BEJMR24GAMagic Remote

Magic Remote User Information Model Name : MR24GA Table of Contents 1. Overview and specification of the remote control (1) Overview (2) Specification 2. Precautions 3. Customer Support English 1. Overview and Specifications for the Remote Control (1) Overview - Instructions for using the Premium Magic Remote control are in the TV manual. this remote uses RF(Radio Frequency) instead of IR (InfaRedlight). this remote will operate within 10m of the tv and does not require it be pointed at the tv.(voice recognition support) (2) Specifications "This device can be operated in at least one Member State without infringin g app licable requirements on the use of radio spectrum" CategoriesDetails Model No.MR24GA Range of frequency 2.402 GHz ~ 2.480 GHz Output Power(Max.)8dBm (EIRP) Channel40 channels Power source AA 1.5 V, 2 alkaline batteries are used Operational temperature range 0 °C~ 40 °C 2. Precautions (1) After replacement of the battery, use the remote control following pairing in accordance with user manual. (2) If the unit does not operate after replacement of battery, reattempt pairing in accordance with the user manual. (3) If the remote controller is not being used for prolonged period of time, it is recommended you remove the battery from the unit. (4) Do not dismantle or exert heat to the battery. (5) Do not drop battery or exert extreme impact that may even cause the case to be damaged. (6) Do not immerse the battery in water. (7) There is danger of explosion if a the battery is inserted reversely. (8) Properly dispose of used batteries. (9) Open the battery cover to find the label. 3. Customer Support Refer to the contact number for services provided in the TV Manual. Federal Communications Commission(FCC) Statement Federal Communications Commission(FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment and For indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance. Industry Canada Statement [English] Industry Canada Statement (For Canada) This device complies with Industry Canada’s licence-exempt RSS Stadard(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device. Avis d'industriecanada Cetappareilestconformeaux normesCNR d’IndustrieCanada applicables aux dispositifs exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1)l’appareil ne doit pas produire de brouillage; 2)l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. IC Radiation Exposure Statement (For Canada) This equipment complies with IC radiation exposure limits set forth for an Uncontrolled environment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. [French] Avis d'IndustrieCanada (Pour le Canada) Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1)l’appareil ne doit pas produire de brouillage; 2)l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Avis d’Industrie Canada sur l’exposition aux rayonnements Avis d'industriecanada (Pour le Canada) Cet appareil est conforme aux limites d’exposition aux rayonnements d’Industrie Canada pour un environnement non contrôlé. REMARQUE : LE FABRICANT N’EST PAS RESPONSABLE DES INTERFÉRENCES RADIOÉLECTRIQ…

Text truncated - open the document above for the full version.

Attestation Letter (Section 2.911 (d)(5)(i)(ii) and 2.911(d)(7)) Date: 6/29/2023 FCC ID: BEJMR24GA, BEJMR24GN To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046, USA We, LG Electronics Inc., as requested by FCC, are declaring that both requirements of Section 2.911 (d)(5)(i)(ii) and 2.911(d)(7) are being satisfied likes below to the FCC requirements to protect the nation`s networks and supply chains from equipment (“covered” equipment) according to FCC 22-84 and KDB 986446 D01. 1. Section 2.911 (d)(5)(i)(ii)) 2.911 (d)(5)(i) We certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2.911 (d)(5)(ii) And, we certifies that one of following, ☒ 1. We are not identified on the Covered List and are not an affiliate or subsidiary of an entity identified on the Covered List. ☐ 2. We are identified on the Covered List as an entity producing “covered” equipment. But, we can be authorized since the reason as explained below. ☐ 3. We are an affiliate or subsidiary of an entity identified on the Covered List. But, we can be authorized since the reason as explained below. *Only one of paragraphs 1, 2 or 3 should be checked, if checked on paragraphs 2 or 3, the reason why it does not include the “covered” equipment. 2. Section 2.911(d)(7) We, as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. We will maintain the agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. And we have the responsibility to inform the FCC whenever the agent information changes. -. US Contact Name: Heejae Cho -. US Address: LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs,New Jersey 07632, United States -. Email: [email protected] -. FRN: 0023476120 We are our own U.S agent for service of process. Sincerely yours, Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs Company Name: LG Electronics USA

