BEJMR400DMagic Remote Dongle

MAGICREMOTEDONGLE USERINFORMATION MODELNAME: AN-MR400D 목차 Korean 한국어 1. Magic Remote dongle 의개요및제원 (1) 개요 (2) 제원 의사항2. 주의사항 3. 고객지원 4. Attention complaint of nations 1. Magic Remote dongle의개요및제원 (1) 개요 -이 수신기는 사용자가 댁내에서 리모콘을 무선 마우스처럼 사용하여 TV를제어할수있는제품으로써기존적외선리모콘이육안상에위치한TV를제어할수있는제품으로써, 기존적외선리모콘이육안상에위치한 제품을 제어했던 반면에 댁내10 m 이내에서 방향에 상관없이 제어할 수 2.4 GHz대RF 수신기이다. -RF동글케이블잭을RF동글에연결한-. RF 동글케이블잭을RF 동글에연결한 다음, TV에 케이블 잭을 연결하세요 (2) 제원 구분내 용 모델명 AN-MR400D 주파수 대역 2.4000 GHz ~ 2.4835 GHz 채널79 채널 송신출력 10 dBm 수신감도 -86 dBm 크기폭53 x두께13 x 길이53 (공차±1 mm) 무게18 g ±5 g 전원DC 5 V, USB 전원 사용 동작 온도 0 °C~ 60 °C 2. 주의사항 (1) 리모컨의 밧데리를 교체한 후에는 리모콘 사용법에 따라 페어링 후에 사용한다. (2) 리모컨의 밧데리를 교체 후 동작하지 않는다면, 밧데리를 제거 후 사용법에 따라 페어링을 재시도한다. (3) 제품을 분해하거나, 열을 가해서는 안된다. (4) 케이스가 손상될 정도로 극심한 충격을 줘서는 안된다. (5) 제품을 물에 넣어서는 안된다. 3. 고객지원 TV 매뉴얼의 서비스 연락처를 참조하세요. [KCC 인증 마크 및 인증번호] 인증 받은 자의 상호:엘지전자(주) 인증번호: KCC-LGE-CMM-MR400D 제년월제조년월: 2012 . . 제조자/제조국가:엘지전자(주)/대한민국 기자재의 명칭/모델명:특정소출력 무선기기 (무선데이터 통신 시스템용 무선기기)/AN-MR400D Table of Contents English 1. Overview and specification of the Magic Remote dongle (1) Overview (2) Specification 22. Precautions 3. Customer Support 4. Attention complaint of nations 1. Overview and Specifications for the Magic Remote dongle (1) Overview - This RF Receiver is a product that can control the TV by using it as ssapoduaaoobyusgas if it were a wireless mouse in user’s residence. While the existing infrared remote controllers were used for the products that are within the sight of the user, this product is a RF receiver with frequency range of 2.4 GHz that can control appliances located within distance of 10 m regardless of the direction within user’s residenceuser s residence. -. Connect the Magic Remote Dongle Cable plug on the Magic Remote Dongle to a USB1 jack on the TV. (2) Specifications CategoriesDetails Model NoANMR400DModel No.AN-MR400D Range of frequency2.400 GHz ~ 2.4835 GHz Channel79 channels Transmission output10 dBm Reception sensitivity-86 dBm DimensionsWidth 53 x Thickness 13 x Length 53 (tolerance of ±1 mm) Weight 18 g ±5 g gg Power sourceDC 5 V, USB power are used Operational temperature range 0 °C~ 60 °C 2. Precautions (1) After replacement of the battery, use the remote controller following pairing in accordance with user manual. (2) If the unit does not operate after replacement of battery take the battery(2) If the unit does not operate after replacement of battery, take the battery out and reattempt pairing in accordance with the user manual. (3) Do not dismantle or exert heat to the product. (4) Do not exert extreme impact that may even cause the case to be damaged. (5) Do not immerse the product in water. 