BEJMG800DGSM Phone with Bluetooth

LG Electronics USA, Inc.

Click to zoom

Application Details

Equipment Class: PCE - PCS Licensed Transmitter held to ear
Date of Grant: Sep 09, 2006
Application Purpose: Original Equipment
Date of Application: Sep 07, 2006
Equipment Note: GSM Phone with Bluetooth
Frequency Range: 824.20000000 - 848.80000000
Company: LG Electronics USA, Inc.
Country: United States

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Please read these simple guidelines. Not following these guidelines may be dangerous or illegal. Further detailed information is given in this manual. CAUTION! • Switch off the phone in any area where required by special regulations. For example, do not use your phone in hospitals or it may affect sensitive medical equipment. • Emergency calls may not be available under all mobile networks. Therefore, you should never depend solely on your mobile phone for emergency calls. • Only use ORIGINAL accessories to avoid damage to your phone. • All radio transmitters carry risks of interference with electronics in close proximity. Minor interference may affect TVs, radios, PCs, etc. • Batteries should be disposed of in accordance with relevant legislation. • Do not dismantle the phone or battery. WARNING! • Mobile Phones must be switched off at all times in aircrafts. • Do not hold the phone in your hand while driving. • Do not use your phone near petrol stations, fuel depots, chemical plants or blasting operations. • For your safety, use ONLY specified ORIGINAL batteries and chargers. • Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone. • Keep the phone in a safe place out of small children’s reach. It includes small parts which, if detached, may cause a choking hazard. For Your Safety For Your Safety 8 ] Do not disassemble this unit. Take it to a qualified service technician when repair work is required. ] Keep away from electrical appliances such as a TV's, radios and personal computers. ] The unit should be kept away from heat sources such as radiators or cookers. ] Do not drop. ] Do not subject this unit to mechanical vibration or shock. ] The coating of the phone may be damaged if covered with wrap or vinyl wrapper. ] Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. There is a risk of this causing a fire. ] Do not subject this unit to excessive smoke or dust. ] Do not keep the phone next to credit cards or transport tickets; it can affect the information on the magnetic strips. ] Do not tap the screen with sharp objects as, it may damage the phone. ] Do not expose the phone to liquid or moisture. ] Use the accessories like an earphone cautiously. ] If you put your phone in a pocket or bag without covering the receptacle of the phone (power plug pin), metallic articles (such as a coin, paperclip or pen) may short-circuit the phone. Always cover the receptacle when not in use. ] Never place your phone in a microwave oven as it will cause the battery to explode. ] Only authorised personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty. ] Do not use the phone if the antenna is damaged. If a damaged antenna contacts skin, it may cause a slight burn. Please contact an LG Authorised Service Centre to replace the damaged antenna. ] The label on the phone contains important information for customer support purposes. Do not remove it. Guidelines for safe and efficient use Guidelines for safe and efficient use 10 ] Use accessories, such as earphones and headsets, with caution. Ensure that cables are tucked away safely and do not touch the antenna unnecessarily. Efficient phone operation To enjoy optimum performance with minimum power consumption please: ] Hold the phone as you speak to any other telephone. While speaking directly into the microphone, angle the antenna in a direction up and over your shoulder. If the antenna is extendable/retractable, it should be extended during a call. ] Do not hold the antenna when the phone is in use. If you hold it, it can affect call quality, it also may cause the phone to operate as a higher power level that needed and shorten talk and standby times. ] If your mobile phone supports infrared, never direct the infrared ray at anyone’s eyes. Electronics devices All mobile phones may get interference, which could affect performance. ] Do not use your mobile phone near medical equipment without requesting permission. Avoid placing the phone over pacemakers, (i.e. in your breast pocket). ] Some hearing aids might be disturbed by mobile phones. ] Minor interference may affect TVs, radios, PCs, etc. ] Do not bend, scratch, or expose to static electricity. Road safety Check the laws and regulations on the use of mobile phones in the areas when you drive. ] Do not use a hand-held phone while driving. ] Give full attention to driving. ] Use a hands-free kit, if available. Guidelines for safe and efficient use 11 Guidelines for safe and efficient use Guidelines for safe and efficient use 12 ] Pull off the road and park before making or answering a call if driving conditions so require. ] RF energy may affect some electronic systems in your motor vehicle such as a car stereo or safety equipment. ] When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is activated, you may be seriously injured. Blasting area Do not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules. Potentially explosive atmospheres ] Do not use the phone at a refueling point. Don’t use near fuel or chemicals. ] Do not transport or store flammable gas, liquid, or explosives in the compartment of your vehicle, which contains your mobile phone and accessories. In aircraft Wireless devices can cause interference in aircraft. ] Turn off your mobile phone before boarding any aircraft. ] Do not use it on the ground without crew permission. Battery information and care ] You do not need to completely discharge the battery before recharging. Unlike other battery systems, there is no memory effect that could compromise the battery’s performance. ] Use only LG batteries and chargers. LG chargers are designed to maximize the battery life. ]…