Date: To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To whom it may concern: Subject : FCC Agent Authorization Letter for FCC ID :BEJMR24GA This authorization is valid until further written notice from the applicant. Sincerely, Signed by: (Name) Heejae Cho (Title) Director, Regulatory and Environmental Affairs [email protected] 201-470-2696 (Address) June 28, 2023 LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey 07632, United States We, the undersigned, hereby authorize HCT CO., LTD. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT CO., LTD. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). We recognize that we are still responsible for the terms and conditions outlined in the HCT America Client Services Agreement. _________________________ (Email Address) (Phone number)

Date: To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT: Request for Confidentiality for FCC ID: BEJMR24GA We hereby request confidential treatment of the information accompanying this application as outlined below: Exhibit 1 2 3 4 5 6 7 8 Sincerely, Signed by: (Name) Heejae Cho (Title) Director, Regulatory and Environmental Affairs (Email Address) [email protected] (Phone number) 201-470-2696 (Address) LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey 07632, United States June 28, 2023 Description Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. LONG-TERM CONFIDENTIAL SHORT-TERM CONFIDENTIAL (180 DAYS) User’s Manual Test-Setup Photos Internal Photos External Photos Schematics Parts List LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST

FCC ID: BEJMR24GA, IC: 2703H-MR24GA HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 4 EXTERNAL PHOTOGRAPHS FCC ID: BEJMR24GA, IC: 2703H-MR24GA HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 4 ■ EXTERNAL PHOTO FCC ID: BEJMR24GA, IC: 2703H-MR24GA HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 4 FCC ID: BEJMR24GA, IC: 2703H-MR24GA HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 4

MR24GA Label size, position MR24GA Label size SIZE : 15.5 X 30.5 MR24GA Label position Label position IC: 2703H-MR24GA FCC ID: BEJMR24GA

FCC ID: BEJMR24GA, IC: 2703H-MR24GA HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 4 INTERNAL PHOTOGRAPHS FCC ID: BEJMR24GA, IC: 2703H-MR24GA HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 4 ■ INTERNAL PHOTO FCC ID: BEJMR24GA, IC: 2703H-MR24GA HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 4 ■ INTERNAL PHOTO FCC ID: BEJMR24GA, IC: 2703H-MR24GA HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 4 ■ INTERNAL PHOTO(Antenna)

HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 645 6300 Fax. +82 31 645 6401 F-TP22-03 (Rev. 04) Page 2 of 18 TE S T R E P O R T E M I T e s t f o r F C C S D o C REPORT NO. HCT-EM-2306-FC006 DATE OF ISSUE June 28, 2023 FCC ID. BEJMR24GA Applicant LG Electronics Inc. 222, LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, 17709, Republic of Korea Product Name Model Name Magic Remote MR24GA Date of Test June 20, 2023 to June 21, 2023 Test Standard Used FCC CFR 47 PART 15 Subpart B Class B ANSI C63.4-2014 Test Results Refer to the present document Manufacturer LG Electronics Inc. The result shown in this test report refer only to the sample(s) tested unless otherwise stated. This test results were applied only to the test methods required by the standard. F-TP22-03 (Rev. 04) Page 3 of 18 Report No. HCT-EM-2306-FC006 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 June 28, 2023 Initial Release The above Test Report is the accredited test result by (KS Q) ISO/IEC 17025 and KOLAS(Korea Laboratory Accreditation Scheme), which signed the ILAC-MRA. (KOLAS Accreditation No. KT197) If this report is required to confirmation of authenticity, please contact to www.hct.co.kr F-TP22-03 (Rev. 04) Page 4 of 18 Report No. HCT-EM-2306-FC006 CONTENTS 1. GENERAL INFORMATION 5 1.1 Description of EUT 5 1.2 Tested System Details 5 1.3 Cable Description 6 1.4 Noise Suppression Parts on Cable (I/O Cable) 6 1.5 Test Facility 7 1.6 Calibration of Measuring Instrument 7 1.7 Measurement Uncertainty 7 2. DESCRIPTION OF TESTING 8 2.1 Measurement of Conducted Emission 8 2.2 Measurement of Radiated Emission 9 2.3 Configuration of Tested System 10 3. OPERATION OF THE EUT 11 4. MEASURING INSTRUMENTS 12 5. EMISSION TEST SUMMARY 13 5.1 Conducted Emission (Not Applicable) 13 5.2 Radiated Emission Below 1 ㎓ 14 5.3 Radiated Emission Above 1 ㎓ 16 6. APPENDIX A. TEST SETUP PHOTO 18 F-TP22-03 (Rev. 04) Page 5 of 18 Report No. HCT-EM-2306-FC006 1. GENERAL INFORMATION 1.1 Description of EUT FCC ID. BEJMR24GA Product Name Magic Remote Model Name MR24GA Frequency Range 2 402 ㎒ to 2 480 ㎒ (Bluetooth) Operating Voltage DC 3 V (Rated) Manufacturer LG Electronics Inc. NOTE. This product is a wireless remote controller, it does not have a port to connect peripherals and has a built-in battery. 1.2 Tested System Details All equipment descriptions used in the tested system (including inserted cards) are: Device Type Model Name Serial Number Manufacturer Magic Remote MR24GA - LG Electronics Inc. Bluetooth Dongle - - LG Electronics Inc. Notebook PC HP ProBook 6560b 5CB2095MKD HP Notebook PC Adapter Series PPP009L-E - Lite-ON Technology Co., Ltd. F-TP22-03 (Rev. 04) Page 6 of 18 Report No. HCT-EM-2306-FC006 1.3 Cable Description Product Name Port Power Cord Shielded (Y/N) I/O Cable Shielded (Y/N) Length (m) EUT N/A N/A N/A N/A “(D)” data cable and “(P)” power cable. 1.4 Noise Suppression Parts on Cable (I/O Cable) Product Name Port Ferrite Bead (Y/N) Location Metal Hood (Y/N) Location EUT N/A N/A N/A N/A N/A F-TP22-03 (Rev. 04) Page 7 of 18 Report No. HCT-EM-2306-FC006 1.5 Test Facility Test site is located at 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea. Those measurement facilities are constructed in conformance with the requirements of ANSI C63.4-2014. The Normalized site attenuations (30 ㎒ to 1 ㎓) and Site validation (1 ㎓ to 18 ㎓) were performed in accordance with the standard in ANSI C63.4-2014 and ANSI C63.4a-2017 Our laboratories are accredited and designated in accordance with the provisions of Radio Waves ACT and International Standard ISO/IEC 17025:2017. (National Radio Research Agency, CABID No. KR0032) 1.6 Calibration of Measuring Instrument The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in ac cordance with the manufacturers recommendations for utilizing calibration equipment, which is traceable to recognized national standards.Espectially, all antenna for measurement is calibrated in accordance with the requirements of C63.5:2017 1.7 Measurement Uncertainty The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.4-2014. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95 % level of confidence. The measurement data shown herein meets or exceeds the U CISPR measurement uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine compliance. Parameter Test Site Expanded Uncertainty Radiated Emission (30 ㎒ to 1 ㎓) 3 m Semi Anechoic Chamber #1 5.9 dB Radiated Emission (1 ㎓ to 18 ㎓) 3 m Semi Anechoic Chamber #1 4.8 dB F-TP22-03 (Rev. 04) Page 8 of 18 Report No. HCT-EM-2306-FC006 2. DESCRIPTION OF TESTING 2.1 Measurement of Conducted Emission The test procedure was in accordance with ANSI C63.4-2014, Clause 7.3 a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). If the EUT is connected to the PC through USB, the AC power-line adapter of the PC is directly connected to a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both conducted lines are measured in Quasi-Peak and Average mode, including the worst-case data points for each tested configuration. c. The frequency range from 150 ㎑ to 30 ㎒ was searched. Conducted Emission Limits Frequency (㎒) Resolution Bandwidth (㎑) Class A Class B Quasi-Peak (㏈㎶) Average (㏈㎶) Quasi-Peak (㏈㎶) Average (㏈㎶) 0.15 to 0.5 9 79 66 66 to 56* 56 to 46* 0.5 to 5 9 73 60 56 46 5 to 30 9 73 60 60 50 NOTE. Decreases with the logarithm of the frequency. F-TP22-03 (Rev. 04) Page …

Text truncated - open the document above for the full version.

File No. HCT-EM-2306-FC006-P Page 1 of 4 HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 645 6300 Fax. +82 31 645 6401 A p p e n d i x A : Te s t S e t u p P h o t o Model Name. MR24GA File No. HCT-EM-2306-FC006-P REVISION HISTORY The revision history for this document is shown in table. Revision No. Date of Issue Description 0 June 28, 2023 Initial Release File No. HCT-EM-2306-FC006-P Page 2 of 4 Model Name. MR24GA A.1 Conducted Emission Not Applicable File No. HCT-EM-2306-FC006-P Page 3 of 4 Model Name. MR24GA A.2 Radiated Emission below 1 ㎓ File No. HCT-EM-2306-FC006-P Page 4 of 4 Model Name. MR24GA A.3 Radiated Emission above 1 ㎓ End of report