BEJNT-14T90SNotebook Computer

Covered Equipment Certification Attestation Letter 9/5/2023 Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTN.: Reviewing Engineer FCC ID: BEJNT-14T90S LG Electronics USA, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. LG Electronics USA, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Hee Jae Cho Title: Director, Regulatory and Environmental Affairs Company Name: LG Electronics USA, Inc. Date: 9/5/2023

U.S. Agent Designation for Service of Process - Certification Attestation Letter 9/5/2023 Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTN.: Reviewing Engineer FCC ID: BEJNT-14T90S Per section 2.911(d)(7) of the FCC rules, LG Electronics USA, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: LG Electronics USA, Inc. Physical U.S. Company Address: 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey 07632, United States Agent name: Hee Jae Cho Agent Email Address: [email protected] FRN: 0017130477 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Hee Jae Cho Printed name: Click here to enter text. Title: Director, Regulatory and Environmental Affairs Title: Click here to enter text. Company Name: LG Electronics USA, Inc. Company Name: Click here to enter text. Date: 9/5/2023 Date: Click here to enter a date. * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.

Declaration of Authorization We Name: LG Electronics USA, Inc. Address: 111 Sylvan Avenue, North Building, Englewood Cliffs, City: New Jersey 07632 Country: United States Declare that: Name Representative of agent: Mr. Kent Liu Agent Company name: BTL Inc. Address: 4F,No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist.114, City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): FCC ID: BEJNT-14T90S Product description: Notebook Computer Type designation: 14T90S, 14TD90S, 14TG90S, 14TB90S, 14TW90S, 14TN90S, 14T90S* (* can be 0 to 9 or A to Z or blank denoting buyer request) Trademark: LG Validity/ expiry date: From 9/5/2023 to 9/4/2024 on our behalf. Date: 9/5/2023 Name: Hee Jae Cho Function: Director, Regulatory and Environmental Affairs Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

To: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands Subject: Request for confidentiality FCC ID: BEJNT-14T90S Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photo Justification: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Date: 9/5/2023 Name and signature of applicant: Hee Jae Cho Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Model Declaration Letter We, the undersigning company Company Name: LG Electronics USA, Inc. Address: 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey 07632, United States Hereby confirm that the following products: Product description: Notebook Computer Type designation: 14T90S, 14TD90S, 14TG90S, 14TB90S, 14TW90S, 14TN90S, 14T90S* (* can be 0 to 9 or A to Z or blank denoting buyer request) Trademark: LG That All versions of the Model: 14T90S, 14TD90S, 14TG90S, 14TB90S, 14TW90S, 14TN90S, 14T90S* (* can be 0 to 9 or A to Z or blank denoting buyer request) are electrically equal except the following difference: 14T90S, 14TD90S, 14TG90S, 14TB90S, 14TW90S, 14TN90S, 14T90S* (* can be 0 to 9 or A t o Z or blank denoting buyer request) series only differ in model name for the marketing purpose, only different model designations on the marking plate for different markets. No RF concern. Date: 9/5/2023 Name: Hee Jae Cho Function: Director, Regulatory and Environmental Affairs Signature:

Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 1 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 2 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 3 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 4 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 5 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 6 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 7 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 8 of 21

