BEJLGSBWAC23RF Module

User Manual PRODUCT NAME : 802.11a/b/g/n/ac + Bluetooth Combo Module MODEL NAME : LGSBWAC23 (ETWCFRBC01) (00)-0073 The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek. USER MANUAL PAGE : REG. DATE : 2022.06.24 MODEL NAME :ETWCFRBC01 (LGIT) LGSBWAC23 (LGE) REV. DATE : 2022.06.24 REV.NO : 1.0 1 / 7 LG Innotek Confidential : This document is protected by security policies and laws. [Confidential] Index NoDescriptionPage 1Features2 2Block Diagram3 3Absolute Maximum Ratings 3 4Operating Conditions 4 5Standard Test Conditions4 6Pin Description5 7Mechanical Characteristics6 8Outline Drawing7 USER MANUAL PAGE : REG. DATE : 2022.06.24 MODEL NAME :ETWCFRBC01 (LGIT) LGSBWAC23 (LGE) REV. DATE : 2022.06.24 REV.NO : 1.0 2 / 7 LG Innotek Confidential : This document is protected by security policies and laws. [Confidential] 1.Features ETWCFRBC01 is the small size and low power module for IEEE 802.11ac wireless LAN & BT5.0 + HS. ETWCFRBC01 is based on Realtek RTL8822CU solution. IEEE 802.11 a/b/g/n/ac Dual Band Bluetooth 5.0 + HS, BLE Size : 48.4 x 30.0 x 7.7 mm Two stream spatial multiplexing up to 300Mbps (802.11n) / 866.7Mbps (802.11ac ) Use on-chip OTP (One-Time Programmable) Host Interface : USB2.0 (WLAN & BT) - This model is using the common USB2.0 to control WLAN and BT Sec urity : 802.11e 802.11i (WPA, WPA2), WAPI WAPI, WEP, WPA, WPA2, WMM, AES, TKIP, CKP Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB USER MANUAL PAGE : REG. DATE : 2022.06.24 MODEL NAME :ETWCFRBC01 (LGIT) LGSBWAC23 (LGE) REV. DATE : 2022.06.24 REV.NO : 1.0 3 / 7 LG Innotek Confidential : This document is protected by security policies and laws. [Confidential] 3. Absolute Maximum Ratings ParameterMinMaxUnit Storage Temperature-20+80°C Storage Humidity (40°C)-90% Caution: The specifications in Table 1 define levels at which permanent damage to t he dev ice can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect t he l ong-term reliability of the device. 2. Block Diagram . Other conditions 1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40°Cand 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. < Table 1 > USER MANUAL PAGE : REG. DATE : 2022.06.24 MODEL NAME :ETWCFRBC01 (LGIT) LGSBWAC23 (LGE) REV. DATE : 2022.06.24 REV.NO : 1.0 4 / 7 LG Innotek Confidential : This document is protected by security policies and laws. [Confidential] 4. Operating Conditions ParameterMinTypMaxUnit Ambient Temperature060°C Ambient Humidity (40°C)85% Supply Voltage3.1353.33.6Vdc 5. Standard Test Conditions The Test for electrical specification shall be performed under the following condition Otherwise this following conditions, not guaranteed this performance. Temperature 25 ±5°C Humidity 65 ±5% Input powerSupply Voltage VDD_3.3V3.135 ~ 3.6V 5- 1. Ambient condition 5- 2. Power supply voltages 5- 3. Current consumption Human Body Model (HBM)Min.Max.Unit Contact ±4 kV Air ±15 5- 4. ESD Information Note 1. IEC 61000-4-2 (150pF, 330R) Note 2. Test condition : After 8-pin USB Cable connect to module, progress ESD test. Current ConsumptionMin.Typ.Max.Unit TX Mode ( 11ac/80MHz)1200 mA Idle and Associated state320 Radio disabled state100 Note 1. This figure is the RMS(root mean square) value. USER MANUAL PAGE : REG. DATE : 2022.06.24 MODEL NAME :ETWCFRBC01 (LGIT) LGSBWAC23 (LGE) REV. DATE : 2022.06.24 REV.NO : 1.0 5 / 7 LG Innotek Confidential : This document is protected by security policies and laws. [Confidential] 6. Pin Description Pin No.Pin NameI/OPin Description 1VCCIVDD 3.3V 2D-I/OUSB Communication signal (USB_DN) 3D+I/OUSB Communication signal (USB_DP) 4GND-GND 5WOWLOWake On WLAN 6VCCIVDD 3.3V 7NC-No connection 8GND-GND 9RESETI RESET 10WOBLEO Host wake up. (Signal from Wi-Fi module to the host) 11GND-GND 12VCC-VDD 3.3V USER MANUAL PAGE : REG. DATE : 2022.06.24 MODEL NAME :ETWCFRBC01 (LGIT) LGSBWAC23 (LGE) REV. DATE : 2022.06.24 REV.NO : 1.0 6 / 7 LG Innotek Confidential : This document is protected by security policies and laws. [Confidential] 7. Mechanical Characteristics 1) Outline view ItemTest Conditions AssemblyNo defects of wiring, soldering and assembling Appearance No dirt, rust, corrosion or foreign material 2) Appearance structure ItemTest Conditions DimensionAs assembly drawing MountingAsassemblydrawing Weight6g USER MANUAL PAGE : REG. DATE : 2022.06.24 MODEL NAME :ETWCFRBC01 (LGIT) LGSBWAC23 (LGE) REV. DATE : 2022.06.24 REV.NO : 1.0 7 / 7 LG Innotek Confidential : This document is protected by security policies and laws. [Confidential] 8. Outline Drawing Kap Soul Lee '22. 06. 10 Je Hyuk Moon 3D View '22. 06. 10 '22. 06. 10 Seok Dong Choi PAGE : REG. DATE : 2022.06.24 USER MANUAL MODEL NAME : ETWCFRBC01 (LGIT) LGSBWAC23 (LGE) REV. DATE : 2022.06.24 REV.NO : 1.0 1 / 16 LG Innotek Confidential : This document is protected by security policies and laws. [Confidential] Regulatory Statement (FCC) •Part 15. 19 Statement This device complies with Part15 ofthe FCC Rules. Operationis subjectto the following two conditions: (1) this device may not cause harmful interference,and (2) this device must acceptany interference received, including interference that may cause undesired operation. •Part 15. 105 Statement (ClassB) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate rad…

