BEJLD803HLCD Monitor

APPENDIX G : FCC ID : BEJLD803H USER’S MANUAL Dell™ 1800FP Color Display User's Guide Information in this document is subject to change without notice. © 2001 Dell Computer Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Computer Corporation; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation; VESA is a registered trademark of Video Electronics Standards Association; IBM is a registered trademark of International Business Machines Corporation; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. As an ENERGY STAR Partner, Dell Computer Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entitles claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own. Initial release:04/05/2002 Preface Safety Instructions Introduction Setup Using the Display Troubleshooting Specifications Regulatory Notices Warranty Documentation Back to Contents Page Preface: Dell™ 1800FP Color Display User's Guide About This Guide • Notational Conventions About This Guide This guide is intended for anyone who uses the Dell 1800FP Color Display. It describes the display's features, setup, and operation. The sections are as follows:
Safety Instructions lists safety information.
Introduction gives an overview of the display’s features and provides an orientation to the display.
Setup describes the initial setup process.
Using the Display gives an overview of how to use the display.
Troubleshooting provides tips and solutions for common problems.
Specifications lists the technical specifications of the display.
Regulatory lists regulatory certifications and notices.
Warranty describes the warranty information for this product.
Documentation provides additional documentation that supports this product. Notational Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority. Back to Contents Page NOTE: A NOTE indicates important information that helps you make better use of your computer system. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the Back to Contents Page Safety Instructions: Dell™ 1800FP Color Display User's Guide Read and follow these instructions when connecting and using your computer display:
To help avoid damaging your computer, be sure that the voltage selection switch on the power supply is set to match the alternating current (AC) power available at your location:  115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as Japan, South Korea, and Taiwan.  230 V/50 Hz in most of Europe, the Middle East, and the Far East Also be sure that your display is electrically rated to operate with the AC power available in your location.
Never insert anything metallic into the display openings. Doing so may create the danger of electric shock.
To avoid electric shock, never touch the inside of the display. Only a qualified technician should open the display's case.
Never use your display if the power cable has been damaged. Do not allow anything to rest on the power cable, and keep the cable away from where people could trip over it.
Be sure to hold the plug, not the cable, when disconnecting the display from an electric socket.
Openings in the display cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the display on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the display in a bookcase or some other enclosed space, be sure to provide adequate ventilation.
Put your display in a location with low humidity and a minimum of dust. Avoid places like damp basement or dusty hallways.
Do not expose the display to rain or use it near water (in kitchens, next to swimming pools, etc.). If the display accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the display with a damp cloth when necessary, but be sure to unplug the display first.
Place the display on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped or sharply hit.
Locate your display near an easily accessible electric outlet.
If your display does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.
Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover should only be removed by qualified service personnel.
High temperatures can cause problems. Don't use your display in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.
Unplug the display when it is going to be left unused for an extended period of time.
Unplug your display from the electric outlet before any service. Back to Contents Page WARNING: Use of controls, adjustments, or procedures other than those specifi…

Text truncated - open the document above for the full version.

Attn.: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: LETTER OF AGENT AUTHORIZATION Dear Sir: We, the undersigned, hereby authorize MET laboratories Inc., to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This agreement expires one year from the current date. Sincerely, Kyeom Soon Kim May 3, 2002 LG Electronics Inc. /General Manager LG Electronics Inc.