Regulation Approved Regulation Approved Regulation Approved Regulation Approved 1xT90S ID Laser marking (with caution text) Update : Model Drawing 1xT90S (Canada) 1xT90S (UK) 1xT90S (USA) 1xT90S (EU,Spain) 1xT90S (EU, France) 1xT90S (EU, Germany) Regulation Approved Regulation Approved Model / Modèle:14T90S Power / Énergie: 20 V 3.25 AThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. All regulation marks for the optional modules are attached under the customer access panel or on the module itself if installed. FCC ID: BEJNT- 1 4T90S IC: 2703H-14T90S CAN ICES-003(B) / NMB-003(B) Product of China / Produit de la Chine 1XT90S-A.AB50CD S/N: 12345678910HB M/D: 20233.01. E142692 I.T.E. Factory ID: CQ10 1XT90S-A.AB50CD S/N: 12345678910HB M/D: 2023.01. E142692 I.T.E. Factory ID: CQ10 Model / Modèle:14T90S Power / Énergie: 20 V 3.25 A IC: 2703H-14T90S CAN ICES-003(B) / NMB-003(B) Product of China Produit de la Chine Utilisez l’ordinateur sur une surface plane et dure sans obstruer la fente d’aération du système. Veuillez vous reporter aux précautions du Guide de dépannage pour une utilisation pratique et sûre. Mise en garde 3.25 A All regulation marks for the optional modules are attached on the module itself if installed. UK Importer : LG Electronics U.K. Ltd, Velocity 2, Brooklands Drive, Weybridge, KT13 0SL LG Electronics Inc. Single Point of Contact (EU/UK) : Krijgsman 1, 1186 DM Amstelveen, The Netherlands Model : 14T90S INPUT : 20 V RF Module Inside : INTEL AX211D2W 1XT90S-A.AB50CD M/D: 2023.02. S/N: 12345678910HB Product of China Detailed information in the user manual información detallada en el manual de usuario Use it on a flat and hard surface without blocking the system vent. Please refer to the precautions in the Troubleshooting Guide for convenient and safe use. Caution 3.25 A All regulation marks for the optional modules are attached on the module itself if installed. UK Importer : LG Electronics U.K. Ltd, Velocity 2, Brooklands Drive, Weybridge, KT13 0SL LG Electronics Inc. Single Point of Contact (EU/UK) : Krijgsman 1, 1186 DM Amstelveen, The Netherlands Model : 14T90S INPUT : 20 V RF Module Inside : INTEL AX211D2W 1XT90S-A.AB50CD M/D: 2023.02. S/N: 12345678910HB Product of China Detailed information in the user manual información detallada en el manual de usuario Benutzen Sie es auf einer ebenen und harten Oberfläche, ohne dass die Belüftung des Systems behindert wird. Hinweise zur angenehmen und sicheren Benutzung finden Sie unter Sicherheitshinweise und im Troubleshooting Guide. Vorsicht 3.25 A All regulation marks for the optional modules are attached on the module itself if installed. UK Importer : LG Electronics U.K. Ltd, Velocity 2, Brooklands Drive, Weybridge, KT13 0SL LG Electronics Inc. Single Point of Contact (EU/UK) : Krijgsman 1, 1186 DM Amstelveen, The Netherlands Model : 14T90S INPUT : 20 V RF Module Inside : INTEL AX211D2W 1XT90S-A.AB50CD M/D: 2023.02. S/N: 12345678910HB Product of China Detailed information in the user manual información detallada en el manual de usuario Modèle : 14T90S Entrée: 20 V 3.25 A Tous les logos réglementaires relatifs aux modules optionnels sont apposés sur le module s’il est installé. Module RF installé : INTEL AX211D2W Point de contact unique LG Electronics Inc. (EU/UK) : Krijgsman 1, 1186 DM Amstelveen, The Netherlands Fabriqué en Chine Plus d’informations dans le manuel utilisateur 1XT90S-A.AB50CD M/D: 2023.02. S/N: 12345678910HB à utiliser sur une surface plane et rigide sans bloquer la ventilation du système. Veuillez consulter les précautions à suivre dans le guide de dépannage LG Troubleshooting afin de bénéficier d’une utilisation pratique et sûre. Attention 1xT90S (EU, Poland) Umieścić na płaskiej twarde powierzchni, nie zasłaniając otworów wentylacyjnych. Zobacz ostrzeżenia w instrukcji Troubleshooting Guide, aby uzyskać informacje o wygodnym i bezpiecznym użytkowaniu. Uwaga 3.25 A All regulation marks for the optional modules are attached on the module itself if installed. UK Importer : LG Electronics U.K. Ltd, Velocity 2, Brooklands Drive, Weybridge, KT13 0SL LG Electronics Inc. Single Point of Contact (EU/UK) : Krijgsman 1, 1186 DM Amstelveen, The Netherlands Model : 14T90S INPUT : 20 V RF Module Inside : INTEL AX211D2W 1XT90S-A.AB50CD M/D: 2023.02. S/N: 12345678910HB Product of China Detailed information in the user manual información detallada en el manual de usuario Regulation Approved StatusP/N Label Location

Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 9 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 10 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 11 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 12 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 13 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 14 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 15 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 16 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 17 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 18 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 19 of 21 Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 20 of 21 Pulse Antenna Appendix No.: EP-2308T045-1 APPENDIX-EUT PHOTOS Project No.: 2308T045 Page 21 of 21 CHILISIN Antenna

Asset No.： E-537 Model No.： D2450V2 Serial No.： 973 Environmental 22.9°C, 52 % Original Cal. Date： February 8, 2021 Next Cal. Date： February 7, 2024 1IEEE Std 1528-2013 2IEC 62209-2 3KDB865664 Equipment：Manufacturer：Model No.：Serial No.：Cal.Organization：Cal. Date： Power AmplifierEMCIEMC053035980869N/ADecember 7, 2021 Power MeterAnritsuMA2487A6K00004714N/AAugust 15, 2021 Power SensorAnritsuMA2491A34138N/AAugust 15, 2021 Directional CouplerWokenTS-PCC0M-05107090019N/AN/A Signal GeneratorR & SSMB100A113244N/AAugust 2, 2021 ENA Network AnalyzerAgilentE5071CMY46524658N/AMarch 22, 2021 Model No ItemOriginal Cal. ResultVerified on 2022/1/18DeviationResult Impedance, transformed to feed 54.1Ω+1.9jΩ49.2Ω+4.2jΩ<5ΩPass Return Loss(dB)-27.2-28.379-4.3%Pass SAR Value for 1g(mW/g) 13.414.15.2%Pass SAR Value for 10g(mW/g) 6.186.55.2%Pass D2450V2 Dipole Internal Calibration Record For Head Tissue Impedance Test-HeadReturn Loss-Head Standard List IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorpiton Rate(SAR) in the Human Head from Wireless Communication Devices: Measurement Texhniques, June 2013 Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body(frequency range of 30 MHz to 6 GHz), SAR Measurement Requirements for 100 MHz to 6 GHz Equipment Information Calibrator:Approver: Validation Report for Head TSL Asset No.： E-537 Model No.： D2450MHzV2 Serial No.： 973 Environmental 24.3°C, 57 % Original Cal. Date： February 8, 2021 Next Cal. Date： February 7, 2024 1IEEE Std 1528-2013 2IEC 62209-2 3KDB865664 Equipment：Manufacturer： Model No.：Serial No.：Cal.Organization：Cal. Date： Power AmplifierEMCI EMC053035980869N/A N/A Power MeterAnritsu MA2495A1128008N/A June 1, 2022 Power SensorAnritsu MA2411B1126001N/A June 1, 2022 Directional CouplerWoken TS-PCC0M-05107090019N/A N/A Signal GeneratorR & S SMB100A113244N/A July 29, 2022 ENA Network AnalyzerAgilent E5071CMY46524658N/A March 21, 2022 Model No ItemOriginal Cal. ResultVerified on 2023/01/03DeviationResult Impedance, transformed to feed point 54.1Ω+1.9jΩ51.4Ω+2.3jΩ<5ΩPass Return Loss(dB)-27.2-27.10.4%Pass SAR Value for 1g(mW/g)13.414.04.5%Pass SAR Value for 10g(mW/g) 6.186.606.8%Pass D2450V2 Dipole Internal Calibration Record For Head Tissue Impedance Test-HeadReturn Loss-Head Standard List IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorpiton Rate(SAR) in the Human Head from Wireless Communication Devices: Measurement Texhniques, June 2013 Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body(frequency range of 30 MHz to 6 GHz), March 2010 SAR Measurement Requirements for 100 MHz to 6 GHz Equipment Information Calibrator:Approver: Validation Report for Head TSL NO.