Text truncated - open the document above for the full version.

Cover Letter(s)

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 September 7, 2006 RE: LG Electronics Inc. FCC ID: BEJMG800D I have a few comments on this Application. Depending on your responses, kindly understand there may be additional comments. 1.) Please provide the oscillator frequency for the Bluetooth module shown in the Block Diagram. 2.) The SAR report in Section 1.1 shows the conducted RF Pout of 33 and 30 dBm respectively for head held configurations. This matches what is shown in 4.3.1 and 4.3.2 of the Test Report. But Section 1.2 of the SAR report shows body-worn RF powers of 36 and 39 dBm, yet there does not to be a corresponding section within the Test Report for these measurements. Are they in a different place within this Report? Please note that band edge and spurious emissions data are also appears to be missing for these higher power body-worn operations. Please note that if the spurious emissions are the same between GSM and GPRS then it must be clearly stated within the filing. I do not find any such statement. 3.) Please refer to the “Body Worn” paragraph in the Manual, page 2. Note that 10.6 inches is NOT 1.5cm. I do not know what this sentence is attempting to say. Please review. William H. Graff President and Director of Engineering mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Cover Letter(s)

September 7. 2006 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 In re : LG Electronics Inc. FCC ID: BEJMG800D POWER OF ATTORNEY To whom it may concern: We the undersigned LG Electronics Inc.hereby authorize ESTECH Co.,Ltd. (EST)of Korea to act on our behalf in all matters relating to all processes required in the FCC Part22, 24&15BC approval and any communication needed with the national authority. Any and all acts carried out by EST on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don ’t hesitate to contact us. Sincerely yours, E.S.Park Chief esearch Engineer Mobile Handset Lab LG Electronics Inc. Tel : 82-2-2033-3850 Fax : 82-2-2033-3855 [email protected] 459-9, Kasan-dong, Kemchun-ku Seoul 153-023, Korea LG Electronics Inc. LGE

