BEJNT-24CR670All-in-One Thin Client

Please read this manual carefully before operating your set and retain it for future reference. 24CR670W 24CR670N 24CR670I 24CR671W 24CR671N 24CR671N 24CR670WK 24CR670NK 24CR670IK 24CR671WK 24CR671NK 24CR671IK www.lg.com Copyright 2022 LG Electronics Inc. All Rights Reserved. OWNER’S MANUAL 2 ENGLISH TABLE OF CONTENTS ON CLEANING ...............................................................3 LICENSE .......................................................................3 OPEN SOURCE SOFTWARE NOTICE INFORMATION ............4 BEFORE READING THE OWNER’S MANUAL ......................4 ASSEMBLY AND PREPARING ..........................................5 USING THE MONITOR ..................................................19 USING THE RFID FUNCTION .........................................22 USER SETTINGS ..........................................................22 TROUBLESHOOTING ....................................................27 PRODUCT SPECIFICATION ............................................29 3 ENGLISH Please note that this information is for proper use and safety of the equipment. The following symbols may indicate a hazardous situation in which, if not heeded, may result in serious injury or even death to the user or others, or damage to the equipment. WARNING •Indicates warning and safety instructions. If not adhered to, it could result in death or serious injury to the user or others. CAUTION •Indicates a hazardous situation which, if not heeded, may result in minor or moderate injury to the user or others, or damage to the equipment. For users in the United States •United State federal law restricts this equipment to be used by or on the order of a physician. Indications for Use •This product is intended to provide color displays and images from various medical imaging systems. Cybersecurity warnings and responsibilities •Firmware update should be performed through LG Electronics or its distributor. •If LG Electronics or its distributor instructs to update the firmware, update it immediately. ON CLEANING Recommended Cleaning Chemicals •Isopropanol 70 % •Ethanol 70 % •Biospot 500 ppm •0.9 % NaCl solution How to Use Cleaner •Prior to cleaning, turn off the monitor and remove the power cable. •Soak a soft cloth in a recommended cleaner, then lightly rub the screen with no more than 1 N of force. •The cleaner could cause serious damage if it leaks inside the monitor while cleaning. •The display could be damaged, so only clean the parts of the monitor other than the screen's LCD panel. •Do not use benzene, thinner, acids or alkaline cleaners or other such solvents. •Cleaning guidelines for displays must only be carried out by medical professionals (doctors or nurses) and must not be handled by patients. 4 ENGLISH LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Waves MaxxAudio and additional MAXX trademarks are trademarks and/or registered trademarks of Waves Audio Ltd. (Wi-Fi/Bluetooth supported models only.) * OPEN SOURCE SOFTWARE NOTICE INFORMATION Only 24CR67*W, 24CR67*WK To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices and other relevant documents, please visit https://opensource.lge.com. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge. com. This offer is valid to anyone in receipt of this information for a period of three years after our last shipment of this product. BEFORE READING THE OWNER’S MANUAL For models equipped with SSD (solid state disk), stored data may be lost in the event of a malfunction due to the nature of SSD. You must back up important user data in external storage devices (USB HDD, memory, etc.). By the nature of this product, a malfunction in the mainboard may lead to the loss of stored data. Accordingly, you must back up important user data in external storage devices (USB HDD, memory, etc.). If you shut down the product before system loading is complete, it may not shut down properly. Shut down the product once system loading is complete. (System loading takes about 1 to 2 minutes to complete, but it may vary depending on the user environment.) 5 ENGLISH ASSEMBLY AND PREPARING Product Composition Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product. Note that the product and related components may look different from those shown here. Owner's Manual/Regulatory Manual/Cards Power CordAC/DC AdaptorCable Holder Stand Body/Stand Base Mouse (Only 24CR67**K) Keyboard (Only 24CR67**K) 6 ENGLISH CAUTION •Always use genuine LG components to ensure safety and product performance. •The product warranty will not cover damage or injury caused by the use of unauthorized components. •It is recommend that use the supplied components. •If you use generic cables not certified by LG, the screen may not display or there may be image noises. •Need to use the authorized components about the below accessories. Unauthorized components may be cause of the damage and malfunction of the product. ComponentStandard Power CordUS – Approved Medical grade regulation Others – Approved country safety regulation •The AC/DC adaptors and etc. except the upper components need to be used only supplied by manufacturer. NOTE •The components may look different from those illustrated here. •Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the p…

Text truncated - open the document above for the full version.

