BEJS47113HAHOUSEHOLD ELECTRIC RANGE

OWNER'S MANUAL ELECTRIC RANGE Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times. ENGLISH LSIL6334** MFL68920556 Rev.00_082223 www.lg.com Copyright © 2023 LG Electronics Inc. All Rights Reserved. Scan to see the online manual. TABLE OF CONTENTS 2 4IMPORTANT SAFETY INSTRUCTIONS 4READ ALL INSTRUCTIONS BEFORE USE 4 Safety Messages 4 Anti-tip Device 5WARNING 5 Installation 5 Operation 6 Maintenance 6Risk of Fire and Flammable Materials 7CAUTION 7 Operation 7 Maintenance 8PRODUCT OVERVIEW 8Product Features 8 Exterior & Interior 8 Product Specifications 9 Accessories 10 INSTALLATION 10Before Installing 10 Installation Overview 10 Tools Needed 11 Parts 11 Unpacking and Moving the Range 13Choosing the Proper Location 13 Dimensions and Clearances 15 Electricity 15 Flooring 15 Ambient Temperature 16Leveling 16 Leveling the Range 16Connecting Electricity 16 Electrical Requirements 17 Connecting the Power Cord / Conduit 21Optional Rear Filler 21 Installing the Rear Filler 21Anti-tip Device 21 Installing the Anti-tip Device 22Test Run 22 Test the Range Before Use 24 OPERATION 24Control Panel 24 Control Panel Features 25 Knob Features 26Changing Oven Settings 26 Clock 26 Oven Light 26 Timer On/Off 26 Wi-Fi 27 Settings (Hour Mode, Convection Auto Conversion, Calibrating the Oven Temperature, Preheat Alarm Light, Beeper Volume, Fahrenheit or Celsius, Cooktop on Alert Volume) 28 Control Lock 29 Cook Time (Timed Cook) 30 Minimum & Maximum Default Settings 30Cooktop 30 Precautions when using the Cooktop 32 Cooking Areas 32 Benefits of Induction Surface Cooking 32 Induction Cookware 33 Cookware Placement 33 Pan Sensing 34 Minimum and Maximum Pan Size 34 Home Canning 35 Using the Cooking Elements 35 The Recommended Surface Cooking Setting 35 Power Management 36Oven 36 Before Using the Oven 36 Oven Vent 36 Using Oven Racks 37 Bake 37 Convection Mode 38 Recommended Baking Guide 38 Broil 39 Recommended Broiling Guide 41 Air Fry 43 Recommended Air Frying Guide 44 Remote Start 44 Using the Sabbath Mode 3 46 SMART FUNCTIONS 46LG ThinQ Application 46 LG ThinQ Application Features 46 Installing LG ThinQ Application and Connecting an LG Appliance 47 Installing the LG ThinQ Application 47 Connecting to Wi-Fi 47 LG UP Feature 48 RF Module Specifications 48 FCC Statement 48 FCC RF Radiation Exposure Statement 48 Open Source Software Notice Information 48Smart Diagnosis TM Feature 48 Using LG ThinQ to Diagnose Issues 49 Using Audible Diagnosis to Diagnose Issues 50 MAINTENANCE 50Cleaning 50 Interior 50 Exterior 52 Cooktop Surface 55 EasyClean 57 Self Clean 59 Removing/Assembling Lift-Off Oven Doors 60 Removing/Assembling Drawers 61 Removing/Assembling the Vent Trim 61Periodic Maintenance 61 Changing the Oven Light 63 TROUBLESHOOTING 63FAQs 63 Frequently Asked Questions 65Before Calling for Service 65 Cooking 67 Parts & Features 69 Noises 70 Wi-Fi 71 LIMITED WARRANTY 71USA 71 TERMS AND CONDITIONS 71 THIS LIMITED WARRANTY DOES NOT COVER: 74 PROCEDURE FOR RESOLVING DISPUTES: 4IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Download this owner's manual at http://www.lg.com Safety Messages Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what may happen if the instructions are not followed. Anti-tip Device To reduce the risk of tipping, the appliance must be secured by a properly installed anti-tip device. To check if the device is installed properly, verify that the anti-tip device is engaged, or grasp the top rear edge of the range back guard and carefully attempt to tilt it forward. Refer to the installation section for instructions. WARNING • A child or adult can tip the range and be killed. • Install the anti-tip device to the structure and/or the range. Verify the anti-tip device has been properly installed and engaged by following the guide on the anti-tip bracket template. • Engage the range to the anti-tip device by following the guide on the anti-tip bracket template. Ensure the anti-tip device is re-engaged when the range is moved by following the guide on the anti-tip bracket template. • Re-engage the anti-tip device if the range is moved. Do not operate the range without the anti-tip device in place and engaged. • See installation instructions for details. • Failure to do so can result in death or serious burns to children or adults. • Do not rest large, heavy items such as whole turkeys on the open oven door. The range could tip forward and cause injury. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION. These words mean: WARNING You may be killed or seriously injured if you do not follow instructions. CAUTION You may be injured or cause damage to the product if you do not follow instructions. 5IMPORTANT SAFETY INSTRUCTIONS ENGLISH • Do not step or sit on the oven door. The range could be tipped and injury might result from spilled hot liquid, food, or the range itself. • Never remove the oven legs. The range will not be secured to the anti-tip bracket if the legs are removed. WARNING WARNING • To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following: Installation • Do not line the oven walls, racks, bottom, or any other part of the oven with aluminum foil or any other material. Doing so will disrupt heat distribution, produce poor baking results and cause permanent damage to the oven interior. (Aluminum foil will melt to the interior surface of the oven.) • To eliminate the risk of bur…