Text truncated - open the document above for the full version.

Date : Nov. 9, 2017 Rev : 2.3 HACS-F004 FCC Agent Authorization Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC FCC Agent Authorization Letter Date : Nov. 9, 2017 Rev : 2.3 HACS-F004 FCC Agent Authorization Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC REVISION TABLE Rev Description of Change Date Approved 1.0 Original Release(Obsolete) 06/14/2012 QM 2.0 Updated template(Obsolete) 10/01/2012 QM 2.1 Updated address(Obsolete) 01/10/2014 QM 2.2 Updated address 11/18/2016 QM 2.3 Fixed Typo “Agent” 11/09/2017 QM LG Electronics USA HACS-F004 FCC Agent Authorization Letter Rev : 2.3 DATE : 07/28/2022 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To whom it may concern: Subject : FCC Agent Authorization Letter for FCC ID : BEJLGSBWAC23 We, the undersigned, hereby authorize HCT CO., LTD. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT CO., LTD. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). We recognize that we are still responsible for the terms and conditions outlined in the HCT America Client Services Agreement. This authorization is valid until further written notice from the applicant. Sincerely, Signed by: (Name / Title) Sung Soo Kim / Director, NA Regulatory and Environmental Affairs (Email Address) sungsoo.kim @lge.com (Address) LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey,United States

Date : Nov. 09, 2017 Rev : 3.0 FCC Confidentiality Request Letter HACS-F003 FCC Confidentiality Request Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC Date : Nov. 09, 2017 Rev : 3.0 REVISION TABLE Rev Description of Change Date Approved 1.0 Original Release(Obsolete) 06/14/2012 QM 2.0 Updated template(Obsolete) 10/01/2012 QM 2.1 Updated address(Obsolete) 01/10/2014 QM 2.2 Updated address 11/18/2016 QM 3.0 Updated LTC and STC Confidentiality table 11/09/2017 QM HACS-F003 FCC Confidentiality Request Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC LG Electronics USA DATE : July 28, 2022 To: Federal Communications Commission Authorization and Ev aluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT : Request for Confidentiality for FCC ID : BEJLGSBWAC23 We hereby request confidential treatment of the information accompanying this application as outlined below: LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST LONG-TERM CONFIDENTIAL Exhibit Description 1 Block Diagram 2 Operational Description 3 Parts List 4 Schematics SHORT-TERM CONFIDENTIAL (180 DAYS) 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User’s Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signed by: (Name / Title) Sung Soo Kim / Director, NA Regulatory and Environmental Affairs (Email Address) sungsoo.kim @lge.com (Address) LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey,United States HACS-F003 FCC Confidentiality Request Letter Rev : 3.0

