BEJQ50441HAHOUSEHOLD COOKTOP

OWNER'S MANUAL CERAMIC-GLASS INDUCTION COOKTOP Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times. ENGLISH CBIH3013BE, CBIH3613BE MFL72051001 Rev.00_101023 www.lg.com Copyright © 2023 LG Electronics Inc. All Rights Reserved. Scan to see the online manual. en-us_main.book.book Page 1 Friday, October 6, 2023 4:16 PM TABLE OF CONTENTS 2 3IMPORTANT SAFETY INSTRUCTIONS 3READ ALL INSTRUCTIONS BEFORE USE 3WARNING STATEMENTS 6CAUTION STATEMENTS 8PRODUCT OVERVIEW 8Product Features 9INSTALLATION 9Before Installing 14Installing the Cooktop 18 OPERATION 18Introduction to Induction Cooking 18Cookware 22Control Panel 29 SMART FUNCTIONS 29LG ThinQ Application 33 MAINTENANCE 33Care and Cleaning 35 TROUBLESHOOTING 35Before Calling for Service 38 LIMITED WARRANTY 38USA 42CANADA en-us_main.book.book Page 2 Friday, October 6, 2023 4:16 PM 3IMPORTANT SAFETY INSTRUCTIONS ENGLISH IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Safety Messages Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages. Download this owner's manual at http://www.lg.com All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what may happen if the instructions are not followed. WARNING STATEMENTS WARNING • To reduce the risk of explosion, fire, death, electric shock, scalding or injury to persons when using this product, follow basic precautions, including the following: Installation • Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the National Electrical Code ANSI/NFPA No. 70, latest edition in the United States, and all local code requirements. Install only per installation instructions. • The safety aspects of this appliance comply with accepted technical standards. • Never modify or alter the construction of an appliance such as removal of panels, wire covers or any other permanent part of the product. • Remove all tape and packaging wrap before using the appliance. Destroy the carton and plastic bags after unpacking the appliance. Never allow children to play with packaging material. • The installation and connection of the new appliance must only be carried out by qualified personnel. Operation • Know how to disconnect the electrical power to the appliance at the circuit breaker or fuse box in case of an emergency. Mark the breaker or fuse for ease of identification and swift action if necessary. • Never use your appliance for warming or heating a room. • Persons with a pacemaker or similar medical device should exercise caution using or standing near an induction unit while it is in operation, as the electromagnetic field may affect the working of the This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION. These words mean: WARNING You may be killed or seriously injured if you do not follow instructions. CAUTION You may be injured or cause damage to the product if you do not follow instructions. en-us_main.book.book Page 3 Friday, October 6, 2023 4:16 PM 4IMPORTANT SAFETY INSTRUCTIONS pacemaker or similar medical device. It would be advisable to consult your doctor or the pacemaker or medical device manufacturer about your particular situation. • DO NOT touch cooking zones or areas near these surfaces. Cooking zones may be hot from residual heat even though they are dark in color. Areas near the cooking zones may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they have had sufficient time to cool. • Never wear loose fitting or hanging garments while using this appliance. • Always turn off all controls when cooking is completed. • Do not use water or flour on grease fires. Smother the fire with a pan lid, or use baking soda or a dry chemical or foam-type extinguisher. • Use only dry pot holders. Moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot surface units. Do not use a towel or other bulky cloth instead of a pot holder. • Do not heat unopened food containers. A buildup of pressure may cause the container to burst and result in injury. • Flammable materials should not be stored near or on the cooking surface. This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the appliance. Flammable materials may explode and result in fire or property damage. • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. • Never place combustible items on the cooktop. • Never keep any combustible items or aerosol cans in a drawer located under the cooktop. • When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become too hot. • Overheated fats and oils catch fire quickly. You should supervise cooking when preparing foods in fat or oil. • Use a deep fat thermometer, if possible, to prevent overheating fat beyond the smoking point. • If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. Do not reuse your cooktop until the glass surface has been replaced. • When using the cooktop, never use aluminum foil, products wrapped in aluminum foil, or deep-frozen food in aluminum cookware. • This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. • Young children should be supervised to ensure that they do not play with the appliance. • Access…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name LG Electronics USA, Inc. Address 111 Sylvan Ave, North Building, Englewood Cliffs, NJ 07632 United States Grantee Code BEJ FCC ID BEJQ50441HA Authorized Contact Name Heejae Cho Contact Email [email protected] Contact Phone 201-470-2696 I, the undersi gned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance wi th 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applican t is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept t hat they are the responsible party and agree to abide by t heir responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has r ead, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List LG Electronics USA, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. LG Electronics USA, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: Sep 26, 2023 Print Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNAT ED AGENT LETTER Date: 2023-09-01 TO: Federal Communic ation Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name: LG Electronics USA, Inc. U.S. designated agent Company Name: LG Electronics USA, Inc. Grantee Code: BEJ FRN: 0023476120 Contact Name: Heejae Cho Contact Name: Heejae Cho Address: 111 Sylvan Ave, North Building, Englewood Cliffs, NJ Address: 111 Sylvan Ave, North Building, Englewood Cliffs, NJ City/Province/Zip: Englewood Cliffs/New Jersey/07632 City/Province/Zip: Englewood Cliffs/New Jersey/07632 Telephone: 201-470-2696 Telephone: 201-470-2696 Fax: Fax: Email: 201-816-2031 [email protected] Email: 201-816-2031 [email protected] Applicable Equipment: FCC ID: < BEJQ50441HA> ATTN: Director of Certification: We, < LG Electronics USA, Inc.> understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < LG Electronics USA, Inc. > acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Heejae Cho Name (Printed): Heejae Cho Title: Director, Regulatory and Environmental Affairs Title: Director, Regulatory and Environmental Affairs Signature: Signature:

LG Electronics USA, Inc. 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, United States, 07632 Sep 26, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 LETTER FOR AUTHORIZATION FCC ID: BEJQ50441HA To whom it may concern: I, the undersigned, hereby authorize SGS Korea Co., Ltd. and hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by SGS Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti‐Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS Korea as our agent, we still recognize that we are responsible to: a)comply with the relevant provisions of the certification program; b)make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; LG Electronics USA, Inc. 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, United States, 07632 f)use certification only to indicate the products are certified as being in conformity with specified standards; g)endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h)ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; I) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; J) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; K) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours Heejae Cho Director, NA Regulatory & Environmental Affairs LG Electronics USA, Inc.

LG Electronics USA, Inc. 1000 Sylvan Avenue Englewood Cliffs, New Jersey, United States Sep 26, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 REQUEST FOR CONFIDENTIALITY FCC ID: BEJQ50441HA Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Electronics USA hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG Electronics USA temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: Confidential List Short-Term Internal Photos The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Heejae Cho Director, NA Regulatory & Environmental Affairs LG Electronics USA, Inc. Short-Term Short-Term Short-Term External Photos Test setup photo User manual Long-Term Schematics Long-Term Operational Descriptions Long-Term Block Diagram

External photos of EUT Front View of EUT Rear View of EUT Top View of EUT Buttom View of EUT Front side View of EUT Rear side View of EUT Right side View of EUT Left side View of EUT View of EUT LABEL1 View of EUT LABEL 2

LG(59)-EMC-RPT-040 1 / 4 It is not allowed to copy this report even partly without the approval of LG Electronics. APPENDIX G : LABEL INFORMATION LG(59)-EMC-RPT-040 2 / 4 It is not allowed to copy this report even partly without the approval of LG Electronics. < Front side > LG(59)-EMC-RPT-040 3 / 4 It is not allowed to copy this report even partly without the approval of LG Electronics. < Bottom side > (Technical card) LG(59)-EMC-RPT-040 4 / 4 It is not allowed to copy this report even partly without the approval of LG Electronics. < Box label >

Lqwhuqdo#skrwrv#ri#HXW  )URQWYL HZRI7RSSODWH  5HDUYL HZRI7RSSODWH  ,QVLGH  RI(87  ,QVLGH  RI(87  )URQW9LHZ RI'LVSOD\3&%  5HDU9LHZ RI'LVSOD\3&%  )U RQW9LHZRI,QYHUWHU%3&%  5HDU9LHZRI ,QYHUWHU%3&%  )U RQW9LHZRI,QYHUWHU%3&%  5HDU9LHZRI ,QYHUWHU%3&%  )U RQW9LHZRI0DLQ3&%  5HDU9LHZRI 0DLQ3&%  )U RQW9LHZRI1RLVH)LOWHU3&%  5HDU9LHZRI 1RLVH)LOWHU3&%  )U RQW9LHZRI3RZHU3&%   5HDU9LHZRI 3RZHU3&%   )U RQW9LHZRI3RZHU6036  5HDU9LHZRI 3RZHU6036  )U RQW9LHZRI6HUYR  5HDU9LHZRI 6HUYR  )URQW 9LHZRI5)0RGXOH  5HDU 9LHZRI5)0RGXOH 