ID Label/Location Info

Model No : MG800d FCC ID : BEJMG800D SN : Made In Korea

RF Exposure Info

Ͳ΁΁ͽ ͅʹͲͿ΅͑ͿͲ;Ͷ͑͗͑Ͳ͵͵΃Ͷ ́ ́͑ͫ ͵Ͳ΅Ͳ͑͗͑ͽ΀ʹͲ΅ ͅ΀Ϳ͑΀ͷ͑΅Ͷ ́΅ ͅͿ͸ ͽ͸͑ͶΝΖΔΥΣΠΟΚΔΤ͑ ͅΟΔ͟ ͵ΒΥΖΤ͑ΠΗ͑ΥΖΤΥΚΟΘ͑ͫ͑ͣͧ͑͑ͨͣ͑͢͡͡͠ί͑ͩͩ͠ ΅ΖΤΥ͑ ́ΚΥΖ͑ͫ͑Ͷ ́΅Ͷʹ͹͑ʹΠ͑͟͝ͽΥΕ͑͟ͼΠΣΖΒ ΅ΖΤΥ͑͵ΖΧΚΔΖ͑ͫ͑ ΅ΖΤΥ͑ΣΖΡΠΣΥ͑ΟΠ͑ͫͿΦΞΓΖΣ͑ΠΗ͑ΡΒΘΖ͑ͫ ʹΠΟΥΒΔΥ͑ΡΖΣΤΠΟ͑ͫ΃ΖΤΡΠΟΤΚΓΝΖ͑ΥΖΤΥ͑ͶΟΘΚΟΖΖΣ͑ͫ ͲΡΡΝΚΔΒΟΥ͑΅ΪΡΖ͑ͫ ͷʹʹ͑ʹͽͲ ́ ́ ͅͷ ͅʹͲ΅ ͅ΀Ϳ͑ͫ ͷʹʹ͑΃ΦΝΖ͑΁ΒΣΥ͙Τ͚ ΅ΖΤΥ͑ΣΖΤΦΝΥΤ͑ͫ͑ ͵ΒΥΖ͑ΒΟΕ͑ ́ΚΘΟΒΥΦΣΖΤ͑ͫ͑ ͣͧͩͩ͡͡͠͠ ΃ΖΡΠΣΥ͑΁ΣΖΡΒΣΖΕ͑ͳΪ͑ͫ͑ ͶΟΘΚΟΖΖΣ͑͠ͼ͟͹͟ͼΒΟΘ ͙ ́ΚΘΟΒΥΦΣΖ͚ ;ΒΟΒ ΘΖΣ͑ͶΟΘΚΟΖΖΣ͑͠ͻΒΪ͑ͼΚΞ ͙ ́ΚΘΟΒΥΦΣΖ͚ {GGGaGlz{zhyW]W_TWWX ͷʹʹ͑ ͅ͵͑ͫ͑ͳͶͻ;͸ͩ͡͡͵ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑΁ΒΘΖ͑͑͢ΠΗ͑ͣͪ ͑͑΅ΙΖ͑΅ΖΤΥΖΕ͑ΕΖΧΚΔΖ͑ΔΠΞΡΝΚΖΤ͑ΨΚΥΙ͑ΥΙΖ͑ΣΖ΢ΦΚΣΖΞΖΟΥΤ͑ΚΟ͑ΣΖΤΡΖΔΥ͑ΠΗ͑ΒΝΝ ΡΒΣΒΞΖΥΖΣΤ͑ΤΦΓΛΖΔΥ͑ΥΠ͑ΥΙΖ͑ΥΖΤΥ͑͟΅ΙΖ͑ΥΖΤΥ͑ΣΖΤΦΝΥΤ͑ΒΟΕ͑ΤΥΒΥΖΞΖΟΥΤ͑ΣΖΝΒΥΖ͑ΠΟΝΪ ΥΠ͑ΥΙΖ͑ΚΥΖΞΤ͑ΥΖΤΥΖΕ͑͟΅ΙΖ͑ΥΖΤΥ͑ΣΖΡΠΣΥ͑ΤΙΒΝΝ͑ΟΠΥ͑ΓΖ͑ΣΖΡΣΠΕΦΔΖΕ͑ΣΖΔΖΡΥ͑ΚΟ͑ΗΦΝΝ͝ ΨΚΥΙΠΦΥ͑ΨΣΚΥΥΖΟ͑ΒΡΡΣΠΧΒΝ͑ΠΗ͑ΥΙΖ͑ΝΒΓΠΣΒΥΠΣΪ͟ ͅͶͶͶ͑΁ͦͣͩͣ͢͞͡͡Ή͑͵ΣΒΗΥ͑ͧͥ͟ ΃ΖΔΠΞΞΖΟΕΖΕ͑΁ΣΒΔΥΚΔΖ͑ΗΠΣ͑͵ΖΥΖΣΞΚΟΚΟΘ͑ΥΙΖ͑΁ΖΒΜ͑ ́ΡΒΥΚΒΝ͞ͲΧΖΣΒΘΖ͑ ́ΡΖΔΚΗΚΔ ͲΓΤΠΣΡΥΚΠΟ͑΃ΒΥΖ͙ ́Ͳ΃͚͑ΚΟ͑ΥΙΖ͑͹ΦΞΒΟ͑ͳΠΕΪ͑͵ΦΖ͑ΥΠ͑ΈΚΣΖΝΖΤΤ͑ʹΠΞΞΦΟΚΔΒΥΚΠΟΤ ͵ΖΧΚΔΖ͑ͫ͑ͶΩΡΖΣΚΞΖΟΥΒΝ͑΅ΖΔΙΟΚ΢ΦΖΤ ηͣͪͤͬ͑͟͢͡ͷʹʹ͠΀Ͷ΅͑ͳΦΝΝΖΥΚΟ͑ͧͦ͑ ́ΦΡΡΝΖΞΖΟΥ͑ʹ͙͑ͻΦΝΪ͚͑ͣ͢͡͡ ͽΚΔΖΟΤΖΕ͑ͿΠΟ͞ͳΣΠΒΕΔΒΤΥ͑΅ΣΒΟΤΞΚΥΥΖΣ͑͹ΖΝΕ͑ΥΠ͑ͶΒΣ͙͑΅ͿͶ͚ ͽΚΔΖΟΤΖΕ͑΁ΠΣΥΒΓΝΖ͑΅ΣΒΟΤΞΚΥΥΖΣ͑͹ΖΝΕ͑ΥΠ͑ͶΒΣ͙͑΁ʹͶ͚ ͼ͟͹͟ͼΒΟΘͳΠΟΘ͑͹ΪΠ͑͝͹ΒΟ ʹΖΣΥΚΗΚΔΒΥΚΠΟ ́Ͳ΃͑ʹΠΞΡΝΚΒΔΖ͑΅ΖΤΥ͑΃ΖΡΠΣΥ Ͷ ́΅ ́Ͳ΃ͧͩͣͪ͢͡͡͞͡͡ ͥͦͪͪ͑͞͝ͼΒΤΒΟ͞ΕΠΟΘ͑͝ͼΖΦΞΔΙΦΟ͞ΜΦ͝ ́ΖΠΦΝ͑ͦͤͣͤ͑͢͞͡͝ͼΠΣΖΒ ;ΠΕΖΝΤ͑ͫ͑;͸ͩ͡͡Ε ͷʹʹ͑ ͅ͵͑ͫ͑ͳͶͻ;͸ͩ͡͡͵ ΅Ί΁Ͷ͑ͫ͑͸ ́;͑΁ΙΠΟΖ͑ΨΚΥΙ͑ͳΝΦΖΥΠΠΥΙ͙͑΁ΣΠΥΠΥΪΡΖ͚ ΅ΖΤΥΚΟΘ͑ΙΒΤ͑ΓΖΖΟ ʹΒΣΣΚΖΕ͑ΠΦΥ͑ΚΟ ͲΔΔΠΣΕΒΟΔΖ͑ΨΚΥΙ͑ͫ 1. SUMMARY FOR SAR TET REPORT --------------------------------------------------------------------- ͤ 1.1 Head Configuration ----------------------------------------------------------------------------------------- - ͤ 1.2 Body Worn Configuration --------------------------------------------------------------------------------- - ͤ 1.3 Measurement Uncertainty -------------------------------------------------------------------------------- - ͤ 2. INTRODUCTION ----------------------------------------------------------------------------------------------- - ͥ 3. DESCRIPTION OF THE DEVICE UNDER TEST ------------------------------------------------------ ͦ 3.1 Antenna Description ---------------------------------------------------------------------------------------- ͦ 3.2 Device Description ------------------------------------------------------------------------------------------ - ͦ 3.3 Battery Option ------------------------------------------------------------------------------------------------ ͦ 4. TEST CONDITIONS ------------------------------------------------------------------------------------------- - ͧ 4.1 Ambient Conditions ----------------------------------------------------------------------------------------- ͧ 4.2 RF Characteristics of The Test Site -------------------------------------------------------------------- - ͧ 4.3 Test Signal, Frequencies, And Output Power -------------------------------------------------------- - ͧ 5. DESCRIPTION OF THE TEST EQUIPMENT ----------------------------------------------------------- - ͨ 5.1 Test System Specifications ------------------------------------------------------------------------------- ͨ 5.2 SAR Measurement Setup --------------------------------------------------------------------------------- ͨ 5.3 DASY 4 E-Field Probe System -------------------------------------------------------------------------- - ͩ 5.4 Phantom & Equivalent Tissues -------------------------------------------------------------------------- - ͢͡ 6. DESCRIPTION OF THE TEST PROCEDURE --------------------------------------------------------- - ͣ͢ 6.1 Definition of Reference Point ----------------------------------------------------------------------------- ͣ͢ 6.2 Test Configuration Positions ----------------------------------------------------------------------------- - ͤ͢ 6.3 Scan Procedures -------------------------------------------------------------------------------------------- - ͧ͢ 6.4 SAR Averaging Methods ---------------------------------------------------------------------------------- - ͧ͢ 7. MEASUREMENT UNCERTAINTY ------------------------------------------------------------------------- ͨ͢ 8. SYSTEM VERIFICATION ------------------------------------------------------------------------------------ - ͩ͢ 8.1 Tissue Verification ------------------------------------------------------------------------------------------ - ͩ͢ 8.2 Test System Validation ------------------------------------------------------------------------------------ - ͩ͢ 9. RESULTS -------------------------------------------------------------------------------------------------------- - ͪ͢ 10. REFERENCES ------------------------------------------------------------------------------------------------ - ͣͪ APPENDIX A : Validation Test Data of Tissue APPENDIX B : Validation Test Data APPENDIX C : SAR Test Data APPENDIX D : Calibration Certificates ͑ {GGGaGlz{zhyW]W_TWWX ͷʹʹ͑ ͅ͵͑ͫ͑ͳͶͻ;͸ͩ͡͡͵ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑΁ΒΘΖ͑ͣ͑ΠΗ͑ͣͪ ΅ΒΓΝΖ͑ΠΗ͑ʹΠΟΥΖΟΥΤ ͑͢͟͢͹ΖΒΕ͑ʹΠΟΗΚΘΦΣΒΥΚΠΟ͑ ͑͑͑;ΒΩ͑͟ ́Ͳ΃͑;ΖΒΤΦΣΖΞΖΟΥ ;͹Ϋ ʹΙΕͳΞ ͳΒΥΥΖΣΪ ͩͤͧͧ͟ ͪ͢͡ ͸ ́; ͤͤ ́ΥΒΟΕΒΣΕ ΃ΚΘΙΥ͑΅ΠΦΔΙ ͦͩ͟͢͞͡ ͪͪͩ͢͟͡ ͩ͢͡ ͸ ́; ͤ͡ ́ΥΒΟΕΒΣΕ ΃ΚΘΙΥ͑΅ΠΦΔΙ ͦͤͥ͟͞͡ ͣ͑͢͟ͳΠΕΪ͑ΈΠΣΟ͑ʹΠΟΗΚΘΦΣΒΥΚΠΟ͑ ͑͑͑;ΒΩ͑͟ ́Ͳ΃͑;ΖΒΤΦΣΖΞΖΟΥ ;͹Ϋ ʹΙΕͳΞ ͳΒΥΥΖΣΪ ͩͤͧͧ͟ ͪ͢͡ ͸ ́; ͤͪ ́ΥΒΟΕΒΣΕ ͦ͢͟ΔΞ͑ΌΨ͠Π͑͹ΠΝΤΥΖΣΎ ͩ͢͟͢͞ ͪͪͩ͢͟͡ ͩ͢͡ ͸ ́; ͤͧ ́ΥΒΟΕΒΣΕ ͦ͢͟ΔΞ͑ΌΨ͠Π͑͹ΠΝΤΥΖΣΎ ͩͪͤ͟͞͡ ͤ͑͢͟;ΖΒΤΦΣΖΞΖΟΥ͑ΆΟΔΖΣΥΒΚΟΥΪ {GGGaGlz{zhyW]W_TWWX ͷʹʹ͑ ͅ͵͑ͫ͑ͳͶͻ;͸ͩ͡͡͵ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟Μ Σ͑͑͑͑͑͑͑΁ΒΘΖ͑ͤ͑ΠΗ͑ͣͪ ρ͙͑ͩ͑͢͟͢͡Μ͚ͮ͢ ρ͙͑ͣͧͣ͑͢͟Μ͖ͮͣ͑ͪͦ͑͝ʹ΀Ϳͷ ͅ͵ͶͿʹͶ͑ͽͶ·Ͷͽ͚ ʹΠΞΓΚΟΖ͑ ́ΥΒΟΕΒΣΕ͑ΆΟΔΖΣΥΒΚΟΥΪ ͶΩΥΖΟΕΖΕ͑ ́ΥΒΟΕΒΣΕ͑ΆΟΔΖΣΥΒΚΟΥΪ ͲΟΥΖΟΟΒ ΡΠΤΚΥΚΠΟ ́Ͳ΃ ͙Έ͠ΜΘ͚ ͲΟΥΖΟΟΒ ΡΠΤΚΥΚΠΟ ;ΒΩΚΞΦΞ͑΃ΖΤΦΝΥΤ͑ͷΠΦΟΕ͑͵ΦΣΚΟΘ͑ ́Ͳ΃͑ͶΧΒΝΦΒΥΚΠΟ͑ΦΟΕΖΣ͑ΡΙΠΟΖ͑ΔΒΝΝ͑ΒΟΕ͑ΓΝΦΖΥΠΠΥΙ͑ΗΦΟΔΥΚΠΟ͑ΖΟΒΓΝΖ ͷ΃Ͷ΂ΆͶͿʹΊ ;ΠΕΦΝΒΥΚΠΟ ʹΠΟΕΦΔΥΖΕ͑΁ΠΨΖΣ͙ΕͳΞ͚ ́ΖΡΒΣΒΥΚΠΟ͑ΥΖΤΥ ΡΠΤΚΥΚΠΟ ͵ΖΧΚΔΖ͑ΥΖΤΥ ΡΠΤΚΥΚΠΟ ;ΠΕΦΝΒΥΚΠΟ ʹΠΟΕΦΔΥΖΕ͑΁ΠΨΖΣ͙ΕͳΞ͚ ͑΃Ω͑ͷΣΖ΢ΦΖΟΔΪ ͑;ΒΩ͑͟΃ͷ͑΀ΦΥΡΦΥ͑΁ΠΨΖΣ ͩͧͪͣ͑͟ί͑ͩͪͤͩ͟;͹Ϋ͙͸ ́;͚ͩͦ͑ͪͤͣ͑͢͟͡͝͡ί͑ͪͩͪͩ͑͢͟;͹Ϋ͙΁ʹ ͚́ͪ͢͡͡ ͑͸ ́;͑ͫ͑͸ ́;͙ͩͦ͑ͤͤ͑͡ΕͳΞ͚͑͑͑͑͑͑΁ʹ ͙́ͪ͑͑ͤ͑͢͡͡͡ΕͳΞ͚͑ ͸΁΃ ́͑ͫ͑͸ ́;͙ͩͦ͑ͤͪ͑͡ΕͳΞ͚͑͑͑͑͑͑΁ʹ ͙́ͪ͑͑ͤͧ͑͢͡͡ΕͳΞ͚͑ ́Ͳ΃ ͙Έ͠ΜΘ͚ ͷ΃Ͷ΂…