3. Customer Support Refer to the contact number for services provided in the TV Manual. Inhalt German Deutsch 1. Beschreibung und technische Spezifikation der RF Empfänger (1) Beschreibung (2) Technische Spezifikation 2h2. Warnhinweise 3. Kundendienst 4. Attention complaint of nations 1. Beschreibung und technische Spezifikation der RF Empfänger (1) Beschreibung Die Empfänger kann wie eine schnurlose Maus verwendet werden um den Heimfernseher zu bedienen. Im Gegensatz zu herkömmlichen Fernbedienungen mit denen der ernseher nur aus kurzer Distanz bedient werden kann, kann man mit dieser RF Empfänger mit ihrem 2.4 GHz Frequenzbereich den Fernseher von irgendeiner beliebigen Richtung aus in Ihrem Haus und bei einem Abstand von bis zu 10 m bedienen. - Schließen Sie den Dongle an der entsprechenden Anschlussbuchse am TV-Gerät an. (2) Technische Spezifikation KlassifikationInhaltKlassifikationInhalt ModellAN-MR400D Frequenzbereich2.400 GHz ~ 2.4835 GHz KanalKanal 79 Sendeleistung10 dBm Empfängerleistung -86 dBm GrößeWeite 53 x Dicke 13 x Länge53 (Abweichung±1 mm) Gewicht 18 g ±5 g LeistungsquelleDC 5 V, USB Macht Arbeitstemperatur 0 °C~ 60 °C 2. Warnhinweise (1) Nachdem Sie die Batterien ausgetauscht haben, verwenden Sie die Fernbedienung der Beschreibung folgend. (2) Wenn die Fernbedienung nach dem Batterienwechsel nicht funktioniert(2) Wenn die Fernbedienung nach dem Batterienwechsel nicht funktioniert, nehmen Sie die Batterien nocheinmal heraus und setzen Sie sie ordnungsgemäß ein. (3) Nicht zerlegen oder ausüben Wärme an das Produkt. (4) Üben Sie keinen extremen Auswirkungen, die sogar dazu führen, kann der Fall beschädigt werdenFall beschädigt werden. (5) Tauchen Sie das Produkt in Wasser. 3. Kundendienst Die Kundendienst Rufnummer finden Sie in der Bedienungsanleitung desDie Kundendienst Rufnummer finden Sie in der Bedienungsanleitung des Fernsehers. Table des matières French Français 1. Aperçu et spécifications de la Récepteur RF (1) Aperçu (2) Spécifications 2é2. Précautions 3. Support client 4. Attention complaint of nations 1. Aperçu et spécifications de la Récepteur RF (1) Aperçu - Cette Récepteur RF est un produit permettant de contrôler la télévision en l’utilisant comme une souris sans fil à la maison ; si le produit actuel aux ;p rayons ultra rouges contrôle les appareils situés à portée du regard, ce produit est une Récepteur RF 2.4 GHz permettant le contrôle dans tous les sens, sur une distance de 10 mètres à l’intérieur de la maison. - Branchez un câble jack sur la prise du jp dongle d’une part et sur la prise jack du téléviseur d’autre part. (2) Spécifications CatégorieContenu Nom de modèle AN-MR400D Zone de fréquences 2.400 GHz ~ 2.4835 GHz Chaîne79 chaînes Puissance pour l’envoi10 dBm Réceptivité-86 dBm Dimensions (mm)53 (L) x 13 (L) x 53 (E) (tolérances ±1) Poids (g) 18 ±5 SecteurDC 5 V, USB puissance Température pour le fonctionnement 0 °C à 60 °C 2. Précautions (1) Après avoir changé de batterie, procédez à l’appareillement suivant le mode d’emploi de la télécommande avant d’utiliser cette dernière. (2) Si la télécommande ne fonctionne pas même après avoir changé de(2) Si la télécommande ne fonctionne pas même après avoir changé de batterie, enlevez cette dernière, puis essayez de nouveau l’appareillement suivant le mode d’emploi. (3) Ne pas démonter ni exercer de chale…

