
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
LG-RD2230 User Guide CDMA PHONE Contents Chapter 1. Getting Started Cautions Phone Overview On screen Icons Chapter 2. Basic Functions Turning the Phone On and Off Making a Call Correcting Dialing Mistakes Receiving Calls Emergency Dialing Speed Dialing Phone Book Features Chapter 3. Menu Features General Guidelines to MENU Access and Settings Names Messages Call History Profiles Setting Planner System Chapter 4. Book Features Names Chapter 5. Message Features Write Message Inbox Outbox Voice Mail Archive Draft Templates Erase Messages Settings Chapter 6. Functions used during a call Scratch pad Mute Voice Privacy Send my number Short DTMF Chapter 7. Accessories Appendix 1. Installation Appendix 2. RF Exposure Statement Chapter 1. Getting Started Cautions ??Using the phone in proximity to receiving equipment (i.e., TV or radio) may cause interference. ??Keep your phone in a safe place when not in use. ??Only use the batteries, antennas, and chargers provided by LG. Using the wrong accessories could void your warranty. ??Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty. ??Do not hold the antenna while the phone is in use. ??Do not use the phone in designated “no cellular phone use” areas. ??Do not expose the phone to high temperature or humidity. ??Avoid getting your phone wet. If the phone gets wet, turn the power off immediately and remove the battery pack. If the phone is mal-functional, return it to the dealer for service. ??Avoid shock or impact on the phone. Phone Overview Function Key Descriptions Lamp The light goes on when you use the power key to turn on the phone and when there are incoming calls and messages. LCD screen Displays messages & indicator icons. END/PWR Used to turn power on/off. This key disconnects a call. Using this key, you can also exit out of a menu back to the phone’s standby display without changing the setting. SEND Allows user to place or answer calls. Mouse Key This mouse key allows quick access to text and voice mail notification messages. Profiles, R- World, and RingTone menu. And these keys are used to scroll through the memory locations and menu items. Alphanumeric Keypad These keys enable you to enter numbers and characters and choose menu items. Soft Keys The current operation of a soft key is defined by the word at the bottom of the display. Soft Keys 2 : If you press this key once in a menu, you can go back one level and if you press and hold the key in a menu, you can go back to the standby display. Star/Pound Key - In the standby status, set the manner mode by pressing the [ * ]button. (for 2 seconds) - In the standby status, set the lock function by pressing the [ # ]button. (for 2 seconds) Clear Key This key erase character and In the standby status, you can go MyMenu On screen Icons The phone screen displays several onscreen icons and onscreen icons appears when the phone is power on. Icons Descriptions Displays the strength of the signal received by the phone and current signal strength is indicated as the number of bars displayed on the screen. No service The phone is not receiving a system signal. In use A call is in progress. No icon indicates the phone is in standby mode. Digital indicator Digital service is available. Analog indicator Analog service is unavailable Indicates that a text message or voice mail has been received Roaming The phone is outside of its home service area. Charge level Indicates battery charge level. D Chapter 2. Basic Functions Turning the Phone On and Off Turning the Phone On 1. Install a charged battery pack or connect the phone to an external power source such as the cigarette lighter adapter or car kit. 2. Press [END/PWR] for a few seconds until the red light on the top of the phone flashes. ??Fully extend the antenna for the best performance. <Note> Like any other radio device, avoid any unnecessary contact with the antenna while your phone is on. Turning the Phone Off 1. Press and hold until display screen will be turned off, and then release the key. 2. Protect the antenna by pushing it back into the phone, if extended. Making a Call When you make a call, follow these simple steps: 1. Make sure the phone is turned on. ??If not, press [END/PWR]. 2. Enter the phone number with area code, if needed. 3. Press [SEND]. ??If the phone is locked, enter the lock code. ??“Call Failed” indicates that the call did not go through. 4. Press [END/PWR] to disconnect the call. Correcting Dialing Mistakes If you make mistakes in dialing a number, press [CLR] key once to erase the last entered digit or hold down [CLR] for at least two second to delete all digits, or simply press soft key 2 [BACK] to exit dialing state. Receiving Calls 1. When the phone rings, open cellcase or If cellcase is open, press any key (except [END/PWR], [?][?], [?((]) to answer. ??If you press the key [END/PWR], Side Keys ([(][(]) once when you receive a call, you can hold the present call and ring sound or vibration stops. If you press the [END/PWR] key, Side Keys ([(][(]) twice, the present call is terminated. 2. Press [END/PWR] to disconnect the call. In call waiting mode, the present call is on hold as you answer another incoming call. This service is provided by your service provider. When the call waiting function is activated, your phone will beep to let you know if you have an incoming call. Your phone may also display the incoming caller’s identification. Dialing a call from Phone Book You can place a call from any memory location either by speed dialing or by pressing [SEND] while looking up the memory location. One-Touch Dialing : One-touch dialing is a convenient feature which enables you to dial frequently used numbers in your speed-dial data by pressing a key . ??Entry 9 is designated to Emergency Call. ??For locations 1 to 8, you can use one-touch dialing (if enabled, see “One-Touch” on page 9.) by pressing and holdin…
Text truncated - open the document above for the full version.