Text truncated - open the document above for the full version.

LG Electronics USA, Inc. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: LG Electronics USA, Inc. Address: 111 Sylvan Avenue, North Building Englewood Cliffs, New Jersey, 07632, United States Product Name: HOUSEHOLD ELECTRIC RANGE FCC ID: BEJS47113HA Model(s): LSIL6334FE, LSIL6334*E 2.911(d)(5)(i) Equipment Type We, LG Electronics USA, Inc. (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Heejae Cho Date: September 27, 2023 Title and Company name: Director, Regulatory and Environmental Affairs / LG Electronics USA, Inc. NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

LG Electronics USA, Inc. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: LG Electronics USA, Inc. Address: 111 Sylvan Avenue, North Building Englewood Cliffs, New Jersey, 07632, United States Product Name: HOUSEHOLD ELECTRIC RANGE FCC ID: BEJS47113HA Model(s): LSIL6334FE, LSIL6334*E 2.911(d)(5)(ii) Applicant filing We, LG Electronics USA, Inc. (“the applicant”) certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Heejae Cho Date: September 27, 2023 Title and Company name: Director, Regulatory and Environmental Affairs / LG Electronics USA, Inc. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

LG Electronics USA, Inc. 2.911 (d)(7)USA Agent v1.3 Section 2.911(d)(7) USA Agent for Service of Process (Applicant is Both Grantee and U.S. Agent) Company name: LG Electronics USA, Inc. Address: 111 Sylvan Avenue, North Building Englewood Cliffs, New Jersey, 07632, United States Product Name: HOUSEHOLD ELECTRIC RANGE Grantee code: BEJ Model(s): LSIL6334FE, LSIL6334*E 2.911(d)(7) USA Designated Agent for Service of Process This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. LG Electronics USA, Inc. 2.911 (d)(7)USA Agent v1.3 Applicant / USA Agent Company name: LG Electronics USA, Inc. Address: 111 Sylvan Avenue, North Building Englewood Cliffs, New Jersey, 07632, United States FCC Grantee Code: BEJ FRN No.: 0023476120 Contact Name: Heejae Cho Telephone No: 1-201-952-0674 Email: [email protected] Signature: Title: Director, Regulatory and Environmental Affairs Date: 2023-09-27 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against- national-security-threats-to-the-communications-supply-chain-through-the

Letter of Authorization Company : LG Electronics USA, Inc. Address : 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States Product Name : HOUSEHOLD ELECTRIC RANGE Model Number : LSIL6334FE, LSIL6334*E FCC Identifier : BEJS47113HA We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Hee Jae Cho Date: September 27, 2023 Title: Director, Regulatory and Environmental Affairs Signature of applicant:

LG Electronics USA, Inc. Date: September 27, 2023 RE: New Family Listing Declaration Please review the attached exhibits supporting our request for applying New Family Listing to the FCC ID: BEJS47113HA for Company Name: LG Electronics USA, Inc. Product Description: HOUSEHOLD ELECTRIC RANGE Base model: LSIL6334FE Additional model(s): LSIL6334*E The only difference between the base model LSIL6334FE and the additional model(s) LSIL6334*E is as follows: Definition of variables: LSIL6334FE, LSIL6334*E Variable Range of variable Content 1st ‘*’ A to Z Cosmetic features. Sho uld you have any questions, please contact us. Sincerely, Hee Jae Cho / Director LG Electronics USA, Inc.