1. Model Name/Item Name:Cloud MEDICAL Reg book 2. Suffix:WW 3. Part No:MFL71819802 4. REVREV01 5. Number of pages44 6. Folded/UnfoldedUnfolded 7. Trim size (W x H)_Unfolded (mm) 210 x 148 8. Trim size (W x H)_folded (mm) - 9. BinderySaddle stitching 10. Color (Cover)1 11. Paper (Cover)Wood free 12. Weight (cover) (g/m 2 ) 80 13. Color (inner)1 14. Paper (inner)Wood free 15. Weight (inner) (g/m 2 ) 80 16. CoatingNo 17. ThomsonNo 18. Sub-materialNo [Country Name] LGERS/ LGEMX :Mexico LGEKR:Korea Changes the Country name. LGEMA:Poland Printed in [Country Name] LGEND:China Others:Each Country name. [Restriction of Hazardous Substances ] Hazardous substances on this product should be satisfied by substance regulation of Level A-I, A-II, SVHC according to LG(52)B—5011 standard. (1) Hazardous substances test report should be submitted when part certification test and first mass production. (2) Especially, Don’t use or contain lead (Pb) and cadmium (Cd) in ink. REV07 REV06 REV05 REV04 REV03 REV02 REV01 09/07/2022EKMM700403 Checked :Yuri.Hong Approved :Jongok.Kim Rev. Number DateECO NumberOwnerMiyeon.lee COVER INNER 3. History Description NOTEEspecially, Part should be followed and controlled the following specification. 1) To add the french canada language in cover page. (R229000019) 2) To change China class A sentence. (R226000107) 06/20/2022 Miyeon Lee Printing Specification 1. Specification:1.1 Folding / Cover Models SIZE -- REV00 2. Origin Notification ENG/FRE/SPA/GER/POR/GRE/DUT/ITA/SLV/TUR/RUS/KOR/CHI/UKR/JPN/KAZ/HUN/POL/CZE/SLK/ ROM/BUL/SWE/NOR/DAN/FIN/EST/LIT/LAV/SCC/CRO/ARA/MAC/HIN(34) 19. Languages 23 Front Back 45.... Printed in Korea Imprimé en Corée www.lg.com REGULATORY / RÉGLEMENTATION *MFL71819802* (2209-REV01) Copyright © 2022 LG Electronics Inc. All Rights Reserved. Copyright © 2022 LG Electronics inc. Tous droits réservés. 2 FCC Notice (For USA) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Interference Requirements (for UNII devices) High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter. FCC RF Radiation Exposure Statement [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance. CANADA(IC) Notice Industry Canada Statement [For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Avis d’Industrie Canada [Pour la fonction sans fil (WLAN, Bluetooth, etc.)] L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. IC Radiation Exposure Statement [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna & your body. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Avis d’Industrie Canada sur l’exposition aux rayonnements [Pour la fonction sans fil (WLAN, Bluetooth, etc.)] Cet appareil est conforme aux limites d’exposition aux rayonnements d’Industrie Canada pour un environnement non contrôlé. Cet appareil doit être installé de façon à garder une distance minimale de 20 cm (7,8 po) entre la source de rayonnement et votre corps. REMARQUE : LE FABRICANT N’EST PAS RESPONSABLE DES INTERFÉRENCES RADIOÉLECTRIQUES CAUSÉES PAR DES MODIFICATIONS NON AUTORISÉES APPORTÉES À CET APPAREIL. DE TELLES MODIFICATIONS POURRAIENT ANNULER L’AUTORISATION ACCORDÉE À L’UTILISATEUR DE FAIRE FONCTIONNER L’APPAREIL. 3 RSS-247 Requirement [For product havin…

Text truncated - open the document above for the full version.