： Asset No.： E-529 Model No.： D5GHzV2 Cal. Date： February 9, 2021 Equipment： ENA Network Analyzer Serial No.： 1121 Next Cal. Date： February 8, 2024 Temp：23.5 °CR.H.：51% 1IEEE Std 1528-2013 2IEC 62209-2 3KDB865664 Equipment：Manufacturer：Model No.：Serial No.：Cal.Organization：Cal. Date： Power AmplifierEMCIEMC053035980869N/ADecember 7, 2021 Power MeterAnritsuMA2487A6K00004714N/AAugust 15, 2021 Power SensorAnritsuMA2491A34138N/AAugust 15, 2021 Directional Coupler WokenTS-PCC0M-05107090019N/AN/A Signal Generator R & SSMB100A113244N/AAugust 2, 2021 ENA Network Analyzer AgilentE5071CMY46524658N/AMarch 22, 2021 FrequencyItemOriginak Cal. ResultVerified on 2022/1/24DeviationResult Impedance, transformed to feed point(Ω) 48.3Ω-8.2jΩ44.3Ω-5.3jΩ<5ΩPass Return Loss(dB)-21.5-21.65-0.7%Pass SAR Value for 1g(mW/g)8.047.833%Pass SAR Value for 10g(mW/g)2.32.261.7%Pass Impedance, transformed to feed point 50.1Ω-2.4jΩ51.4Ω+2.8jΩ<5ΩPass Return Loss(dB)-32.3-30.45.9%Pass SAR Value for 1g(mW/g)8.268.171.1%Pass SAR Value for 10g(mW/g)2.372.350.8%Pass Impedance, transformed to feed point 52.8Ω-1.7jΩ47.9Ω-1.3jΩ<5ΩPass Return Loss(dB)-30-31.78-5.9%Pass SAR Value for 1g(mW/g)8.538.273.0%Pass SAR Value for 10g(mW/g)2.432.372.5%Pass Impedance, transformed to feed point 53.3Ω+2.8jΩ49.2Ω+3.5jΩ<5ΩPass Return Loss(dB)-27.5-28.83-4.8%Pass SAR Value for 1g(mW/g)8.258.012.9%Pass SAR Value for 10g(mW/g)2.332.272.6%Pass Note： Tester：Technical Director： Equipment Information SAR System Uncertainty： % ，（95% CONFIDENCE LEVEL ，Expanded uncertainty K=2 ） 5.8G 5.2G For Head Tissue 5.3G 5.6G Standard List IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorpiton Rate(SAR) in the Human Head from Wireless Communication Devices: Measurement Texhniques, June 2013 Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body(frequency range of 30 MHz to 6 GHz), March 2010 SAR Measurement Requirements for 100 MHz to 6 GHz Dipole Internal Calibration Record Environmental condition： Impedance Test-Head Return Loss-Head NO.： Asset No.： E-529 Model No.： D5GHzV2 Cal. Date： February 9, 2021 Equipment： ENA Network Analyzer Serial No.： 1221 Next Cal. Date： February 8, 2024 Temp：23.6°CR.H.：49% 1 IEEE Std 1528-2013 2IEC 62209-2 3KDB865664 Equipment：Manufacturer：Model No.：Serial No.：Cal.Organization：Cal. Date： Power AmplifierEMCI EMC053035980869N/A N/A Power MeterAnritsuMA2495A1128008N/A June 1, 2022 Power SensorAnritsuMA2411B1126001N/A June 1, 2022 Directional CouplerWokenTS-PCC0M-05107090019N/A N/A Signal GeneratorR & SSMB100A113244N/A July 29, 2022 ENA Network Analyzer AgilentE5071CMY46524658N/A March 17, 2023 FrequencyItemOriginak Cal. ResultVerified on 2023/3/20Deviation Result Impedance, transformed to feed point(Ω) 48.3Ω-8.2jΩ46.2Ω-4.3jΩ<5ΩPass Return Loss(dB)-21.5 -20.35.6%Pass SAR Value for 1g(mW/g)8.047.536%Pass SAR Value for 10g(mW/g)2.3 2.147.0%Pass Impedance, transformed to feed point 50.1Ω-2.4jΩ54.3Ω-5.9jΩ<5ΩPass Return Loss(dB)-32.3-32.7-1.2%Pass SAR Value for 1g(mW/g)8.268.29-0.4%Pass SAR Value for 10g(mW/g)2.372.350.8%Pas…

Text truncated - open the document above for the full version.

