BEJHBM700The LG Bluetooth Style-I

November 24, 2005 Federal Communications Commission Authorization and Evaluation Div. Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re: LG Electronics Inc. FCC ID: BEJHBM700 Request for Short-Term Confidentiality To Whom It May Concern: In accordance with 0.457 and 0.459 of CFR 47, LG Electronics Inc. requests short-term confidentiality for the test setup photos, external photos, internal photos, and user’s manual of the attached test report. These documents contain detailed system and equipment descriptions and related information about the product, which LG Electronics Inc. considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, LG Electronics feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Sincerely, E.S.Park Chief Research Engineer LG Electronics Inc. LG Electronics Inc. LGE Tel : 82-2-2033-3850 Fax : 82-2-2033-3855 [email protected] 459-9, Kasan-dong, Kemchun-ku Seoul 153-023, Korea

November 24. 2005 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 In re : LG Electronics Inc. FCC ID: BEJHBM700 POWER OF ATTORNEY To whom it may concern: We the undersigned LG Electronics Inc.hereby authorize ESTECH Co.,Ltd. (EST)of Korea to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by EST on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don ’t hesitate to contact us. Sincerely yours, E.S.Park Chief esearch Engineer Mobile Handset Lab LG Electronics Inc. Tel : 82-2-2033-3850 Fax : 82-2-2033-3855 [email protected] 459-9, Kasan-dong, Kemchun-ku Seoul 153-023, Korea LG Electronics Inc. LGE

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 November 21, 2005 RE: LG Electronics Inc. FCC ID: BEJGBM700 I have a few comments on the above referenced Application. 1) Please provide an operational description exhibit for this device. 2) A confidentiality Letter was not provided. Please confirm that confidentiality is not necessary or provide an appropriate cover letter. 3) Is final sample label exhibit available. It is preferred that an actual sample label or drawing is provided. 4) Time of occupancy currently appears to only support the time of a single pulse. Note that for compliance it must take into consideration that “the average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds multiplied by the number of hopping channels employed” (31.6 seconds). Please provide further information to support this. 5) Average measurements appear to contain a large delta between peak and average measurements which suggests an incorrect usage of VBW during the test.. Although procedures allow for VBW = 10 Hz to be used for average measurements, please note that this is only allowed if the carrier is on constantly (no pulsing). If the carrier is pulsed, then average measurements must be made with a VBW > 1/Ton pulse time – likely 2.2 kHz or higher for a DH1 mode. Alternatively a mathematical correction can be used for peak to average for the pulse times. Generally for Bluetooth, it is simpler to use a mathematical correction for averaging. Please correct as necessary. 6) This device is portable which requires testing in all 3 axis to obtain worse case results according to ANSI C63.4? Please review and correct as necessary. 7) Please provide information to support compliance to the 54 and 74 dBuV/m limits at the bandedges of 2390 MHz and 2483.5 MHz. 8) The users manual appears to be missing information regarding prohibition against co-location requirement. Please show where this may be located or update the manual to include the following or similar: The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 9) FYI...FCC ID cited in the manual is not completed. Timothy R. Johnson Examining Engineer mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Dear Timothy R. Johnson, How are you? I'm fine. Revised items uploaded now. -ATCB Comment- 1),2)items uploaded on 29/11. 3),4),5),7),8) items uploaded on 30/11. 6)Yes, that is worse case. And Required short term confidential from LG elec.(test setup photo,external photo, internal photo,manual,operate description, photos of test report) So I upload with do not revise items. This project is very urgent. Sorry , please hope receive the grant on this morning. Please help me. If here have any problem, let me know as soon as possible Page 1 of 1In 12/2/2005Printed for "Timothy R. Johnson" <[email protected]>

Photographs of EUT [ Front ] [ Rear ]