Date : Jul. 16, 2018 Rev : 3.2 HACS-F007 Modular Approval Declaration Letter HCT America LLC ([email protected]) 1726 Ringwood Ave., San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC Modular Approval Declaration Letter Date : Jul. 16, 2018 Rev : 3.2 HACS-F007 Modular Approval Declaration Letter HCT America LLC ([email protected]) 1726 Ringwood Ave., San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC REVISION TABLE Rev Description of Change Date Approved 1.0 Original Release(Obsolete) 06/14/2012 QM 2.0 Updated Template(Obsolete) 10/01/2012 QM 2.1 Updated address (Obsolete) 01/10/2014 QM 3.0 Updated Template(Obsolete) 03/30/2015 QM 3.1 Updated Address 06/21/2018 QM 3.2 Changed File Name and Split Files FCC/IC 7/16/2018 QM LG Electronics USA Rev : 3.2 Date : July 28, 2022 FCC Modular Approval Attestation FCC ID: BEJLGSBWAC23 is seeking FCC equipment authorization as Single Modular Transmitter Single Limited Modular Transmitter Product Information Product Description: RF Module FRN: 0023476120 Model Name(s): LGSBWAC23 FCC Product ID: - FCC Module ID: BEJLGSBWAC23 Modular Checklist/Information For Modular Approval, the module shall meet all the requirements listed below. Please check () if the module complies with the stated requirement. The modular transmitter must have its own shielding. The modular transmitter must have buffered modulation/data inputs. The modular transmitter must have its own power supply regulation. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c). The modular transmitter must tested in a stand-alone configuration. The modular transmitter must be labeled with its own FCC ID number. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instruction along with the module to explain any such requirements. The modular transmitter must comply with any applicable RF exposure requirements. If a module(s) does NOT meet one or more of the above listed requirements, the applicant may request Limited Modular Approval (LMA). For LMA, please state details about why the above requirement(s) could not be met; and state how control of the end product, into which the module will be installed, will be maintained by the applicant / manufacturer, such that full compliance of the end product is always ensured: (Name / Title) Sung Soo Kim / Director, NA Regulatory and Environmental Affairs (Email Address) sungsoo.kim @lge.com (Address) LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey,United States HACS-F007-1 FCC Modular Approval Declaration Letter

FCC ID: BEJLGSBWAC23, IC: 2703H-LGSBWAC23 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 3 EXTERNAL PHOTOGRAPHS FCC ID: BEJLGSBWAC23, IC: 2703H-LGSBWAC23 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 3 ■ EXTERNAL PHOTO FCC ID: BEJLGSBWAC23, IC: 2703H-LGSBWAC23 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 3 ■ EXTERNAL PHOTO

2 / 3 LG Innotek Confidential : This document is protected by security policies and laws. [Confidential] PCB Silk (Top) 30 mm 48 mm 3 / 3 LG Innotek Confidential : This document is protected by security policies and laws. [Confidential] PCB Silk (Bottom)

FCC ID: BEJLGSBWAC23, IC: 2703H-LGSBWAC23 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 4 INTERNAL PHOTOGRAPHS FCC ID: BEJLGSBWAC23, IC: 2703H-LGSBWAC23 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 4 ■ INTERNAL PHOTO FCC ID: BEJLGSBWAC23, IC: 2703H-LGSBWAC23 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 4 ■ INTERNAL PHOTO FCC ID: BEJLGSBWAC23, IC: 2703H-LGSBWAC23 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 4 ■ INTERNAL PHOTO BT Ant WLAN Ant1 WLAN Ant2