FCC ID: BEJQ50441HA According to KDB 447498 D01 General RF Exposure Guidance v06. 1. SAR test exclusion threshold For frequencies below 100 ㎒, the following may be considered for SAR test exclusion (also illustrated in Appendix C): Appendix C SAR Test Exclusion Thresholds for < 100 ㎒ and < 200 ㎜ Approximate SAR test exclusion power thresholds at selected frequencies and test separation distances are illustrated in the following table. The equation and threshold in 4.3.1 must be applied to determine SAR test exclusion. ㎒ < 50 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 ㎜ 100 237 474 481 487 494 501 507 514 521 527 534 541 547 554 561 567 ㎽ 50 308 617 625 634 643 651 660 669 677 686 695 703 712 721 729 738 10 474 948 961 975 988 1001 1015 1028 1041 1055 1068 1081 1095 1108 1121 1135 1 1422 1442 1462 1482 1502 1522 1542 1562 1582 1602 1622 1642 1662 1682 1702 1422 0.1 948 1896 1923 1949 1976 2003 2029 2056 2083 2109 2136 2163 2189 2216 2243 2269 0.05 1019 2039 2067 2096 2125 2153 2182 2211 2239 2268 2297 2325 2354 2383 2411 2440 0.01 1185 2370 2403 2437 2470 2503 2537 2570 2603 2637 2670 2703 2737 2770 2803 2837 The output power and operating frequency of the device are: Frequency [㎑] Distance [㎜] Element Highest Emissions @10m [㏈㎶/m] EIRP [㏈m] EIRP [㎽] Limit [㎽] 30 ~ 65 < 50 Element 1 80.05 -4.72 0.337 997.7 Element 2 68.70 -16.07 0.025 Element 3 75.68 -9.09 0.123 Element 4 79.41 -5.36 0.291 Element 5 76.76 -8.01 0.158 - Aggregated maximum power = 0.337 + 0.025 + 0.123 + 0.291 + 0.158 = 0.934 ㎽ Note; - EIRP (㏈m) = E (㏈㎶/m) + 20 log (10(m)) - 104.77 - The limit was calculated using interpolation derivations below. Where; x: frequency for ㎒ y: thresholds level for ㎽ - The general usage distance is more than 20 cm, but this product evaluated at 50 mm conservatively. 2. Output power into antenna & RF exposure evaluation distance WLAN (2.4G) - Maximum tune up tolerance Operating Frequency (㎒) Output Average Power to Antenna (㏈m) Antenna Gain (㏈i) Power Density at 20㎝ (㎽/㎠) Limits (㎽/㎠) 2 412 ~ 2 462 20 1.5 0.028 102 1 Note: - The power density Pd (5th column) at a distance of 20 ㎝ calculated from the friis transmission formula is far below the limit of 1 ㎽/㎠. - This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. - This equipment should be installed and operated with minimum 20 ㎝ between the radiator and your body. - The antenna gain of this transmitter is less than 6 ㏈i and must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. Conclusion: No SAR is required. 3. Simultaneous transmission of RF Exposure test exclusion for worst case configuration. Element: the ratio is 0.934 / 997.7 WLAN: the ratio is 0.028 102 / 1 Confirm the sum result of individual MPEs ratio is ≤ 1.0; Element + WLAN: (0.934 / 997.7) + (0.028 102 / 1) = 0.029 ≤ 1.0 So, this device meets the KDB447498 D01 v06 section 7.2 requirement of “Simultaneous transmission MPE test exclusion”.