INTERNAL PHOTO 1. MAIN 1.1 Front 1.2 Rear 2.1 Battery 2.2 Power

Compliance Test Report for FCC Company name Address Telephone Product name Model No. Serial No. Test date Testing location Standard □ Class A ■ Class B Test resultOK □ Class A ■ Class B Test resultOK Tested by Reviewed by Abbreviation * Note - This test report is not permitted to copy partly without our permission - This test result is dependent on only equipment to be used - This test result based on a single evaluation of one sample of the above mentioned OK, Pass = Passed, Fail = Failed, N/A = not applicable LG Electronics Inc. 459-9, Kasan-dong, Keumchun-ku, Seoul 153-023, Korea 82-2-2033-3847 FAX :82-2-2033-3855 Measurement facility registration number Engineer J.H.Kim Manager Engineer J.M.Yang 94696 (Signature) (Signature) Date of issue ESTECH. Co., Ltd. 97-1 Hoiuk-Ri Majang-Myon, Icheon-city, KyungKi-Do, Korea Test item ■ Conducted Emission ■ Radiated Emission FCC PART 15 2002 , ANSI C 63.4 2003 2005-11- 11 ~ 2005-11-15 HBM-700 NONE LG Electronics Inc. KOREA Report Number : ESTF150511-006 , Web : www. estech. co. kr Page 1 of 29 Report NumberESTF150511-006 Manufacturer Country of origin Applicant Product 2005-11-15 Pen shaped device 4 5 6 7 10 10 10 10 11 12 13 13 13 15 15 15 15 15 17 17 17 17 18 8.4 Trace data ................................................................................................ ... 5. Carrier Frequency Separation ........................................................................... 6. Maximum Peak Output Power ........................................................................... Report Number : ESTF150511-006 , Web : www. estech. co. kr Page 2 of 29 5.4 Trace data ................................................................................................... 9.1 Test procedure .......................................................................................... 9.2 Test instruments and measurement setup ...................................................... 9.3 Measurement results .................................................................................... 9.4 Trace data of band-edge & out of emissioin ................................................... 7. Number of Hopping Frequency ........................................................................... 4. Measurement condition .................................................................................... Contents 1. Laboratory Information .................................................................................... 2. Descri ption of EUT .......................................................................................... 3. Test Standards ................................................................................................ 9. Band-Edge and Out of Band Emissions ............................................................... 5.1 Test procedure .......................................................................................... 5.2 Test instruments and measurement setup ...................................................... 5.3 Measurement results .................................................................................... 7.1 Test procedure .......................................................................................... 7.2 Measurement results .................................................................................... 8.1 Test procedure .......................................................................................... 8.2 Test instruments and measurement setup ...................................................... 8.3 Measurement results .................................................................................... 8. Time of Occupancy (Dwell Time) ........................................................................ 20 20 20 21 25 11.1 Measurement e quipment ...........................................................................25 11.2 Environmental conditions ........................................................................ ...25 26 29 29 29 Appendix 1. Spectral diagram Report Number : ESTF150511-006 , Web : www. estech. co. kr Page 3 of 29 12.2 Anetenna connected construction ............................................................... 10. Measurement of radiated emission ............................................................... ... 10.1 Measurement equipment ........................................................................... 10.2 Environmental conditions ........................................................................... 10.3 Test data ................................................................................................ 11. Measurement of conducted emission ............................................................ ... 12.1 Standard Applicable ................................................................................. 11.3 Test data ................................................................................................ 12. Antenna Re quirement ....................................................................................... 1. Laboratory Information 1.1 General 1.2 Test Lab. Corporation Name : ESTECH Co. Ltd Head Office : Rm 1015, World Venture Center II, 426-5, Gasan-dong, Geumcheon-gu, Seoul, Kor e (Safety & Telecom. Test Lab) EMC Test Lab : 58-1 Osan-Ri, GaNam-Myon, YeoJoo-Gun, KyungKi-Do, Korea 97-1 Hoiuk-Ri Majang-Myon, Icheon-city, KyungKi-Do, Korea 1.3 Official Qualification(s) MIC : Granted Accreditation from Ministry of Information & Communication for EMC, Safety and Telecommunication KOLAS : Accredited Lab By Korea Laboratory Accreditation Schema base on CENELEC requirements FCC : Filed Laboratory at Federal Communications Commission VCCI : Granted Accreditation from Voluntary Control Council for Interference from ITE This EUT (Equipment Under Test) has been shown to be capable of compliance with the applicable technical standards and is tested in accordance with the measurement procedures as indicated in th…

Text truncated - open the document above for the full version.

Photographs of test setup Setup for Radiated Test : 30 ~ 1000 MHz [ Front ] [ Rear ] Setup for Radiated Test :Above 1000 MHz Setup for Conducted Test : 0.15 ~ 30 MHz [ Front ] [ Rear ] Setup for Conducted Test [ 20dB Bandwidth Measurement ] [ Band-edge measurement ]