Authority to Act as Agent Date: October 18, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To Whom It May Concern: I, the undersigned, hereby authorize Mr. Todd Kwak/General Manager of BV CPS ADT Korea Inc. and hereafter referred to as BV CPS ADT Korea to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Mr. Todd Kwak/ General Manager of BV CPS ADT Korea Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing BV CPS ADT Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. Thank you, By: _Sung Soo Kim (Signature 1 ) (Print name) Title: Director, Regulatory and Environmental Affairs_ On behalf of: LG Electronics USA (Company Name) Telephone: 201-266-2215 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Request for Confidentiality Date: October 18, 2022 Subject: Confidentiality Request for: FCC ID: BEJNT-24CR670 / IC: 2703H-24CR670 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term  Permanent Block Diagrams  Short Term External Photos  Short Term ☐ Permanent Internal Photos ☐ Short Term  Permanent Operation Description/Theory of Operation ☐ Short Term  Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term  Permanent Schematics  Short Term Test Setup Photos  Short Term ☐ Permanent User’s Manual LG Electronics Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 90 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: Director, Regulatory and Environmental Affairs (Sung Soo Kim ) (Signature/ Director 3 ) (Print name)

____________________ Date: October 18, 2022 Subject: Family model declaration letter Product: All-in-One Thin Client FCC ID: BEJNT-24CR670 Model : 24CR670N FCC Family Model: 24CR670N, 24CR670NK, 24CR670W, 24CR671N, 24CR671NK, 24CR671W, 24CR671WK, 24CR670I, 24CR670IK, 24CR671I, 24CR671IK, 24CR670WK We hereby declare that models 24CR670N, 24CR670NK, 24CR670W, 24CR671N, 24CR671NK, 24CR671W, 24CR671WK, 24CR670I, 24CR670IK, 24CR671I, 24CR671IK, 24CR670WK, Family model has only differences in CPU, OS, keyboard, mouse. These differences do not degrade the radio performances. Regulatory Model OS Description Keyboard and Mouse 24CR670N Non-OS Celeron No 24CR670NK Non-OS Celeron Yes 24CR670W Window OS Celeron No 24CR671N Non-OS Pentium No 24CR671NK Non-OS Pentium Yes 24CR671W Window OS Pentium No 24CR671WK Window OS Pentium Yes 24CR670I Igel OS Celeron No 24CR670IK Igel OS Celeron Yes 24CR671I Igel OS Pentium No 24CR671IK Igel OS Pentium Yes 24CR670WK Window OS Celeron Yes Sincerely, Sung Soo Kim Director, Regulatory and Environmental Affairs LG Electronics Inc.

Page: 1 of 5 Photograph of EUT(External) Front Page: 2 of 5 Rear Left Page: 3 of 5 Right Top Page: 4 of 5 Bottom Page: 5 of 5 <End>

IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the side of the equipment

Page: 1 of 15 Photograph of EUT(Internal) <Internal Photo> <Antenna A – Front> WLAN RFID (13.56MHz / 125kHz) Page: 2 of 15 <Antenna A – Rear> <Antenna B – Front> Page: 3 of 15 <Antenna B – Rear> <Antenna C – Front> Page: 4 of 15 <Antenna C – Rear> Page: 5 of 15 <Screen – Front> <Screen – Rear> Page: 6 of 15 <USB Board – Front> <USB Board – Rear> Page: 7 of 15 <Ram – Front> <Ram – Rear> Page: 8 of 15 <HDD – Front> <HDD – Rear> Page: 9 of 15 <RF Module – Front> <RF Module – Rear> Page: 10 of 15 <RFID Module – Front> <RFID Module – Rear> Page: 11 of 15 <MNT – Front> <MNT – Rear> Page: 12 of 15 <Main board – Front> <Main board – Front(remove heat sink> Page: 13 of 15 <Main board – Rear> <button board – Front> Page: 14 of 15 <button board – Rear> <Speaker – Front> Page: 15 of 15 <Speaker – label> <END>

