
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
- 1 - User Manual LG-LX325 Ver. 0.1 2004.05.06 - 2 - LIMITED WARRANTY STATEMENT 1. WHAT THIS WARRANTY COVERS: LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product. (2) The limited warranty extends on to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user. (3) This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada. (4) The external housing and cosmetic parts shall not be covered under these limited warranty terms. (5) Upon request from LG, the consumer must provide information to reasonably prove the date of purchase. (6) The customer shall bear the cost of shipping the product to the Customer Service Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty. 2. WHAT THIS WARRANTY DOES NOT COVER: (1) Defects or damages resulting from use of the product in other than its normal and customary manner. (2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping blown fuses spills of food or liquid. (3) Breakage or damage to antennas unless caused directly by defects in material or workmanship. (4) That the Customer Service Department at LG was net notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period. (5) Products which have had the serial number removed or made illegible. (6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by operations law, statutory or otherwise, including, but limited to any implied warranty of marketability or fitness for a particular use. (7) Damage resulting from use of non-LG approved accessories. (8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use. (9) Products operated outside published maximum ratings. - 3 - (10) Products used or obtained in a rental program. (11) Consumables (such as fuses). 3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 4. HOW TO GET WARRANTY SERVICE: To obtain warranty service, please call the following telephone number from anywhere in the continental United States: LG Infocomm Inc. 201 James Record Road Huntsville, AL 35824 Tel. 1-800-793-8896 Fax. 1-800-448-4026 www.lgeservice.com DO NOT RETURN YOUR PRODUCT TO THE ABOVE ADDRESS. Please call or write for the location of the LGIC authorized service center nearest you and for the procedures for obtaining warranty claims. ] - 4 - SUBJECT The LX325 phone has been designed to operate on the latest digital mobile communication technology, Code Division Multiple Access (CDMA). This CDMA digital technology has greatly enhanced voice clarity and can provide a variety of advanced features. Currently, CDMA mobile communication technology has been commercially used in Cellular(DCN) and Personal Communication Service (PCS). The difference between them is the operating frequency spectrum. Cellular uses 800MHz and PCS uses 1.9GHz. The LX325 can operate on both frequency, we usually call it Dual-band phone. Also, LX325 works on Advanced Mobile Phone Service (AMPS). We call it Tri-mode phone. If one of the DCN, PCS and AMPS base stations is located nearby, Call fail rate of Tri-mode phone is less than dual-mode phone or single-mode phone. The CDMA technology adopts DSSS (Direct Sequence Spread Spectrum). This feature of DSSS enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area, resulting that it increases the capacity 10 times more compared with that in the analog mode currently used. Soft/Softer Handoff, Hard Handoff, and Dynamic RF power Control technologies are combined into this phone to reduce the call being interrupted in a middle of talking over the phone. Cellular and PCS CDMA network consists of MSO (Mobile Switching Office), BSC (Base Station Controller), BTS (Base station Transmission System), and MS (Mobile Station). The following table lists some major CDMA Standards. CDMA Standard Designator Description Basic air interface TIA/EIA/IS-95-A ANSI J-STD-008 Protocol between MS and BTS for Cellular & AMPS Protocol between MS and BTS for PCS Network TIA/EIA/IS-634 TIA/EIA/IS/651 TIA/EIA/IS-41-C TIA/EIA/IS-124 MAS-BS PCSC-RS Intersystem operations Nom-signaling data comm. Service TIA/EIA/IS-96-B TIA/EIA/IS-99 TIA/EIA/IS-637 TIA/EIA/IS-657 Speech CODEC Assign data and fax Short message service Packet data Performance TIA/EIA/IS-97 TIA/…
Text truncated - open the document above for the full version.