FCC ID : BEJLD803H 1. External View [ Front ] [ Back ]

APPENDIX B : FCC ID : BEJLD803H Labelling Requirements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Cet appareil numérique de Ia classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. DELL COMPUTER CORPORATION One Dell Way Round Rock, Texas 78682 Chassis No.: CL-29 MADE IN KOREA MODEL NO. : 1800FP POWER : AC 100-240V 50/60Hz 1.0A SERIAL NO. : 204KG00001 MANUFACTURED : APRIL 2002 FCC ID : BEJLD803H LISTED 59B9 ITE E82982 Factory ID:GG Apparaten skall anslutas till jordat nätuttag ID Label Location

FCC ID : BEJLD803H 2. Internal View FCC ID : BEJLD803H 2. Internal View FCC ID : BEJLD803H 3-1. LCD Panel FCC ID : BEJLD803H 3-2. Main Board FCC ID : BEJLD803H 3-3. Control Board FCC ID : BEJLD803H 3-4. Power Board FCC ID : BEJLD803H 3-5. Inverter Board

FCC ID : BEJLD803H APPENDIX A : Test Graph 1. Radiated Emission 1-1. Analog Mode (1280*1024@75Hz) 1-1-1. 30 ~ 300 MHz (Hor.) 1-1-2. 30 ~ 300 MHz (Ver.) 1-1-3. 300 ~ 1000 MHz (Hor.) 1-1-4. 300 ~ 1000 MHz (Ver.) 1-2. Digital Mode (1280*1024@60Hz) 1-2-1. 30 ~ 300 MHz (Hor.)1-2-2. 30 ~ 300 MHz (Ver.) 1-2-3. 300 ~ 1000 MHz (Hor.)1-2-4. 300 ~ 1000 MHz (Ver.) 2. Conducted Emissions 2 -1. Analog Mode (1280*1024@75Hz) 2-1-1. Live Line2-1-2. Neutral Line 2-2. Digital Mode (1280*1024@60Hz) 2-2-1. Live Line2-2-2. Neutral Line FCC ID : BEJLD803H 1. Radiated Emissions 1-1. Analog Mode (1280*1024@75Hz) 1-1-1. 30 ~ 300 MHz (Hor.) 1-1-2. 30 ~ 300 MHz (Ver.) FCC ID : BEJLD803H 1-1-3. 300 ~ 1000 MHz (Hor.) 1-1-4. 300 ~ 1000 MHz (Ver.) FCC ID : BEJLD803H 1-2. Digital Mode (1280*1024@60Hz) 1-2-1. 30 ~ 300 MHz (Hor.) 1-2-2. 30 ~ 300 MHz (Ver.) FCC ID : BEJLD803H 1-2-3. 300 ~ 1000 MHz (Hor.) 1-2-4. 300 ~ 1000 MHz (Ver.) FCC ID : BEJLD803H 2. Conducted Emissions 2-1. Analog Mode (1280*1024@75Hz) 2-1-1. Live Line 2-1-2. Neutral Line FCC ID : BEJLD803H 2-2. Digital Mode (1280*1024@60Hz) 2-2-1. Live Line 2-2-2. Neutral Line