TEST REPORT FCC/ISED MPE Test for LGSBWAC23 Certification APPLICANT LG Electronics Inc. REPORT NO. HCT-RF-2207-FI009 DATE OF ISSUE July 20, 2022 Tested by Kyung Jun Woo Technical Manager Se Wook Park Accredited by KOLAS, Republic of KOREA F-TP22-03(Rev.04) HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 1 / 8 The report shall not be reproduced except in full(only partly) without approval of the laboratory. F-TP22-03 (Rev. 04) Page 2 of 8 HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 TEST REPORT FCC MPE Test for LGSBWAC23 REPORT NO. HCT-RF-2207-FI009 DATE OF ISSUE July 20, 2022 Additional Model - A pplicantLG Electronics Inc. 222, LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, 451-713, Republic of Korea Eut Type Model Name RF Module LGSBWAC23 FCC IDBEJLGSBWAC23 Frequency range2 402 MHz ᄧ 2 480 MHz (Bluetooth) 2 412 MHz ~ 2 472 MHz (WLAN) 5 180 MHz ~ 5 825 MHz (UNII) The result shown in this test report refer only to the sample(s) tested unless otherwise stated. This test results were applied only to the test methods required by the standard. Report No. HCT-RF-2207-FI009 F-TP22-03 (Rev. 04) Page 3 of 8 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 July 20, 2022 Initial Release Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules under normal use and maintenance KOLAS Statement: The above Test Report is the accredited test result by (KS Q) ISO/IEC 17025 and KOLAS(Korea Laboratory Accreditation Scheme), which signed the ILAC-MRA. (KOLAS Accreditation No. KT197) If this report is required to confirmation of authenticity, please contact to www.hct.co.kr Report No. HCT-RF-2207-FI009 F-TP22-03 (Rev. 04) Page 4 of 8 RF Exposure Statement 1. Limit According to §1.1310, §2.1091 RF exposure is calculated. (B) Limits for General Population/Uncontrolled Exposures Frequency range (MHz) Electric field Strength (V/m) Magnetic field Strength (A/m) Power density (mW/cm²) Averaging time (minutes) 0.3 - 1.34 1.34 - 30 30 - 300 300 - 1500 1500 - 100.000 614 824/f 27.5 ... ... 1.63 2.19/f 0.073 ... ... *(100) *(180/ f²) 0.2 f/1500 1.0 30 30 30 30 30 F = frequency in MHz * = Plane-wave equivalent power density 2. Maximum Permissible Exposure Prediction Prediction of MPE limit at a given distance ଶ S = Power density P = Power input to antenna G = Power gain to the antenna in the direction of interest relative to an isotropic radiator R = Distance to the center of radiation of the antenna Report No. HCT-RF-2207-FI009 F-TP22-03 (Rev. 04) Page 5 of 8 3. RESULTS 3-1. Bluetooth Max Average output Power at antenna input terminal 10.00 dBm Max Average output Power at antenna input terminal 10.00 mW Prediction distance 20.00 cm Prediction frequency 2402 ᄧ 2480 MHz Antenna Gain(typical) 1.12 dBi Antenna Gain(numeric) 1.294 - Power density at prediction frequency( S) 0.0026 mW/cm 2 MPE limit for uncontrolled exposure at prediction frequency 1.0000 mW/cm 2 2.1091 EIRP 11.12 (dBm) ERP 8.97 (dBm) ERP 0.008 (W) ERP Limit 3.00 (W) MARGIN 25.80 (dB) Report No. HCT-RF-2207-FI009 F-TP22-03 (Rev. 04) Page 6 of 8 3-1. BT LE Max Average output Power at antenna input terminal 10.00 dBm Max Average output Power at antenna input terminal 10.00 mW Prediction distance 20.00 cm Prediction frequency 2402 ᄧ 2480 MHz Antenna Gain(typical) 1.12 dBi Antenna Gain(numeric) 1.294 - Power density at prediction frequency( S) 0.0026 mW/cm 2 MPE limit for uncontrolled exposure at prediction frequency 1.0000 mW/cm 2 2.1091 EIRP 11.12 (dBm) ERP 8.97 (dBm) ERP 0.008 (W) ERP Limit 3.00 (W) MARGIN 25.80 (dB) Report No. HCT-RF-2207-FI009 F-TP22-03 (Rev. 04) Page 7 of 8 3-1. DTS_MIMO Max Average output Power at antenna input terminal 23.00 dBm Max Average output Power at antenna input terminal 199.53 mW Prediction distance 20.00 cm Prediction frequency 2412 ᄧ 2472 MHz Directional Gain (typical) 1.71 dBi Directional Gain (numeric) 1.483 - Power density at prediction frequency( S) 0.0588 mW/cm 2 MPE limit for uncontrolled exposure at prediction frequency 1.0000 mW/cm 2 2.1091 EIRP 24.71 (dBm) ERP 22.56 (dBm) ERP 0.180 (W) ERP Limit 3.00 (W) MARGIN 12.21 (dB) Report No. HCT-RF-2207-FI009 F-TP22-03 (Rev. 04) Page 8 of 8 3-1. UNII_MIMO Max Average output Power at antenna input terminal 19.00 dBm Max Average output Power at antenna input terminal 79.43 mW Prediction distance 20.00 cm Prediction frequency 5180 ᄧ 5825 MHz Directional Gain (typical) 4.51 dBi Directional Gain (numeric) 2.825 - Power density at prediction frequency( S) 0.0446 mW/cm 2 MPE limit for uncontrolled exposure at prediction frequency 1.0000 mW/cm 2 2.1091 EIRP 23.51 (dBm) ERP 21.36 (dBm) ERP 0.137 (W) ERP Limit 3.00 (W) MARGIN 13.41 (dB) Worst Case: Simultaneous MPE 20cm is 2.4G MIMO WLAN (0.0558) + BT (0.0026) = 0.0584 < 1