Page 1 Page ’ 1. Bluetooth Bluetooth Sub Level Menu <Disable Bluetooth> <Add New> Amy Headset2 PC1 F F H h P B Enable Bluetooth Disable Bluetooth Disable BT O Page 2 Page ’ 2. Bluetooth Bluetooth Sub Level Menu <Disable Bluetooth> <Add New> Amy Headset2 PC1 F F F H h P B Searching & Paring Wait for Paring Add New Add New Searching... <Re-search> Found Device1 H Enter PIN Code : Next Mode : [123] Cancel PIN Code Page 3 Page ’ – Bluetooth Bluetooth Sub Level Menu <Disable Bluetooth> <Add New> Amy Headset2 PC1 F F F H h P B Amy Headset1 Connect Rename Erase H Rename Enter : Save Mode : [Abc#] Cancel Amy Page 4 Page ’ – Bluetooth Bluetooth Sub Level Menu <Disable Bluetooth> <Add New> Amy Headset2 PC1 F F F H h P B Amy PC1 Rename Erase P Rename Enter : Save Mode : [Abc#] Cancel Amy Page 5 Page ’ – Bluetooth My BluetoothName : Bluetooth Amy My BluetoothName Visibility My Bluetooth Address
June 21, 2004 Federal Communications Commission Authorization and Evaluation Div. Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re: LG Electronics Inc. FCC ID: BEJLX325 Request for Short-Term Confidentiality To Whom It May Concern: In accordance with 0.457 and 0.459 of CFR 47, LG Electronics Inc. requests short-term confidentiality for the test setup photos, external photos, internal photos, and user’s manual of the attached test report. These documents contain detailed system and equipment descriptions and related information about the product, which LG Electronics Inc. considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, LG Electronics feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Sincerely,
May 24. 2004 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re : LG Electronics Inc.. Tri-band Quad-mode CDMA Phone (Amps/Cellular/PCS/GPS) Part 22, 24 Certification Request for Confidentiality Gentlemen: In accordance with 0.459 of CFR 47, LG Electronics, Inc. hereby requests confidentiality of the Block Diagrams attachment, Schematic Diagrams & Circuit Description attachment, Operational Description attachment, and Parts List/Tune-Up Procedure attachment for the above-referenced Type Acceptance application. These documents contain detailed system and equipment description and related information about the product which LG Electronics Inc. Considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, LG Electronics Inc. considers this information to be of benefit to its competitors, such that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, E.S.Park Senior Research Engineer CDMA Handset Lab LG Electronics Inc. Tel : 82-2-850-3850 Fax : 82-2-850-3861 [email protected] 459-9, Kasan-dong,Kemchun-ku Seoul 153-023, Korea LG Electronics Inc. LGE AFFIDAVIT FOR ESN PROTECTION OF CELLULAR MOBILE TELEPHONES We hereby certify that the LGE Handheld Portable Cellular Telephone(FCC ID: BEJLX325) is so designed that it complies with all the requirements for ESN protection specified in section 22.919 of the FCC Rules. A) The transmitter in service has a unique ESN. B) The ESN host component is permanently attached to a main circuit board of the mobile transmitter and the integrity of the unit operating software cannot be altered. The ESN is plated from fraudulent contact and tampering. The ESN is encoded using multiplication by a polynomial and the ESN data programmed in the memory with other information. C) The ESN is factory-set and cannot be altered, transferred, removed or otherwise able to be manipulated. Cellular mobile equipment is specifically designed such that any attempt to remove, tamper with, or change the ESN chip, its logic system, or firmware originally programmed by the manufacturer will render the mobile transmitter inoperative. Sincerely, E.S.Park Senior Research Engineer CDMA Handset Lab LG Electronics Inc. Tel : 82-2-850-3850 Fax : 82-2-850-3861 [email protected] 459-9, Kasan-dong,Kemchun-ku Seoul 153-023, Korea LG Electronics Inc. LGE Tel : 82-2-850-3850 Fax : 82-2-850-3861 [email protected] 459-9, Kasan-dong,Kemchun-ku Seoul 153-023, Korea LG Electronics Inc. LGE May 24. 2004 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Subject : LG Electronics Inc.. FCC ID: BEJLX325 FCC E911 Requirements Per 522.921 Gentlemen: LG Electronics, Inc. hereby certifies that the analog cellular telephone(FCC ID : BEJLX325), using the Automatic A/B Roaming–intelligent Retry method, meets the E911 requirements specified in Section 522.921 of the FCC Rules, This procedure recognizes when a “9-1-1” call is made and, at such time, will override any programming in the mobile unit that determines the handling of a non-911 call and permit the call to he handled by other analog carriers. Should you any have questions or comments concerned the above, please contact the undersined. Sincerely, E.S.Park Senior Research Engineer CDMA Handset Lab LG Electronics Inc. Tel : 82-2-850-3850 Fax : 82-2-850-3861 [email protected] 459-9, Kasan-dong,Kemchun-ku Seoul 153-023, Korea LG Electronics Inc. LGE May 24. 2004 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Subject : LG Electronics Inc.. FCC ID: BEJLX325 User’ s Manual RF Exposure Warning Statement Gentlemen: LG Electronics, Inc. hereby conforms that the attached RF exposure warning page will be ready visible to the user, and will be placed at a prominent location in the front of user’ s manual. If you have any questions or comments concerned the above, please do not hesitate to contact PCTEST Lab. or me at (410)290-6652 Sincerely, E.S.Park Senior Research Engineer CDMA Handset Lab LG Electronics Inc.
LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325
CONFIDENTIAL PROPERTY OF PCTEST FREQUENCY HOPPING SPREAD SPECTRUM (FHSS), FCC RULE PART 15.247 PCTEST LAB TEST REPORT 15.247 FCC CERTIFICATION REPORT Reviewed by: Quality Manager Filename: 15.240524320.BEJ Test Dates: May 25, 2004 EUT Type: Tri-Mode Dual-Band Phone w/ Bluetooth FCC ID: BEJLX325 Page 26 of 32 © 2004 PCTEST Engineering Laboratory, Inc. EXHIBIT B – Labeling Requirements Sample Label & Location New Labeling Requirements Per 2.1074 & 15.19; Docket 95-19 The sample label shown below shall be permanently affixed at a conspicuous location on the device; instruction manual or pamphlet supplied to the user and be readily visible to the purchaser at the time of purchase. However, when the device is so small wherein placement of the label with specified statement is not practical, only the trade name, FCC ID, and the FCC logo must be displayed on the device per Section 15.19 (b)(2). CONFIDENTIAL PROPERTY OF PCTEST FREQUENCY HOPPING SPREAD SPECTRUM (FHSS), FCC RULE PART 15.247 PCTEST LAB TEST REPORT 15.247 FCC CERTIFICATION REPORT Reviewed by: Quality Manager Filename: 15.240524320.BEJ Test Dates: May 25, 2004 EUT Type: Tri-Mode Dual-Band Phone w/ Bluetooth FCC ID: BEJLX325 Page 27 of 32 © 2004 PCTEST Engineering Laboratory, Inc. EXHIBIT B – Labeling Requirements (Cont.) Sample Label & Location FCC ID LABEL
LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325
CONFIDENTIAL PROPERTY OF PCTEST FREQUENCY HOPPING SPREAD SPECTRUM (FHSS), FCC RULE PART 15.247 15.230811393.AMW PCTEST ENGINEERING LABORATORY, INC. 6660 – B Dobbin Road • Columbia, MD 21045 • USA Telephone 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com (email: [email protected]) CERTIFICATE OF COMPLIANCE MANUFACTURER NAME & ADDRESS: DATE & LOCATION OF TESTING: LG ELECTRONICS, INC. Date(s) of Tests: May 25, 2004 2000 Milbrook Drive Test Report S/N: 15.240524320.BEJ Lincolnshire, IL 60069 Test Site: PCTEST Lab, Columbia, MD FCC ID: BEJLX325 APPLICANT: LG Electronics, Inc. SUMMARY: Model No.: LG-LX325 Equipment EUT Type: LG Tri-Mode Dual-Band Phone Model: LG-LX325 w/ Bluetooth Max. Output Power: 0.0008 W Conducted Frequency Range: 2402 – 2480 MHz FCC Classification: FCC Part 15 Frequency Hopping Spread Spectrum Transceiver (DSS) FCC Rule Part(s): Parts 15.247; ANSI C-63.4-2001 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C-63.4-2001. Grant Conditions: Listed output power is conducted. I authorize and attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. CONFIDENTIAL PROPERTY OF PCTEST FREQUENCY HOPPING SPREAD SPECTRUM (FHSS), FCC RULE PART 15.247 Page i © 2004 PCTEST Engineering Laboratory, Inc. TABLE OF CONTENTS ATTESTATION STATEMENTS.....................................................................................................................................................1 1.0 INTRODUCTION.............................................................................................................................................................3 1.1 EVALUATION PROCEDURE.......................................................................................................................................3 1.2 SCOPE........................................................................................................................................................................3 1.3 PCTEST TEST LOCATION...........................................................................................................................................3 2.0 PRODUCT INFORMATION............................................................................................................................................4 2.1 EQUIPMENT DESCRIPTION.......................................................................................................................................4 2.2 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS........................................................................................................4 3.0 DESCRIPTION OF TEST...................................................................................................................................................5 3.1 CONDUCTED EMISSIONS..........................................................................................................................................5 3.2 RADIATED EMISSIONS...............................................................................................................................................6 4.0 ANTENNA REQUIREMENTS...........................................................................................................................................7 5.0 TEST EQUIPMENT CALIBRATION DATA.....................................................................................................................8 6.0 CONCLUSION.................................................................................................................................................................9 EXHIBIT A – TEST RESULTS.......................................................................................................................................................10 SUMMARY..........................................................................................................................................................................10 20DB BANDWIDTH MEASUREMENT (HANDSET)..............................................................................................................11 OUTPUT POWER MEASUREMENT.....................................................................................................................................14 BAND EDGE COMPLIANCE................................................................................................................................................17 CARRIER FREQUENCY SEPARATION..................................................................................................................................18 DWELL TIME.......................................................................................................................................................................19 NUMBER OF HOPPING CHANNELS ..............................................................................................................20 RADIATED HARMONIC MEASUREMENTS (CONT.).....................................................................................................21-25 LINE-CONDUCTED TEST DATA.........................................................................................................................................26 EXHIBIT B – LABELING REQUIREMENTS.............................................................................................................................277 EXHIBIT C – BLOCK DIAGRAM/ SCHEMATICS......................…
Text truncated - open the document above for the full version.
LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325 LGE FCC ID: BEJLX325 EUT Photographs © 2004 PCTEST Lab. Tri-Mode Dual-Band w/ Bluetooth Model: LG-LX325
6660-B Dobbin Road · Columbia, Maryland · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 800.00 µW |

Telematics
Equipment Class
DTS - Digital Transmission SystemNotebook Computer
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterStylus Pen
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzRF Module
Equipment Class
FDS - Part 15 Field Disturbance SensorTelematics
Equipment Class
NII - Unlicensed National Information Infrastructure TX