Jan 20. 2004 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 In re : LG Electronics Inc.. FCC ID: BEJRD2230 Single - Mode Cellular Phone (CDMA) Part 22 Certification Request for Confidentiality Gentlemen: In accordance with 0.459 of CFR 47, LG Electronics, Inc. hereby requests confidentiality of the Block Diagram, Schematic Diagrams, Operational Description, Technical Description, Parts List, and Tune-Up Procedure for the above-referenced certification application. These documents contain detailed system and equipment description and related information about the product which LG Electronics Inc. Considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, LG Electronics Inc. considers this information to be of benefit to its competitors, such that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, E.S.Park Research Engineer CDMA Handset Lab LG Electronics Inc. Tel : 82- 2- 850-3850 Fax : 82- 2- 850-3855 [email protected] 459- 9, Kasan-dong,Kemchun-ku Seoul 153- 023, Korea LG Electronics Inc. LGE
AFFIDAVIT FOR ESN PROTECTION OF CELLULAR MOBILE TELEPHONES We hereby certify that the LGE Handheld Portable Cellular Telephone(FCC ID: BEJRD2230) is so designed that it complies with all the requirements for ESN protection specified in section 22.919 of the FCC Rules. A) The transmitter in service has a unique ESN. B) The ESN host component is permanently attached to a main circuit board of the mobile transmitter and the integrity of the unit operating software cannot be altered. The ESN is plated from fraudulent contact and tampering. The ESN is encoded using multiplication by a polynomial and the ESN data programmed in the memory with other information. C) The ESN is factory-set and cannot be altered, transferred, removed or otherwise able to be manipulated. Cellular mobile equipment is specifically designed such that any attempt to remove, tamper with, or change the ESN chip, its logic system, or firmware originally programmed by the manufacturer will render the mobile transmitter inoperative. Sincerely, E.S.Park Research Engineer CDMA Handset Lab LG Electronics Inc. Tel : 82-2-850-3850 Fax : 82-2-850-3855 [email protected] 459-9, Kasan-dong,Kemchun-ku Seoul 153-023, Korea LG Electronics Inc. LGE
FCC ID : BEJRD2230 YVG] 1. External View FCC ID : BEJRD2230 ZVG]
PROPOSED FCC ID LABEL AND LOCATION LG ELECTRONICS INC. This device complies with Part 22 of the FCC Rules. FCC ID Label
FCC ID : BEJRD2230 [VG] 2. Internal View FCC ID : BEJRD2230 \VG] FCC ID : BEJRD2230 ]VG]