TEST REPORT FCC/ISED BT Test for LGSBWAC23 Certification APPLICANT LG Electronics Inc. REPORT NO. HCT-RF-2206-FI010 DATE OF ISSUE July 20, 2022 Tested by Kyung Jun Woo Technical Manager Se Wook Park Accredited by KOLAS, Republic of KOREA F-TP22-03(Rev.04) HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 1 / 91 The report shall not be reproduced except in full(only partly) without approval of the laboratory. F-TP22-03 (Rev. 04) Page 2 of 91 HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 TEST REPORT FCC/ISED BT Test for LGSBWAC23 REPORT NO. HCT-RF-2206-FI010 DATE OF ISSUE July 20, 2022 Additional Model - A pplicantLG Electronics Inc. 222, LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, 451-713, Republic of Korea Eut Type Model Name RF Module LGSBWAC23 FCC ID IC BEJLGSBWAC23 2703H-LGSBWAC23 Max. RF Output Power12.073 dBm (16.12 mW) FCC ClassificationFCC Part 15 Spread Spectrum Transmitter FCC Rule Part(s) Part 15 subpart C 15.247 ISED Rule Part(s) RSS-247 Issue 2 (February 2017) RSS-Gen Issue 5_Amendment 2 (February 2021) The result shown in this test report refer only to the sample(s) tested unless otherwise stated. T his test results were applied only to the test methods required by the standard. Report No. HCT-RF-2206-FI010 F-TP22-03 (Rev. 04) Page 3 of 91 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 July 20, 2022 Initial Release Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC / ISED Rules under normal use and maintenance. KOLAS Statement: The above Test Report is the accredited test result by (KS Q) ISO/IEC 17025 and KOLAS(Korea Laboratory Accreditation Scheme), which signed the ILAC-MRA. (KOLAS Accreditation No. KT197) If this report is required to confirmation of authenticity, please contact to www.hct.co.kr Report No. HCT-RF-2206-FI010 F-TP22-03 (Rev. 04) Page 4 of 91 CONTENTS 1. EUT DESCRIPTION 5 2. Requirements for Bluetooth transmitter(15.247/ RSS-247) 6 3. TEST METHODOLOGY 7 EUT CONFIGURATION 7 EUT EXERCISE 7 GENERAL TEST PROCEDURES 7 DESCRIPTION OF TEST MODES 8 4. INSTRUMENT CALIBRATION 8 5. FACILITIES AND ACCREDITATIONS 8 FACILITIES 8 EQUIPMENT 8 6. ANTENNA REQUIREMENTS 9 7. MEASUREMENT UNCERTAINTY 10 8. DESCRIPTION OF TESTS 11 9. SUMMARY OF TEST RESULTS 33 10. TEST RESULT 34 10.1 PEAK POWER 34 10.2 BAND EDGES 40 10.3 FREQUENCY SEPARATION / OCCUPIED BANDWIDTH (99 % BW) 47 10.4 NUMBER OF HOPPING FREQUENCY 55 10.5 TIME OF OCCUPANCY (DWELL TIME) 59 10.6 SPURIOUS EMISSIONS 65 10.6.1 CONDUCTED SPURIOUS EMISSIONS 65 10.6.2 RADIATED SPURIOUS EMISSIONS 73 10.6.3 RADIATED RESTRICTED BAND EDGES 81 10.7 RECEIVER SPURIOUS EMISSIONS 84 10.8 POWERLINE CONDUCTED EMISSIONS 85 11. LIST OF TEST EQUIPMENT 89 12. ANNEX A_ TEST SETUP PHOTO 91 Report No. HCT-RF-2206-FI010 F-TP22-03 (Rev. 04) Page 5 of 91 1. EUT DESCRIPTION Model LGSBWAC23 Additional Model - EUT Type RF Module Power Supply DC 3.30 V Frequency Range 2 402 MHz ᄧ 2 480 MHz Max. RF Output Power 12.073 dBm (16.12 mW) BT Operating Mode Normal, EDR, AFH Modulation Type GFSK(Normal), π/4DQPSK and 8DPSK(EDR) Modulation Technique FHSS Number of Channels 79Channels, Minimum 20 Channels(AFH) Antenna Specification Metal press Antenna Peak Gain : 1.12 dBi Date(s) of Tests June 08, 2022 ~ July 19, 2022 PMN (Product Marketing Number) RF Module HVIN (Hardware Version Identification Number) LGSBWAC23 FVIN (Firmware Version Identification Number) 1.0 HMN (Host Marketing Name) N/A EUT serial numbers Radiated: ETWCFRBC01-01 Conducted : ETWCFRBC01-02 Factory 1) PT. LG INNOTEK INDONESIA Bekasi International Industrial Estate, Blok C8 NO. 12 & 12 A, Desa Cibatu, Cikarang Selatan, Bekasi 17750 Indonesia 2) COMPAL NETWORKING(KUNSHAN)CO.,LTD No. 520, Nanbang Rd, Economic & Technical Development Zone, Kunshan, Jiangsu Province, China Report No. HCT-RF-2206-FI010 F-TP22-03 (Rev. 04) Page 6 of 91 2. Requirements for Bluetooth transmitter(15.247/ RSS-247) This Bluetooth module has been tested by a Bluetooth Qualification Lab, and we confirm the following: 1) This system is hopping pseudo-randomly. 2) Each frequency is used equally on the average by each transmitter. 3) The receiver input bandwidths that match the hopping channel bandwidths of their corresponding transmitters 4) The receiver shifts frequencies in synchronization with the transmitted signals. ▪ 15.247(g): The system, consisting of both the transmitter and the receiver, must be designed to comply with all of the regulations in this Section 15.247 should the transmitter be presented with a continuous data (or information) stream. ▪ 15.247(h): The coordination of frequency hopping systems in any other manner for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters is not permitted. The coordination of frequency hopping systems in any other manner for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters is not permitted. ▪ RSS-247 5.1 (a): The system receivers shall have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shall shift frequencies in synchronization with the transmitted signals. The coordination of frequency hopping systems in any other manner for the express purpose of avoiding the simultaneous occupancy of individual hoppin…