LG Electronics USA, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 27, 2023 Subject; Request for Confidentiality FCC ID: BEJS47113HA To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Software Configuration Control Declaration Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Hee Jae Cho Title: Director, Regulatory and Environmental Affairs

P age 1 of 8 APPENDIX B [EXTERNAL PHOTOGRAPHS] Page 2 of 7 Page 3 of 7 Page 4 of 7 Page 5 of 7 Page 6 of 7 Page 7 of 7 Page 1 of 1 IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : BEJS47113HA Contains FCC ID : BEJ-LCWB001

Page 1 of 1 IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : BEJS47113HA Contains FCC ID : BEJ-LCWB001

Pa ge 1 of 8 APPENDIX C [INTERNAL PHOTOGRAPHS] Page 2 of 19 Page 3 of 19 Page 4 of 19 Page 5 of 19 Page 6 of 19 Page 7 of 19 Page 8 of 19 Page 9 of 19 Page 10 of 19 Page 11 of 19 Page 12 of 19 Page 13 of 19 Page 14 of 19 Page 15 of 19 Page 16 of 19 Page 17 of 19 Page 18 of 19 Page 19 of 19 Page 1 of 1 IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : BEJS47113HA Contains FCC ID : BEJ-LCWB001

Page 1 of 7 Report No.: OT-239-RED-086 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-EMC-004(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) FCC 47 CFR PART 18 TEST REPORT Test Report No. : OT-239-RED-086 Reception No. : 2309003016 Applicant : LG Electronics USA, Inc. Address : 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States Manufacturer : LG Electronics USA, Inc. Address : 170, Seongsanpaechong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do 51533 Korea Type of Equipment : HOUSEHOLD ELECTRIC RANGE Model Name : LSIL6334FE Multiple Model Name : LSIL6334*E FCC ID. : BEJS47113HA Serial number : N/A Total page of Report : 7 pages (including this page) Date of Incoming : September 21, 2023 Date of Issuing : September 27, 2023 summary The equipment complies with the requirement of FCC CFR 47 PART 18(§ 18.313). This test report contains only the results of a single test of the sample supplied for the examination. It is not a general valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Reviewed by: Approved by: Sang-Hyun, Jeong / Sr. Engineer EMC Testing Div. ONETECH Corp. Seung-Hyun, Park / Sr. Engineer EMC Testing Div. ONETECH Corp. Page 2 of 7 Report No.: OT-239-RED-086 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-EMC-004(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 4 2. GENERAL INFORMATION ............................................................................................................................................ 5 2.1 PRODUCT DESCRIPTION ................................................................................................................................................. 5 2.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 5 3. EUT MODIFICATIONS .................................................................................................................................................... 5 4. SUMMARY OF TEST RESULTS .................................................................................................................................... 6 4.1 TEST EQUIPMENT USED ................................................................................................................................................. 6 Page 3 of 7 Report No.: OT-239-RED-086 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-EMC-004(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) Revision History Rev. No. Issue Report No. Issued Date Revisions Section Affected 0 OT-239-RED-086 September 27, 2023 Initial Release All * Please contact us (e-mail: [email protected]) for verification of this test report. Page 4 of 7 Report No.: OT-239-RED-086 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-EMC-004(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 1. VERIFICATION OF COMPLIANCE APPLICANT LG Electronics USA, Inc. 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States MANUFACTURER LG Electronics USA, Inc. 170, Seongsanpaechong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do 51533 Korea FACTORY LG Electronics USA, Inc. 170, Seongsanpaechong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do 51533 Korea E.U.T. DESCRIPTION HOUSEHOLD ELECTRIC RANGE MEASUREMENT PROCEDURES MP-5: 1986 TYPE OF EQUIPMENT TESTED Pre-Production KIND OF EQUIPMENT AUTHORIZATION REQUESTED Certification STANDARDS FCC Part 18, Section 18.313 MODIFICATIONS ON THE EQUIPMENT TO ACHIEVE COMPLIANCE None FINAL TEST WAS CONDUCTED ON 10 m semi anechoic chamber ONETECH Corp. tested the above equipment in accordance with the requirements set forth in the above standard. The test results show that equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Page 5 of 7 Report No.: OT-239-RED-086 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-EMC-004(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 2. GENERAL INFORMATION 2.1 Product Description The LG Electronics USA, Inc., Model LSIL6334FE (referred to as the EUT in this report) is a HOUSEHOLD ELECTRIC RANGE. The product specification described herein was obtained from product data sheet or user’s manual. CHASSIS TYPE Metal & Plastic Temperature Range -40 °C ~ +85 °C LIST OF EACH OSC. or CRY. FREQ. (FREQ. >= 1 MHz) 10 MHz RF OPERATING FREQUENCY Wi-Fi 2.4 GHz (Wi-Fi Module Model: LCWB-001) * Wi-Fi Module FCC ID : BEJ-LCWB001 NUMBER OF PCB LAYERS - P. C. Board name - Induction cooking range Operating frequency (ISM frequency band) 26 kHz ~ 75 kHz ELECTRICAL RATING 120/240 V, 11.4 kW Or 120/208 V, 9.45 kW/ 60 Hz EXTERNAL CONNECTOR AC IN 2.2 Alternative type(s)/model(s); also covered by this test report. LSIL6334FE, LSIL6334*E Variable Range of variable Content 1st ‘*’ A to Z Cosmetic features. 3. EUT MODIFICATIONS -. None Page 6 of 7 Report No.: OT-239-RED-086 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-EMC-004(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-…

Text truncated - open the document above for the full version.