Text truncated - open the document above for the full version.

Test Report

Product Name Model Name Applicant FCC ID MG800d LG Electronics Inc. BEJMG800D ESTECH CO., LTD Rm. 1015 World Venture Center, 426-5 Gasan-dong, Geumcheon-gu, Seoul, 153-803, Korea. Tel:82-2-867-3201, Fax:82-2-867-3204 ͑͑ESTECH CO., LTD. http://www.estech.co.kr FCC TEST REPORT GSM Phone with Bluetooth Report Number : ESTR0608-0161 of 25 FCC ID : BEJMG800D Company Name Address Product Name Model No.Manufacturer Serial No. Country of origin Issued DateTested Date ͑͑ESTECH CO., LTD. http://www.estech.co.kr Rm. 1015 World Venture Center, 426-5 Gasan-dong, Geumcheon-gu, Seoul, 153-803, Korea. Tel:82-2-867-3201, Fax:82-2-867-3204 ESTECH CO., LTD FCC Test Report Applicant Product Report Number MG800d KOREA LG Electronics Inc. o This is certified that the above mentioned products have been tested for the sample provided by client. o No part of this document may not be duplicated or reproduced by any means without the express written permission of Estech Co., Ltd. Standard FCC PART 24 Subpart E & PART 22 Subpart H Tested by Approved by S.R. Kim/ Engineer (Signature) Jay Kim/ Engineering Manager (Signature) ESTR0608-016 459-9, Kasan-dong, Keumchun-ku, Seoul 153-023, Korea GSM Phone with Bluetooth NONE LG Electronics Inc. Test Result Pass 2006-08-24 2006-07-12 ~ 2006-08-24 Other Report Number : ESTR0608-0162 of 25 FCC ID : BEJMG800D 1. General Information Page 4 2. Laboratory Information Page 5 3. Summary of Test Results Page 5 4. RF Output Power Page 6 5. Occupied Bandwidth Page 8 6. Spurious and Harmonic Emission at Antenna Terminal Page 11 7. Field Strength of Spurious Radiation Page 20 8. Frequency stability Page 23 Contents ͑͑ESTECH CO., LTD. http://www.estech.co.kr Report Number : ESTR0608-0163 of 25 FCC ID : BEJMG800D 1. General Information 1.1 EUT Description Channel Tx :1850.20 ~ 1909.80MHz(PCS1900), 824.2 ~ 848.8MHz(GSM850) PCS1900(512/661/810), GSM850 (128/190/251) GSM Frequency Rx :1930.20 ~ 1989.80MHz(PCS1900), 869.2 ~ 893.8MHz(GSM850) 3.7VDC(3.2 ~ 4.3VDC) Power Rating ͑͑ ESTECH CO., LTD. http://www.estech.co.kr FCC ID BEJMG800D Modulation Type Product Name Model Name GSM Phone with Bluetooth MG800d Report Number : ESTR0608-0164 of 25 FCC ID : BEJMG800D 2. Laboratory Information 3. Summary of Test Results Result PASS PASS PASS PASS ͑͑ ESTECH CO., LTD. http://www.estech.co.kr 58-1, Osan-Ri, GaNam-Myon, YeoJoo-Gun, KyungKi-Do, Korea 97-1, Hoiuk-Ri Majang-Myon, Icheon-city, KyungKi-Do, Korea 2.4 Major Accredited Mark Test Item Accredited by KOLAS(ISO/IEC 17025) Head Office EMC Lab(Ichon) EMC Lab(Yanggi) Standard RF Output Power Occupied Bandwidth PASS 2.1 Laboratory Name 2.2 Location 2.3 Quality System Estech Co., Ltd. Rm. 1015, World Venture Center II, 426-5 Gasan-dong Geumcheon-gu, Seoul, 153-803. Korea. Part 22 & 24 Field Strength of Spurious Radiation Frequency stability Spurious and Harmonic Emission at Antenna Terminal Report Number : ESTR0608-0165 of 25 FCC ID : BEJMG800D 4. RF Output Power 4.1 Test Procedure 4.2 Test Equipments The following test equipments are used during tests Cal. Due Date 2007-01-06 2006-09-02 2006-10-25 2006-09-21 2007-03-31 2007-05-01 4.3.1 Test Results (PCS1900) 5121851.25 6611880.00 8101908.75 30.00 29.96 30.53 29.54 BBHA 9120 D BBHA 9120 D SONOMA INSTRUMENT SCHWARZBECK SCHWARZBECK Ch No.Freq (MHz) 30.0532.70 Peak Power Meter(dBm)Peak Power EIRP(dBm) Pre Amplifier Horn Antenna Horn Antenna Model ESP17 HP HP Manufacturer Rohde & Schwarz 310N ͑͑ ESTECH CO., LTD. http://www.estech.co.kr Signal Generator Power Meter 