ᄌᦝጁᱧ 㧯㨔㨍㨚㨓㨑ޓ㧴㨕㨟㨠㨛㨞㨥 ᄌᦝጁᱧ 㧯㨔㨍㨚㨓㨑ޓ㧴㨕㨟㨠㨛㨞㨥 6[RG0Q559ޓ# 559#559# 559# 5RGEKHKECVKQP5JGGV0Q ޓޓޓ⇟ 0Q ᄌᦝ &CVG ᄌ ᦝ ౝ %QPVGPVUQH%JCPIG 2003.03.06 Constitution 559 6ޓJKUURGEKHKECVKQPKUCRRNKECDNGVQ%JKR6[RG#PVGPPCECTTKGFKPVJGEGNNWNCTRJQPGVGTOKPCNQH 5KPING$CPF %&/# ޓᧄ᭽ᦠߪ 5KPING$CPF #/&% ߩ៤Ꮺ㔚┵ᧃᯏߦタࠆࠇߐ %JKR6[RG#PVGPPC ߡߟߦㆡ↪ޕࠆߔ 559ޓ# 5ޓ+WPKVYKNNDGWUGFWPNGUUCP[URGEKCNKVKGUCTGCPPQWPEGF ޕࠆߔ↪ࠍන +5ޔࠅ㒢ߥ߇⺑ߥ.ޓ ! $CPF Ꮺၞಽ 6:4: (TGSWGPE[ ᵄᢙ 㨪/*\ 㨪/*\ " 0ޓQOKPCN+ORGFCPEG㧦ǡ ޓၮḰ୯㧦ǡ #$% 8594ޓQRVKOK\CVKQPKURGTHQTOGFD[OCVEJKPIEKTEWKVKPCEVWCNEGNNWNCTRJQPG ޕࠆߔᦨㆡൻࠅࠃߦ㩙㨹㩋㩧㩂㩨࿁〝ߪ 8594 ߡ߅ߦታᯏޓ #$% !"#$#$% 8594ޓUCVKUHKGUVJGHQNNQYKPIVCDNGEJCTCEVGTKUVKE/CVEJKPIEKTEWKVUJQYPKP(KIKUWUGF ޕࠆߔ↪ࠍߩ߽ߔ␜ߦ KI( ߪ㩙㨹㩋㩧㩂㩨࿁〝ޕࠆߔߣߣߎߔߚḩࠍᕈ.ߩਅߪ 8594ޓ (TGSWGPE[$CPF ᵄᢙᏪ 㨪/*\㨪/*\ 8594 6.8nH 1.5pF Fig 3.3.1 Matching circuit 559 &! #$% !"#$#$%% 8594ޓKUOGCUWTGFCVUVCPFCTFDQCTFUJQYPKP(KI ޕࠆࠇߐ᷹ቯߡ߅ߦᮡḰၮ᧼ߔ␜ߦ KI( ߪ 8594ޓ '" ' & () * !"#$+,-./012&'( (TGSWGPE[$CPF ᵄᢙᏪ 㨪/*\㨪/*\ )CKP 㩃㩨㨼㩧 F$KF$K 1.65 2 3 4.8 117.7 99.6100 35 34.6 3.2 12.2 Fig 3.3.2 Standard board Coaxial cable Antenna SSW0900 Microstrip line Matching circuit GND area 99.6*34.6mm 559 ' &! % ( )*3,4-2% ޓ%QQTFKPCVGUCPF/GCUWTGOGPVRNCPGCVTCFKCVKQPRCVVGTPOGCUWTGOGPVCTGFGHKPGFKP(KI C CPF(KI D 4CFKCVKQPRCVVGTPOGCUWTGOGPVKURGTHQTOGFCVOQTGVJCPHTGSWGPEKGUKPENWFKPI VJGJKIJGUVCPFNQYGUVNKOKVHTGSWGPE[QHVJGDCPF ޓ㩔㩩㩊㨺㩧ߩ᷹ቯޔߡ߅ߦᐳᮡ♽ߣ᷹ቯ㕙ߪ (KI C ߮ (KI D ࠅࠃߦቯ⟵ޕࠆࠇߐ㩔㩩 ޕࠆߔ᷹ቯߢᵄᢙߩએߟ㧞ޔࠍਅ㒢ᵄᢙߩ↪Ꮺၞߪ㩊㨺㩧 E2 CW (c) Z Y X Fig 3.4.2(a) Coordinates H CW (a) E1 CW (b) Fig 3.4.2(b) Measurement Plane 559 5(6% 7 5 &8 (6% 7&+ ,-. ޓ9 OKP9% 5 ! 7(6% 7 ,-./0 +ޓVKUPGEGUUCT[VQIGPGTCVGPQRTQDNGOQPCPVGPPCCRRGCTCPEGCHVGTNQCFKPIVJGGNGEVTKERQYGT QH9VQVJGHGGFKPIRQKPVCVVJGTQQOVGORGTCVWTGFWTKPIOKPWVGU#PFKVKUPGEGUUCT[VQUCVKUH[ VJGTGSWKTGOGPVUUJQYPKPCPF ޓቶ᷷ߢ㧡ಽ㑆㨻㩧㩍㩏ߩ⛎㔚ὐߦ⹜㛎ᓟޔߟ߆ޕߥࠄߥߪߡߓ↢ࠍਇౕวߦᄖⷰޔᓟߚߒශടࠍ㔚ജߩ 9 ޕߥࠄߥߪߡߊߥߐߚḩࠍ㔚᳇⊛ⷐ᳞ߩ ߮ ߽ '"! 9* ! 12 ' : ! 3456 ޓ&KOGPUKQPHQNNQYUVJGHQNNQYKPIHKIWTG ޕ߁ᓥߦਅ࿑ߪᄖᒻኸᴺޓ ޓ(KIޓ&KOGPUKQPᄖᒻኸᴺ 16.4 r 0.25 17.4 r 0.25 1 r 0.1 1 r 0.1 4.8 r 0.15 1.5 r 0.15 2 r 0.2 2 r 0.2 0.2 r 0.1 2KP(GGFKPI 2KP0% 559 5; (78 5 9 79:;<=/0 Ԙ(KTUVN[NGCXKPICPCPVGPPCVQVJGVGORGTCVWTG6 .1 HQTJQWT ԙ5GEQPFN[VJGCPVGPPCKUNGHVVQVJGVGORGTCVWTGQH6 *1 D[UCOGOGVJQFHQTJQWT E[ENGUQHVJKUQRGTCVKQP TGHGTVQ(KI CTGVQDGTGCRGCVGF㧔4GNCVKXGJWOKFKV[OWUVDG OCKPVCKPGF㧕#HVGTVJGCDQXGE[ENGVGUVVJGCPVGPPCOWUVPQVJCXGCPQWVGTFCOCIGCPFCNUQ KVOWUVRCUUTGSWKTGOGPVUUJQYPKPCPF 6 ᤨ㑆 ࠍ࠽࠹ࡦࠕޓ .1 6 ᤨ㑆 ߢᣇᴺߓหޔᓟߚߒ⟎ߦ᷷ᐲߩ *1 )d(ᆑߩߎޕࠆߔ⟎ߦ᷷ᐲߩ㧔(KI ⹜㛎ᓟޕ ࠆߔ⛽ᜬࠍ㧑 ߪ⋧ኻḨᐲޔߒૉ ࠆߔታᣉߡߒࠅ➅ࠍ࡞ࠢࠗࠨ ߡߒߦ࡞ࠢࠗࠨ ࠍ ෳᾖ ޕߥࠄߥ߫ࠇߌߥߐߚḩࠍⷐ᳞㗄ࠆࠃߦ ߮ ߟ߆ޔߊߥ߇៊்ߥᄖⷰ⊛߽ߦ &KURNC[ ␜ FKXKUKQP ಽ VGORGTCVWTG ᷷ᐲ 6 .1 .QYGTVGORGTCVWTGE[ENKPI ૐ᷷ %[ENKPI ͠ 6 *1 *KIJGTVGORGTCVWTGE[ENKPI 㜞᷷ %[ENKPI ͠ (KIޓ6GORGTCVWTGE[ENKPIޓ᷷ᐲ %[ENKPI ͠ 6 *1 6 .1 6GOR͠ 㧴㨞㧴㨞㧴㨞㧴㨞 %;%.' 6+/'*1745 559 5 < ! = ! >>9>?/0 6JGCPVGPPC UEJCTCEVGTKUVKEUCTGVQDGOGCUWTGFCHVGTNGCXKPIKVKPVJGDCVJHQTJQWTUWPFGT EQPFKVKQPUJQYPDGNQY#HVGTVJGCDQXGVJGCPVGPPCOWUVPQVJCXGCPQWVGTFCOCIGCPFCNUQKVOWUV RCUUTGSWKTGOGPVUUJQYPKPCPF ߦᕡ᷷ᕡḨᮏߢ᧦ઙߩਅࠍ࠽࠹ࡦࠕޓ៊்ߥᄖⷰ⊛߽ߦ⹜㛎ᓟޕࠆߔ᷹ቯࠍᕈ.