Asset No.： E-1082 Model No.： D6.5GHzV2 Serial No.： 1041 Environmental 22.6°C, 55 % Original Cal. Date： September 2, 2021 Next Cal. Date： September 1, 2024 1IEC 62209-1528:2020 Equipment：Manufacturer： Model No.：Serial No.：Cal.Organization：Cal. Date： Power AmplifierEMCI EMC053035980869N/A N/A Power MeterAnritsu MA2495A1128008N/A June 1, 2022 Power SensorAnritsu MA2411B1126001N/A June 1, 2022 Directional CouplerWoken TS-PCC0M-05107090019N/A N/A Signal GeneratorR&S SMR40100502N/A January 10, 2022 ENA Network AnalyzerAgilent E5071CMY46524658N/A March 21, 2022 Model No ItemOriginal Cal. ResultVerified on 2022/08/05DeviationResult Impedance, transformed to feed point 49.6Ω-1.5jΩ51.0Ω-3.4jΩ<5ΩPass Return Loss(dB)-36.2-35.71.4%Pass SAR Value for 1g(mW/g)29.127.8-4.5%Pass SAR Value for 10g(mW/g)5.345.21-2.4%Pass D6.5GHzV2 Dipole Internal Calibration Record For Head Tissue Impedance Test-HeadReturn Loss-Head Standard List Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1528: Human models, instrumentation, and procedures(Frequency range of 4 MHz to 10 GHz) Equipment Information Calibrator:Approver: Validation Report for Head TSL

Test Laboratory: BTL Date: 2023/8/21 System Check_H2450 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used (interpolated): f = 2450 MHz; σ = 1.76 S/m; ε r = 38.646; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2023/6/16 - Probe: EX3DV4 - SN7369; ConvF(7.61, 7.61, 7.61) @ 2450 MHz; Calibrated: 2023/5/22 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: 2149 System Performance Check at Frequencies above 1 GHz/Pin=250mW/Area Scan (9x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 20.0 W/kg System Performance Check at Frequencies above 1 GHz/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 109.8 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 25.7 W/kg SAR(1 g) = 12.1 W/kg; SAR(10 g) = 5.57 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 47.3% Maximum value of SAR (measured) = 20.6 W/kg 0 dB = 20.0 W/kg = 13.00 dBW/kg Test Laboratory: BTL Date: 2023/8/2 4 System Check_H5G Frequency: 5200 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used: f = 5200 MHz; σ = 4.458 S/m; ε r = 37.383; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2023/6/16 - Probe: EX3DV4 - SN7369; ConvF(5.17, 5.17, 5.17) @ 5200 MHz; Calibrated: 2023/5/22 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: 2149 Configuration/Pin=100mW/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 13.4 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 63.91 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 31.5 W/kg SAR(1 g) = 7.63 W/kg; SAR(10 g) = 2.18 W/kg Smallest distance from peaks to all points 3 dB below = 7.5 mm Ratio of SAR at M2 to SAR at M1 = 53.5% Maximum value of SAR (measured) = 19.6 W/kg 0 dB = 19.6 W/kg = 12.92 dBW/kg Test Laboratory: BTL Date: 2023/8/24 System Check_H5G Frequency: 5300 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used: f = 5300 MHz; σ = 4.582 S/m; ε r = 37.197; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2023/6/16 - Probe: EX3DV4 - SN7369; ConvF(5.01, 5.01, 5.01) @ 5300 MHz; Calibrated: 2023/5/22 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: 2149 Configuration/Pin=100mW/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 14.0 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 64.20 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 33.8 W/kg SAR(1 g) = 8.04 W/kg; SAR(10 g) = 2.29 W/kg Smallest distance from peaks to all points 3 dB below = 7.5 mm Ratio of SAR at M2 to SAR at M1 = 52.5% Maximum value of SAR (measured) = 20.7 W/kg 0 dB = 20.7 W/kg = 13.16 dBW/kg Test Laboratory: BTL Date: 2023/8/2 4 System Check_H5G Frequency: 5600 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used: f = 5600 MHz; σ = 4.946 S/m; ε r = 36.499; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2023/6/16 - Probe: EX3DV4 - SN7369; ConvF(4.6, 4.6, 4.6) @ 5600 MHz; Calibrated: 2023/5/22 - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: 2149 Configuration/Pin=100mW/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 14.2 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 61.67 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 36.0 W/kg SAR(1 g) = 7.9 W/kg; SAR(10 g) = 2.24 W/kg Smallest distance from peaks to all points 3 dB below = 7.6 mm Ratio of SAR at M2 to SAR at M1 = 49.8% Maximum value of SAR (measured) = 20.9 W/kg 0 dB = 20.9 W/kg = 13.20 dBW/kg Test Laboratory: BTL Date: 2023/8/2 4 System Check_H5G Frequency: 5800 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used: f = 5800 MHz; σ = 5.2 S/m; ε r = 36.096; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2023/6/16 - Probe: EX3DV4 - SN7369; ConvF(4.6, 4.6, 4.6) @ 5800 MHz; Calibrated: 2023/5/22 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: 2149 Configuration/Pin=100mW/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 14.6 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 61.11 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 37.8 W/kg SAR(1 g) = 7.92 W/kg; SAR(10 g) = 2.22 W/kg Smallest distance from peaks to all points 3 dB below = 7.6 mm Ratio of SAR at M2 to SAR at M1 = 48.3% Maximum value of SAR (measured) = 21.3 W/kg 0 dB = 21.3 W/kg = 13.28 dBW/kg Area Scan Zoom Scan Area Scan Zoom Scan Grid Exten…

