BEJNT-LG13Z95Notebook Computer

Model Name : LG13Z95 2 Tips / Important Safety Precautions Tips / Important Safety Precautions UsingLG Easy Guide, LG Troubleshooting LG Easy Guide(User's Guide) andLG Troubleshooting(Troubleshooting Guide) are provided to users for easy and convenient use of the product. LG Easy GuideandLG Troubleshootingcan be used on the Start screen and the Desktop. Running in the Start Screen On the Start screen, press[LG Easy Guide]or[LG Troubleshooting]tile to run it. •LG Easy GuideandLG Troubleshootingon the Start screen can be used only in the online environment. •If the product is not connected to the Internet, use[LG Easy Guide]and[LG Troubleshooting]installed on the Desktop. ENGLISH Tips / Important Safety Precautions 3 Running on the Desktop PC 1On the Start screen or Desktop, click [] icon to run[LG Easy Starter]. TIP LG Easy Startermay be installed throughLG Update Center. 2From[LG Software]menu, run[LG Easy Guide]or[LG Troubleshooting]. •IfLG Easy Starteris not installed, refer to[Run, Stand by and Exit Windows Store App]and then run[LG Easy Guide]or[LG Troubleshooting]. ENGLISH 4 Tips / Important Safety Precautions Information/Precautions Before Using Before readingLG Easy Guide, first check the following information. •Representative images are used inLG Easy Guide. Product purchase may differ in appearance and color. •LG Easy Guideincludes instruction about optional products. There may be information about products you did not purchase. •ThisLG Easy Guidehas been written for the Windows 8.1 operating system. •Use, duplication, or reproduction of any part ofLG Easy Guidewithout prior permission from LG Electronics Inc. is strictly prohibited. •The contents ofLG Easy Guideare subject to change without prior notice. •LG Electronics Inc. does not provide warranty for data loss. In order to minimize damage from data loss, please make backup copies of important data. •WARNING:This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.Wash hands after handling. Safety Precaution Notations The below symbols are to inform you of dangers and safety concerns that you must be aware of. Read the symbol-indicated instructions with caution to avoid any possible mishap. WARNING Appears in the case of noncompliance with the instruction that may cause serious physical damage or fatal injuries. CAUTION Appears in the case of noncompliance with the instruction that may cause minor damage to the body or the machine. Text Notations The below symbols are used to display information required to use the product. Familiarize yourself with the instructions marked by the symbols to ensure proper operation of the product. TIP Indicates that the following information is added to help the user utilize the machine more conveniently. ENGLISH Tips / Important Safety Precautions 5 The Option symbol indicates that the concerned device is not included in the product package and thus has to be purchased separately, or the device may not be applied to the user's machine depending on model type. Manufacturer and Copyright Microsoft™, MS™, WinPE™, and Windows ® are the registered trademarks of Microsoft Corporation™. IBM™, IBM Personal Computer™, PS/2™, and PC AT™are the registered trademarks of International Business Machines Corporation™. The SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc. LG™logo is a registered trademark of LG™Corporation. SONY™logo and Memory Stick™are the registered trademarks of SONY™Corporation. Transcend™logo is a registered trademark of Transcend™Corporation. SD™logo is a registered trademark of Secure Digital™Corporation. xD™logo is a registered trademark of FUJIFILM™Co., ltd. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Sound is a trademark of DTS, Inc.ⓒDTS, Inc. All Rights Reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Studio Sound is a trademark of DTS, Inc.ⓒDTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. LG Easy Guidemay contain undetectable errors despite our dedicated efforts to provide users with reliable information. We ask for your understanding. The illustrated figures inLG Easy Guidemay differ in appearance with the actual products. LG Electronics Inc. reserves the right to modify any part of this manual for quality purposes, without prior notice. Unauthorized reproduction or duplication of any part ofLG Easy Guideis strictly prohibited. Copyright (C) 2015 LG Electronics Inc. Digitalmate Co., LTD ENGLISH 6 Tips / Important Safety Precautions Country of OriginChina ManufacturerLG Electronics Inc. OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [email protected]. This offer is valid for three (3) years from the date on which you purchased the product. System Protection Feature If the system becomes too hot, the system protection feature automatically stops recharging and switches the power mode to Hibernate or Off. The PC system may not be reactivated until it cools down enough. Information on Hard Drive / Memory Capacity Information on Hard Drive (HDD, SSD, eMMC) Capacity The hard drive…

Text truncated - open the document above for the full version.

FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 1 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 2 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 3 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 4 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 5 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 6 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 7 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 8 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 9 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 10 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 11 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 12 FCC ID: BEJNT-LG13Z95 IC: 2703H-LG13Z95 Copyright Ⓒ 2015, DT&C Co., Ltd. View 13 Antenna

Report No.: DRRFCC1505-0043(1) FCC ID: BEJNT-LG13Z95 Date of issue: Jun. 18, 2015 Copyright Ⓒ 2015, DT&C Co., Ltd. SAR Test Setup Photographs  Body SAR Test Photo Report No.: DRRFCC1505-0043(1) FCC ID: BEJNT-LG13Z95 Date of issue: Jun. 18, 2015 Copyright Ⓒ 2015, DT&C Co., Ltd.  Test Setup Photo (Body SAR Test Photo) Report No.: DRRFCC1505-0043(1) FCC ID: BEJNT-LG13Z95 Date of issue: Jun. 18, 2015 Copyright Ⓒ 2015, DT&C Co., Ltd.  Test Setup Photo(Rear)

DTNC1503-01165 FCC ID: BEJNT-LG13Z95 Report No.: DRTFCC1507-0158 TRF-RF-212(04)150610 Page 2 / 30 Copyright ○ C 2015, DT&C Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1507-0158 Jul. 06, 2015 Initial issue DTNC1503-01165 FCC ID: BEJNT-LG13Z95 Report No.: DRTFCC1507-0158 TRF-RF-212(04)150610 Page 3 / 30 Copyright ○ C 2015, DT&C Co., Ltd. Table of Contents 1. General Information ............................................................................................................... 5 1.1. Testing Laboratory .......................................................................................... 5 1.2. Details of Applicant ......................................................................................... 5 1.3. Description of EUT .......................................................................................... 5 1.4. Declaration by the manufacturer .................................................................... 5 1.5. Information about the FHSS characteristics: ................................................ 6 1.6. Test Equipment List ........................................................................................ 7 1.7. Summary of Test Results ................................................................................ 8 1.8 Conclusion of worst-case and operation mode .............................................. 9 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission .......... 10 2.1. Test Setup ...................................................................................................... 10 2.2. Limit ................................................................................................................ 10 2.3. Test Procedures............................................................................................. 11 2.3.1. Test Procedures for Radiated Spurious Emissions................................ 11 2.3.2. Test Procedures for Conducted Spurious Emissions ............................ 11 2.4. Test Results ................................................................................................... 12 2.4.1. Radiated Emission .................................................................................... 12 3. Carrier Frequency Separation............................................................................................. 15 3.1. Test setup....................................................................................................... 15 3.2. Limit ................................................................................................................ 15 4. Number of Hopping Frequencies ....................................................................................... 16 4.1. Test Setup ...................................................................................................... 16 4.2. Limit ................................................................................................................ 16 5. 20 dBc BW ............................................................................................................................. 17 5.1. Test Setup ...................................................................................................... 17 5.2. Limit ................................................................................................................ 17 5.3. Test Procedure .............................................................................................. 17 5.4. Test Results ................................................................................................... 17 6. Time of Occupancy (Dwell Time) ........................................................................................ 18 6.1. Test Setup ...................................................................................................... 18 6.2. Limit ................................................................................................................ 18 6.3. Test Procedure .............................................................................................. 18 6.4. Test Results ................................................................................................... 18 7. Maximum Peak Output Power Measurement .................................................................... 19 7.1. Test Setup ...................................................................................................... 19 7.2. Limit ................................................................................................................ 19 7.3. Test Procedure ............................................................................................... 19 7.4. Test Results ................................................................................................... 20 8. Transmitter AC Power Line Conducted Emission ............................................................ 26 8.1. Test Setup ...................................................................................................... 26 DTNC1503-01165 FCC ID: BEJNT-LG13Z95 Report No.: DRTFCC1507-0158 TRF-RF-212(04)150610 Page 4 / 30 Copyright ○ C 2015, DT&C Co., Ltd. 8.2. Limit ................................................................................................................ 26 8.3. Test Procedures ............................................................................................. 26 8.4. Test Results ................................................................................................... 27 9. Antenna Requirement .......................................................................................................... 29 APPENDIX I ............................................................................................................................... 30 DTNC1503-01165 FCC ID: BEJNT-LG13Z95 Report No.: DRTFCC1507-0158 TRF-RF-212(04)150610 Page 5 / 30 Copyright ○ C 2015, DT&C Co.…