ߩߘޔᓟߚߒᤨ㑆⟎ ޕߥࠄߥ߫ࠇߌߥߐߚḩࠍⷐ᳞㗄ࠆࠃߦ ߮ ߟ߆ޔߊߥ߇ 6GORGTCVWTG ᷷ᐲ 4GNCVKXGJWOKFKV[ ⋧ኻḨᐲ 6GUVKPIVKOG ⹜㛎ᤨ㑆 r͠r㧑r㧴㨞 5 7 ! @A9:/0 1ޓRGTCVKPIVGORGTCVWTGTCPIG㧦͠㨪 ͠ 㧑KPTGNCVKXGJWOKFKV[ 9ޓJGPQRGTCVKPIKPVJGCDQXGOGPVKQPGFVGORGTCVWTGTCPIGVJGCPVGPPCOWUVPQVJCXGCPQWVGTFCOCIG CPFCNUQKVOWUVRCUUTGSWKTGOGPVUUJQYPKPCPF ޓേ᷷ᐲ⹜㛎▸࿐㧦͠㨪 ͠ ⋧ኻḨᐲޓ㧑 ߌߥߐߚḩࠍⷐ᳞㗄ࠆࠃߦ ߮ ߟ߆ޔߊߥ߇៊்ߥᄖⷰ⊛ޔേᤨߩߢ᷷ᐲ▸࿐ߩ⸥ޓ ޕߥࠄߥ߫ࠇ 5 ' 7 ! BC9:/0 6ޓJG5VQTCIG6GORGTCVWTG6GUVJCUGZRGTKOGPVU ޓ(KTUVCNQYVGORGTCVWTGUVQTCIGVGUVYKNNDGGZCOGF#HVGTNGCXKPICPVGPPCCV͠HQTJQWTU KVYKNNDGKPCTQQOVGORGTCVWTGHQTJQWTU ޓ#JKIJVGORGTCVWTGUVQTCIGVGUVYKNNDGGZCOGF#HVGTNGCXKPIKVCV͠UKOKNCTN[HQTJQWTU KVYKNNDGNGHVKPCTQQOVGORGTCVWTGHQTJQWTU ޓ'CEJGZCOKPCVKQPKURGTHQTOGFWPFGTVJGGPXKTQPOGPVQHQHTGNCVKXGJWOKFKV[ ޓ#HVGTVJGCDQXGVJGCPVGPPCOWUVPQVJCXGCPQWVGTFCOCIGCPFCNUQKVOWUVRCUUTGSWKTGOGPVU UJQYPKPCPF ޕࠆࠇࠄߌಽߦ㜞᷹᷷ቯૐ᷷ߪ᷷ᐲ臣⬿⹜㛎ޓ ޕ߁ⴕߦᓟߚߒᤨ㑆⟎ ߢᏱ᷷ޔᓟߚߒᤨ㑆⟎ ߢ͠ޔߪૐ᷷臣⬿⹜㛎ߕ߹ޓ ޓ㜞᷷臣⬿⹜㛎ߪห᭽ ߦ͠ ߢ ᤨ㑆⟎ߚߒᓟޔᏱ᷷ ߢ ᤨ㑆⟎ߚߒᓟߦⴕޕ߁ ޕ߁ⴕߢਅߩ⋧ኻḨᐲߩ㧑 ߽ࠇߕߪ⹜㛎 ࠇߌߥߐߚḩࠍⷐ᳞㗄ߥ㔚᳇⊛ࠆࠃߦ ߮ ߟ߆ޔߊߥ߇៊்ߥᯏ᪾⊛߮ᄖⷰޔ⹜㛎ᓟޓ ޕߥࠄߥ߫ 559 5 5# ! D@/0 ޓ$GHQTGXKDTCVKQPVGUVVJGCPVGPPC UGNGEVTKECNEJCTCEVGTKUVKEPGGFUVQDGOGCUWTGF ޓ#HVGTVJGCDQXGUVGRCPCPVGPPCYKNNDGCVVCEJGFVQCXKDTCVKQPVGUVGSWKROGPV 6ޓJGXKDTCVKQPVGUVYKNNDGECTTKGFQWVHQTJQWTKPVJGFKTGEVKQPUQH:;CPF<WPFGTEQPFKVKQP UJQYPDGNQY ޓ#HVGTVJGCDQXGVJGCPVGPPCOWUVPQVJCXGCPQWVGTFCOCIGCPFCNUQKVOWUVRCUUTGSWKTGOGPVU UJQYPKPCPF ޕࠆߡ┙ߺ⚵ࠍ࠽࠹ࡦࠕߦ⹜㛎ⵝޔᓟߚߒ᷹ቯࠍᕈ.㔚᳇⊛ߩ࠽࠹ࡦࠕߦ೨ߩ⹜㛎ޓ:; ߩᣇะߦฦޘ ⷐߥ㔚᳇⊛ࠆࠃߦ ߮ ߟ߆ޔߊߥ߇៊்ߥᯏ᪾⊛߮ᄖⷰޔ⹜㛎ᓟޕࠆߔታᣉࠍᤨ㑆⹜㛎 ޕߥࠄߥ߫ࠇߌߥߐߚḩࠍ᳞㗄 1UEKNNCVKPIHTGSWGPE[ ᝄേᵄᢙ 5YGGR6ޓKOG ᒁᤨ㑆 CORNKVWFG ᝄ 6JGOCZKOWOCEEGNGTCVKQP ᦨᄢടᄕᐲ 㨪*\ ಽOOI 559 ?() 7 EFGH 559 @%: IJKL @ &"<9<%A#$%%(< @ <(% (TGSWGPE[ )*\ 8594 (TGSWGPE[ …
Text truncated - open the document above for the full version.
SAR Measurement Report Test Date : Dec 29~30, 2003 FCC ID : BEJRD2230 Test Report No: LGE-SAR2004001 LG ELECTRONICS INC. CDMA HANDSETS LABORATORY MO BILE HANDSETS COMPANY 459-9, Kasan-don, Keumchun -ku Seoul 153-023, Korea TEL: +82-2-850-3860 FAX: +82-2-850-3855www.lge.com - 1/22 - SAR Compliance Test Report APPLICANT NAME & ADDRESS:DATE & LOCATION OF TESTING: LG ELECTRONICS INC. Dates of tests: Dec 29~30, 2003 Communication Terminal Research Lab Test Site: LG ELECTRONICS, SEOUL Korea 459-9, Kasan-don, Keumchun-ku Seoul 153-023, Korea Attn: S.S. Kim , President Test Device Test Report No. LGE-S A R2004001 Number of Page 58 Contact Person S. S. Kim Responsible Test Engineer E. S. Park Testing has been Carried out in Accordance with IEEE P1528-200X Draft 6.4 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate(SAR) in the Human Body Due to Wireless Communications Device : Experimental Techniques Application Type Certification FCC Classification Licensed Portable Transmitter held to ear (PCE) FCC Rule Part(s) 2.1093; FCC/OET Bu lletin 65 Supplement C (July 2001) Test Results The Tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test report shall not be reproduced recept in full, without written approval of the laboratory. Date and Signatures Jan / 19 / 2004 ReportPrepared by Eui - Soon Park Senior Research Engineer Model : LG-RD2230 FCC ID : BEJRD2230 Type : Single-Mode Single-Band Cellular Phone SAR Measurement Report Test Date : Dec 29~30, 2003 FCC ID : BEJRD2230 Test Report No: LGE-SAR2004001 LG ELECTRONICS INC. CDMA HANDSETS LABORATORY MO BILE HANDSETS COMPANY 