RF Exposure FCC ID : BEJNT-24CR670 IC : 2703H-24CR670 RF Exposure Evaluation Exemption for FCC In accordance with FCC KDB Publication 447498 D01 V06 Clause 4.3.1, b) 1) The 1-g and 10-g SAR test exclu sion thresholds for 100 MHz to 6 GHz at test separatio n distances >50 mm are determined by: For transmit frequencies below 100 MHz: In accordance with FCC KDB Publication 447498 D01 V05R02 Clause 4.3.1 c), 1) For test separation distances >50 mm and <200 mm, the power threshold at the corresponding test separation distance at 100 MHz in section 4.3.1 step b) is multiplied by [1 + log(100/f(MHz))] This table is for devices with a separation greater than 50 mm MHz Max Power [dBm] Duty Cycle [%] EUT EIRP [mW] Min Sep [mm] SAR Exc Threshold at 50mm 4.3.1 a) [mW] SAR Exclusion threshold per 4.3.1 b)1) [mW] SAR Exclusion threshold per 4.3.1 c) 1) [mW] Result Notes 0.125 -19.28 100 0.01180 200 474.3 574.3 2241.7 Exempt Peak 13.56 -26.12 100 0.00244 200 474.3 574.3 1072.7 Exempt Peak EUT EIRP << SAR exclusion threshold per 4.3.1 c) 1) RF Exposure Evaluation Exemption for IC – 13.56 MHz Per RSS-102 issue 5, section 2.5.1 as reproduced below: 2.5.1 Exemption from Routine Evaluation Limits – SAR Evaluation SAR evaluation is required if the separation distance between the user and/or bystander and the antenna and/or radiating element of the device is less than or equal to 20 cm, except when the device operates at or below the applicable output power level (adjusted for tune-up tolerance) for the specified separation distance defined in below table: Frequency [MHz] Exemption Limits [mW] Separation distance of ≤ 5 mm Separation distance of 10 mm Separation distance of 15 mm Separation distance of 20 mm Separation distance of 25 mm ≤300 71 mW 101 mW 132 mW 162 mW 193 mW 450 52 mW 70 mW 88 mW 106 mW 123 mW 835 17 mW 30 mW 42 mW 55 mW 67 mW 1900 7 mW 10 mW 18 mW 34 mW 60 mW 2450 4 mW 7 mW 15 mW 30 mW 52 mW 3500 2 mW 6 mW 16 mW 32 mW 55 mW 5800 1 mW 6 mW 15 mW 27 mW 41 mW Frequency [MHz] Exemption Limits (mW) Separation distance of 30 mm Separation distance of 35 mm Separation distance of 40 mm Separation distance of 45 mm Separation distance of ≥ 50 mm ≤300 223 mW 254 mW 284 mW 315 mW 345 mW 450 141 mW 159 mW 177 mW 195 mW 213 mW 835 80 mW 92 mW 105 mW 117 mW 130 mW 1900 99 mW 153 mW 225 mW 316 mW 431 mW 2450 83 mW 123 mW 173 mW 235 mW 309 mW 3500 86 mW 124 mW 170 mW 225 mW 290 mW 5800 56 mW 71 mW 85 mW 97 mW 106 mW Output power level shall be the higher of the maximum conducted or equivalent isotropically radiated power (e.i.r.p.) source-based, time-averaged output power. For controlled use devices where the 8 W/kg for 1 gram of tissue applies, the exemption limits for routine evaluation in Table 1 are multiplied by a factor of 5. For limb-worn devices where the 10 gram value applies, the exemption limits for routine evaluation in Table 1 are multiplied by a factor of 2.5. If the operating frequency of the device is between two frequencies located in Table 1, linear interpolation shall be applied for the applicable separation distance. For test separation distance less than 5 mm, the exemption limits for a separation distance of 5 mm can be applied to determine if a routine evaluation is required. For medical implants devices, the exemption limit for routine evaluation is set at 1 mW. The output power of a medical implants device is defined as the higher of the conducted or e.i.r.p to determine whether the device is exempt from the SAR evaluation Mode Frequency (MHz) Field Strength (dBuV/m) Max. Power (mW) Tune-Up Tolerance Radiated Power (e.i.r.p.) (mW) Min. test separation distance (mm) Limits of RF Exposure Evaluation (mW) Result RFID 13.56 29.11* 0.00244 ±1dB 0.00308 20 345 Pass NOTE: 1. Note: * Please refer report No. RP-9208 Rev. 0 for testing detail. 2. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. RF Exposure Evaluation Exemption for IC – 125 kHz The basic restrictions are based on internal induced electric field or SAR. The relationship between the induced field and that of the exposure area is proportional; thus, in cases where the limbs are the primary point of exposure, the induced field would be less than that induced in the trunk of the human body. When assessing compliance at the compliance distance, where limb exposure is the primary exposed condition, the following table may be used for relaxation of the RSS-102 nerve stimulation RLs. Limb Exposure Limit Relaxation Exposure Condition Relaxation Factor Electric Field (V/m R.M.S.) Magnetic Field (A/m R.M.S.) Whole Body / Torso / Head 1.0 83 90 Leg 1.5 124.5 135 Arm 2.5 207.5 225 Hand/Foot 5.0 415 450 Nerve Stimulation Exposure Test Result 3 inch H-field measurement result: Frequency (MHz) H-Field measurements [A/m] Max [A/m] Limit [A/m] Result Top Bottom Left Right Front Rear 0.125 0.0567 0.0562 0.0581 0.0562 0.0581 0.0562 0.0581 90 Pass E-field measurement result: Frequency (MHz) E-Field measurements [V/m] Max [V/m] Limit [V/m] Result Top Bottom Left Right Front Rear 0.125 0.3795 0.3996 0.3887 0.3846 0.3887 0.3834 0.3996 83 Pass