Text truncated - open the document above for the full version.

SPECIFICATIONS The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek. PRODUCT NAME : WiFi Dual Band & BT Antenna MODEL NAME : ETWCFRBC01 (LGIT) Ant. S P E C I F I C A T I O N PAGE : REG. DATE : 2022.05.18 REV. DATE : 2022.05.18 REV.NO : 1.0 1 / 10 MODEL NAME : ETWCFRBC01(LGIT) LGSBWAC23(LGE) LG InnotekConfidential : This document is protected by security policies and laws. [Confidential] Change History of Revision RevisionDateContents of Revision ChangeRemark 1.02022.05.18Wi-Fi & BT ANT SpecY.U.Jeong S P E C I F I C A T I O N PAGE : REG. DATE : 2022.05.18 REV. DATE : 2022.05.18 REV.NO : 1.0 2 / 10 MODEL NAME : ETWCFRBC01(LGIT) LGSBWAC23(LGE) LG InnotekConfidential : This document is protected by security policies and laws. [Confidential] Table of Contents NoDescriptionPage 1ANT Features3 2Antenna Characteristics3 2.1 Network Data5 2.2 Efficiency8 2.3 Radiation Pattern9 3ANT Test Condition 9 4ANT Dimension10 S P E C I F I C A T I O N PAGE : REG. DATE : 2022.05.18 REV. DATE : 2022.05.18 REV.NO : 1.0 3 / 10 MODEL NAME : ETWCFRBC01(LGIT) LGSBWAC23(LGE) LG InnotekConfidential : This document is protected by security policies and laws. [Confidential] 2. Antenna Characteristics 1. ANT Features - Dual Bands Wi-Fi & BT ANT - Main Frequency: 2.45GHz, 5.5GHz - Frequency range : From 2.40 to 2.50GHz, 5GHz~6GHz - Operating temperature range : -35 to +95°C (typ.) - Wi-Fi ANT Material : Metal press + Printed of FR-4 - BT ANT material : Metal press Antenna Performance ParameterMinTypMaxUnit Frequency Range 240024502500MHz 500055006000MHz Directivity-Omni-- Full Bands Average Gain--3.69- dBi Full Bands Peak Gain-1.50 V.S.W.R3:1--Under Imp…

Text truncated - open the document above for the full version.