459-9, Kasan-don, Keumchun -ku Seoul 153-023, Korea TEL: +82-2-850-3860 FAX: +82-2-850-3855www.lge.com - 2/22 - Table of Contents 1. SUMMARY FOR SAR TEST REPORT ...............................................................................................3 1.1 Head Configuration .................................................................................................................3 1.2 Body Worn Configuration ........................................................................................................3 1.3 Measurement Uncertainty ........................................................................................................3 2. INTRODUCTION...............................................................................................................................4 3. DESCRIPTION OF THE DEVICE UNDER TEST ...............................................................................5 3.1 Antenna Description.................................................................................................................5 3.2 Device Description...................................................................................................................5 3.3 Battery Option..........................................................................................................................5 4. TEST CONDITIONS ..........................................................................................................................6 4.1 Ambient Conditions..................................................................................................................6 4.2 RF Characteristics of The Test Site........................................................................................6 4.3 Test Signal, Frequencies, And Output Power ..........................................................................6 5. DESCRIPTION OF THE TEST EQUIPMENT ....................................................................................7 5.1 Test System Specifications......................................................................................................7 5.2 SAR Measurement Setup..........................................................................................................7 5.3 DASY4 E-Field Probe System..................................................................................................8 5.4 Phantom & Equivalent Tissues..............................................................................................10 6. DESCRIPTION OF THE TEST PROCEDURE ..................................................................................12 6.1 Definition of Reference Point ................................................................................................. 12 6.2 Test Configuration Positions.................................................................................................. 