Text truncated - open the document above for the full version.

FCC ID: PD97260NG and PD97260NGU IC: 1000M-7260NG Test Report No.: 12121201.fcc04 Page 1 of 43 Client: Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 USA Test Item: Bluetooth (DSS) Wireless Network Adapter Module Identification: 7260NGW MAC address: 001500B6698F Project No.: 12121201 Date of Receipt: January 07, 2013 Testing Location: TÜV Rheinland EPS B.V. Eiberkamp 10 9351VT Leek Test Specification: FCC 47 CFR Part 15, Subpart C, Section 15.209 and15.247 (10-1-12 Edition) RSS-Gen (issue 3, December 2010) an RSS-210 (Issue 8, December 2010) ANSI C63.10-2009 Test Result: The test item passed the test specification(s). Testing Laboratory: TÜV Rheinland EPS B.V. Eiberkamp 10 9351 VT Leek Tested by: 2013-03-18 R. van der Meer / Inspector Date Name/Position Signature Reviewed by: 2013-03-18 O. Hoekstra / Reviewer Date Name/Position Signature Other Aspects:-- Abbreviations: P(ass) = passed F(ail) = failed N/A = not applicable N/T = not tested This report shall not be reproduced, except in full, without the written permission of TÜV Rheinland EPS B.V. The test results relate only to the item(s) tested. . FCC ID: PD97260NG and PD97260NGU IC: 1000M-7260NG Test Report No.: 12121201.fcc04 Page 2 of 43 TEST SUMMARY 5.1.1 VOLTAGE REQUIREMENTS RESULT: PASS 5.1.2 ANTENNA REQUIREMENTS RESULT: PASS 5.2.1 CONDUCTED MEASUREMENTS AT ANTENNA PORT RESULT: PASS 5.2.2 20DB AND 99% BANDWIDTH RESULT: PASS 5.2.3 NUMBER OF CHANNELS AND OCCUPANCY TIME RESULT: PASS 5.2.4 CARRIER FREQUENCY SEPARATION RESULT: PASS 5.2.5 BAND EDGE CONDUCTED EMISSIONS RESULT: Pass 5.2.6 RADIATED SPURIOUS EMISSIONS OF TRANSMITTER RESULT: PASS 5.2.7 RADIATED SPURIOUS EMISSIONS OF TRANSMITTER IN RESTRICTED BANDS RESULT: PASS 5.4.1 AC POWER LINE CONDUCTED EMISSION OF TRANSMITTER RESULT: PASS FCC ID: PD97260NG and PD97260NGU IC: 1000M-7260NG Test Report No.: 12121201.fcc04 Page 3 of 43 Contents 1. GENERAL REMARKS ........................................................................................................................... 4 1.1 COMPLEMENTARY MATERIALS ............................................................................................................ 4 2. TEST SITES ........................................................................................................................................ 4 2.1 TEST FACILITIES ................................................................................................................................. 4 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS TABLE 1: LIST OF TEST AND MEASUREMENT EQUIPMENT ........................................................................................................................................ 5 2.3 MEASUREMENT UNCERTAINTY ............................................................................................................ 6 3. GENERAL PRODUCT INFORMATION ...................................................................................................... 7 3.1 PRODUCT FUNCTION AND INTENDED USE ............................................................................................ 7 3.2 SYSTEM DETAILS................................................................................................................................ 7 3.3 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE .......................................................................... 8 4. TEST SET-UP AND OPERATION MODES ................................................................................................ 9 4.1 TEST METHODOLOGY ......................................................................................................................... 9 4.2 OPERATION MODES ............................................................................................................................ 9 4.3 PHYSICAL CONFIGURATION FOR TESTING .......................................................................................... 10 4.4 TEST SOFTWARE .............................................................................................................................. 11 4.5 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT .......................................................................... 12 5. TEST RESULTS ................................................................................................................................. 13 5.1 TECHNICAL REQUIREMENTS .............................................................................................................. 13 5.1.1 Voltage Requirements ............................................................................................................... 13 5.1.2 Antenna Requirements .............................................................................................................. 13 5.1.3 Restricted Bands of Operation .....................................................Error! Bookmark not defined. 5.2 CONDUCTED MEASUREMENTS AT ANTENNA PORT ............................................................................. 14 5.2.1 Conducted Output Power ........................................................................................................... 14 5.2.2 20dB and 99% Bandwidth .......................................................................................................... 19 5.2.3 Number of hopping channels and Channel Occupancy ............................................................ 24 5.2.4 Band Edge Conducted Emissions ............................................................................................. 31 5.2.5 Radiated Spurious Emissions of Transmitter ............................................................................. 34 5.2.6 Radiated Spurious Emissions of Transmitter in restricted bands .............................................. 39 5.3 SPURIOUS EMISSIONS IN RECEIVE MODE ............................................................................................ 41 5.4 AC POWER LINE CONDUCTED MEASUREMENT…