Test Report No. : F690501-RF-EMC001693_1 Page : 2 of 70 EMH7081-01A(2021.04.09)(1) A4(210mm*297mm) Contents 1. General Information ................................................................................................... 4 1.1 Client Information ................................................................................................ 4 1.2 Test Laboratory ................................................................................................... 4 1.3 General Information of E.U.T. ............................................................................. 4 1.4 Operating Modes and Conditions ........................................................................ 4 1.5 Peripheral Equipments ........................................................................................ 5 1.6 Cable List ............................................................................................................ 5 1.7 System Configurations ........................................................................................ 5 1.8 Test System Layout ............................................................................................ 5 1.9 Modifications/Notes ............................................................................................. 5 1.10 Applicable Standards for Testing ...................................................................... 5 1.11 Summary of Test Results .................................................................................. 5 2. Emission Test ............................................................................................................ 6 2.1 Test Results ........................................................................................................ 6 2.2 Test Method and Limits ....................................................................................... 6 2.2.1 Test Method ............................................................................................... 6 2.2.2 Test Limits .................................................................................................. 6 2.3 Conducted Disturbance ...................................................................................... 7 2.3.1 Test Equipments ........................................................................................ 7 2.3.2 Test Site ..................................................................................................... 7 2.3.3 Environment Conditions ............................................................................. 7 2.3.4 Test Results ............................................................................................... 8 2.4 Radiated Emission ............................................................................................ 28 2.4.1 Test Equipments ...................................................................................... 28 2.4.2 Test Site ................................................................................................... 28 2.4.3 Environment Conditions ........................................................................... 28 2.4.4 Test Results ............................................................................................. 29 Appendix A : Measurement Uncertainty ...................................................................... 69 Test Report No. : F690501-RF-EMC001693_1 Page : 3 of 70 EMH7081-01A(2021.04.09)(1) A4(210mm*297mm) Revision History Revision Repor t number Description 0 F690501-RF-EMC001693 Initial 1 F690501-RF-EMC001693_1 Rated power revise in Subclause 1.3, General Information 2 Test Report No. : F690501-RF-EMC001693_1 Page : 4 of 70 EMH7081-01A(2021.04.09)(1) A4(210mm*297mm) 1. General Information 1.1 Client Information Applicant LG Electronics USA, Inc. Applicant Address 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 Manufacturer LG Electronics Inc. Manufacturer Address 170, Seongsanpaechong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, 51553, Rep. of Korea 1.2 Test Laboratory Name and Address SGS Korea Co., Ltd. - Giheung Laboratory 35, Giheungdanji-ro 121beon-gil, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea - Gunpo Laboratory 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, 15807, Republic of Korea - Dongtan Laboratory 12, Dongtansandan 10-gil, Hwaseong-si, Gyeonggi-do, 18487, Republic of Korea FCC Registration No. KR0150 Phone + 82 31 548 0710 Fax + 82 31 548 0719 e-mail [email protected] 1.3 General Information of E.U.T. Classification Specification Product Name HOUSEHOLD COOKTOP Model Name CBIH3613BE Serial No. - Rated Power 240/ 208 V~, 60 ㎐, 38.4 A/ 36.2A, 9200 W / 7524 W Test Voltage AC 208 V, 60 ㎐(Boost Mode), AC 240 V, 60 ㎐(Boost Mode, EMS) Induction Heating Operating Frequency 30-65 ㎑ Installed Wireless Module 10 ㎒ H/W Version LCWB-001 S/W Version V 1.0 Port V 1.0 Components AC IN Function A electric stove using induction coil 1.4 Operating Modes and Conditions Operating mode Operating Condition 1) 208 V Left Rear Cooking Zone Boost Operating A state that a 208V power applied, a pot filled with water in boost is being heated in the center cooking zone and Wi-Fi is on. 2) 208 V Left Front Cooking Zone Boost Operating A state that a 208V power applied, a pot filled with water in boost is being heated in the left front cooking zone and Wi-Fi is on. 3) 208 V Right Front Cooking Zone Boost Operating A state that a 208V power applied, a pot filled with water in boost is being heated in the right front cooking zone and Wi-Fi is on. 4) 208 V Right Rear Cooking Zone Boost Operating A state that a 208V power applied, a pot filled with water in boost is being heated in the right rear cooking zone and Wi-Fi is on. 5) 208 V Center Cooking Zone Operating A state that a 208V power applied, a pot filled with water in boost is being heated in the center cooking zone and Wi-Fi is on. 6) 240 V Left Rear Cooking Zone Boost Operating A state that a 240V power applied,…

Text truncated - open the document above for the full version.

Test setup photos of EUT Continuous Conducted Emission at main _ Front Continuous Conducted Emission at main _ Rear Radiated Emission ( 0.0 9 ㎒ ~ 30 ㎒ ) _ Front Radiated Emission ( 0.0 9 ㎒ ~ 30 ㎒ ) _ Rea r