13 6.3 Scan Procedures.....................................................................................................................16 6.4 SAR Averaging Methods.........................................................................................................16 7. MEASUREMENT UNCERTAINTY...................................................................................................17 8. SYSTEM VERIFICATION................................................................................................................18 8.1 Tissue Verification.................................................................................................................18 8.2 Test System Validation.......................................................................................................... 18 9. RESULTS........................................................................................................................................19 10. REFERENCE..................................................................................................................................22 APPENDIX A : Validation Test Data APPENDIX B : SAR Test Setup Photographs APPENDIX C : SAR Test Data APPENDIX D : Calibration Certificates SAR Measurement Report Test Date : Dec 29~30, 2003 FCC ID : BEJRD2230 Test Report No: LGE-SAR2004…
Text truncated - open the document above for the full version.
1/1 Report No.: 00431-4529-C4005 LG Electronics Inc. Q & R Center, 36, Munlae-dong, 6-ga, Youngdungpo-gu, Seoul, Korea Tel:+82-2-2630-3077~9, Fax:+82-2-2635-5543 LG Electronics Inc. Quality & Reliability Center 36, Munlae-dong, 6-ga, Youngdungpo-gu, Seoul 150-096, Korea Tel: + 82 2 2630 3077~9, Fax: +82 2 2635 5543 CERTIFICATION OF COMPLIANCE Date of Issue: January 20, 2004 Test Report No: 00431-4529-C4005 Applicant: LG Electronics Inc. Regulation: FCC Part 22 , Part2 Test procedure: ANSI C63.4-2001, TIA/EIA603 Equipment Class: Intentional Radiators EUT Type: Single Band, Single Mode CDMA Mobile Phone FCC ID: BEJRD2230 Trade Name(s): Model No.: LG LG-RD2230 This device has been verified to comply with the applicable requirements in the FCC Part 22 & Part2 and was tested in accordance with the measurement procedures specified in ANSI C63.4- 2001, TIA/EIA 603. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Kyeom-Soon Kim / General Manager Quality and Reliability Center LG Electronics Inc. 2/2 Report No.: 00431-4529-C4005 LG Electronics Inc. Q & R Center, 36, Munlae-dong, 6-ga, Youngdungpo-gu, Seoul, Korea Tel:+82-2-2630-3077~9, Fax:+82-2-2635-5543 REPORT FOR AN INTENTIONAL RADIATORS U.S. Responsible Party: Address: LG Electronics USA Inc. 6133 North River Road, Suite 1100 (Riverway Plasza) Rosemont, IL 60018, USA Contact Person: P. H. Byun, General Manager Telephone No.: (847) 692-4630 EXT.329 