Text truncated - open the document above for the full version.

LG Electronics USA. 1000 Sylvan Avenue Englewood Cliffs, New Jersey, United States Date: October 10, 2012 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards;

LG Electronics USA. 1000 Sylvan Avenue Englewood Cliffs, New Jersey, United States Date: October 10, 2012 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA RE: Request of Confidentiality for FCCID: BEJMR400D To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Electronics USA. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG Electronics USA. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description File name PERMANENT 1 Block Diagram Block Diagram_BEJMR400D.pdf 2 Schematics Schematic_BEJMR400D.pdf 3 Part Lists Part List_BEJMR400D.pdf 4 Operational Description Operational Description_BEJMR400D.pdf SHORT-TERM 5 External Photos Ext Photo_BEJMR400D.pdf 6 Internal Photos Int Photo_BEJMR400D.pdf 7 Test-Setup Photos Test Photo_BEJMR400D.pdf 8 User Manual User Manual_BEJMR400D.pdf Note: The pictures on the label location do not require any long term or short term confidentiality. The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Jacob Cho Director, Standards & Compliance

LG Electronics USA. 1000 Sylvan Avenue Englewood Cliffs, New Jersey, United States Date: October 10, 2012 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA LETTER OF AUTHORIZATION We, the undersigned, hereby authorize Harvey Sung of Digital EMC Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: BEJMR400D including signing of all documents relating to these matters. Any and all acts carried out by Harvey Sung of Digital EMC Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from LG Electronics USA. Sincerely, Jacob Cho Director, Standards & Compliance

FCCID: BEJMR400D Copyright Ⓒ 2012, Digital EMC Co., Ltd. View 1 FCCID: BEJMR400D Copyright Ⓒ 2012, Digital EMC Co., Ltd. View 2 FCCID: BEJMR400D Copyright Ⓒ 2012, Digital EMC Co., Ltd. View 3

FCC ID: BEJMR400D Copyright Ⓒ 2012, Digital EMC Co., Ltd. FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label. - The device is so small that it is not practicable to place the statement specified under 15.19 statement request, the information required by this paragraph shall be placed in a prominent location in the user's manual.

FCCID: BEJMR400D Copyright Ⓒ 2012, Digital EMC Co., Ltd. Page1 / 3 View 1 FCCID: BEJMR400D Copyright Ⓒ 2012, Digital EMC Co., Ltd. Page2 / 3 View 2 FCCID: BEJMR400D Copyright Ⓒ 2012, Digital EMC Co., Ltd. Page3 / 3 View 3