Report No.: FCCBVCI-WAY-P22090077-1R1 Page: 2 of 27 Report Format Version: BV-FRFTF-01-004 RELEASE CONTROL RECORD REPORT NO. REASON FOR CHANGE DATE ISSUED FCCBVCI-WAY-P22090077-1 Original release 2022.10.31 FCCBVCI-WAY-P22090077-1R1 Family Series add note (page 8) 2022.12.12 Report No.: FCCBVCI-WAY-P22090077-1R1 Page: 3 of 27 Report Format Version: BV-FRFTF-01-004 Table of Contents RELEASE CONTROL RECORD ...........................................................................................................................................2 1 SUMMARY OF TEST RESULTS ....................................................................................................................................5 1.1 DECISION RULES FOR STATEMENT OF CONFORMITY ............................................................................................................................... 6 1.2 MEASUREMENT UNCERTAINTY ..................................................................................................................................................................... 6 2 GENERAL INFORMATION ...........................................................................................................................................7 2.1 GENERAL DESCRIPTION OF EUT.............................................................................................................................................................. 7 2.2 DESCRIPTION OF TEST MODE .................................................................................................................................................................. 8 2.2.1 Test Mode Applicability and Tested Channel Details ................................................................................................. 9 2.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................................................................. 10 2.4 TEST EQUIPMENT..................................................................................................................................................................................... 11 3 TEST RESULTS ............................................................................................................................................................ 12 3.1 ANTENNA REQUIREMENT ....................................................................................................................................................................... 12 3.2 RADIATED EMISSION MEASUREMENT .................................................................................................................................................. 13 3.2.1 Regulation .................................................................................................................................................................................... 13 3.2.2 Test Procedure ........................................................................................................................................................................... 14 3.3.3 Deviation from Test Standard ............................................................................................................................................. 14 3.3.4 Test Setup .................................................................................................................................................................................... 15 3.2.5 Test Result of Radiated Spurious Emission .................................................................................................................. 16 3.3 FREQUENCY STABILITY ............................................................................................................................................................................ 20 3.3.1 Regulation .................................................................................................................................................................................... 20 3.3.2 Test Procedure ........................................................................................................................................................................... 20 3.3.3 Deviation from Test Standard ............................................................................................................................................. 20 3.3.4 Test Setup .................................................................................................................................................................................... 20 3.3.5 Test Result .................................................................................................................................................................................... 21 3.4 20DB BANDWIDTH & 99% OBW ...................................................................................................................................................... 22 3.4.1 Regulation .................................................................................................................................................................................... 22 3.4.2 Test Procedure .................................................................................................…

Text truncated - open the document above for the full version.