Manufacturer: LG Electronics Inc. Address: 459-9, Kasan-Dong, Kunchon-Gu, Seoul, 153-023, Korea FCC ID No.: BEJRD2230 EUT Class: Intentional Radiators EUT Type: Single Band, Single Mode CDMA Mobile Phone Trade Name: LG Model No.: LG-RD2230 Rule Part: FCC Part 22, Part2 Test Procedure: ANSI C63.4-2001, TIA/EIA603 Date of Test: January 5 ~ 16, 2004 Date of Receipt of EUT: January 5, 2004 Date of Issue: January 20, 2004 Test Report No.: 00431-4529-C4005 Test Result: Positive Quality and Reliability Center authorizes the above-named applicant to reproduce this report provided it is reproduced in its entirety. Quality and Reliability Center reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production unit of this model are manufactured with identical electrical and mechanical components. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Tested by: Reviewed by: Y. S. Lee / Senior Research Engineer Quality and Reliability Center LG Electronics Inc. J. C. Lee / Senior Research Engineer Quality and Reliability Center LG Electronics Inc. 3/3 Report No.: 00431-4529-C4005 LG Electronics Inc. Q & R Center, 36, Munlae-dong, 6-ga, Youngdungpo-gu, Seoul, Korea Tel:+82-2-2630-3077~9, Fax:+82-2-2635-5543 CONTENTS Page 1. GENERAL INFORMATION ..................................................................................................................... 4G 1.1 D ESCRIPTIONS OF EQUIPMENT UNDER TEST (EUT)................................................................................... 4G 1.2 R EGULATIONS APPLIED TO EUT ............................................................................................................... 4G 1.3 M EASUREMENT PROCEDURE.................................................................................................................... 4G 1.4 M EASUREMENT PLACE............................................................................................................................. 4G 2. TEST SITE ................................................................................................................................................... 4G 2.1 S EMI-ANECHOIC CHAMBER....................................................................................................................... 4G 2.2 A SHIELDED ENCLOSURE.......................................................................................................................... 4G 3. CALIBRATIONS OF MEASURING INSTRUMENTS .......................................................................... 5G 4. DESCRIPTION OF TEST CONDITION .................................................................................................. 5G 4.1 RF P OWER OUTPUT.................................................................................................................................. 