Text truncated - open the document above for the full version.

Test Laboratory: BTL Date: 2023/8/21 Bluetooth Frequency: 2480 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used: f = 2480 MHz; σ = 1.8 S/m; ε r = 38.651; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2023/6/16 - Probe: EX3DV4 - SN7369; ConvF(7.61, 7.61, 7.61) @ 2480 MHz; Calibrated: 2023/5/22 - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: 2149 Notebook Computer/Aux Ant/Edge 3/BT DH5_Ch78/Area Scan (7x8x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.435 W/kg Notebook Computer/Aux Ant/Edge 3/BT DH5_Ch78/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.218 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 1.13 W/kg SAR(1 g) = 0.329 W/kg; SAR(10 g) = 0.104 W/kg Smallest distance from peaks to all points 3 dB below = 4 mm Ratio of SAR at M2 to SAR at M1 = 39.5% Maximum value of SAR (measured) = 0.801 W/kg Test Laboratory: BTL Date: 2023/8/21 WIFI-2.4G Frequency: 2467 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used: f = 2467 MHz; σ = 1.785 S/m; ε r = 38.642; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2023/6/16 - Probe: EX3DV4 - SN7369; ConvF(7.61, 7.61, 7.61) @ 2467 MHz; Calibrated: 2023/5/22 - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: 2149 Notebook Computer/Main Ant/Edge 3/802.11b_Ch12/Area Scan (7x8x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.44 W/kg Notebook Computer/Main Ant/Edge 3/802.11b_Ch12/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.673 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 3.29 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.318 W/kg Smallest distance from peaks to all points 3 dB below = 5 mm Ratio of SAR at M2 to SAR at M1 = 33.7% Maximum value of SAR (measured) = 2.24 W/kg Test Laboratory: BTL Date: 2023/8/21 WIFI-2.4G Frequency: 2467 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used: f = 2467 MHz; σ = 1.785 S/m; ε r = 38.642; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2023/6/16 - Probe: EX3DV4 - SN7369; ConvF(7.61, 7.61, 7.61) @ 2467 MHz; Calibrated: 2023/5/22 - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI V8.0 (20deg probe tilt); Type: QD OVA 004 Ax; Serial: 2149 Notebook Computer/Aux Ant/Edge 3/802.11b_Ch12/Area Scan (7x8x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.07 W/kg Notebook Computer/Aux Ant/Edge 3/802.11b_Ch12/Zoom Scan …

Text truncated - open the document above for the full version.