83620B EPM-442A Equipment Receiver The EUT was placed on a wooden turn table 3 meters from the receive antenna. The receive antenna height and turn table rotation was adjusted for the highest reading on the receive spectrum analyzer. For CDMA signals, a peak detector is used, with RBW = VBW = 3MHz. For AMPS, GSM, and NADC TDMA signals, a peak detector is used, with RBW = VBW = 1MHz, A Horn antenna was substituted in place of the EUT. This Horn antenna was driven by a signal generator and the level of the signal generator was adjusted to obtain the same receive spectrum analyzer reading. This spurious level is recorded. For reading 1GHz, the above procedure is repeated using horn antennas and the difference between the gain of the horn and an isotropic or dipole antenna are taken into consideration. Report Number : ESTR0608-0166 of 25 FCC ID : BEJMG800D Antenna gain(dBi) Cable Loss (dB) 1850.20 102.1710.40 3.4125.7132.7033V 1880.00 101.8310.43 3.3323.4330.5333V 1909.80 99.8310.44 3.3322.4329.5433V 4.3.2 Test Results (GSM850) 128824.70 190835.89 251848.31 Antenna gain(dBd) Cable Loss (dB) 824.70 101.670.99 3.3030.9028.5938.5V 835.89 102.171.31 3.3029.7127.7238.5V 848.31 102.671.62 3.3029.5027.8238.5V FREQ (MHz) Correction Factor (dB) POL (H/V) Limit (dBm) EIRP (dBm) SG Reading (dBm) Receiver Reading (dBuV) ͑͑ ESTECH CO., LTD. http://www.estech.co.kr Ch No.Freq (MHz)Peak Power Meter(dBm)Peak Power ERP(dBm) 32.8728.59 32.9427.72 33.0027.82 ERP (dBm) Limit (dBm) POL (H/V) FREQ (MHz) Receiver Reading (dBuV) Correction Factor (dB) SG Reading (dBm) Report Number : ESTR0608-0167 of 25 FCC ID : BEJMG800D 5. Occupied Bandwidth 5.1 Test Procedure 5.2 Test Equipments The following test equipments are used during tests Cal. Due Date 2007-03-03 2007-03-22 2007-02-06 5.3 Test Results (PCS1900) (GSM850) 5121851.25 8101908.75325.49 6611880.00332.20 ͑͑ ESTECH CO., LTD. http://www.estech.co.kr Dual Directional Coupler EquipmentModel E4407B 778D The transmitter output is connected to the spectrum analyzer. The RBW is set to 1% of the Emission bandwidth. The VBW is set to 3 times the RBW. The sweep time is coupled. Manufacturer 336.07 Spectrum Analyzer 26dB Bandwidth(kHz) Agilent HP ChannelFrequency(MHz) Wireless Communications Test Set AgilentE5515C ChannelFrequency(MHz)26dB Bandwidth(kHz) 128824.70322.47 190835.89316.45 251848.31318.70 Report Number : ESTR0608-0168 of 25 FCC ID : BEJMG800D 5.4 Test Plot PCS1900 26dB Channel Bandwidith(512) 26dB Channel Bandwidith(661) 2…

Text truncated - open the document above for the full version.

Test Setup Photos

Text truncated - open the document above for the full version.

Contact Information

Applicant

David Kim(Team leader, LGEUS NA Policy & Regulatory Affairs)

[email protected]201-470-2696Fax: 201-816-2003

Technical Contact

ESTechJay Kim

[email protected]+82 2 867 3201

Rm. 1015 World Venture Center II · Seoul · South Korea

Test Firm

ESTECH Co., Ltd.Yang Jinmo

[email protected]82-31-631-8037Fax: 82-31-631-8039

Technical Specifications

#	Rule Parts	Frequency Range	Power Output	Emission	Tolerance
2	22H	824.2 MHz - 848.8 MHz	723.00 mW	300KGXW	2.5 ppm

Confidentiality

Long Term

Grant Notes

This device contains GSM functions that are not operational in U.S. Territories. This filing is only applicable for 850 and 1900 MHz Licensed operations. Power Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15mm separation between the device and the user�s body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Part 22 Head: 0.52W/kg; Body-worn: 1.18W/kg; Part 24 Head: 0.53W/kg; Body-worn: 0.89W/kg