Text truncated - open the document above for the full version.

FCC ID: BEJNT-LG13Z95 Copyright Ⓒ 2015 DT&C Co., Ltd. EUT Axis information X Axis Y Axis Z Axis FCC ID: BEJNT-LG13Z95 Copyright Ⓒ 2015 DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (below 1000MHz) FCC ID: BEJNT-LG13Z95 Copyright Ⓒ 2015 DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz) Material of Black plate: Plastic (Non-conductive material) FCC ID: BEJNT-LG13Z95 Copyright Ⓒ 2015 DT&C Co., Ltd. Test Setup Photo for AC Conducted Emissions

Using Software 129 5Bass Boost: Boosts the lowest frequencies for enhanced bass sound. 6Change Output Device: Changes the sound output device. TIP If you want to remove Audio Driver or DTS Sound, remove [DTS Sound] and [Realtek High Definition Audio Driver] in the order specified and restart the system. If you want to reinstall Audio Driver or DTS Sound, remove [DTS Sound] and [Realtek High Definition Audio Driver] in the order specified and install [Realtek High Definition Audio Driver]. Then restart the system and install [DTS Sound]. •If you do not remove or install them in the order specified, an error may occur. ENGLISH 130 Using Software CyberLink YouCam Cyberlink YouCam is the program that can take picture or moving images through the web camera. The figures herein are subject to change without prior notice. The web camera is optional, and so it may not be installed in some models. For more information on how to use CyberLink YouCam, refer to Help. TIP You can change the web camera resolution on Setup menu. Using Cyberlink YouCam 1Switch to the Desktop mode after clicking the [Desktop tile] in the Start screen. And then, click the [ ] icon to run the CyberLink YouCam. 2CyberLink YouCam Home Page appears as follows. aViewer: Displays the Webcam screen. ENGLISH Using Software 131 bImage Gallery: Use to record pictures and moving images, play back or delete those images. cFrame / Animation Effect menu: Can add a frame and animation effect on the screen. Major Buttons Takes pictures. Records movie clips. Takes the picture of Desktop. Configures the user preferences. Switches to the full screen view. Starts the video monitoring function. Allows you to use the Album and the Animation Effect. Allows you to use the Drawing function. Allows you to use the Zoom and Face Recognition functions. Deletes the picture created using the Drawing function or clears the Animation Effect. Displays information about CyberLink YouCam. ENGLISH 132 Using Software Displays the Help. Uploads movie clips to YouTube. Uploads pictures or movie clips to facebook. Sends pictures or movie clips via e-mail. Deletes the selected picture or movie clip. ENGLISH Restoring the System 133 Restoring the System Using the PCLG Recovery Center If the system has an error, you can useLG Recovery Centerto use Windows 8.1 recovery function to recover or restore the system to its initial pre-purchase state. TIP LG Recovery Centeruses the Windows 8.1 recovery function. For more information about Windows 8.1 recovery, refer to [Windows Help and Support]. CAUTION If you have deleted the restoration data in the protected area of the disk, or have arbitrarily installed another operating system, the restore function may not work. Click the [ ] icon in Desktop to runLG Recovery Center. ENGLISH 134 Restoring the System 1PC Refresh : Recovers the PC without losing any personal files. CAUTION PC settings are reset to default and any user-installed software will be deleted. 