TRF-EM-003(00)081218 Copyright ○ c 2012, DIGITAL EMC CO., LTD. Page 2 of 27 FCC ID: BEJMR400D Report No.: DREFCC1210-1454 To t a l 2 7 pages CONTENTS 1. General Remarks ........................................................................................................................ 3 2. Test Laboratory ........................................................................................................................... 3 3. General Information of EUT ....................................................................................................... 4 4. Test Summary ............................................................................................................................. 5 4.1 Applied standards and test results ........................................................................................... 5 4.2 Test environment and conditions ............................................................................................. 5 4.3 Test result Summary ................................................................................................................ 5 5. Test Set-up and operation mode ............................................................................................... 6 5.1 Principle of Configuration Selection ......................................................................................... 6 5.2 Test Operation Mode ............................................................................................................... 6 5.3 Support Equipment Used ......................................................................................................... 6 6. Test Results : Emission .............................................................................................................. 7 6.1 Conducted Disturbance ........................................................................................................... 7 6.2 Radiated Disturbance ............................................................................................................ 12 Appendix 1 ..................................................................................................................................... 26 List of Test and Measurement Instruments ............................................................................. 26 TRF-EM-003(00)081218 Copyright ○ c 2012, DIGITAL EMC CO., LTD. Page 3 of 27 FCC ID: BEJMR400D Report No.: DREFCC1210-1454 To t a l 2 7 pages 1. General Remarks This report contains the result of tests performed by: DIGITAL EMC CO., LTD. Address : 683-3, Yubang-Dong, Cheoin-Gu, Yongin-Si, Gyeonggi-Do, 449-080, Korea http://www.digitalemc.com Tel: +82-31-321-2664 Fax: +82-31-321-1664 2. Test Laboratory Digital EMC Co., Ltd. has been accredited / filed / authorized by the agencies listed in the following table; Certificate Nation Agency Code Mark Accreditation Korea KOLAS 393 ISO/IEC 17025 Site Filing USA FCC 101842 678747 Test Facility list & NSA Data Canada IC 5740A-1 5740A-2 Test Facility list & NSA Data Japan VCCI C-1427 R-1364, R-3385 T-1442, G-338 Test Facility list & NSA Data Certification Korea KC KR0034 Test Facility list & NSA Data Germany TUV ROK1124C ISO/IEC 17025 Quality control in the testing laboratory is implemented as per ISO/IEC 17025 which is the “General requirements for the competent of calibration and testing laboratory”. TRF-EM-003(00)081218 Copyright ○ c 2012, DIGITAL EMC CO., LTD. Page 4 of 27 FCC ID: BEJMR400D Report No.: DREFCC1210-1454 To t a l 2 7 pages 3. General Information of EUT Model No. AN-MR400D EUT Type Magic Remote Dongle Serial No NONE FCC ID BEJMR400D Type of Sample Tested Pre-Production Clock Frequency 20 MHz Rating DC 5V (USB POWER) Supplied Power for Test AC 120 V, 60 Hz Applicant LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs, New Jersey, United States. Manufacturer LG Electronics Inc. 19-1, Cheongho-ri, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, 451-713, Korea TRF-EM-003(00)081218 Copyright ○ c 2012, DIGITAL EMC CO., LTD. Page 5 of 27 FCC ID: BEJMR400D Report No.: DREFCC1210-1454 To t a l 2 7 pages 4. Test Summary 4.1 Applied standards and test results Test Items Applied Standards Results Conducted Disturbance ANSI C63.4:2003 C Radiated Disturbance ANSI C63.4:2003 C C=Comply N/C=Not Comply N/T=Not Tested N/A=Not Applicable The data in this test report are traceable to the national or international standards. 4.2 Test environment and conditions Test Items Test date (MM-DD) Temp ()°C Humidity (% R.H.) Conducted Disturbance 10-16 23 45 Radiated Disturbance 10-18 18 36 4.3 Test result Summary (1) Conducted Emission(IDLE MODE) Frequency [MHz] Phase Result [dBμV] Detector Limit [dBμV] Margin [dB] 0.16144 N 55.7 Quasi-Peak 65.4 9.7 (2) Radiated Emission(TRAFFIC MODE) Frequency [MHz] Pol. Result [dB(μV/m)] Detector Limit [dB(μV/m)] Margin [dB] 376.520 H 36.6 Quasi-Peak 46.0 9.4 TRF-EM-003(00)081218 Copyright ○ c 2012, DIGITAL EMC CO., LTD. Page 6 of 27 FCC ID: BEJMR400D Report No.: DREFCC1210-1454 To t a l 2 7 pages 5. Test Set-up and operation mode 5.1 Principle of Configuration Selection Emission : The equipment under test (EUT) was configured to measure its highest possible radiation level. The test modes were adapted accordingly in reference to the instructions for use. 5.2 Test Operation Mode - TRAFFIC MODE : BT_CH 0_Traffic Operating - IDLE MODE : BT Idle Mode 5.3 Support Equipment Used Unit Model No. Serial No. Manufacturer CABLE BackshellFCC ID Connect type Length (m) ferrite core shield NOTE PC X140-01 009QTAF022136 LG DC Power USB USB 1.6 1.6 0.6 Not use Not use Not use Non-shield Shield Shield PlasticDOC ADAPTER ADP-40PH AD N/A DELTA ELECTRONICS (JIANG SU), LTD. Power DC Power 1.6 1.6 Not use Not use Non-shield Non-shield PlasticVER PRINTER SRP-770 SRP77008060035 BIXOLON Power USB 1.6 1.6 Not use Not use Non-shield Shield PlasticDOC TRF-EM-003(00)081218 Copyright ○ c 2012, DIGITAL EMC CO., LTD. Page 7 of 27 FCC ID: BEJMR400D Report No.: DREF…

Text truncated - open the document above for the full version.

FCC ID: BEJMR400D Copyright © 2012, DIGITAL EMC Co., Ltd. Conducted Emission FCC ID: BEJMR400D Copyright © 2012, DIGITAL EMC Co., Ltd. Radiated Emission < 30 MHz ~ 1 GHz > FCC ID: BEJMR400D Copyright © 2012, DIGITAL EMC Co., Ltd. Radiated Emission < (1 ~ 6) GHz >