5G 4.2 M ODULATION CHARACTERISTICS............................................................................................................. 7G 4.3 O CCUPIED BANDWIDTH............................................................................................................................ 8G 4.4 S PURIOUS EMISSION AT ANTENNA TERMINAL.......................................................................................... 9G 4.5 F IELD STRENGTH OF SPURIOUS RADIATION.............................................................................................. 9G 4.6 F REQUENCY STABILITY.......................................................................................................................... 11G 5. TEST DATA ............................................................................................................................................... 12G 5.1. RF P OWER OUTPUT (§2.1046) .............................................................................................................. 12G 5.2. M ODULATION CHARACTERISTICS (§2.1047) ......................................................................................... 13G 5.3. O CCUPIED BANDWIDTH (§2.1049) ........................................................................................................ 13G 5.4. S PURIOUS EMISSION AT ANTENNA TERMINAL (§2.1051) ........................................................…
Text truncated - open the document above for the full version.
XVGXZ FCC ID : BEJRD2230 APPENDIX A : Test Graph 1. Conducted Output Power 2. Occupied Bandwidth 3. 26 dB Emission Bandwidth 4. Band Edge 5. Out of Band Emission 6. CDMA Mobile Emission in Base Frequency Range YVGXZ FCC ID : BEJRD2230 1. Conducted Output Power 1.1 Low Channel 1.2 Middle Channel ZVGXZ FCC ID : BEJRD2230 1.3 High Channel [VGXZ FCC ID : BEJRD2230 2. Occupied Bandwidth 2.1 Low Channel 2.2 Middle Channel \VGXZ FCC ID : BEJRD2230 2.3 High Channel ]VGXZ FCC ID : BEJRD2230 3. 26 dB Emission Bandwidth 3.1 Low Channel 3.2 Middle Channel ^VGXZ FCC ID : BEJRD2230 3.3 High Channel _VGXZ FCC ID : BEJRD2230 4. Band Edge 4.1 Low Channel 4.2 High Channel `VGXZ FCC ID : BEJRD2230 5. Out of Band Emission 5 .1 Low Channel XWVGXZ FCC ID : BEJRD2230 5.2 Middle Channel XXVGXZ FCC ID : BEJRD2230 5.3 High Channel XYVGXZ FCC ID : BEJRD2230 6. CDMA Mobile Emission in Base Frequency Range 6.1 Low Channel 6.2 Middle Channel XZVGXZ FCC ID : BEJRD2230 6.3 High Channel
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 1 | 22H | 824.7 MHz - 848.31 MHz | 331.00 mW | 1M25F9W | 2.5000000000 ppm |

Telematics
Equipment Class
DTS - Digital Transmission SystemNotebook Computer
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterStylus Pen
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzRF Module
Equipment Class
FDS - Part 15 Field Disturbance SensorTelematics
Equipment Class
NII - Unlicensed National Information Infrastructure TX