2PC Reset : Removes all items from the system and restores the system to its initial pre- purchase state. CAUTION All data is lost during the initialization, so you must backup all critical data in advance. It may take about 5 hours or longer depending on the system conditions. 3Create Recovery Drive : You can create a recovery drive in Windows as a precaution against a system failure that prevents you from entering the operating system, or any other severe system issues. a When the following screen appears, select [Copy the recovery partition from the PC to the recovery drive.] and click [Next]. b When the following screen appears, select the USB flash drive and click [Next]. CAUTION This process deletes all the data on the storage device designated as a recovery drive. Make sure to back up its data in advance. ENGLISH Restoring the System 135 c Once the storage device is ready, click [Finish] to create a recovery drive. CAUTION Select [Delete the recovery partition] while creating a recovery drive to remove the recovery partition in the PC. Once the recovery partition is removed, you cannot use the recovery function of the PC. You can only recover the system using the recovery media. ENGLISH 136 Restoring the System ENGLISH Restoring the System 137 Recovering from a Boot Failure If booting is impossible due to a serious error with the system, you can recover the system using LG Recovery Center RE. CAUTION If you have deleted the restoration data in the protected area of the disk, the restore function may not work. Using LG Recovery Center RE CAUTION All data is lost during the initialization, so you must backup all critical data in advance. 1Turn on the PC and press [F11]. 2When the following screen appears, select a language you want to use and then click [Next]. ENGLISH 138 Restoring the System 3When the following screen appears, select the [I Agree] button and then click the [Next] button. For recovery, the power adapter must be connected. Connect the system power and then recover the system. ENGLISH Restoring the System 139 4When the factory reset has been completed as shown in the following figure, click the [Complete] button and then restart the system. Recover by Using a Recovery Drive If it is impossible to recover by using [F11], you can recover the system through a recovery drive. TIP To recover by using a recovery drive, you must have the recovery drive made through LG Recovery Center [Create Recovery Drive]. 1Connect the recovery drive to the USB port of the PC. 2Turn on the PC and press [F10]. 3When the screen for selecting the boot device appears, select the connected recovery drive and click [Enter]. 4Select the [Troubleshooting] menu. 5Select the item you want and recover the system following the instructions. ENGLISH 140 Setup and Upgrade Setup and Upgrade Installing the Driver The figures herein may differ by language selection and is subject to change for performance improvements without prior notice. UsingLG Update Centerto install the Driver 1Clic…

Text truncated - open the document above for the full version.