOCATION Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 2 / 2 EUT Type: LED LCD Monitor FCC ID: BEJE2370VV LABELLING REQUIREMENTS The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. „ ID Label „ ID Label Location of EUT ID Label

Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 1 / 2 EUT Type: LED LCD Monitor FCC ID: BEJE2370VV APPENDIX B : ID SAMPLE LABEL & LOCATION Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 2 / 2 EUT Type: LED LCD Monitor FCC ID: BEJE2370VV LABELLING REQUIREMENTS The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. „ ID Label „ ID Label Location of EUT ID Label

G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 1 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV APPENDIX F : INTERNAL PHOTOGRAPHS G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 2 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 3 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 4 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 5 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 6 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 7 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 8 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 9 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 10 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 11 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 12 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 13 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 14 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 15 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G

G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 1 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV APPENDIX F : INTERNAL PHOTOGRAPHS G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 2 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 3 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 4 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 5 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 6 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 7 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 8 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 9 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 10 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 11 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 12 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 13 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 14 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G Order Number : GETEC-C1-10-202 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-104 Page 15 / 15 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV G G G G

Order Number : GETEC-C1-10-202 FCC Class B Certification Test Report Number : GETEC-E3-10-104 Page2 / 28 EUT Type: LED LCD Monitor FCC ID.: BEJE2370VV CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................... 3 2. INTRODUCTION ........................................................................................................................................................ 4 3. PRODUCT INFORMATION ...................................................................................................................................... 5 3.1 DESCRIPTION OF EUT .............................................................................................................................................. 5 3.2 SUPPORT EQUIPMENT / CABLES USED ..................................................................................................................... 6 3.3 MODIFICATION ITEM(S) ........................................................................................................................................... 7 4. DESCRIPTION OF TESTS ......................................................................................................................................... 8 4.1 TEST CONDITION ...................................................................................................................................................... 8 4.2 CONDUCTED EMISSION ............................................................................................................................................ 9 4.3 RADIATED EMISSION .............................................................................................................................................. 10 5. CONDUCTED EMISSION ........................................................................................................................................ 11 5.1 OPERATING ENVIRONMENT ................................................................................................................................... 11 5.2 TEST SET-UP ........................................................................................................................................................... 11 5.3 MEASUREMENT UNCERTAINTY.............................................................................................................................. 11 5.4 LIMIT ...................................................................................................................................................................... 12 5.5 TEST EQUIPMENT USED .......................................................................................................................................... 12 5.6 TEST DATA FOR CONDUCTED EMISSION ................................................................................................................ 12 6. RADIATED EMISSION ............................................................................................................................................ 21 6.1 OPERATING ENVIRONMENT ................................................................................................................................... 21 6.2 TEST SET-UP ........................................................................................................................................................... 21 6.3 MEASUREMENT UNCERTAINTY........................................................................................................................…

Text truncated - open the document above for the full version.