1/13 Report No.: 00431-4521-F2078 LG Electronics Inc. Q & R Center, 36, Munlae-dong, 6-ga, Youngdungpo-gu, Seoul, Korea Tel:+82-2-2630-3077~9, Fax:+82-2-2635-5543 LG Electronics Inc. Quality & Reliability Center 36, Munlae-dong, 6-ga, Youngdungpo-gu, Seoul 150-096, Korea Tel : + 82 2 2630 3077~9, Fax : +82 2 2635 5543 CERTIFICATION OF COMPLIANCE Date of Issue: May 3, 2002 Test Report No: 00431-4521-F2078 Applicant: LG Electronics Inc. Regulation: FCC Part 15 Class B / Canada Standard ICES-003 Class B Test procedure: ANSI C63.4-1992 / Canada Standard ICES-003 Equipment Class: Unintentional Radiators – Digital device EUT Type: 18” LCD Monitor Trade Name(s): Model No.: DELL 1800FP This device has been verified to comply with the applicable requirements in the FCC Part 15 / Canada Standard ICES-003 and was tested in accordance with the measurement procedures specified in ANSI C63.4-1992 / Canada Standard ICES-003. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Kyeom-Soon Kim / General Manager Quality and Reliability Center LG Electronics Inc. 2/13 Report No.: 00431-4521-F2078 LG Electronics Inc. Q & R Center, 36, Munlae-dong, 6-ga, Youngdungpo-gu, Seoul, Korea Tel:+82-2-2630-3077~9, Fax:+82-2-2635-5543 REPORT FOR A DIGITAL DEVICE Scope - Measurement and determination of electromagnetic emissions (EME) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission. U.S. Responsible Party: Address: LG Electronics USA Inc. 6133 North River Road,Suite 1100 (Riverway Plasza) Rosemont, IL 60018, USA Contact Person: P.H.Byun, General Manager Telephone No.: (847) 692-4630 EXT.329 Manufacturer: LG Electronics Inc. DID Division Address: 642 Jinpyoung-dong Kumi-City Kyoungsangbuk-do, 730-360, Korea FCC ID No.: BEJLD803H EUT Class: Unintentional Radiators - Digital device EUT Type: 18” LCD Monitor Trade Name: DELL Model No.: 1800FP Rule Part: FCC Part 15 Class B / Canada Standard ICES-003 Class B Test Procedure: ANSI C63.4-1992 / Canada Standard ICES-003 Date of Test: April 30 ~ May 2, 2002 Date of Receipt of EUT: April 26, 2002 Date of Issue: May 3, 2002 Test Report No.: 00431-4521-F2078 Test Result: Positive Quality and Reliability Center authorizes the above-named applicant to reproduce this report provided it is reproduced in its entirety. Quality and Reliability Center reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production unit of this model are manufactured with identical electrical and mechanical components. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. The Quality and Reliability Center was accredited by National Voluntary Laboratory Accreditation Program for the specific scope of accreditation under Lab Code: 200040-0. Tested by: Reviewed by : S. H. Ji / Senior Research Engineer Quality and Reliability Center LG Electronics Inc. D. H. Lee / Research Engineer Quality and Reliability Center LG Electronics Inc. 3/13 Report No.: 00431-4521-F2078 LG Electronics Inc. Q & R Center, 36, Munlae-dong, 6-ga, Youngdungpo-gu, Seoul, Korea Tel:+82-2-2630-3077~9, Fax:+82-2-2635-5543 CONTENTS Page 1. GENERAL INFORMATION ..................................................................................................................... 4G 1.1 D ESCRIPTIONS OF EQUIPMENT UNDER TEST (EUT)................................................................................... 4G 1.2 R EGULATIONS APPLIED TO EUT ............................................................................................................... 4G 1.3 M EASUREMENT PROCEDURE.................................................................................................................... 4G 1.4 M EASUREMENT PLACE............................................................................................................................. 4G 2. GENERAL TEST CONDITIONS .............................................................................................................. 5G 2.1 O PERATING CONDITIONS OF EUT ............................................................................................................. 5G 2.2 S TABILIZATION OF EUT OPERATING......................................................................................................... 5G 2.3 T EMPERATURE AND HUMIDITY................................................................................................................. 5G 3. TEST SITE ................................................................................................................................................... 5G 3.1 S EMI-ANECHOIC CHAMBER....................................................................................................................... 5G 3.2 A SHIELDED ENCLOSURE.......................................................................................................................... 5G 4. CALIBRATIONS OF MEASURING INSTRUMENTS .......................................................................... 5G 5. DESCRIPTION OF TEST CONDITION .................................................................................................. 6G 5.1 P OWER LINE CONDUCTED EMISSION MEASUREMENTS............................................................................... 6G 5.2 R ADIATED EMISSIONS MEASUREMENTS.................................................................................................... 7G 6. MEASURING INSTRUMENTS AND SET-UP .....................................................…

Text truncated - open the document above for the full version.

FCC ID : BEJLD803H APPENDIX E : 1. Radiated Emission 2. Conducted Emission Test Set-up Photographs FCC ID : BEJLD803H 1. Radiated Emission FCC ID : BEJLD803H 2. Conducted Emission