Page 1 of 70 Report No.: OT-239-RED-085 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-EMC-004(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) FCC 47 CFR PART 18 TEST REPORT Test Report No. : OT-239-RED-085 Reception No. : 2309003016 Applicant : LG Electronics USA, Inc. Address : 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, 07632, United States Manufacturer : LG Electronics USA, Inc. Address : 170, Seongsanpaechong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do 51533 Korea Type of Equipment : HOUSEHOLD ELECTRIC RANGE Model Name : LSIL6334FE Multiple Model Name : LSIL6334*E FCC ID. : BEJS47113HA Serial number : N/A Total page of Report : 70 pages (including this page) Date of Incoming : September 21, 2023 Test Period : September 21, 2023 ~ September 26, 2023 Date of Issuing : September 27, 2023 SUMMARY The equipment complies with the requirement of FCC CFR 47 PART 18. This test report contains only the results of a single test of the sample supplied for the examination. It is not a general valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Reviewed by: Approved by: Sang-Hyun, Jeong / Sr. Engineer EMC Testing Div. ONETECH Corp. Seung-Hyun, Park / Sr. Engineer EMC Testing Div. ONETECH Corp. Page 2 of 70 Report No.: OT-239-RED-085 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-EMC-004(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS Page 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 5 2. TEST FACILITY ............................................................................................................................................................... 6 3. PRODUCT INFORMATION ............................................................................................................................................ 7 3.1 DESCRIPTION OF EUT .................................................................................................................................................... 7 3.2 MODEL DIFFERENCES .................................................................................................................................................... 7 3.3 SUPPORT EQUIPMENT .................................................................................................................................................... 8 3.4 SYSTEM CONFIGURATION .............................................................................................................................................. 8 3.5 SYSTEM CONFIGURATION .............................................................................................................................................. 8 3.6 EQUIPMENT MODIFICATIONS ........................................................................................................................................ 8 3.7 INFORMATION OF MEASUREMENT SOFTWARE ............................................................................................................. 8 4. DESCRIPTION OF TESTS .............................................................................................................................................. 9 4.1 TEST METHODOLOGY .................................................................................................................................................... 9 4.2 TEST CONDITION ............................................................................................................................................................ 9 4.3 CONDUCTED EMISSION .................................................................................................................................................. 9 4.4 RADIATED EMISSION ...................................................................................................................................................... 9 5. FINAL RESULT OF MEASUREMENT ....................................................................................................................... 10 5.1 CONDUCTED EMISSION TEST ....................................................................................................................................... 10 5.1.1 Operating Environment ........................................................................................................................................ 10 5.1.2 Test Setup .............................................................................................................................................................. 10 5.1.3 Measurement uncertainty ..................................................................................................................................... 10 5.1.4 Limit ...................................................................................................................................................................... 10 5.1.5 Test Equipment used ............................................................................................................................................. 10 5.1.6 Test Data ............................................................................................................................................................... 11 5.2 RADIATED EMISSION TEST .......................................................................................................................................... 35 5.2.1 Operating Environment ........................................................................…

Text truncated - open the document above for the full version.

Page 1 of 17 APPENDIX A [TEST SET UP PHOTOGRAPHS] Page 2 of 17 Conducted Emission (AC mains power ports) Test Set Up Area 1 Page 3 of 17 Area 2 Page 4 of 17 Area 3 Page 5 of 17 Area 4 Page 6 of 17 Radiated Emission (Below 30 MHz) Test Set Up Area 1 Page 7 of 17 Area 2 Page 8 of 17 Area 3 Page 9 of 17 Area 4 Page 10 of 17 Radiated Emission (Below 1 GHz) Test Set Up Area 1 Page 11 of 17 Area 2 Page 12 of 17 Area 3 Page 13 of 17 Area 4 Page 14 of 17 Radiated Emission Test Set Up (Above 1 GHz) Area 1 Page 15 of 17 Area 2 Page 16 of 17 Area 3 Page 17 of 17 Area 4